How to delete periodic DB13 jobs
Dear All:
Our system environment is ECC 5.0 on SQL SERVER 2005, we had defined a periodic backup jobs with DB13, now we wanna delete those jobs , i found i can only delete it one by one, how can i delete those periodic jobs in one time,please give some advice, thanks a lot
Regards
Alex Cheng
you can truncate this table:
SDBAP
then, go into SM37 select:
job name DBA*
username *
dates 01011900 31129999
click on Execute
press F5
press Shift - F2
Similar Messages
-
How to delete the Background job for Deleted user
Dear experts
The User RAMESH was delted before one month
I dont know what job had he Created and Scheduled
where should i find the perticular user backgroung jobs and how to delet it
regards
krishnaFrom SM37....you can give the user name and find all jobs scheduled by the user
select all jobs>>>>delete
*This should have admin access on jobs
Regards,
Nick Loy -
How to delete logistic delta jobs on R3 side?
Hello
I would like to delete delta jobs (stop system to release these jobs) on R3 side.
How I can do it?Hi
if you are deleting the delta , the Init in the BW side will also be deleted.
Follow the steps in case if you need to Delete the Setup tables and Fill it back
1. Delete data in DSO/Cube
2. Stop scheduled jobs for transfering data in R/3 side and BI check in SM37 and LBWE -> Job control
3. Delete setup tables using LBWG (based on the application component)
4. Delete delta initialization for your InfoPackage in BI by using RSA1 -> Scheduler -> "Delete Initialization Options for Source System"
5. Delete RFC queue with LBWQ
6. Check queues that there is no data with RSA7 and LBWQ
7. Run OLI*BW in background in your case restricitons if required
8. Start delta init InfoPackage in BI when job of initialization in R/3 is finished
Santosh -
How to delete process flow jobs
hi all,
need a piece of advice here. any idea how i can delete a process flow job scheduled using OEM without?? is there another way to do it without having Oracle Workflow Monitor? plz advice..
regards,
yklHi,
If you meant to delete all the Process Flows deployed into Work Flow schema without using OEM, then take a look at the scripts available in WF Schema under the directory - <your oracle home>/wf/admin/sql.
The scripts you will be interested in are wfrmitt.sql which prompts you for the Process Flow Package Type and removes all the relevant information from the Work Flow schema. There are other scripts as well. Please look into those.
Thanks
Mahesh -
How to schedule perioding BG job after job
My requirement is i need to schedule periodic job on daily basis, suppose i have 2 jobs A and B...then i need to start job B only and only if job A is finished..
Can you please guide me..You cannot specify a job as "periodic" if it is scheduled to start after a job. Refer [http://help.sap.com/saphelp_nw04/helpdata/en/20/2d513897110872e10000009b38f889/content.htm]
You can achieve in 2 ways:
1. Create a single job & define 2 steps.
2. Use SAP Event to trigger the second job. At the end of the first job raise an event which will trigger the first job.
BR,
Suhas -
Where is the printer queue stored - and how to delete all queue jobs?
I ran into a problem after I installed the Roll paper feeder on my Epson R1800. All of a sudden files will not print anymore.
One thing that may cause a problem is that there are two previous files (pdf I think) that someone else tried to print yesterday looking for a different printer on regular Letter size paper that are still in the queue because they did not print successfully. Everytime I tell Photoshop to print my photo on the Roll paper, those two old jobs pop back up on the printer queue gui and the system stops saying "wrong paper type for this job". Then I delete those two old jobs so there is only the Roll paper one left but it just sits there and wont print. When I launch the utility to check is all is kosher, sometimes it will give me the ink cartridge levels without a problem but sometimes it claims a communication error. I have re-checked the connection and everything and all is OK. When I launch the printer utility and tell it to print a Nozzle Check test, it prints it without a problem so there really is no prob with the communication.
When I restart the computer and the printer and try again, the two old jobs that I deleted in the previous step always reappear. So I wonder if, those two pdf jobs are kinda screwing with the system and should be deleted. But as i said, everytime I delete them, they look like they disappear from the list but my photo job just sits there on the queue without printing. The jobs are not stopped and there is no Hold on this one. If I quit and re-launch the print job, the old ones re-appear in the queue. So they must be stored someplace and are not deleting correctly. Does anyone know where this cue file is stored and what it is called? I have looked in Application Support and in Preferences but I can't see anything that looks like it.
I have downloaded the drivers from Epson for this printer again but that doesn't do anything either. I am using 10.4.11 on an 24 inch iMac intel 2.4Ghz. I only use the stock Apple utilities, no funky third party addon except for the Epson drivers. The printer utilities are:
Epson Printer Utility v3.01
Stylus R1800 utility v4.7(161.10)
Thank you for any help.
BoHooray, we found the problem! BOO, we already found the problem elsewhere!
Sooo, it seems we have some kind of Permission problem, have you Repaired Permissions ad rebooted?
At this point I think you should get Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, reboot holding down CMD+s, then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 5 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files!
Disconnect the USB cable from any UPS so the system doesn't shut down in the middle of the process.
Or we could maybe go back to that window, click on Printers, remove it? (Thinking perhaps the jobs will go away with the printer!?)
Or would you like to delve into the hidden folders/files to try to handle this? -
HOW TO DELETE SCHEDULED.JOBS
hi.
i have 4 simple questions.
1.how to view all procedures name
2.how to view all scheduled jobs name.
3.how to delete all scheduled jobs
4.how to delete sceduled job with with specific name.
thanks in advance
regards
sajidHi,
1.
SELECT *
FROM all_procedures;2.
SELECT * FROM ALL_SCHEDULER_JOBS;
SELECT * FROM ALL_SCHEDULER_PROGRAMS;3. (But I would not do this)
BEGIN
FOR rec IN (SELECT job_name
FROM user_scheduler_jobs)
LOOP
dbms_scheduler.drop_job(rec.job_name);
END LOOP;
END;4.
DBMS_SCHEDULER.DROP_JOB;In general, If you need some dictionary view, but not sure what's it called, query the dictionary itself, Example;
SELECT *
FROM DICTIONARY
WHERE table_name LIKE '%SCHEDU%';Regards
Peter
Regards
Peter -
How To Delete A Job That Just Won't Delete?
Sometimes when I go to print something it seems to "get stuck" and it says "pending" 2/1 and I can't cancel or delete it and until I can, I can't do anything else. I've had this issue with HPs in the past. How do I fix it and prevent it from happening again?
Dell Dimension 8400Windows XPHP PSC 1315I agree with Richard. It is RIDICULOUS to call this a solution. Duct tape on a leaking boat works better and lasts longer. First I send a 2 page print job to my HP Officejet Pro L7680 for immediate printing.That fails. After nothing comes out of the printer I investigate and see that it is "Printing" so I wait a little longer. It becomes obvious that it isn't coming out so I try restarting the job. Next I delete the print job. That fails. Next I run I run the troubleshooter. It finds that a print job is caught in the print queue and applies its fix. That didn't fix anything, so then I try to cancel all jobs in the queue with the same outcome, another failure. Then I try the "HP Solutions" recommendations: 1st duct tape >reboot your printer - spatially inconvienient, inconsiderate of other users, only works maybe 10-20% of the time. Ususally has to be repeated for each print job. How is this a solution? Mostly fails. 2nd duct tape >Reboot your computer -inconvienient to me and a time waster, applies after frustrated trial and failure listed above. Furthermore, that works only for a period of time and then the problem resurfaces, usually when I can't afford the delay. So it is only treating a temporary fix. It's similar to a doctor who only gives you pills to lessen your symptoms. The recommendation that I reboot my computer is not a solution. This has been going on for so long that I find it difficult to recommend HP printers anymore. What happened to the idea of reliability? When I send a job to the printer, it should print 99%-99.9% of the time.
-
How to delete a job in background programatically after 10 sec
Hi all,
Can anyone tell me how to delete a job in background programatically after the transaction is trigerred in 10 sec.
Yours help will be greatly appreciated
YathishHave a look at standard report RSBTCDEL. May be helpful to you.
Best Regards,
Vibha
*Please mark all the helpful answers -
How to clean /Delete all the jobs from Job monitor.
Hi,
we have done lot of testing in redwood. we have scheduled many jobs through redwood.we want to clean up the Job monitor now.we want to delete all the jobs from job monitor.
1)Is there any standard system give Job definition to do so?
2) how to delete jobs in waiting status?(next run is going to lock wait due to this waiting job status)
3)how to delete all the Operator messages?
Regards
RajeshHi,
Yes that was for individual job definitions but often if there are many jobs, most jobs come from only a few job definitions (SAP_AbapRun, SAP_CCMSJob, ...) so these options could help you already to delete most jobs.
You could also create a filter showing all Waiting jobs, then select all jobs, right-click and kill all these jobs.
Then a filter for all jobs in an end-state (Completed, Error, Killed, Canceled), select all jobs, right-click and delete them.
Regards,
Anton. -
How to periodic backup job for Hana Studio
Dear Hana Gurus,
I want to make periodic backup job in Hana Studio, how can i do that ? I can backup in Hana studio easly, but i couldnt find job backup
Best RegardsAnd clearly you couldn't find the search functionality here in SCN.
This question had been asked, discussed and answered often enough.
It's even documented.
Please: do your homework - due diligence.
Thanks for following The SCN Rules of Engagement. -
How to delete the SAP HR jobs in bulk
Hi,
I have created the jobs but now I want to delete them.
Please let me know the following:
How to delete the SAP HR jobs in bulk?
Is there any programs/tcode to delete the jobs in bulk apart from LSMW?
Thanks & Regards
ManishHi Manish,
Please use report RHRHDL00.
Regards,
Dilek -
I need to know how to delete print jobs I don't want to
I have multiple print jobs that I no longer need to finish and I don't know how to delete them because when I cut it off it picks right back up where I left off and costing me too much paper
Hi,
I think you need to remove the queue. For Windows, please try:
hold down the Windows key and press R.
from the Run window, type services.msc and hit enter.
if the machine asks for Admin you have to accept this,
look down to the print spooler service, right click it and select properties
click on the Stop button,
browse to C:\Windows\System32\Spool\printers
delete the job inside this folder
reboot the machine
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Hi All,
I have a periodic running job SWWDHEX which runs every 3 mins and this background job is getting cancelled.I want to delete this job permanently.i tried using "delete" option from SM37 and tried running the program RSBTCDEL but still the job keeps on running periodically.
Please Help..
Regards,
PriyaHello Priya
Actually, this is workflow job which is running on every 3 minutes, you can delete the job who has status "release" in sm37->job overview screen.
The Program "RSBTCDEL" SAP_REORG_JOBS , you can also delete the job from there with providing the complete parameters with the selection of release flag.
Regards
Anwer Waseem -
hi all,
i am working on ECC6.0.
i am not able to find the path to delete background job completly.
can any body give me the navigation for the same in ECC6.0
Thanks in advancehi
hopen ths wll help
To delete a background job explicitly, use:
BP_JOB_SELECT to obtain the jobname and job number of the job that you wish to delete.
You can select jobs according to all of the criteria available in the interactive background processing management system:
Jobname: Using a well-planned naming convention for your jobs will help you to select them precisely.
Job number
Name of the user who scheduled a job
Specifications for the start-time window/no start time scheduled
Start dependent upon predecessor jobs
Start dependent upon an event and event argument
Job status (preliminary, scheduled, ready, running, finished, aborted).
BP_JOB_DELETE to delete the job. The job log is deleted as well, if the job has already been run.
A job cannot delete itself. Also, a job that is currently running cannot be deleted. However, you can have it deleted automatically if it is completed successfully. See the DELANFREP parameter of JOB_OPEN.
Sample Program: Deleting a Background Job
Data declarations: BP_JOB_SELECT
DATA JSELECT LIKE BTCSELECT.
DATA SEL_JOBLIST LIKE TBTCJOB OCCURS 100 WITH HEADER LINE.
Sample selection criteria
JSELECT-JOBNAME = 'Name of job'.
JSELECT-USERNAME = SY-UNAME.
CALL FUNCTION 'BP_JOB_SELECT'
EXPORTING
JOBSELECT_DIALOG = BTC_NO
JOBSEL_PARAM_IN = JSELECT
IMPORTING
JOBSEL_PARAM_OUT = JSELECT
TABLES
JOBSELECT_JOBLIST = SEL_JOBLIST
EXCEPTIONS NO_JOBS_FOUND = 1
SELECTION_CANCELED = 2
OTHERS = 99.
In this example, the program loops over the internal table
SEL_JOBLIST and deletes each of the jobs that was selected.
Alternative: Have the user select the job to be deleted
with BP_JOBLIST_PROCESSOR. For an example, please see
Sample Program: Wait for Predecessor Job with JOB_CLOSE.
LOOP AT SEL_JOBLIST.
CALL FUNCTION 'BP_JOB_DELETE'
EXPORTING
FORCEDMODE = 'X'
JOBNAME = SEL_JOBLIST-JOBNAME
JOBCOUNT = SEL_JOBLIST-JOBCOUNT
EXCEPTIONS
OTHERS = 99.
ENDLOOP. *
FORCEDMODE deletes the job header even if other portions of the
job cannot be deleted from the TemSe facility, where they are
held.
FORCEDMODE can be used without fear of causing problems in the
System. Any TemSe problem that affects background jobs can be
resolved directly in the TemSe system and does not require the
job header.
regards
navjot
reward if helpfull
Maybe you are looking for
-
Payment of Expenses through Vendors and SAP Payroll possible?
Hi, A possible client is thinking of implementing SAP travel and Expenses. Depending on certain expense types they want to pay expenses through sap payroll; other expenses they want to be able to pay out via vendors. Is this possible? I know it's pos
-
Adobe Acrobat XI Standard for Windows upgrade to Adobe Acrobat XI Pro for OS X
I have changed the platforms, from win to mac, and Adobe Acrobat is required for my work. I own Adobe Acrobat XI Standard for Windows and I was interested if I could change the platform to OS X, but unfortuantelly XI Standard is not available for mac
-
How to make Lion Server serve NTP
Is there a simple way to turn on NTP serving in Lion Server? In 10.4 it was just a check box, now it's invisible. Command line only now?
-
Issue with renaming the package name from "Oracle" to "oracle" in windows
Hi all, I created a project in which initially I created all the jsffs in a package Oracle/communications. In one of the jsff pages(a.jsff) I have include tag <jsp:directive.include file="/*Oracle*/communications/b.jsff"/> But later I refactored the
-
Printing CD jewel cases prints all black
Can you help me with that problem?? I am running iTunes version 10.3.2... the album covers on the CD Jewel Case are still printing that HUGE, SOLID BLACK SQUARE. I too have reported it to Apple iTunes support team several times .. no response rec