Delete workflow item when finished

Hi!
I have a process code triggering WF92100011.
In this WF I have a task TS92100010 that is running IDOCORDERS.INPUTFOREGROUND.
In this task TS92100010 I have two terminating events:
IDOCORDERS.INPUTFINISHED
IDOCORDERS.INPUTERROROCCURRED
Therefore out of the TS..10 there are two Outcomes. One is "Workflow finished" and the other is TS92100008 that should pick up the workitem and move it to another "folder" in the inbox; "Order change - Errors".
(Question 1:)
But this is not happening. Why?
If I look at the workitem in the inbox I can see the error status or the success status. If an order was created I can click the "End process" button. If it was an error I can reprocess the task.
BUT. (Question 2)
I can't delete any of the workitems.
Why?
I'm not a workflow expert but have been sitting with this for a few days now and it's driving me nuts.
So any help is more than appreciated.
Best regards,
Mattias

Ok.
In this case they have been "Actioned" I think!
Because I process the first step = IDOCORDCHG.INPUTFOREGROUND ... but the problem is that after processing neither the task is deleted nor the task is moved to the error folder.
Anyone have another solution? Or am I not understanding the problem?
BR and thank you very much!
// Mattias

Similar Messages

Delete Workflow items from workflow inbox.

Hello All,
We are using workflow in MSS for Compensation Management. As part of this an email will be sent to the managers when a compensation needs an approval. There are some workflow items under workflow inbox ( SBWP ) . How can I delete emails which I don't want to execute. I don't see any delete button. I can see delete buttons for the documents under inbox, but these emails that I want to delete are under workflow in Inbox.
Thanks a lot for your help and points will be rewarded for any helpful solution.
Thanks,
Chakri.

Thank You Suresh,
You are refering to the emails in the inbox ( SBWP ) where I can delete my emails with the help of a delete button. But I am referring to the workflow items that are present under INBOX -> WORKFLOW. There is no delete button on these workflow items. If we execute these workflow items then they will be deleted automatically. I am looking for a solution by which I can delete (clean up) all the workflow items that are not executed from last year so that we can be ready for our compensation for this year.
Thanks,
Chakri.

3Gs erratically deletes calendar items when synching with iTunes

Serious problem. I sync to MacBook Air with iTunes. Process ends up "randomly" deleting appointments. Sometimes lose an entire month's items. How can I stop this from happening?

I know this doesn't help, but I have a similar problem. Most people want to know how to delete old calendar entries. I want to know how to stop my iPhone automatically deleting them (all except repeated events like birthdays) more than a couple of months old. My calendar is like a diary, I want to be able to check back when I had a meeting, a trip, lunch... and I have it on my computer, but why should iPhone delete stuff without instructions?

Deleting print jobs when finished

I use Adobe Acrobat 8 Standard, fully updated. When I create a pdf-file, the job of course is shown in the list of jobs for the "Adobe PDF"-printer. Upon completion, the job should be removed from the list - but it doesn't. I have no problems creating the pdf's - that goes like a charm. So its more a cosmetic problem than anything else.
I've tried deleting the PDF-printer, updating, reparing, un- and reinstalling - but nothing seems to help.
Any ideas ?
Thanks,
Lars

Hi,
From the Desktop, hold down the Windows key and press R. Into the Run window, type services.msc and hit enter. Browse down to the print spooler service, right click it and select Properties then click on the Stop button. Now browse to C:\Windows\System32\Spool\PRINTERS and delete the jobs inside this folder - You may need to click a prompt to gain the appropriate authority to open the PRINTERS folder.
Restart the computer and you should find the documents have been removed.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Restrict editing/deleting item when approval workflow is in progress

I have a list for contributors to submit documents and activate an approval workflow. The requirement is to restrict all users from editing and deleting the document once the workflow is activated. After the workflow is completed, if the document
is approved, all users also should not be able to edit/delete the item; if the document is rejected, users should regain the permission to edit/delete the item.
I had no problem with restricting edit/delete permission after the document is approved by adding a Declare Record action after the content approval status is set to approved in SPD.
However, the workflow was not able to complete when I added a Declare Record action in the "When the Task Process Starts" step and an Undeclare Record action in the very beginning of the "When the task process completes" step to restrict users from editing/deleting
the item when the workflow is in progress.
After I activated the workflow and approved the item, the Workflow status shows Approved but the Approval status still shows Pending. In addition, the "Approval Workflow Task is complete" (shown in the following image) is missing in the workflow history,
which seems to me that the workflow task is never completed.
Please advise me the proper way to restrict users from editing/deleting the document while the workflow is in progress. Thank you.

then use SPD to customize the task process to lock them out upon starting and give them rights again upon rejection.
http://office.microsoft.com/en-us/sharepoint-designer-help/use-the-task-process-editor-for-approval-workflows-HA101863538.aspx
Please mark my response as an answer if appropriate.
Learn.SharePoint.com
Hi
How was this resolved in the end. I to want to disable editing of document whilst workflow in progress. In SPD how is this achieved?
Thanks

Trying to delete bpm workflow items using SWWL

Hi All,
I'm trying to delete workflow items of a BPM that is stuck. I'm using SWWL for this.
However, I get the following error:
Work item 000000002255 locked by user WF-BATCH.
(enqueue error)
How do I delete this locked work item??
I'm suspect that this is causing all my other BPM's to get stuck waiting forever. These other BPM's were working correctly earlier.
Thanks!
Harsh

HI,
Try completing it manually from SWIA. also check for SM58 (enter WF-batch for user in selection screen) and complete the LUW manually.
alwo try SAP_WAPI_Workflow_resume or resume_workflow. pass the instance id of workflow (not workitem)
Regds,
Nilesh

SRM archiving: Deleted work items

Hi all,
Transaction code: SARA
Can somebody help, I've archived and deleted workflow items but now I need to be able get the agents names when reading the archived data which doesn't seem to be happening
In the forntend system the approval overview is obviosly empty because its been deleted. In the backend system I'm using program RSWWARCR to read the archived data but this only gives heading for the workflow, how do I get the agents?
Archive infostructure also gives just the last agent's username without any details on the action done by the agent. e.g
     ID         Task                     Last agent   CreateDate        Done On
78875     WS90000026     A72025       2004-11-23        2004-11-23
78876     WS10000049     A72025       2004-11-23        2004-11-23
78877     TS90100003      WF-BATCH 2004-11-23        2004-11-23
78878                             2                     004-11-23          2004-11-23
I'll really appreciate your help
Thanks and Regards

Hi Bennie,
Not sure, but have you tried whether report RSWWARCP gives the required fields?
If not, you could try to create a custom archive infostructure to include the fields which you want to read from archive. For this, you will have to create a custom field catalog to start with. You can refer note 994119 as an example for creating field catalogs.
Hope this helps,
Naveen

PURCHASE ORDER STATUS :When Deleting ALL ITEMS.

Hi experts,
I need to make purchase order status stay " Release Compleated " when deleting all items.
Anyone Know How to do it?
Or anyone Know how to use BAPI_PO_CHANGE in BAdI : ME_PROCESS_PO_CUST
In my project , I use Release Strategy of purchase orders, and there is a case of deleting all items.
In this situation, purchase order status returns to "Active " and release strategy tab disappears.
This is our problem.
I need to make purchase order status stay " Release Compleated " and prevent release strategy tab disappearing.
I tried to update the fields EREKZ(final invoice) and ELIKZ(delivery completed) in
BAdI : ME_PROCESS_PO_CUST Method : PROCESS_ITEM using BAPI_PO_CHANGE according to SAP Note 456691.
But BAPI_PO_CHANGE couldn't update EREKZ because of our customize , and I couldn't find how to use
BAPI_PO_CHANGE in the BAdI.
Anyone know solutions to solve this problem?
Thanks a lot.
Regards,
TKD

Hi,
please review the following information in SAP Note No. 456691 as
copied below:
18. Question:
When are the header conditions updated if a purchase order item is
deleted?
Answer:
If a purchase order item is deleted, the item is marked as 'statistical'
(field EKPO-STAPO = X) and the change is reflected in the header
conditions.
However, if for the item the final invoice indicator(EKPO-EREKZ) or the
inward delivery completed indicator (EKPO-ELIKZ) is set, the item is not
marked as 'statistical' (EKPO-STAPO is not set) and thus the header
conditions are not updated.
I hope this helps you
BR
Nadia Orlandi

Error message when trying to delete an item in a purchase order

Hi,
We are trying to delete an item in a PO, but when we select the item and click on the trash button (Delete), we get the following error message:
«Evaluated receipt settlement open, deletion not possible
Message no. ME867»
There was a good receipt that was originally done for this PO. We cancelled it with the opposite posting (debit GR/IR account and credit the project account using t-code MIGO.) The account assignment category of this PO is «Project».
Thanks for you help.
Julien

Hi,
This means ERS is active in your system.
What this means is that when you do a GRN, an ERS flag is activated in the PO header. The ERS is then settled using the PO data in SRM.
If you have not settled this (at least this is what is indicated from the message), then uncheck this flag in the PO header and then try and archive.
Cheers.

I want to delete a few contacts, apps, pics etc from my iphone, but when I delete and connect to my laptop they sync and come back again. How can I delete those items and not get them back when I connect my iphone to my laptop?

I want to delete a few contacts, apps, pics etc from my iphone, but when I delete and connect to my laptop they sync and come back again. How can I delete those items and not get them back when I connect my iphone to my laptop?
Also where exactly on the laptop is teh data stored.
Thank you!!

go to 'Edit' in the menu bar. Then choose 'Preferences'.
you'll see a pop-up and there's a tab called 'Devices' there. If you click that, you will be able to check a box that says 'prevent automatic syncing for iPods, iPads and iPhones' or something like that.
Hope this helps
NB: if you don't even see the menu bar that has options like 'File, Edit, View, etc', first click the black/white square button on the top left of your screen, and then click 'show menu bar'. It should pop right up.
Good luck

When I delete an item it dissapears, but does not show up in or go to Trash?

Hello,
When I delete an item it does not go to or show up in trash. I like to have the option of retrieving from Trash if needed and empty trash when I'm sure I don't need the file etc.
So when I choose to move something to Trash I get this message: "This item will be deleted immediately. You can’t undo this action."
Macbookpro 10.9.5
Note: Finder > Preferences > Advanced > Empty Trash Securely is Not ticked/ Not selected.
Can anyone help please?
I want to be able to send files etc to Trash and choose myself when I empty/delete Trash.
Thank you
Dp

dvp2012,
See the X Labs -> http://www.thexlab.com/faqs/trash.html#Anchor-Files-46919.
Good luck,
Clinton
MacBook Pro (15” Late 2011), OS X Yosemite 10.10, 16GB Crucial RAM, 960GB M500 Crucial SSD, 27” Apple Thunderbolt Display

Deleting all workflow items from SAP inbox

hi ,
I'm doing some Workflow testing and I've got a bunch of work items in my
Inbox. Is there a utility I can run that will just delete all of the work
items in my Inbox, regardless of the status?
any suggestions????
thanks in advance for your kind attention.
Ashish

So if I don't want a user to receive a particular Workflow message everyday, how can I cancel that? Can someone tell the transaction code and procedure to do this?
Thanks
> Ashish,
>
> In Dev & Test environments you can delete work items
> using txns SWWL or SWWL_TOPLEVEL (Menu Path: Tools ->
> Business Workflow -> Development -> Administration ->
> Workflow Runtime -> Reorganization). However it is
> not recommended to do this in Production. You cancel
> the Workflow in Production
>
> Cheers,
> Ramki Maley.
>
> Please reward points if the answer is helpful.
> For info on awarding points click on this link:
> https://www.sdn.sap.com/sdn/index.sdn?page=crp_help.ht

Getting Error when deleting line item of delivery

Hi,
I have cancelled the billing document and set the delivery pick quantity as zero for line item of a delivery and when i am trying to delete that particular line item of delivery, i am getting error message as 'Billing is already exist'. Please suggest how to delete the delete the delivery line item.

Hi Krish,
1) U can delete the SC at header level , only if it has not yet approved.
2)Once the SC is approved you can delete the SC at Item level under following conditions:
You cannot delete items that have already been approved and for which follow-on
documents already exist in the backend system, if:
A purchase requisition was created and the completed indicator is set for it,
or the quantity received for the purchase order is equal to or greater than the
quantity requested.
A reservation was created and the final issue indicator is set for it or the
quantity withdrawn equal to or greater than the quantity requested.
A purchase order was created and the delivery completed indicator is set for
it, or a goods receipt has already been entered.
You cannot delete service items that already exist in the backend system.
Hope this will help u.
Award points for suitable anwser !

Mass deletion/ transfer of workflow items - Urgent

Hi Experts,
We have a situation where there are around 1.2 million open workflow items in work flow of employee due to wrong assignment of workflow agents in PPOM. Now we need to clear all these workflow items from user's inbox either through deleting them or through un assignining them from his workflow.
It is not possible to process these workflow items individually from his inbox through transaction SBWP. I understand that we can delete maximum of 999 items at a time through transaction SWWL. This will not be of use for us.
Can some onpe please suggest how do we go about this issue.
Regards,
Santosh
Regards,
Santosh

Hello Santosh
SAP note 49545 will give you useful information.
Regards
Javier Reviriego

Workflow Items deletion

Hi,
Can anybody please let me know how to delete the Workflow items in ECC 6.0? What is the TC or any other process/ program?
Your help and time will be really appreciate.
Thanks & Regards,
Niki Shah.

Hi,
If by ABAP you have this FM SAP_WAPI_WORKITEM_DELETE
if want a tcode for that use tcode SWWL
Regards
Jaime

Delete workflow item when finished

Similar Messages

Maybe you are looking for