Deleting an object type

Hi,
I was wondering if someone could tell me how to delete an object
type such as:
Create type t1Obj as Object(
Col1 varchar2(2),
Col2 varchar2(3));
Thanks in advance.
Sincerely,
Nikhil Kulkarni

Hi,
DROP TYPE <typename> [FORCE]
use force, if you want to drop a type even if it has table
or other type dependents.
Regards
Elango.

Similar Messages

Delete Business Object Type (SWO1)

Hi gurus,
How can we delete/modify objects in SWO1 that were created in a previous version. Are these actions allowed, is there a workaround if its not allowed?
Thanks for your help!
Jason

Hi Raymond,
Thank you for your help.
I have come accross that thread in SDN while doing some research already. But It does not completely answer my question.
Correct me if I'm wrong, this means there is absolutely no workaround to modify a business object type that has been created in a different version? If thats the case why does SAP enforce this rule?
Thank you

Deletion of object list if header notification is of type M2

Hi,
I have a requirement where I need to delete the object list in a WO in IW32 only if the type of the header notification is M2. I have used BAPI_ALM_ORDER_MAINTAIN to do it, but this is not working. Is there any way I can remove the object list from the work order?

Hi,
I have a requirement where I need to delete the object list in a WO in IW32 only if the type of the header notification is M2. I have used BAPI_ALM_ORDER_MAINTAIN to do it, but this is not working. Is there any way I can remove the object list from the work order?

Error in FM DDIF_NAMETAB_GET when deleting BI objects via transport request

Dear all,
when importing a transport request in which several types of BI objects are deleted (Infocubes, DSO's, transformations, routines, DTP's, query elements, infosets, process chains). The import terminates only when transporting from acceptance to production with return code 12 due to an uncaught exception:
Transporting from development to acceptance did not raise this exception.
The ST22 dump (see below) refers in the "contents of system fields" section to a DSO, and to post-import activities. The DSO and the associated tables could not be found (rsa1 & se16), since they are deleted as desired.
Some of the relevant notes that I have found do refer to DSO related problems, but they all indicate to install SP19 which we already have installed (BW 7.0 Patch Level 23)
Could you please assist in pointing out potential solutions based on the information from the ST22 Runtime Error below?
Kind regards,
PJ
Runtime Errors UNCAUGHT_EXCEPTION
Except. CX_RS_PROGRAM_ERROR
Date and Time 08.02.2011 10:48:14
Short text
 An exception occurred that was not caught.
What happened?
 The exception 'CX_RS_PROGRAM_ERROR' was raised, but it was not caught anywhere
 along the call hierarchy.
 Since exceptions represent error situations and this error was not
 adequately responded to, the running ABAP program
 'CL_RSDD_DS====================CP' has to be
 terminated.
Error analysis
 An exception occurred which is explained in detail below.
 The exception, which is assigned to class 'CX_RS_PROGRAM_ERROR', was not caught
 and therefore caused a runtime error.
 The reason for the exception is:
 Error in BW: Error in DDIF_NAMETAB_GET
How to correct the error
 If the error occurs in a non-modified SAP program, you may be able to
 find an interim solution in an SAP Note.
 If you have access to SAP Notes, carry out a search with the following
 keywords:
 "UNCAUGHT_EXCEPTION" "CX_RS_PROGRAM_ERROR"
 "CL_RSDD_DS====================CP" or "CL_RSDD_DS====================CM001"
 "APPEND_DS_TEC_FIELDS"
System environment
 SAP-Release 700
 Application server... "dp1ci"
 Network address...... "<removed>"
 Operating system..... "HP-UX"
 Release.............. "B.11.23";
 Hardware type........ "ia64"
 Character length.... 16 Bits
 Pointer length....... 64 Bits
 Work process number.. 45
 Shortdump setting.... "full"
 Database server... "spisap02"
 Database type..... "ORACLE"
 Database name..... "DP1"
 Database user ID.. "SAPBIW"
 Terminal................. " "
 Char.set.... "C"
 SAP kernel....... 700
 created (date)... "Dec 14 2009 20:47:35"
 create on........ "HP-UX B.11.23 U ia64"
 Database version. "OCI_102 (10.2.0.1.0) "
 Patch level. 236
 Patch text.. " "
 Database............. "ORACLE 10.1.0.*.*, ORACLE 10.2.0.*.*, ORACLE 11.2.*.*.*"
 SAP database version. 700
 Operating system..... "HP-UX B.11";
 Memory consumption
 Roll.... 5979936
 EM...... 0
 Heap.... 1459888
 Page.... 40960
 MM Used. 6988880
 MM Free. 415648
User and Transaction
 Client.............. 000
 User................ "DDIC"
 Language key........ "E"
 Transaction......... " "
 Transactions ID..... "4D5111661004210BE10000000AFA2502"
 Program............. "CL_RSDD_DS====================CP"
 Screen.............. "SAPMSSY0 1000"
 Screen line......... 6
Information on where terminated
 Termination occurred in the ABAP program "CL_RSDD_DS====================CP" -
 in "APPEND_DS_TEC_FIELDS".
 The main program was "RDDEXECU ".
 In the source code you have the termination point in line 61
 of the (Include) program "CL_RSDD_DS====================CM001".
 The program "CL_RSDD_DS====================CP" was started as a background job.
 Job Name....... "RDDEXECL"
 Job Initiator.. "DDIC"
 Job Number..... 10475900
Source Code Extract
Line SourceCde
 31 RAISE EXCEPTION TYPE cx_rs_program_error
 32 EXPORTING
 33 text = 'Invalid DSO subtype'. "#EC NOTEXT
 34 ENDCASE.
 35
 36 * get table name from DDIC
 37 CALL METHOD cl_rsd_odso=>get_tablnm
 38 EXPORTING
 39 i_odsobject = n_infoprov
 40 i_tabt = l_tab
 41 IMPORTING
 42 e_tablnm = l_tablnm
 43 EXCEPTIONS
 44 OTHERS = 1.
 45
 46 IF sy-subrc <> 0.
 47 RAISE EXCEPTION TYPE cx_rs_program_error
 48 EXPORTING
 49 text = 'Error in CL_RSD_ODSO=>get_Tablnm'. "#EC NOTEXT
 50 ENDIF.
 51
 52 CALL FUNCTION 'DDIF_NAMETAB_GET'
 53 EXPORTING
 54 tabname = l_tablnm
 55 TABLES
 56 dfies_tab = l_t_comp
 57 EXCEPTIONS
 58 not_found = 1
 59 OTHERS = 2.
 60 IF sy-subrc <> 0.
>>>>> RAISE EXCEPTION TYPE cx_rs_program_error
 62 EXPORTING
 63 text = 'Error in DDIF_NAMETAB_GET'. "#EC NOTEXT
 64 ENDIF.
 65
 66
 67 ELSE.
 68 * model table only needed for standard datastore objects, for
 69 * write optimized DSOs target table is a changelog that is fully described by
 70 * dta_pro (infoobjects)
 71 CHECK n_s_dta-odsotype = rsdod_c_type-standard.
 72
 73 * get model table fields to add
 74 CALL METHOD cl_rsd_odso=>get_mod_tab
 75 IMPORTING
 76 e_mod_fld_ur = l_t_comp.
 77 ENDIF.
 78
 79 * according to T.B. ( 13.04.2007) the correct position is
 80 * not needed in the D version
Contents of system fields
Name Val.
SY-SUBRC 0
SY-INDEX 0
SY-TABIX 1
SY-DBCNT 1
SY-FDPOS 0
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY
SY-UCOMM
SY-TITLE Execute Post-Import Methods and XPRAs for Transport Request
SY-MSGTY E
SY-MSGID DA
SY-MSGNO 300
SY-MSGV1 /BIC/AV_AMOFCB40
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO 0
SY-DATUM 20110208
SY-UZEIT 104759
SY-XPROG SAPLSYST
SY-XFORM SYSTEM_HOOK_OPEN_DATASET

Hi All
We are also experiencing this same error when transporting deletions of multiple objects.
Although the transport was cancelled in the destination system (production) it appears to have largely deleted all objects successfully except for DSOs.
The DSOs still appear in the table RSDODSO (via SE11) but are not visible anywhere else. When you try to view the DSO via RSDODS a warning appears saying "DataStore object to be deleted by transport -> delete only allowed". If you try to delete them in this transaction the same ABAP runtime error as the transport appears.
Any assistance would be greatly appreciated!
Regards
David

Urgent--==creation of object type in MASSOBJ transaction

hi all:
Could any one urgently tell me how to create object type in Massobj transaction.(this is done to delete purchase requisition in bulk in transaction 'Mass' (AND not in 'MASSOBJ').)
i have created in Massobj transaction by pressing 'new enteries' button, but several elements are missing.
so it give short dump after running transaction Mass.
Object type is created in Massobj transaction and executed in Mass transaction.
could anyone find solution for this urgetly.
thanx in advance
regards
raj

Hi,
There is an standard object BUS2105 to for the mass maintanance purpose.
You can directly go to MASS transaction and give the object type BUS2105 at the intial selection screen and don't mention any variant name.Execute it and displays the next screeen whereas you have the option to select the field you want and execute it again.Go to the next screen and specify the PR number range and specify the new value for the mass maintanace.After that you got to select the push button 'Carry out a mass change'.
I hope this would help you.
Thank you.
Regards,
karun.M

Schema of a new Object Type: message pass the BIU without validation

Hi,
i've defined a new Object Type for send messages to Web Service. I've created the schema files and i've uploaded there in repository with the "Import" function of GUI. After, i've defined the XML file for the "Execute" function of the B1i GUI.
After the load of files, in the repository the files are in correct position.
In my BIU the definition of sender and receiver system type is correct, and also the definition of SenderMainObjectTypeID and ReceiverObjectTypeID. The message from B1 pass through the IPO chain without problems and the message is received by teh Web Service.
If modify the file XSL into the BIU, a message with less elements than a schema pass without problem.
If delete the schema from repository, the message pass without validation.
I would know because the schema is bypassed...
Thans

Ok,
solved with introduction of validation point in a customized IPO using a branch / unbranch atoms.
Bye.

Events in USER objects type not getting triggered in PFCG

Hi,
We need to send some notifications to the concern person at the time of assiging roles to the user . There is an object type USER and has events like created,cloned, deleted, roles_changed. But these events not getting triggered.
I need to trigger the workflow. How do we activate the events as the entry doesnot exits in SWE2 tooo . Is ther any other way?

HI munish
If the entry is not in swe2 Put the entry for the business object USER and use the receiver type as your workflow number.
Regards
vijay

No object type found for the corresponding message in BPM

Hi All,
I have a BPM scenario where i pick a file and based on a condition in the Switch i send the meesage to Mail or Proxy.
When i tested the scenario i got error as "no object type found for the message check the corresponding process activated" error in the call adapter step.
I checked in sxi_cache, IP is active with 0 as return code .
When checked in sxmb_moni_bpe, under process selection it says "No workitem exists"
In SXMB_MONI, under inbound i clicked PE but got error as "Unable to perform action fro the selected Message" is displayed.
Im new to BPM so please tell me as what Im missing exactly.
Thanks

Hi Sachi,
Delete the Integration Process from ID and reimport it. Also check the status of your BPM in T Code SXI_CACHE....if return code is not '0' then re-activate your integration process..
Try REPEAT ACTIVATION on SXI_CACHE...
Have a look into this..
Re: Stuck in BPM Transformation process Async to Sync Scenario
Regds,
Pinangshuk.

Getting "No Object type found error" in BPM sceanrio.

Hi Friends,
I am doing File to RFC with response sceanrio using BPM. For this i configured one receiver step, one send synchronous step to send input message to RFC and one asynchronous send step to send the response to a file.
I have configured 3 receiver determinations(file to bpm,bpm to ECC, bpm to file), 3 interface determinations(file to bpm, bpm to ecc, bpm to file) and 2 Receiver agreements(bpm to ecc and bpm to file).
I am getting the followin error:
No object type found for the message. Check that the corresponding process is activated
My sxi_cache has return code as ' 0 '. And as suggested in some threads, i deleted the objects and recreated them again. but still getting the same error.
Please help me in solving this issue.
Thanks & Regards,
Senthil.

Hi Senthil,
Is all the objects created in IR and ID are reflecting in SPROXY tcode.
Check SM59=> AI_JCO_Server connection is working or not ?
Check SXMB_IFR tcode is working fine or not ?
Check sm22 and let us know the dumps are there ?
Check default trace files for any errors in the following paths ?
1.usr/SAP/X7systemname/DVEBMGS07/J2EE//cluster/server0/log/defaulttrace.trc
2.usr/SAP/X7systemname/DVEBMGS07/J2EE//cluster/dispatcher/log/defaulttrace.trc
3.usr/SAP/X7systemname/DVEBMGS07/J2EE//cluster/dispatcher/logs/services/http/req_resp.trc
Thanks,
Jogula Ramesh

No object type found for this message

Hi all,
I have a file 2 file scenario which works fine.
I tried implementing BPM in the same scenario following the link:
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
The sender channel is working fine and the file gets deleted from the source folder.
But the output file is not getting generated.
The error msg displayed in SXMB_MONI is:
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No object type found for this message</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
What can be the possible problem.
Pls help
Thanks in advance
Regards,
Neetu

Hi,
>>Are you getting 2 entries in the SXMB_MONI for this File to File Scenario?
 No i am getting a sigle entry in which the sender service is the file system and the receiver service is the Integration Process.
>>Do you have 2 receiver determinations.
i.e 1) File to Integration Process
2) Integrtaion Process to File
 Yes i have the above 2 receiver determinations.
>>Also go to SXI_CACHE and check the Runtime version of your Integration PRocess.
 the runtime version of my integration process is 2.
I also tried activating my integration process in SXI_CACHE but the version remains 2.
What can i do next?
Pls guide
Regards
Neetu
There is one SAP note, but may not be related here.i.e 816778

SRM 7.0 Advanced Search Object Type

Dear All,
We use SRM 7.0, I want to remove some object types from Advanced Search options in Portal. For example, in standard advanced search, you can select shopping card, confirmation, purchase order, contract... etc. And i dont want some emplyees to see all purchase order or contracts.
How am i going to delete for example purchase order option from advanced search ?
Best regards,

Hi
Advanced search drop down menu is based on SPRO configuration
SRM server -- Cross application basic settings -- POWL and Adv search
Here Standard object types will be defined as SAP entries under define objects types for advanced search.
Also, default application will be assigned for each object types.
If you deleted any of these standard object types, then that object type will not be available in advanced search for any SRM roles. However, that is not advisable to deleted standard objects.
Alternatively, if you want restrict certain group of users to access the some object types, you can control through the configuration powl_queryR which is query visibility at role level.
You can control the the same at user level if you want through powl_queryU
Regards,
Krish

Report to delete OM objects

hello seniors
can anyone help me with report to delete OM objects?

*& Report Z_HRP1000_DELETE
REPORT Z_HRP1000_DELETE.
type-pools truxs.
DATA : it_raw TYPE truxs_t_text_data, "VARIABLES DECLARATION
 c_space(1) TYPE c VALUE ' '.
data : begin of it_1000 occurs 0,
 objid like hrp1000-objid,
 end of it_1000,
 wa_1000 like line of it_1000.
data : it_fail like it_1000 occurs 0 with header line.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_file LIKE rlgrap-filename OBLIGATORY.
parameters : p_otype like hrp1000-otype.
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
PERFORM get_file USING p_file. "CALLING F4 HELP FOR D=FILES
START-OF-SELECTION.
 PERFORM get_data. "UPLAODING DATA FROM EXCEL
if it_1000[] is not initial.
loop at it_1000 into wa_1000.
 delete from hrp1000 where otype = p_otype
 and objid = wa_1000-objid.
 if sy-subrc <> 0.
 it_fail-objid = wa_1000-objid.
 append it_fail.
 clear it_fail.
 endif.
 clear wa_1000.
endloop.
endif.
if it_fail[] is not initial.
loop at it_fail.
 write : it_fail-objid.
 clear it_fail.
endloop.
endif.
*& Form GET_FILE
 text
 -->P_P_FILE text
form GET_FILE using p_p_file.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
 CHANGING
 file_name = p_p_file
 EXCEPTIONS
 mask_too_long = 1
 OTHERS = 2.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
endform. " GET_FILE
*& Form GET_DATA
 text
--> p1 text
<-- p2 text
form GET_DATA .
*If no file upload path is mentioned
IF p_file = c_space.
 MESSAGE
 LEAVE LIST-PROCESSING.
ENDIF.
*Function module for uploading the file
 CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
 EXPORTING
 I_FIELD_SEPERATOR =
 i_line_header = 'X'
 i_tab_raw_data = it_raw
 i_filename = p_file
 TABLES
 i_tab_converted_data = it_1000
 EXCEPTIONS
 conversion_failed = 1
 OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 LEAVE LIST-PROCESSING.
ENDIF.
endform. " GET_DATA

FIM Synchronization Service - How to provsion a group to another object type

Hi,
i'm new to fim and use just the fim2010 synchronization engine with some rules extensions.
I have 2 ActiveDirectories and want to Provision a Group(used as Distribution list) from ActiveDirectory A as a contact object in ActiveDirectory B with the SMTP address of the Group as the targetaddress of the contact.
Can you give me a hint how to accomplish that?
Should i use the ShouldProjectToMV() Method in the rulesextension from the AD Connector of Domain A and out the Group as a Special mvtype? How do i join (what anchor to use) the Group to Domain B if i also sync normal contact objects as well?
Thanks you for your help!

If you want to decide that object is deleted you need to implement your de-provisioning logic.
De-provisioning logic should be implemented in Provision method as well. You need there something like:
if(I_dont_have_contact_for_group)
Provison_new_one
} else
if(do_I_Have_email_on_my_group_in_mv)
No -> delete_contact_in_other_forest
Depends on the target agent scope, if you have there other object types than contacts, you may want to implement Deprovision() method in agent extension to decide that contact should be deleted but other type of objects not.
Tomek Onyszko, memberOf Predica FIM Team (http://www.predica.pl), IdAM knowledge provider @ http://blog.predica.pl

ORA- 31684 Object type already exists while import

Hi All,
I wrongly imported a user schema "AP_PD@SRV01" to user "A_IT@SRV02" (Instead of "AP_IT@SRV02").
User AP_IT and Tablespaces are already exists and used remap option while import.
remap_schema=AP_PD:A_IT (instead of mapping to user AP_IT, I misspelled as A_IT)
remap_tablespace=AP_PD_DATA:AP_IT_DATA remap_tablespace=AP_PD_INDEX:AP_IT_INDEX
After successful import to "A_IT@SRV02", I deleted the user "A_IT"
SQL> DROP USER A_IT CASCADE;
I restarted the import to the correct user schema .. i.e AP_IT@SRV02
remap_schema=AP_PD:AP_IT remap_tablespace=AP_PD_DATA:AP_IT_DATA remap_tablespace=AP_PD_INDEX:AP_IT_INDEX
and import was completed with the following errors
Processing object type SCHEMA_EXPORT/USER
ORA-31684: Object type USER:"AP_IT" already exists
Processing object type SCHEMA_EXPORT/PACKAGE/PACKAGE_SPEC
ORA-31684: Object type PACKAGE:"AP_IT"."DBMS_NUMSYSTEM" already exists
Processing object type SCHEMA_EXPORT/PACKAGE/PACKAGE_BODY
ORA-31684: Object type PACKAGE_BODY:"AP_IT"."DBMS_NUMSYSTEM" already exists
Job "SYSTEM"."SYS_IMPORT_FULL_01" completed with 3 error(s) at 07:53:32
My questions ...
1.Can I assume that import was success as these objects were already exists.
2.Does this effect in anyway to the end users if I ignore this errors assuming import was successful.
3.If import is not a success then what should be my next step to import successfully.
Thanks.

Ven wrote:
Hi All,
I wrongly imported a user schema "AP_PD@SRV01" to user "A_IT@SRV02" (Instead of "AP_IT@SRV02").
User AP_IT and Tablespaces are already exists and used remap option while import.
remap_schema=AP_PD:A_IT (instead of mapping to user AP_IT, I misspelled as A_IT)
remap_tablespace=AP_PD_DATA:AP_IT_DATA remap_tablespace=AP_PD_INDEX:AP_IT_INDEX
After successful import to "A_IT@SRV02", I deleted the user "A_IT"
SQL> DROP USER A_IT CASCADE;
I restarted the import to the correct user schema .. i.e AP_IT@SRV02
remap_schema=AP_PD:AP_IT remap_tablespace=AP_PD_DATA:AP_IT_DATA remap_tablespace=AP_PD_INDEX:AP_IT_INDEX
and import was completed with the following errors
Processing object type SCHEMA_EXPORT/USER
ORA-31684: Object type USER:"AP_IT" already exists
Processing object type SCHEMA_EXPORT/PACKAGE/PACKAGE_SPEC
ORA-31684: Object type PACKAGE:"AP_IT"."DBMS_NUMSYSTEM" already exists
Processing object type SCHEMA_EXPORT/PACKAGE/PACKAGE_BODY
ORA-31684: Object type PACKAGE_BODY:"AP_IT"."DBMS_NUMSYSTEM" already exists
Job "SYSTEM"."SYS_IMPORT_FULL_01" completed with 3 error(s) at 07:53:32
My questions ...
1.Can I assume that import was success as these objects were already exists.
2.Does this effect in anyway to the end users if I ignore this errors assuming import was successful.
3.If import is not a success then what should be my next step to import successfully.
Thanks.You mentioned AP_IT schema and tablespaces already exist before doing first import itself.
Did you check the list of objects in AP_IT schema before performing import?
The following error is just an informational message and can be ignored:
ORA-31684: Object type USER:"AP_IT" already exists
But, the other 2 errors which says that package +"AP_IT"."DBMS_NUMSYSTEM" already exists+ means you have package in AP_IT schema and it wasn't replaced from the dump you imported. If you need the package from the dumpfile, you can drop the package and can import PACKAGE alone.
Hope this helps.
Regards,
Murali Mohan

How to delete proxy Objects/structure in R/3

Hi Experts,
In my scenario i generated ABAP proxy. I want to delete that proxy now. I am selected the particular proxy and i deleted. but here only service interface only deleting. not deleting all objects like message type and data type and proxy generated objects are not deleting.
While i am deleting it was allowing me to delete only root object. under root table structure and datatype/message type objects are not deleting. here even i deleted lock entrys also.
Here my question is how to delete all proxy objects. please give me your valuable suggestions.
thanks
Srini

refer this Problem in deleting Proxy Objects that talks about the same issue .

Deleting an object type

Similar Messages

Maybe you are looking for