Deletion of (simulative) dependent requirements.

Hello,
I am trying to findout a BAPI (or function module) for the deletion of dependent requirements and also for simulative dependent requirements. Do you know if exists any?
Or maybe can you tell me if I can simply delete (by DELETE statement) entries from tables RESB (depend.reqts) and MDSM (simul.depend.rqts), without having a risk of inconsistencies in the databases?
Thanks in advance for your advice.
Regards,
Rudy

Finally, I found on another post that it is not possible to change/delete dependent requirements (or simulative requirements) by a normal transaction or a normal BAPI.
The dependent requirements do correspond to planned order and that's it...
So, if I want to get rid of some old dependent requirements, I have to get rid of their originating planned orders.
The same has to be applied for simulative requirements and simulative planned orders.
The BAPI I will use for planned order deletion is: BAPI_PLANNEDORDER_DELETE.
It works for normal planned orders and simulative ones too.
Thanks anyway for your help.
Regards,
Rudy

Similar Messages

Copying Simulative Dependent Requirement

Is anybody knows how to copy simulative dependent requirement of LTP to Operative Planning.
I found a T-Code : MS66 , but it looks like not working !
Is anybody can give me some help , it is urgent , thanks

Hi Prasobh and Tajuddin ,
Many thanks for your kind helping , but i am still some confusion.
My scenario for example :
I have Finsh Goods: I001 and the BOM is I00A + I00B
1.I have forecast for I001 , let's say 100KG
2.I transfer SOP to Demand Management , use T-code:MC88
3.Run MS02 for I001 then use MS04 to check result . LTP generate PlOrd for I001
4.I go to MS04 check result for material I00A and I00B , LTP generate simreq for both.
5.Now i want to transfer the simreq of I00A and I00B to Operative Planning(MD04) use MS66
I am not sure is that logical ? i meet problem on step 5 , that's means when i go to MD04 to check material I00A and I00B , the simreq not display in the list.
Thanks again for your kind help !

Copy of Stimulated dependent requirement by MS66 in LTP

Hi,
What are steps of copying stimulated dependent requirements by using MS66. When I am putting the planning scenarion and target version and execute , nothing is getting copied.
Can anybody explain the steps I m missing here?
Regards
Deepak Sharma

Dear,
You can use MS64 to copy the source (simulative) version to a target (active ) version.
MS66 - it will copy the simulative dependent requirement to the PIR
Check whether your planning is active ot in test mode. If it is in test mode then activate this and give the target version.
Then run the MRP from MS02 and firmed the planned orders and try from MS66 to transfer this avtive planning MD04.
Or The alternate what go to MD61 for Raw material with the required "Requirment type".
In the table tab select the line item, use the menu: Edit->Copy requirements->Simulative dependent reqm.
Now you should get a popup screen, Populate the "Planning Scenario" referance and then click the tick mark. Now you simulative dependent requirement gets copied to "Demand Management". Donot forget to activate the "active" check box.
Regards,
R.Brahmankar

Dependent requirements deletion

Hello everybody,
Do you know if there is a way to delete (old) dependent requirements (table RESB)?
Because, as the number range has recently reached its top limit, we encounter now some problem of "duplicate entry" with the MRP Run...
Thanks in advance for your help.
Regards,
Rudy

Hi Rudy,
As you properly wrote dependent requirements come from planned order, from higher level; the planned order is the source of them.
If you want to get rid of the dependent requirement, you have to eliminate the source (you cannot modify the DepReq directly). If the DepReq is old, the PldOrd should be also old...
(This is very similar to PrdOrd and OrdRes: OrdRes comes from PrdOrd and you cannot modify OrdRes manually; if you close the PrdOrd, OrdRes "disappears" automatically)
Maybe your problem is that the planned order does not exist and still SAP displays the DepReq and calculates with it. In this case you should search for suitable OSS note and if no result you can contact the softwer producer...
Regards,
Csaba

Mass deletion of dependent requirement

hi
Can we delete the independent requirement in mass.
Regards,
Anand

Dear,
To delete the dependent requirement you need to close the parent order i.e. the status of the order should be TECO. You can TECO the order in COHV transaction...selecet all the orders and selcet the mass processing for TECO.
Or
If you want to do it for a specific component
See that the dependent requirement material i.e. the component. goto the component detailed view, here you find one check box called final issue check box, Please activate this. Then the requirement from this order will be deleted.
please come back if required

How to delete dependent requirement

I need to delete dependent requirement but when tried to delete it by using change mode in MD04, I got message that planned order 0000**** does not exists.

Hi,
In MD04 screen, using material number and the plant you can view all the planned orders. From MD04 screen, u can celect the planned order by change mode and you can delete the planned order.
Regards,
V. Suresh

Deleting a Simulation version from APO

Hi Experts,
We are planning to delete a Simulation Version from our APO system. Till now, we had jobs to copy Active Version to Simulation version. So, at present, the siluation version has all the data which the active version has- which basically means that there is a lot of data that has to be deleted, before we can delete the simulation version.
Is there a best practice around 'Deletion of Sim Version'? If not, on the basis of your experience, can you please suggest how to go about it?
Your inputs are highly appreciated.
Thanks,
Kunal

Hi Kunal,
Simulation versions are used in many business processes and depending upon your business requirements can be manipulated daily, weekly, monthly, etc.
You can delete a simulation version manually in /SAPAPO/MVM, with transaction /SAPAPO/VERDELLD or program /SAPAPO/VERSION_DELETE_LC_DB.
I don't think you have to delete any transactional data. Just don't use it on version 000.
Best Regards,
Mike

Delete Condition Type Depending on Item category Va01

HI all,
I wan to delete condition record depending on item category. I have a good link from sap.This link explains how to hide the condition but i want the delete the condition. was badly struck here.
http://wiki.sdn.sap.com/wiki/display/ABAP/ManipulatingPricingconditionsdisplayinSalesdocumentwithUserExit-LV69AFZZ
Regards,
madhu
Edited by: madhurao123 on Mar 24, 2011 2:19 PM

Hi,
We had a similar requirement once, and towards the end we realised that deleteing rather than hiding it was a bad idea.
Think beyond the scope, that if a future sales order created with reference needs this condition record; manual entry will again be dependent on your pricing procedure and is a mess.
But if you do want to delete it; go into debugging and decide which user exit you would want to use and delete that line of the condition record from XKOMV table for that Sales Order

Dependant requirements

Hi Gurus,
One quick question about BOM not generating dependent requirements. e.g If I have a BOM1 and Components of BOM1 are P1 and P2. and If P1 is a BOM as well components are P3 and P4.
If I create a Planned Independent requirement for BOM1, MRP should create 2 Planned order 1 for BOM1 and 2 for P1 (both materials are In-house, Strategy Group is 40. I am NOT seeing 2 planned order I only see Planned order for BOM1. kindly help is there something wrong which I am doing. Thanks

Shani,
To recap, it sounds like you have two BOM structures:
BOM1 > P1, P2
P1 > P3, P4
You create a PIR for BOM1. You run MRP. MRP creates a planned order for BOM1, and no other planned orders are created.
I will assume you did not use MD03 when you ran MRP. I will assume that your MRP types (all 5 parts) are not a consumption type such as V, but a demand type such as P or M*.
a. Look at MD04 against P1 and P2. Do you see dependent requirements from the planned order for BOM1? Do these dependent requirements reduce the available quantity of P1 to 'less than zero'?
b. Manually create a planned order for P1. Any errors/warnings?
If the answers to 'a' are yes, and the answer to 'b' is no, then you probably have a planning file problem. Create a planning file entry for all 5 parts. MD20. Delete your planned orders and try again.
Best Regards,
DB49

Mass deletion of previous demand/requirements

Hi,
We have migrated from Discrete to repetitive.
But there were some dependent requirements and Production orders open.
Every time i run mrp i get planned orders for these requirements.
I have checked the demand in MD62 but i could not find any demand in those dates.
How to delete these requirements in mass or at table level.
I have been through some links and found that it can be deleted at table level using MDPB table if yes can you tell me how to use it.
Thanx in advance.
Sandeep

Try running MRP by setting up a background job during off-peak hours with the following parameters...
Processing key            NEUPL   Regenerative planning
Create purchase req.      2       Purchase requisitions in opening period
Schedule lines            3       Schedule lines
Create MRP list           1       MRP list
Planning mode             3       Delete and recreate planning data
Scheduling                2       Lead time scheduling and capacity planni

No dependent requirements generated

what are the possible reasons why a planned orders isnt generating dependent requirements for its raw material?

Dear Bear,
a) first of all check if header and all child parts are mrp relevant(ie it shudnt be 'ND' type planning)
b) If u r getting planned orders for some and none for others ,Pls check MRP type(see if the planning time fence) is activated,and its period.
c)Check if stocks exists for the components
d)See if the BOM is valid for the BOM explosion date,Also check for BOM selection method in MRP4 view,
e)In the MRP parameters(MROP RUN) for PLANNING mode is 1-active planning mode and not delete planning dates or eexplode BOM
f) SPRO ,t code:OMPG --ensure that the epriod for which u are exepcting the trequirements donot fall within the adjustment period.MAKE adjustment period as '0' and try.
Hope it will help u.PLS update on this
THNX
HKR

NPROC:Dependent requirement not getting generated

Hi Experts,
We have an issue wherein we have Depedent requirement for a HALB material against FERT material requirement.But, the MD04 screen of HALB material doesn't show any Dependent requirement.
Infact, the MD04 screen of the FERT material shows NROC in the MRP element data for the given period.
NROC: It means that there are some errorneous components which were created by doing GR before a GI.
I had tried executing MF47 transaction(which is COGI equivalanet in REM scenario) for clearing the errorneous components.But, i got the error as "Deficit of BA Unrestricted use". So,it means that it shall use my current stock for post processing the error componenets, which ideally shouldn't been the case as the stock was already consumed.
Then, i found out that the BOM of FERT was not maintained.
So,just wanna know that coz BOM of FERT is not maintained & the HALB needs to be defined as a component in the BOM of FERT in this case?
or any other solution is there so that Depedent requirement for the HALB material reflects in MD04 screen.
What we want: The recurring NPROC requirement which is coming for the year 2009, 2010 should permanently vanish from MD04 screen.
Thanks,
Rishi
Edited by: Rishi. N. Khanduri on Jan 28, 2010 3:08 PM

Harendra,
Are you using "NETPL" as processing key for MD02? After 3 or 4 days is the dependent requirment getting created automatically or is it after MRP run again?
Please provide more details,
Regards,
Prasobh

Dependent Requirements Planning

Hey Gurus,
I have a situation in which I have two materials that are planned with Independent requirements but also have dependent requirements against them. these two materials are 6001116 and 6001771. I have set the MIXED MRP indicator to "1", planning strategy "40" and MRP Dep. requirements as "1".
6001116 is not planning the dependent requirements and is only being planned by the independent requirements. 6001771 is planing both the dependent requiremnets and the independent requirements even though I have set the MRP Dep. requirements to "1". The only difference between these two materials is that 6001116, is a made in house product and the 6001771 is a purchased product.
I can't think if anything else that would control this to put me in this situation. Do you guys have any ideas for me or things that I should check to make sure that this is working correctly? I thought it was only the Dep requirements indicator that controlled the planning of independent reqs.

Dear,
You donot want dependent requirements
to be created" for your components when MRP is run
There are three Options:
First Option:
For the all respective components in MRP 4 view Input "1" for MRP Dep.Reqts
Second Option:
In the Basic Data 1 view maintain the X-Plant Matl Status maintain "01"(Blocked for Procurement/Whse)
Third option,
You can set the MRP type in material master as 'ND' (not planned) (MM02 > MRP1)
Then Planned orders/Purchase requistions will not be created for the components
Regards,
R.Brahmankar

Planning of Dependent Requirements for BOM Components in Make to Order scen

Hi Friends - I want to execute a full cycle Make to Stock Scenario with Materials planning using MRP.
The scenario will include BOM Components with Routing.
The process flow I want to execute -
1. Create a Sales Order for a Finished Product (Product should have a BOM for Production)
2. Do the product Materials Planning for the Sales Order through MD50
3. Get all the dependent material requirements (both for products as Planned Order and also for BOM Components - all the BOM components should also be planned)
4. Convert Planned Order for Product to Production Order
5. Convert Planned Orders for BOM components to Purchase Requisition
6. Confirm Production Order
To execute this I have done the following
1. I have created a Material Master data for Finished Product (FERT).
2. I have assigned Item Category Group - NORM, and General Item Category group as NORM
3. I have assigned MRP Type PD in MRP 1 View and Strategy Group 20 (Make to Order Production) in MRP 3 View.
4. Now created a Universal (Type 3) BOM for the product with one material component.
5. Now also created a Routing for the Material with two operations having PP01 a control key.
6. Now created a standard sales order for the product.
7. Executed the MD50 for the Sales Order Item.
Now where do I find the BOM components for this material in the Sales Order?
After executing the planning Run MD50 I am only getting the requirements for Product only. I can't see any dependent requirements for the BOM components.
How do I make sure that the BOM components are also planned while the product is planned?
I have checked the component Stock Requirement List - there are no requirements generated from the Sales Order Product BOM.
Pls help me on this. How to do this so that the raw material components are also planned?
Thanks
Purnendu

Hi Dhaval, Sandeep, Ashok - Thanks a lot for your replies.
I have checked the Planned Order Created through Planning Run.
If I click on the Components Tab I am getting following message
No material components were determined
Message no. 61027
Diagnosis
Until now, no BOM explosion has been carried out or no BOM has been created for this material yet.
Procedure
Either explode the bill of material for this material, or
create the components manually by processing the planned order in change mode.
If I try to explode the BOM through Header Menu - Edit> Explode BOM
I am getting the same message.
If I click on the Bill of Material Tab - I am getting the same above messge.
Ashok - I have tried both the Selection Method -
Nil - Selection by Order Quant.
1 - Selection by Explosion Date
But with no effect.
Waiting for your advice.
Thanks and warm regards
Purnendu

Deletion of Object Dependency in BOM

Hi All,
I am trying to delete the Object dependency from a BOM using the Function Module "CUKD_API_ALLOCATIONS_MAINTAIN". After executing it, the Object is getting deleted but the Bulb like symbol for Obj(Object Dependency) in Transaction CEWB is not disabling. Please help me in this.
Thanks
Vinay

Solved

Deletion of (simulative) dependent requirements.

Similar Messages

Maybe you are looking for