Delivery Customizing copy to client 100
Hello,
I have included a add-on SCEMSRV 700 with SP 06 to my Ehp4 ERP system in client 000. As post installation step mentioned in S.note:1173567,Delivery Customizing is imported into client 000 and may have to be copied to other clients. For more information, see Note 337623.
I checked Note 337623 still could not make out what needs to be done for copying this changes in client 000 to client 100(our cutomizing client). We have client 200 and 210 too in this DEV system. Request for valuable suggestion on my next action.Thanks in advance.
Hello,
After you've installed SEM add-on in client 000 - it is available 'cross-client' in your system.
E.g.:
You have 3 standard clients (000, 001, 066) and client 100 (a copy from 000). You install add-on (any) it's standard delivery is immediately available in your system. The only thing you'd probably do (concerning BW) is maintain 'client' value in table RSADMINA:
ta 'SE16' --> table 'RSADMINA' --> field 'BWMANDT' (Unique client in BW).
BR
P.S.
Check SAP Note [522569 - BW: Working in several clients (especially APO 4.x/SCM 4.x)|https://service.sap.com/sap/support/notes/522569]
Similar Messages
-
How to delivery customizing to other client after installing SEM 6.0
After i installed add-on component SEM 6.0 in client 000, i need to copy the delivery customizing to other existing client (for example 100). Although i have checked note 337623, I still don't understand exactly what should i do?
Any advise or any guide documents?
Thank you .Hello,
After you've installed SEM add-on in client 000 - it is available 'cross-client' in your system.
E.g.:
You have 3 standard clients (000, 001, 066) and client 100 (a copy from 000). You install add-on (any) it's standard delivery is immediately available in your system. The only thing you'd probably do (concerning BW) is maintain 'client' value in table RSADMINA:
ta 'SE16' --> table 'RSADMINA' --> field 'BWMANDT' (Unique client in BW).
BR
P.S.
Check SAP Note [522569 - BW: Working in several clients (especially APO 4.x/SCM 4.x)|https://service.sap.com/sap/support/notes/522569] -
Hello Apple I work in one of the shops phones in the Kingdom western Saudi Arabia you now restore a backup to the customer by mistake recovered to copy another client now been linked to the phone and ask me to check, I do not know PIN number
<Edited by Host>These are user forums. You are not speaking to Apple here. I'm sorry but we cannot assist you. Contact your Apple vendor in your country. Customer Service: Contacting Apple for support and service - this includes international calling numbers.
-
RSTCO_ADMIN - "No logical system exists for client 100"
Hi all.
I am trying to run RSTCO_ADMIN in a BI 7.0 SP11 system. The activation stops / fails, and in the log I get a warning message saying:
"No logical system exists for client 100".
In SALE and SCC4 I have created a logical system TBQCLNT100 and assigned it to client 100. Client 100 was created with a client copy from client 000.
Does anyone know what I have to do to fix this?
Thanks!
Best Regards,
ThomasThomas
Check if you have configured the RSADMINA table, here you will see a "bw client" filed, put 100 as your bi client.
Regards -
Server0 will not start. client 100 does not exist.
On my NetWeaver 7.0 system with Solution Mgr 7.0 (build from IDES 600 image) on a HPUX 11.23 IA & Oracle with Java 1.4.2.15 installed, I'm going thru the basic setup steps for configuring MOPZ and get to the step
Following IMG basic install steps (basic settings->SAP Solution Manager System->System Landscape(SLD)->Specify service for comm. w/ SLD in Visual Admin), unable to connect to J2EE engine via Visual Admin.
The dev_server0 log:
[Thr 6] JLaunchIExitJava: exit hook is called (rc = -11113)
[Thr 6] **********************************************************************
ERROR => The Java VM terminated with a non-zero exit code.
Please see SAP Note 943602 , section 'J2EE Engine exit codes'
for additional information and trouble shooting.
Std_server0.out log:
===========================================================
Apr 27, 2009 8:14:20 AM ...re.server.ume.service.UMEServiceFrame [SAPEngine_System_Thread[impl:5]_73] Fatal:
service com.sap.security.core.ume.service ================= ERROR =================
Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed"
. Technical details: Client 100 is not available in this system
I ran JCmon to restart the instance.
cd /usr/sap/SMA/ DVEBMGS00/j2ee/os_lib
jcmon pf= /usr/sap/SMA/SYS/profile/SMA_DVEBMGS00_pax3
20: local Admin.
Restarted instance, but same error, client 100 is not available in this system.
std_server0.out details
===============================================================
Apr 30, 2009 4:24:50 PM com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_97] Fatal: Initialization of ABAP data
source (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed: "Client 100 is not available in this system". This message
is critical if it appears during the startup of the AS Java.
Apr 30, 2009 4:24:50 PM ...re.server.ume.service.UMEServiceFrame [SAPEngine_System_Thread[impl:5]_97] Fatal:
service com.sap.security.core.ume.service ================= ERROR =================
Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details: Cli
ent 100 is not available in this system
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:107)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException: Client 100 is not available in this system
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:445)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
... 6 more
com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details: Cli
ent 100 is not available in this system
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:107)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException: Client 100 is not available in this system
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:445)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
... 6 more
[Framework -> criticalShutdown] Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
Apr 30, 2009 4:24:50 PM com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:5]_97] Fatal: Critical shutdown was invoke
d. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
============================================================
Solution maybe obvious, create a client 100. But server0 was running fine on this node when I first installed Solution Mgr, and it is running fine on my ERP / BI system that II built from the same IDES media, ofwhich it does not have a client 100 and Java WebAS is running fine. Also, able to connect to portal via http://host:50000/irj. Only difference is I have java 1.4.2.20 installed on the BI system.
So is there some other reason why server0 will not come up?Using the search tool for property name containing "client", the only client defs in the configtool are ume.r3.connection.001-004.client under
cluster-data->Global server configuration->services->com.sap.security.core.ume.service. Values are blank. This is the same on my failing system SMA (SolMgr) and working system BIF(BI system).
The ume.r3.connection.master.client has custom value of 100. I set it to one and restarted the cluster.
The WebAS is up and running again. Don't know what could of changed it to 100.
Thanks for all your help.
-Don. -
Experts,
I have an SAP R/3 installation and one client 002 running on it. I wish to copy this client to a new one, say 003, do some changes to the config and standard programs and create some Z-programs. Is this possible without affecting my original client 002 ?
I know the data dictionary is common for all clients but the data in the client-specific tables is separate. But are the standard SAP programs, configurations and Z-programs also separate for each client?
Would a change in one client affect other clients too?
Regards
AnmolHi Anmol,
The programs, both standard and Z, are cross-client. i.e. they are common for all clients. So a client copy wont work in this case. Changes made to programs in 003 will be visible in 002 also.
Client copy will give you a copy of transactional data, master data and client-specific customizing.
Regards,
Kiran -
Advantages and Dsadvantages of Remote Client Copy over Client Transport...
Can anybody explain the Advantages and Dsadvantages of Remote Client Copy over Client Transport...
Thanks in AdvanceAdvantages of Remote client copy over client transport
1. Client-specific data as well as cross-client customizing can be copied to the target client, this is not the same in client transport.
2. The prerequisites for performing a remote client copy are that an RFC connection has to exist whereas client transport do not need RFC connection
3. The copy can be performed in parallel with several processes.
4. Remote client copy automatically performs a consistency check on the tables being copied,for client transport performance check need to be done.
5. A remote client copy is easy to use and does not require file system space on
operating system level whereas Client transport require lot of space as files are created at OS level.
Disadv
1. A remote client copy does not create a file at the operating system level,
so there is no hard copy of the client to be copied. Therefore, the same,
identical client copy cannot be duplicated at a later time.Client transport creates import and export files at Os levels
2. To be able to copy all data during the client copy, the structures of all copied
tables in both systems must be identical.
3. An automatic repository consistency check is performed in Remote client copy and if inconsistencies are detected, the client copy is terminated and an error message is displayed.
4. You cannot copy the remote client data and use it whereas in client transport you can copy the files in a cd (like import files, export files)
Also see notes
47502
557132
Rakesh -
Hi,
I have to choose between a copy with or whitout data from PRD system to DEV.
I'm little confused about the difference between System Copy and Client Copy.
Which is that includes a copy of data also?
Then, System copy = Refresh system?
Please, reply me directly, without post link.....
Many thanks.
ClaudiaHi,
Please do an SDN search of these terms.
Also read SAP Note 886102 for all system copies scenarios.
Rgds,
Colum -
No service for system BC_TREMAx, client 100 in Integration Directory
Hi, I have had this problem and spent to many hours on this. I decided to post the config once I got it working.
I am NOT using the system landscape directory for the java connector -> XI communicaiton.
The SLD is used for XI -> SAP
Scenario: send idocs
SAP Java connector -> SAP XI -> SAP 4.6c
here is the relevant code (the rest of it is in the examples of the java connector):
System.out.println("setMessageType");
doc.setMessageType("ACC_DOCUMENT");
doc.setRecipientPort("SAPSE1"); // get stuck in XI mapping if not set, otherwise not needed to get file into XI
doc.setRecipientPartnerType("LS");
doc.setRecipientPartnerNumber("SE1CLNT500");
doc.setSenderPort("BC_TREMA");
doc.setSenderPartnerType("LS");
doc.setSenderPartnerNumber("BC_TREMA");
doc.setClient("100");
Inside XI configuration integration builder
Business Service: Service: BC_TREMA
Under the menu Service - Adapter specific identifiers
Idoc Adapter Logical system: BC_TREMA (This thing is important when sending idoc XI -> SAP and should match the logical sys in the receiving SAP system)
IDoc Adapter and RFC adapter R/3 Sysytem ID: BC_TREMA
Client: 100
On receiver tab:
Name NameSpace Software componenet
ACC_DOCUMENT.ACC_DOCUMENT01 urn:sap-com:document:sap:idoc:messages TREMA_GLM, 1.0...
On sender tab:
Name NameSpace Software componenet
ACC_DOCUMENT.ACC_DOCUMENT01 urn:sap-com:document:sap:idoc:messages TREMA_GLM, 1.0...
In IDX1 trans
Port: BC_TREMA
Client: 100
RFC Destination: SE1 (A SAP test system from where IDOC def can be imported, rfc dests are setup in SM59)
In IDX2 trans
Make sure to import the IDOC type beforehand. If IDOC is not imported you get system error 000 in java connector in SP14.
That was a hard one to track down.
This should be it.
Another example where the difference is the SAP prefix...
doc.setMessageType("ACC_DOCUMENT");
doc.setRecipientPort("SAPSE1"); // get stuck in XI mapping if not set
doc.setRecipientPartnerType("LS");
doc.setRecipientPartnerNumber("SE1CLNT500");
doc.setSenderPort("SAP3MA");
doc.setSenderPartnerType("LS");
doc.setSenderPartnerNumber("TREMACLNT");
doc.setClient("100");
Inside XI configuration integration builder
Business Service: Service: TREMACLNT
Under the menu Service - Adapter specific identifiers
Idoc Adapter Logical system: TAPPMAN (This thing is important when sending idoc XI -> SAP and should match the logical sys in the receiving SAP system)
IDoc Adapter and RFC adapter R/3 Sysytem ID: 3MA
Client: 100
On receiver tab:
Name NameSpace Software componenet
ACC_DOCUMENT.ACC_DOCUMENT01 urn:sap-com:document:sap:idoc:messages TREMA_GLM, 1.0...
On sender tab:
Name NameSpace Software componenet
ACC_DOCUMENT.ACC_DOCUMENT01 urn:sap-com:document:sap:idoc:messages TREMA_GLM, 1.0...
In IDX1 trans
Port: SAP3MA (Note that the 3MA here is matched against the IDoc Adapter and RFC adapter R/3 Sysytem ID: 3MA)
(a not so well documented feature)
Client: 100
RFC Destination: SE1 (A SAP test system from where IDOC def can be imported, rfc dests are setup in SM59)
In IDX2 trans
Make sure to import the IDOC type beforehand. If IDOC is not imported you get system error 000 in java connector in SP14.
SE1CLNT500 as a SAP business system setup in the system landscape directory SLD
Receiver determination:
Sender
Service: TREMACLNT
Interface: ACC_DOCUMENT.ACC_DOCUMENT01
Namespace: urn:sap-com:document:sap:idoc:messages
Receiver
Party: *
Service: *
Configured receivers:
Service: SE1CLNT500
After saving you may do the setup in the bottom frame:
Configuration Overview for Receiver Determination
|SE1CLNT500 ->
ACC_DOCUMENT.ACC_IM_ACC_DOCUMENT Receiver _IDoc to SE1CLNT500
Interface determination
Sender
Service: TREMACLNT
Interface: ACC_DOCUMENT.ACC_DOCUMENT01
Namespace: urn:sap-com:document:sap:idoc:messages
Receiver
Service: SE1CLNT500
Configured inbound interfaces
Name Namespace Interface mapping Namespace Software comp
ACC_DOCUMENT.ACC_DOCUMENT01 urn:sap-com:document:sap:idoc:messages IM_ACC_DOCUMENT urn:trema-com:trema:trema TREMA_GLM...
Sender agreement
Not needed for IDocs
Receiver agreement
Sender
Service: TREMACLNT
Receiver
Service: SE1CLNT500
Interface: ACC_DOCUMENT.ACC_DOCUMENT01
Namespace: urn:sap-com:document:sap:idoc:messages
Receiver communication channel: Receiver_Idoc_to_SE1CLNT500
Hope this helps someone
/Otto Frost /CapgeminiHi ,
Create a technical system and bussienss system of type WEB AS ABAP and use this bussiness system for source system in XI and try it.
Thanks & Regards,
Sekhar -
I have used SAP doc mgmt for years. We copied a client and now when I configure a Class to my DMS DIR and go to CV01n Additional Data NONE of the characteristic entry boxes show up. Additional Data is blank.
It appears there must be some high level setting missing in the client. I have checked all authorizations and cannot find a difference between this client and all of the other clients we have. Only this one client does not show the class characteristics in the Additional Data tab.
Any ideas of why this standard function is not working). It does not matter which DIR I config the 017 class to, nothing shows on Additional Data.Hi,
The issue is resolved. We are working in a sandbox with Class configuration on a DMS issue related to standard class 017. There are no standard settings in SPRO - Cross-Application Components | Maintain Object Types and Class Types | for the object type DRAW that will allow "auto-populating" characteristic values as we do with VC class 300.
For whatever reason DRAW and class 017 are not configured by SAP in the same manner as class 300 for example.
We made a config entry for DRAW Class 017 VBAP. Let's just say the system did not like that.
We are exploring other options. -
Custom OIM java client not working
Hi all,
I am trying to execute a custom OIM java client in my server. The java file just has the code to connect to the OIM server and it is failing at the line
ConfigurationClient.ComplexSetting config = ConfigurationClient.getComplexSettingByPath("Discovery.CoreServer");
The basic content of the java file OIMTry.java is given below:
env.put("java.security.auth.login.config", "/u01/apps/resetpwd/config/auth.conf");
env.put("java.security.policy", "/u01/apps/resetpwd/config/xl.policy");
env.put("XL.HomeDir", "/u01/apps/resetpwd");
ConfigurationClient.ComplexSetting config = ConfigurationClient.getComplexSettingByPath("Discovery.CoreServer");
env = config.getAllSettings();
I have set the OIM related jar files in classpath in .bash_profile and able to echo the classpath as well.
However, the file is executing perfectly in Eclipse tool but not from command prompt.The file is getting compiled properly at command prompt.
I have tried various options of executing the java file as shown below.
java -Djava.security.manager -DXL.HomeDir=/u01/apps/oim_server/xellerate -Djava.security.policy=/u01/apps/oim_server/xellerate/config/xl.policy -Djava.security.auth.login.config=/u01/apps/oim_server/xellerate/config/auth.conf -Djava.naming.provider.url=jnp://oim_server_host:12401/ OIMTry
java -Dclasspath=/u01/apps/resetpwd/lib/xlUtils.jar:/u01/apps/resetpwd/lib/xlAPI.jar:/u01/apps/resetpwd/lib/xlCrypto.jar OIMTry
The error we are getting is given below:
Exception in thread "main" java.lang.NoClassDefFoundError: while resolving class: com.thortech.xl.util.config.ConfigurationClient
at java.lang.VMClassLoader.resolveClass(java.lang.Class) (/usr/lib/libgcj.so.5.0.0)
at java.lang.Class.initializeClass() (/usr/lib/libgcj.so.5.0.0)
at JvResolvePoolEntry(java.lang.Class, int) (/usr/lib/libgcj.so.5.0.0)
at OIMTry.main(java.lang.String[]) (Unknown Source)
Caused by: java.lang.ClassNotFoundException: javax.crypto.Cipher not found in [file:/u01/apps/resetpwd/lib/activation.jar, file:/u01/apps/resetpwd/lib/ojdbc14.jar, file:/u01/apps/resetpwd/lib/XLCustomClient.ear, file:/u01/apps/resetpwd/lib/commons-beanutils.jar, file:/u01/apps/resetpwd/lib/oscache.jar, file:/u01/apps/resetpwd/lib/xlDataObjectBeans.jar, file:/u01/apps/resetpwd/lib/commons-collections.jar, file:/u01/apps/resetpwd/lib/sax.jar, file:/u01/apps/resetpwd/lib/xlDataObjects.jar, file:/u01/apps/resetpwd/lib/commons-dbcp-1.2.1.jar, file:/u01/apps/resetpwd/lib/wlXLSecurityProviders.jar, file:/u01/apps/resetpwd/lib/xlDDM.jar, file:/u01/apps/resetpwd/lib/commons-digester.jar, file:/u01/apps/resetpwd/lib/xalan.jar, file:/u01/apps/resetpwd/lib/xlGenConnector.jar, file:/u01/apps/resetpwd/lib/commons-logging.jar, file:/u01/apps/resetpwd/lib/XellerateClient.jar, file:/u01/apps/resetpwd/lib/xlGenericUtils.jar, file:/u01/apps/resetpwd/lib/commons-pool-1.2.jar, file:/u01/apps/resetpwd/lib/xercesImpl.jar, file:/u01/apps/resetpwd/lib/xliGCProviders.jar, file:/u01/apps/resetpwd/lib/commons-validator.jar, file:/u01/apps/resetpwd/lib/xerces.jar, file:/u01/apps/resetpwd/lib/xlInputPreprocessor.jar, file:/u01/apps/resetpwd/lib/crimson.jar, file:/u01/apps/resetpwd/lib/XIMDD.jar, file:/u01/apps/resetpwd/lib/xlInstaller.jar, file:/u01/apps/resetpwd/lib/csv.jar, file:/u01/apps/resetpwd/lib/XL10SecurityProviders.jar, file:/u01/apps/resetpwd/lib/xlLogger.jar, file:/u01/apps/resetpwd/lib/dom.jar, file:/u01/apps/resetpwd/lib/xlAdapterUtilities.jar, file:/u01/apps/resetpwd/lib/xlRemoteManager.jar, file:/u01/apps/resetpwd/lib/ejb.jar, file:/u01/apps/resetpwd/lib/xlAPI.jar, file:/u01/apps/resetpwd/lib/xlRequestPreview.jar, file:/u01/apps/resetpwd/lib/jakarta-oro-2.0.8.jar, file:/u01/apps/resetpwd/lib/xlAttestation.jar, file:/u01/apps/resetpwd/lib/xlSampleApp.jar, file:/u01/apps/resetpwd/lib/javagroups-all.jar, file:/u01/apps/resetpwd/lib/xlAuditor.jar, file:/u01/apps/resetpwd/lib/xlScheduler.jar, file:/u01/apps/resetpwd/lib/jaxp-api.jar, file:/u01/apps/resetpwd/lib/xlAuthentication.jar, file:/u01/apps/resetpwd/lib/xlUtils.jar, file:/u01/apps/resetpwd/lib/jhall.jar, file:/u01/apps/resetpwd/lib/xlBackOfficeBeans.jar, file:/u01/apps/resetpwd/lib/xlVO.jar, file:/u01/apps/resetpwd/lib/log4j-1.2.8.jar, file:/u01/apps/resetpwd/lib/xlBackofficeClient.jar, file:/u01/apps/resetpwd/lib/xlWebClient.jar, file:/u01/apps/resetpwd/lib/mail.jar, file:/u01/apps/resetpwd/lib/xlCache.jar, file:/u01/apps/resetpwd/lib/xlWSCustomClient.jar, file:/u01/apps/resetpwd/lib/oc4jclient.jar, file:/u01/apps/resetpwd/lib/xlCrypto.jar, file:/u01/apps/resetpwd/lib/xml-apis.jar, file:/usr/share/java/libgcj-3.4.6.jar, file:./, core:/]
at java.net.URLClassLoader.findClass(java.lang.String) (/usr/lib/libgcj.so.5.0.0)
at gnu.gcj.runtime.VMClassLoader.findClass(java.lang.String) (/usr/lib/libgcj.so.5.0.0)
at java.lang.ClassLoader.loadClass(java.lang.String, boolean) (/usr/lib/libgcj.so.5.0.0)
at JvFindClass(_Jv_Utf8Const, java.lang.ClassLoader) (/usr/lib/libgcj.so.5.0.0)
at java.lang.Class.forName(java.lang.String, boolean, java.lang.ClassLoader) (/usr/lib/libgcj.so.5.0.0)
at JvBytecodeVerifier.type.compatible(_Jv_BytecodeVerifier.type&, JvBytecodeVerifier) (/usr/lib/libgcj.so.5.0.0)
at JvBytecodeVerifier.verify_instructions_0() (/usr/lib/libgcj.so.5.0.0)
at JvVerifyMethod(_Jv_InterpMethod) (/usr/lib/libgcj.so.5.0.0)
at JvPrepareClass(java.lang.Class) (/usr/lib/libgcj.so.5.0.0)
at JvWaitForState(java.lang.Class, int) (/usr/lib/libgcj.so.5.0.0)
at java.lang.VMClassLoader.linkClass0(java.lang.Class) (/usr/lib/libgcj.so.5.0.0)
at java.lang.VMClassLoader.resolveClass(java.lang.Class) (/usr/lib/libgcj.so.5.0.0)
...3 more
Please let me know if I have to set something else in the environment to get rid of this error.
Thanks,
Mahendra.Hi,
We were unable to create tcUtilityFactory instance when the env variables are set using the hashmap.
Instead it is working when we set using System.setProperty() as shown below:
System.setProperty("XL.HomeDir", "/u01/apps/OIMPwdReset");
System.setProperty("java.security.policy", "/u01/apps/OIMPwdReset/config/xl.policy");//server or client
System.setProperty("java.security.auth.login.config", "/u01/apps/OIMPwdReset/config/auth.conf");//server or client
Hope this helps other guys..
-Mahendra. -
Copying from client through se71 is getting saved as local object only?
hi.
i am copying the form from std to z form through se71.but after doing copy from client,it is getting saved automatically s a local objct $tmp.
Also,there is no option enabled to save it to transportable object.
in se80,in the object list also that object is not reflecting.check it
Re: local object to transport request for a form
just go to SE03 > object Directory > change object directory entries -
Client copy using Client Export... Failed .. Need ur advice
Hi guiys how ru all doin...
I hope some one can help me oout in this issue.iam working on sap
4.6c, windows 2003 server, oracle9.2.0.
we need to take client copy from production client 300 to dev
server using client export method so I have performed client
copy using client export.these are the list of steps which i
performed but still am facing an error.
Checklists /prerequisites before doing client export :
Source client i.e. Client 300 should be locked for all users
except Administrator.
Ensure that NO Users are logged in both NCCSAPPRD and NCCSAPDEV
Server.
Inform Downtime to Users.
At least 2 background work process should be there.
Take Offline Backup of both Production server & Development
server.
Following Jobs rescheduled for next day for Client Export
Process:
1)Collector_for_performance_monitor
2)Customer_evaluati on_information
3)Error reporting
4)Eu_out
5)Vendor_evaluation_information
6)Leave_en titlement
Remove scheduled job from DB:
1)Check opt
2)Analyze tab
Lock all users except administrator
Change database mode from Archive to Non-Archive mode
Logon in NCCSAPPRD in Client 300 the one which is to be Exported
1.Enter Transaction SCC8
2.Select the copy profile and target system NCCSAPDEV Server and
other fields as necessary.
3.Click on "Execute in Background" button.
4.Click on the "Schedule job" button.
5.Verify that all information is correct and click on YES
button.
6.Click on continue at the "Info Client Export" window.
7.Specify the start time and click on SAVE.
8.Specify an output device at the "Background print parameters"
window and click on SAVE.
9.Click on OK at the information window.
Monitor the Client copy using transaction SCC3.
when am going to transaction scc3 in that ->All transport
requests ->Exports -> in that my source client 300 is there when
am double clicking it its showing me list of how many times
client export has been performed in that my date is also there
when iam double clicking it and going to details tab this is wat
the error which its giving....
Log file:
nccsapprd\sapmnt\trans\log\NCPET00968.NCP
Preparation for export
Transport request___: NCPKT00968
System______________: NCP
tp path : tp
Version and Release: 305..15 46D
Execution of the export pre-processing methods for request
NCPKT00968
Start:Sorting and compressing the object list
End:Sorting and compressing the object list
Start:Check for existence of inactive objects
End:Check for existence of inactive objects
End:Check for existence of inactive objects
End:Creating project information
Start:Writing nametab information for key entries
End:Writing nametab information for key entries
Start:Version creation of the objects of the request NCPKT00968
End:Version creation of the objects of the request NCPKT00968
Start:Adjusting the object directory for the objects of the
request NCPKT00968
End:Adapting the object directory for the objects of the request
NCPKT00968
Preparation for export
End date and time : 200708104758
Ended with return code: ===> 0 <===
Mainexport
Transport request___: NCPKT00968
System______________: NCP
tp path : tp
Version and Release: 305..15 46D
SQL error 1652 accessing GLFUNCA: ORA-01652: unable to extend
temp segment by 128 in
SQL error 1652 accessing PPOIX: ORA-01652: unable to extend temp
segment by 128 in
Incorrect export. Request is not imported.
Main export
End date and time : 20070810152923
Ended with return code: ===> 12 <===
This is the error which am getting in the transport log.
I tried to perform 4 times client copy. the first 2 times i got
the same error and the next 2 times it ended with return code
===> 4 <===.
Plzz anyone help me out in this issue as i need to perform it
again and this time i hope with ur help it should be
successful.
Waiting for ur replies
Best regardsThe problem you have is, that your TEMP tablespace is too small on the target system, you need to increase it.
Check Note 3155 - Termination due to tablespace overflow
Markus -
Client Copy Using Client Export/Import
Hi Everyone,
This is regarding Client Copy Using Client Export/Import Method. We have two system Production and Development system. Iam planning to do a client copy from from PRD to DEV. I know most of the steps to perform Client Copy.I have some doubhts So if some one can please help me out i would really appreciate it.
!) I want to know which user should be used to perfrom Client Export ?
2) I want to know know which user to be used to perform Client delete?
3) Is there any particular USER who is recommended to perform Client Copy or any USER can do it?
4) After the Client Delete Procedure thorugh SCC5 ..to get back the client space we do Reorganization ? can anyone plzz tell me what are the tables that i need to reorganize or if anyone can provide me the steps for Reorganization i would be really thankful.
Waiting For your Replies
Best RegardsHi Mohammed,
1)I want to know which user should be used to perfrom Client Export ?
You can use your personal defined on the system UserID.
2) I want to know know which user to be used to perform Client delete?
Same as above, just make sure you have an account on the client and you log on to the right client
3) Is there any particular USER who is recommended to perform Client Copy or any USER can do it?
I am not aware that you should use a particular user. I have been doing copies/deletions with my UserID, as system administrator.
4) After the Client Delete Procedure thorugh SCC5 ..to get back the client space we do Reorganization ? can anyone plzz tell me what are the tables that i need to reorganize or if anyone can provide me the steps for Reorganization i would be really thankful.
Reorganization ( I personally) use SAPDBA tool. However -if you use ORACLE, there are other alternatives as well. What is your DB vendor? I will append more info in a bit.
Rgds,
Loukas -
SolMan 7.1 SP10: Managed Systems Configuration: client 000 OK, client 100 error
Hello,
after installing SolMan 7.1 SP10 successfully I also completed the steps "System Preparation" and "Basic Configuration".
Now I'm connecting the managed ABAP systems to the Solution Manager by performing step "Managed Systems Configuration".
After several other ABAP systems I'm now connecting our productive CRM 7.0 EHP1 system "CM3" (SAP_BASIS 702).
I also connected the CRM development and CRM quality assurance system without a problem.
For client 000 everything worked fine, the RFC destinations were created and a green light is shown.
Now the problem is to connect the productive client 100:
The log for Activity RFC Connection says:
The corresponding dev_rfc tracefile says:
**** Trace file opened at 20140326 164911 W. Europe Standard Time, by disp+work
**** Versions SAP-REL 720,0,523 RFC-VER U 3 1468763 MT-SL
======> Name oder Kennwort ist nicht korrekt (Wiederholen Sie die Anmeldung)
ABAP Programm: SAPLSM_SETUP_API (Transaction: )
Called function module: FUNCTION_EXISTS
User: SOLMAN_ADMIN (Client: 001)
Destination: 0050568713C71ED3AD9FC4F78AC9D9EB (Handle: 16, DtConId: 27FEB4E356BCF14F99EB0050568713C7, DtConCnt: 1, ConvId: 64734943,{27FEB4E3-56BC-F14F-99EB-0050568713C7})
EPP RootContextId: 0050568713C71ED3AD9FB7AD4C4859EB, ConnectionId: 0050568713C71ED3AD9FB784232C59EB, ConnectionCnt: 1
EPP TransactionId: BDFDB4E3626AF14899EB0050568713C7
But both users taken to execute this step (SAP Solution Manager Administrator "SOLMAN_ADMIN" and Managed System Configuration User "SM_ADMIN_SM3") exist and have the correct provided password.
Does anyone have a clue?
Kind regards
Rüdiger HöckelHello Ranjith,
thanks for your quick response.
The ST-A/PI software component is the same on all systems: 01Q_700 #2.
SolMan system: SM3
CRM systems: CM0 (ok), CM1 (ok), CM3 (problem with client 100, client 000 OK).
I also tried the recommendation found in the SAP Community Network
(http://scn.sap.com/thread/3483642) but this didn't help either:
1.Delete system from LMDB.
2.Delete system from SLD of solman.
3.Re- register the system to SLD of solman(rz70 for AS ABAP)
[the LMDB synchronizes with the SLD every 10 minutes, system CM3 is visible again in the LMDB]
4.Now follow the steps in managed system configuration.
The wizard worked fine for client 000 but throws this error for client 100.
I use all the latest installation and configuration guides.
For this step I'm using the guide "Managed System Configuration" that is available in the SOLMAN_SETUP wiki.
https://websmp206.sap-ag.de/~sapidb/011000358700001120342013E.pdf
Kind regards
Rüdiger
P.S. In total I have already connected eight systems (SAP_BASIS 700 to 731) but this is the first system that gives an error.
Maybe you are looking for
-
When I query based on Tcode, using SUIM , I am getting a list of Roles. But I could see, some other Tcodes are also present in authorizations. which is the exhustive way to list all the Roles, based on Tcode. Should I use AGR_1251 table? is it comple
-
Please help answer this question!
-
Where do I insert target='_blank'
Im customizing an IE toolbar plugin and there is a button you can use to open a selected (highlighted) non active url. It opens the link in the same window. It opens and works fine but I want the link to open in a new window. I just cannot figure out
-
Hello, Whenver I try and upgrade my game and need to pay for the new items, I keep getting a message that "the app was purchased by a different Appllie ID. To buy this item with this Apple ID, you must first purchase the app." I have never had a diff
-
Adobe Reader undefined error and offending command LLAQLY
Hi Guys, I am in an urgent need of help regarding the error below since it is my boss pc: Error Name: /undefined Offending Command: LLAQLY+TimesNewRomanPSMT Operand Stack: false This output was give after printi