Deleting Periodic Job

Hi All,
I have a periodic running job SWWDHEX which runs every 3 mins and this background job is getting cancelled.I want to delete this job permanently.i tried using "delete" option from SM37 and tried running the program RSBTCDEL but still the job keeps on running periodically.
Please Help..
Regards,
Priya

Hello Priya
Actually, this is workflow job which is running on every 3 minutes, you can delete the job who has status "release" in sm37->job overview screen.
The Program "RSBTCDEL" SAP_REORG_JOBS , you can also delete the job from there with providing the complete parameters with the selection of release flag.
Regards
Anwer Waseem

Similar Messages

How to delete periodic DB13 jobs

Dear All:
Our system environment is ECC 5.0 on SQL SERVER 2005, we had defined a periodic backup jobs with DB13, now we wanna delete those jobs , i found i can only delete it one by one, how can i delete those periodic jobs in one time,please give some advice, thanks a lot
Regards
Alex Cheng

you can truncate this table:
SDBAP
then, go into SM37 select:
job name DBA*
username *
dates 01011900 31129999
click on Execute
press F5
press Shift - F2

Delete admin jobs

Hello all,
We have been running LMS 4.1 for about a year now. In Admin --> Jobs --> Browser I have about 1877 jobs (Inventory Collection, Maintance_Jobs etc by owner admin) which I do not know how to delete.
Is there anyway to purge them????
Since these are periodical jobs, I assume that if I delete them I will have to recreate the jobs. But this is not the same as the jobs running by the system itself...
I feel like there is something I am missing...
Can anybody share their thoughts and experience?
Thank you in advance,
Katerina

Hi ,
To force Pugre the Jobs go to :
Admin > Network > Purge Settings > Config Job Purge Settings
Ok... so I delete the jobs in question from Admin --> Jobs --> Browser, and then I go to Admin --> Collection Settings --> Inventory --> Inventory System Job Schedule, where I set "weekly inventory collection" and "daily inventory polling" as before.
Yes , you can do the above.
IPM:reports:Hourly To Daily Consolidation
IPM:reports:Hourly To Daily Consolidation
IPM:reports:Daily To Weekly Consolidation
IPM:reports:Daily To Monthly Consolidation
IPM:reports:Purging
Above all jobs are IPM jobs , you must have created Collectors under IPM .similarly other jobs exist there , if you don't need them , you can just delete them..
Device_Support
SUMMARIZER_JOB
MAINTENANCE_JOB
ICServerPurgeJob
SystemPsirtJob
Thanks
Afroz

Delete Background JOB permanently.

Dear All,
How can i delete schedule background Job which is defined in SAP Systems,
when i check through sm37 i found that there is one job schedule on hourly period & showing status Cancel,.,
JOB Name is SAPOSCOL
also please find details of this Job,
Massage Text
JOB Started,
Login of User basis in Client 800 failed when starting a step.
How can i delete this job permanently.
Regards,
Jiitendra.

Hi,
The job is getting cancelled because the login BASIS with which the job is scheduled is failing to start it and this might because the ID is locked or password expired. Kindly check that to resolve the issue. But, if you want to delete the job then do it as said above by selecting the job with scheduled or released status.
Regards,
Sharath

Periodic Job Scheduling

Hi All,
I have scheduled two jobs periodically with same variant. The two jobs runs every day at same time. But two jobs are cancelling automatically. In job log the reason is Program is already active in background.
But in non periodic jobs, i mean i have two more jobs scheduled at same time with same variant. Those two jobs are not periodic jobs. In this case two jobs have been completed.
What would be the reason for cacel?
Thanks
Lakki

Hello Lakki,
look below this may help full for u..
use different Infopackages for different date selections, or else take example and proceed like below mentioned.
i think u will get idea.
Go to SM37 and enter your job name. In the checkboxes below, check 'Released' only and uncheck all others. In the date range give a future date in the 'To' date.
Once you get the list(there should only be one that is in released status), select that and delete(trash can in the application toolbar). That will remove it from future schedules.
Regards,
Lakshman.Annamaneni.

Job Scheduling in Solution Manager - Error creating Periodic Job

Hi all,
I am in the process of testing the Job Scheduling functionality using the Solution Manager. I have setup the criteria manager, ec. in the satellite system, and done the config in Solman as well.
I am able to successfully setup up a 'on-time' job.
it's only when I try to setup a periodic job, I end up getting following error
Any thoughts? Is there any piece of config that's missing? All the SICF services needed for this functionality are running fine.
Thanks for the help.
500 Internal Server Error
Error when processing your request
What has happened?
The URL https://fsspsm.target.com:/sap/bc/webdynpro/sap/wd_ags_ejr_job_req_gaf_app was not called due to an error.
Note
The following error text was processed in the system PSM : Message was not created
The error occurred on the application server fsspsmap01_PSM_00 and in the work process 1 .
The termination type was: ERROR_MESSAGE_STATE
The ABAP call stack was:
Function: BAPI_NOTIFICATION_CREATE of program SAPLDSWP_NOTIF
Method: MSG_SUBMIT of program CL_DSMOP_BSP_NOTI_MODEL=======CP
Method: SUBMIT_REQ_CRM_DATA of program CL_AGS_EJR_JOB_REQUEST_FACTORYCP
Method: SUBMIT of program CL_AGS_EJR_JOB_REQUEST_FACTORYCP
Method: PROCESS_SCENARIO_PERIODIC of program CL_AGS_EJR_JSM_PROC_STANDARD==CP
Method: PROCESS_JOB_SCENARIO of program CL_AGS_EJR_JSM_PROC_STANDARD==CP
Method: IF_AGS_EJR_JSM_PROC_FPM_CTRL~AFTER_PROCESS_EVENT of program CL_AGS_EJR_JSM_PROC_STANDARD==CP
Method: AFTER_PROCESS_EVENT of program /1BCWDY/K54G9RCMK7J4Z427H49S==CP
Method: IWCI_IF_FPM_APP_CONTROLLER~AFTER_PROCESS_EVENT of program /1BCWDY/K54G9RCMK7J4Z427H49S==CP
Method: CALL_UIBB_PROCESS_EVENT of program CL_FPM========================CP

Hello,
This is the basic Job Scheduling functionality and not the Redwood Job scheduling, correct?
Have you performed the IMG Activiteis in SPRO?
See the following Help link:
http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/c5/7edcbd58ce4e29bc1baf1c4761d71f/frameset.htm
Change a job
You can change the scheduling of a job as long as it has not been completed. Proceed as follows:
Make changes.
Note
When you change a periodic job, the system searches for the changeable successor and only changes this successor.
If there is more than one changeable job with the same name, the system does not change any of these jobs.
End of the note.
Save your entries.
To release the job in the target system, select Release.
You go to the transaction SM37 in the target system.
You just may want to ensure HTTP Services have been enabled. I realize you said the services workin SICF, but this needs to be verified as 500 Internal Server Error most often means the HTTP services are not activated.
Regards,
Paul

Problem in deleting backup job in Grid Control

Hi,
The topology and versions are as follows:
1 windows 2003 server with Oracle Grid Control 10.2.0.4.0.
1 windows 2003 server with Oracle Databases 10.2.0.3.
1 windows 2003 server with Oracle Databases 10.2.0.3 - Data Guard setup
I have tried to stop (and delete) some scheduled fullbackup jobs from Grid Control.
The job has now status SUSPEND. I have tried to stop and delete the job, but I get the message:
All executions of the job were stopped successfully. Currently running steps will not be stopped.
I cannot delete the job and the job is not running.
I have run this procedure in order to delete the job:
DECLARE
jguid RAW;
BEGIN
SELECT job_id
INTO jguid
FROM mgmt_job
WHERE job_name = '<name of your job>'
AND job_owner = '<owner of your job>';
mgmt_job_engine.stop_all_executions_with_id(jguid,TRUE);
COMMIT;
END;
With no effect. The job is still shown in Grid Control with status SUSPEND.
I have restarted all servers and all the components in Grid Control, but the jobs will not disappear from Grid Control although they have been deleted.
I am struggling with this for about 2 days now.
I have search in Metalink and the internet, but I have not found anything that provides a solution.
Any help will be very much appreciated.

hi,
I have in the past used the following from metalink
Do you have a metalink account?
SET verify OFF
SET linesize 255
SET pagesize 128
SET trimout ON
SET trimspool ON
SPOOL jobdump.log
ALTER SESSION SET nls_date_format='MON-DD-YYYY hh:mi:ss pm';
COLUMN status format a15
COLUMN job_name FORMAT a64
COLUMN job_type FORMAT a32
COLUMN job_owner FORMAT a32
COLUMN job_status format 99
COLUMN target_type format a64
COLUMN frequency_code format a20
COLUMN interval format 99999999
VARIABLE JOBID VARCHAR2(64);
PROMPT *********************** JOB INFO ********************************
REM Get the job id
SET serveroutput on
BEGIN
SELECT job_id INTO :JOBID
FROM MGMT_JOB
WHERE job_name='&&jobName'
AND job_owner='&&jobOwner'
AND nested=0;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
DBMS_OUTPUT.put_line('JOB NOT FOUND, TRYING NAME ONLY');
SELECT job_id INTO :JOBID
FROM MGMT_JOB
WHERE job_name='&&jobName'
AND nested=0
AND ROWNUM=1;
EXCEPTION
WHEN NO_DATA_FOUND THEN
DBMS_OUTPUT.put_line('JOB NOT FOUND');
END;
END;
SELECT job_name, job_owner, job_type, system_job, job_status, target_type
FROM MGMT_JOB
WHERE job_id=HEXTORAW(:JOBID);
PROMPT *********************** JOB SCHEDULE ****************************
SELECT DECODE(frequency_code,
1, 'Once',
2, 'Interval',
3, 'Daily',
4, 'Day of Week',
5, 'Day of Month',
6, 'Day of Year', frequency_code) "FREQUENCY_CODE",
start_time, end_time, execution_hours, execution_minutes,
interval, months, days, timezone_info, timezone_target_index,
timezone_offset, timezone_region
FROM MGMT_JOB_SCHEDULE s, MGMT_JOB j
WHERE s.schedule_id=j.schedule_id
AND j.job_id=HEXTORAW(:JOBID);
PROMPT ********************** PARAMETERS ********************************
SELECT parameter_name,
decode(parameter_type,
0, 'Scalar',
1, 'Vector',
2, 'Large', parameter_type) "PARAMETER_TYPE",
scalar_value, vector_value
FROM MGMT_JOB_PARAMETER
WHERE job_id=HEXTORAW(:JOBID)
AND execution_id=HEXTORAW('0000000000000000')
ORDER BY parameter_name;
PROMPT ********************** TARGETS ********************************
SELECT target_name, target_type
FROM MGMT_JOB_TARGET jt, MGMT_TARGETS t
WHERE job_id=HEXTORAW(:JOBID)
AND execution_id=HEXTORAW('0000000000000000')
AND jt.target_guid=t.target_guid
ORDER BY target_type, target_name;
PROMPT ********************** FLAT TARGETS ********************************
SELECT target_name, target_type
FROM MGMT_JOB_FLAT_TARGETS jft, MGMT_TARGETS t
WHERE job_id=HEXTORAW(:JOBID)
AND jft.target_guid=t.target_guid
ORDER BY target_type, target_name;
PROMPT ************************ EXECUTIONS *******************************
SELECT execution_id,
DECODE(status,
1, 'SCHEDULED',
2, 'RUNNING',
3, 'FAILED INIT',
4, 'FAILED',
5, 'SUCCEEDED',
6, 'SUSPENDED',
7, 'AGENT DOWN',
8, 'STOPPED',
9, 'SUSPENDED/LOCK',
10, 'SUSPENDED/EVENT',
11, 'SUSPENDED/BLACKOUT',
12, 'STOP PENDING',
13, 'SUSPEND PENDING',
14, 'INACTIVE',
15, 'QUEUED',
16, 'FAILED/RETRIED',
17, 'WAITING',
18, 'SKIPPED', status) "STATUS",
scheduled_time, start_time, end_time
FROM MGMT_JOB_EXEC_SUMMARY e
WHERE job_id=HEXTORAW(:JOBID)
ORDER BY scheduled_time;
UNDEFINE jobName
UNDEFINE jobOwner
UNDEFINE JOBID
SPOOL OFFAlan

How to delete a job in background programatically after 10 sec

Hi all,
Can anyone tell me how to delete a job in background programatically after the transaction is trigerred in 10 sec.
Yours help will be greatly appreciated
Yathish

Have a look at standard report RSBTCDEL. May be helpful to you.
Best Regards,
Vibha
*Please mark all the helpful answers

Problem in periodic job scheduling in LBWE

hi,
i have activated the Material movements datasource 2LIS_03_BF. Filled up the set up table.
now when i try to schedula a job in jobcontrol, under the tab *immediate* the immediate start check box is checked and disabled. the periodic job check boxat the bottom is unchecked and disabled.
the periodic values button which has to be near the check button is not present.
i even tried for other datasources, the periodic job is disabled in all and periodic values button is not found.
could anyone suggest me on this issue.

Hi,
Did you initialize delta for 2LIS_03_BF from BI? If not, first initialize the delta and try to schedule V3 job from LBWE.
By default *Immediate start * check box will be in disable mode. If you want to run it immediately just click on Save button.
If you want to schedule it for future date and time then click on Date/time button then enter schedule start date and time and click on Save button.For more details about scheduling options please look at following link.
http://help.sap.com/saphelp_nw04/helpdata/EN/c4/3a7fae505211d189550000e829fbbd/frameset.htm
hope it works...
regards,
Raju
Edited by: VaraPrasadraju Potturi on Aug 3, 2009 8:54 AM
Edited by: VaraPrasadraju Potturi on Aug 3, 2009 9:02 AM

How to delete Background job

hi all,
i am working on ECC6.0.
i am not able to find the path to delete background job completly.
can any body give me the navigation for the same in ECC6.0
Thanks in advance

hi
hopen ths wll help
To delete a background job explicitly, use:
BP_JOB_SELECT to obtain the jobname and job number of the job that you wish to delete.
You can select jobs according to all of the criteria available in the interactive background processing management system:
Jobname: Using a well-planned naming convention for your jobs will help you to select them precisely.
Job number
Name of the user who scheduled a job
Specifications for the start-time window/no start time scheduled
Start dependent upon predecessor jobs
Start dependent upon an event and event argument
Job status (preliminary, scheduled, ready, running, finished, aborted).
BP_JOB_DELETE to delete the job. The job log is deleted as well, if the job has already been run.
A job cannot delete itself. Also, a job that is currently running cannot be deleted. However, you can have it deleted automatically if it is completed successfully. See the DELANFREP parameter of JOB_OPEN.
Sample Program: Deleting a Background Job
Data declarations: BP_JOB_SELECT
DATA JSELECT LIKE BTCSELECT.
DATA SEL_JOBLIST LIKE TBTCJOB OCCURS 100 WITH HEADER LINE.
Sample selection criteria
JSELECT-JOBNAME = 'Name of job'.
JSELECT-USERNAME = SY-UNAME.
CALL FUNCTION 'BP_JOB_SELECT'
EXPORTING
JOBSELECT_DIALOG = BTC_NO
JOBSEL_PARAM_IN = JSELECT
IMPORTING
JOBSEL_PARAM_OUT = JSELECT
TABLES
JOBSELECT_JOBLIST = SEL_JOBLIST
EXCEPTIONS NO_JOBS_FOUND = 1
SELECTION_CANCELED = 2
OTHERS = 99.
In this example, the program loops over the internal table
SEL_JOBLIST and deletes each of the jobs that was selected.
Alternative: Have the user select the job to be deleted
with BP_JOBLIST_PROCESSOR. For an example, please see
Sample Program: Wait for Predecessor Job with JOB_CLOSE.
LOOP AT SEL_JOBLIST.
CALL FUNCTION 'BP_JOB_DELETE'
EXPORTING
FORCEDMODE = 'X'
JOBNAME = SEL_JOBLIST-JOBNAME
JOBCOUNT = SEL_JOBLIST-JOBCOUNT
EXCEPTIONS
OTHERS = 99.
ENDLOOP. *
FORCEDMODE deletes the job header even if other portions of the
job cannot be deleted from the TemSe facility, where they are
held.
FORCEDMODE can be used without fear of causing problems in the
System. Any TemSe problem that affects background jobs can be
resolved directly in the TemSe system and does not require the
job header.
regards
navjot
reward if helpfull

Cannot delete print job

One of my print job is on permanent "hold." The problem is I cannot delete it (neither from the toolbar nor menu), nor can I resume it. I just stays permanently at the top of the print queue. Even after restarting the computer, restarting the printer, it stays there. How can I delete it? Is there some terminal command or such that allows me to delete print jobs?
The printer is a HP J6480.
It's not a major issue, but irritating. I have set the printer icon to "auto quit," but it never quits due to the held job.

Hi a:
Take a look at this discussion and see if it helps you:
http://discussions.apple.com/thread.jspa?threadID=1511428
Barry

Auto TECO Orders for which finished date has been reached-Periodic Job

Dear PP GURUS N EXPERTS,
My company want to TECO all the production order automatically for which finished date has been reached or (Finish date is before current date).
On SDN, I have found that it can be carried our by scheduling the variant of PPIO_ENTRY or COHV. and it will be a periodic job.
I want to know that for this which parameters I have to select and where / how I mention that order finish date has been reached. Since it will be a periodic job.
Early response will be highly appreciated.
With thanks,
DSC

Dear DSC
You can use tranaction code CO44, define a variant for periodic job.
Important selection parameters :
Status selection profile : define which kind of production orders you want to set TECO indicator, for example with status CNF or DLV.
Basic finish date : define basic finish date, for example if you want to TECO the production orders whose basic finish date is less than or equal current date, when you create the variant, selection variable can be D ( D: Dynamic date calculation ), name of variable can be "current date"
Actions : please select the indicator "complete Technically".
You can have a try, please let me know the result.
Qiu

Issue in periodic jobs monitoring

Hi Guys ,
i have created a program for monitoring periodic jobs. out of list of some 120 predefined periodic jobs if the job is not released (Status S in table TBTCO) then send a warning mail with details of the jobs.
this program is set as a daily job. now problem is that when my program runs through job then it sends some jobs in mail though they r released...while manually checking in table TBTCO i found 92 jobs are in released status but if checking after 5 mins its showing 91 jobs in released status....can any one know why these periodic jobs status behaves randomely... is it like if periodic job is delayed then its status is not released...or do any one have any idea regarding this abnormal behavior???
Kind Regards,
Jacks M.

My Dear Experts,
It is my select query hitting at a particular job changing it's status for released to Ready/Active in which the difference might be in Micro/Nano Seconds this has caused the job monitor tool output showing the relevant job as Not Released... Thanks guys for being patient enough to a query which might be insufficient in getting ur minds work...
Kind Regards ,
jacks.

Delete the job

Hi,
When I am trying to delete a job in SM37, it says that we cant delete the job as it is not active, but the status of the job in SM7 is ACTIVE. I dont fnd any process running for this job in SM51/Sm66.
What could be the reason!
Thnx.

hi madhu...
check ur datas in data source,transfermation&dtp....whether it was activated&available or not....could u view the datas before....?
check these conditions....some times it's showing as it does not active in the job scheduler.....
regards ...

HOW TO DELETE SCHEDULED.JOBS

hi.
i have 4 simple questions.
1.how to view all procedures name
2.how to view all scheduled jobs name.
3.how to delete all scheduled jobs
4.how to delete sceduled job with with specific name.
thanks in advance
regards
sajid

Hi,
1.
SELECT *
FROM all_procedures;2.
SELECT * FROM ALL_SCHEDULER_JOBS;
SELECT * FROM ALL_SCHEDULER_PROGRAMS;3. (But I would not do this)
BEGIN
   FOR rec IN (SELECT job_name
                 FROM user_scheduler_jobs)
   LOOP
      dbms_scheduler.drop_job(rec.job_name);
   END LOOP;
END;4.
DBMS_SCHEDULER.DROP_JOB;In general, If you need some dictionary view, but not sure what's it called, query the dictionary itself, Example;
SELECT *
FROM DICTIONARY
WHERE table_name LIKE '%SCHEDU%';Regards
Peter
Regards
Peter

Deleting Periodic Job

Similar Messages

Maybe you are looking for