Delivery date does not match sales orders  proposed delivery date

when i create sales order the requested delivery date by default is todays date and if nobody changes it, it will stay the same even after i save the order but the acutal delivery date is diffrent in the sales document or delivery document
can anyone please throw some light on it
Thanks in advance

Hi Raj,
Req D Date is the date on which teh custoemr wants the goods to be delivered. But it wont be possible always. So there will be an availability check on the stock of that material and based on the availability and transportation lead times, the possible delivery date will be determined and populated at the schedule line level of the document.
Hope this clarifies your doubt.
Reward if this helps.

Similar Messages

  • Stock transport order requiremnet date does not match in tranRRP3) &MD04

    STO delivery date does not match in transaction MD04 (ECC 6.0) and RRP3 (SCM5.1). This situation occurs when delivery date in STO is past due.  During Shipment Scheduling & avaibilty check, materail staging/availability date(EKET-MBDAT) get updated with current date. This EKET -MBDAT date is reflecting in the stock requirement list as a requirement date which is correct. Still APO product view screen dispalys the past due date as a requiremnet date instead of date in MBDAT.
    Please let me know in case of any more clarification on this.

    Dear Sanjay,
    STO Delivery Date is receipt date at destination location. This minus Transportation Lead time is STO requirement date at source.
    When you conduct ATP check for this PO/STO, your committed date is updated at source and delivery date will be updated as committed date plus TL lead time.
    Do check your GR/GI times in Product Master as primary date mismatch issue.
    If you are using any Customized program for updating EKET-MBDAT, it wont automatically trigger the change date in APO.
    In such cases you need to run CCR in APO and reconcile.
    The better way is to periodically schedule IM initialization (RIMODINI). This maps all R3/ECC data in your IM for PO/STOs and you would see the consistency in APO and ECC.
    Regards,
    Bipin

  • Job Cancelled with an error "Data does not match the job def: Job terminat"

    Dear Friends,
    The following job is with respect to an inbound interface that transfers data into SAP.
    The file mist.txt is picked from the /FI/in directory of the application server and is moved to the /FI/work directory of application server for processing. Once the program ends up without any error, the file is moved to /FI/archive directory.
    The below are the steps listed in job log, no spool is generated for this job and it ended up with an error "Data does not match the job definition; job terminated".Please see below for more info.
    1.Job   Started                                                                               
    2.Step 001 started (program Y_SAP_FI_POST, variant MIST, user ID K364646)                           
    3.File mist.txt copied from /data/sap/ARD/interface/FI/in/ to /data/sap/ARD/interface/FI/work/.
    4.File mist.txt deleted from /data/sap/ARD/interface/FI/in/.                                   
    5.File mist.txt read from /data/sap/ARD/interface/FI/work/.                                    
    6.PD-DKLY-Y_SAP_FI_POST: This job was started periodically or directly from SM36/SM37 (Message Class: BD, Message Number : 076)  
    7.Job PD-DKLY-Y_SAP_FI_POST: Data does not match the job definition; job terminated (Message Class : BD, Message No. 078)    
    8.Job cancelled after system exception
    ERROR_MESSAGE                                                
    Could you please analyse and come up about under what circumstance the above error is reported.
    As well I heard that because of the customization issues in T.Code BMV0, the above error has raised. 
    Also please note that we can define as well schedule jobs from the above transaction and the corresponding data is stored in the table TBICU
    My Trials
    1. Tested uplaoding an empty file
    2. Tested uploading with wrong data
    3. Tested uploading with improper data that has false file structue
    But failed to simulate the above scenario.
    Clarification Required
    Assume that I have defined a job using BMV0. Is that mandatory to use the same job in SM37/SM36 for scheduling?
    Is the above question valid?
    Edited by: dharmendra gali on Jan 28, 2008 6:06 AM

    Dear Friends,
    _Urgent : Please work on this ASAP _
    The following job is with respect to an inbound interface that transfers data into SAP.
    The file mist.txt is picked from the /FI/in directory of the application server and is moved to the /FI/work directory of application server for processing. Once the program ends up without any error, the file is moved to /FI/archive directory.
    The below are the steps listed in job log, no spool is generated for this job and it ended up with an error "Data does not match the job definition; job terminated".Please see below for more info.
    1.Job Started
    2.Step 001 started (program Y_SAP_FI_POST, variant MIST, user ID K364646)
    3.File mist.txt copied from /data/sap/ARD/interface/FI/in/ to /data/sap/ARD/interface/FI/work/.
    4.File mist.txt deleted from /data/sap/ARD/interface/FI/in/.
    5.File mist.txt read from /data/sap/ARD/interface/FI/work/.
    6.PD-DKLY-Y_SAP_FI_POST: This job was started periodically or directly from SM36/SM37 (Message Class: BD, Message Number : 076)
    7.Job PD-DKLY-Y_SAP_FI_POST: Data does not match the job definition; job terminated (Message Class : BD, Message No. 078)
    8.Job cancelled after system exception
    ERROR_MESSAGE
    Could you please analyse and come up about under what circumstance the above error is reported.
    As well I heard that because of the customization issues in T.Code BMV0, the above error has raised.
    Also please note that we can define as well schedule jobs from the above transaction and the corresponding data is stored in the table TBICU
    My Trials
    1. Tested uplaoding an empty file
    2. Tested uploading with wrong data
    3. Tested uploading with improper data that has false file structue
    But failed to simulate the above scenario.
    Clarification Required
    Assume that I have defined a job using BMV0. Is that mandatory to use the same job in SM37/SM36 for scheduling?
    Is the above question valid?

  • Background Job cancelling with error Data does not match the job definition

    Dear Team,
    Background Job is getting cancelled when I run a Job on periodically but the same Job is executing perfectly when I run it manually(repeat scheduling) .
    Let me describe the problem clearly.
    We have a program which picks up files from an FTP server and posts the documents into SAP. We are scheduling this program as a background Job daily. This Job is running perfectly if the files contain no data. But if the file contains data the JOb is getting cancelled with the following messages.
    And also the same Job is getting executed perfectly when repeat scheduling is done ( even for files with data).
    Time     Message text                                                                       Message class Message no. Message type
    03:46:08 Job PREPAID_OCT_APPS2_11: Data does not match the job definition; job terminated        BD           078          E
    03:46:08 Job cancelled after system exception ERROR_MESSAGE                                      00           564          A
    Please help me in resolving this issue.
    Thanks in advance,
    Sai.

    hi,
    If you have any GUI function modules used in the program of job
    you cannot run it in background mode.

  • Regarding "Data does not match the job definition; job terminated"

    Dear Friends,
    The following job is with respect to an inbound interface that transfers data into SAP.
    The file mist.txt is picked from the /FI/in directory of the application server and is moved to the /FI/work directory of application server for processing. Once the program ends up without any error, the file is moved to /FI/archive directory.
    The below are the steps listed in job log, no spool is generated for this job and it ended up with an error "Data does not match the job definition; job terminated".Please see below for more info.
    1.Job Started
    2.Step 001 started (program Y_SAP_FI_POST, variant MIST, user ID K364646)
    3.File mist.txt copied from /data/sap/ARD/interface/FI/in/ to /data/sap/ARD/interface/FI/work/.
    4.File mist.txt deleted from /data/sap/ARD/interface/FI/in/.
    5.File mist.txt read from /data/sap/ARD/interface/FI/work/.
    6.PD-DKLY-Y_SAP_FI_POST: This job was started periodically or directly from SM36/SM37 (Message Class: BD, Message Number : 076)
    7.Job PD-DKLY-Y_SAP_FI_POST: Data does not match the job definition; job terminated (Message Class : BD, Message No. 078)
    8.Job cancelled after system exception
    ERROR_MESSAGE
    Could you please analyse and come up about under what circumstance the above error is reported.
    As well I heard that because of the customization issues in T.Code BMV0, the above error has raised.
    Also please note that we can define as well schedule jobs from the above transaction and the corresponding data is stored in the table TBICU
    My Trials
    1. Tested uplaoding an empty file
    2. Tested uploading with wrong data
    3. Tested uploading with improper data that has false file structue
    But failed to simulate the above scenario.
    Clarification Required
    Assume that I have defined a job using BMV0. Is that mandatory to use the same job in SM37/SM36 for scheduling?
    Is the above question valid?

    Hi dharmendra
    Good Day
    How are you
       I am facing the same problem which you have posted
    By any chance have you got the soultion for this
    If so please let me know the solution for this.
    Thanks in advance.
    Cheers
    Vallabhaneni

  • ORA-23327: imported deferred rpc data does not match GLOBAL NAME of ..

    Hi,
    We took an export of a production database in Oracle 9i (9.2.0.7) and created a new database on a test server with Oracle 10g (10.1.0.5)
    The original production database was called DC20 and our new test database is called SD20.
    Looking at the logs after the import we're seeing this error:
    "ORA-23327: imported deferred rpc data does not match GLOBAL NAME of importing db"
    We've looked into it a little and it seems to make sense because the names of the databases are different, and from what we've read, we really didn't need to do a full import including SYSTEM anyway. We also came across a solution telling us:
    "If you are not using Replication on the target database, these errors can be ignored. However, you should subsequently remove all the replication objects by running:
    $ORACLE_HOME/rdbms/admin/catrepr.sql, then catproc.sql"
    What I was wondering was if someone could validate that running these scripts and ignoring the errors will be ok, or if they'll cause us issues further down the line.
    In case its needed, heres my Export parameter file
    "FULL=Y
    DIRECT=Y
    LOG=E:\Exports\DC20\Log\expDC20.LOG
    FILE=E:\Exports\DC20\Data\DC20.DMP"
    and heres my Import parameter file
    "FULL=Y
    COMMIT=Y
    GRANTS=N
    IGNORE=Y
    BUFFER=500000
    FILE=E:\Imports\SD20\data\SD20.dmp
    LOG=E:\imports\SD20\log\impSD20.LOG"
    Thanks for your help!

    Thanks Neil, we did already see this note and added it to our list of possible solutions. After we found this one, we also found the one I quoted, which would seem to be the path of least resistance (it would save a good 10 hours in import time if nothing else).
    However, if we can't do what I'm asking about in my original post however, the note you mentioned will be our next route..

  • Custom fields in additional data B not displaying - Sales Order

    Hi gurus,
    I added some custom fields to the addtional data B tabstrip in sales order screen, but they didn't display. This is in the client's system. BUT in our own system it works perfectly. The screen has been activated.
    Maybe it's because of the version difference?
    Anyone experienced this before?
    Any suggestion will be great.
    Thanks

    Resolved by myself.
    For those who would have the same question, please refer to SAP note 386694.

  • XVBAP has the new line item but does not update Sales Order

    Hi
    I need to update the sales order with a new line item when the line item has a base unit of measure as the sales unit. I need to then convert the base unit to sales unit with a whole figure and the rest can be in the base unit.
    I am able to see the update in the xvbap but the line item doesn't get updated.
    I am puting this code in a perform within
    MV45AFZB  within   Form  USEREXIT_CHECK_VBAP
    But I guess I am doing something wrong can someone please take a look at it and tell me what is wrong with the coding.
    *&  Include       ZSD_CREATE_NEW_LINE_ITEM              *
    *&      Form  create_new_line_item
          text
    -->  p1        text
    <--  p2        text
    FORM CREATE_NEW_LINE_ITEM .
      CONSTANTS: C_MEINH LIKE MARM-MEINH VALUE 'CSE'.
    Variables Used
      DATA: WS_WMENG LIKE VBEP-WMENG.
      DATA: INPUT  LIKE VBAP-KWMENG,
            WS_EA  LIKE VBAP-KWMENG,
            WS_CSE LIKE VBAP-KWMENG.
      DATA: WS_MVKE_VRKME LIKE MVKE-VRKME.
    Internal Tables and Structures
      DATA: WS_XVBAP LIKE XVBAP.
    DATA:
    it_vbap  LIKE vbap OCCURS 0 WITH HEADER LINE,
    it_vbep  LIKE vbep OCCURS 0 WITH HEADER LINE,
    it_xvbap LIKE vbapvb OCCURS 0 WITH HEADER LINE.
      DATA: BEGIN OF WS_MARM,
              MEINH LIKE MARM-MEINH,
              UMREZ LIKE MARM-UMREZ,
              UMREN LIKE MARM-UMREN,
            END OF WS_MARM.
      CLEAR WS_MVKE_VRKME.
      SELECT SINGLE VRKME INTO WS_MVKE_VRKME
        FROM MVKE
        WHERE MATNR EQ XVBAP-MATNR
        AND   VKORG EQ XVBAK-VKORG
        AND   VTWEG EQ XVBAK-VTWEG.
      IF VBAP-VRKME <> WS_MVKE_VRKME.
       LOOP AT XVBAP.
          SELECT SINGLE MEINH UMREZ UMREN
            FROM MARM
            INTO WS_MARM
            WHERE MATNR = VBAP-MATNR
            AND   MEINH = WS_MVKE_VRKME.
          IF XVBAP-MEINS <> WS_MVKE_VRKME.
            IF NOT XVBAP-KWMENG = 0.
              WS_WMENG = XVBAP-KWMENG / WS_MARM-UMREZ.
              IF WS_WMENG > 1.
    This means that the line item needs to be split into CSE & EA
                  INPUT  = XVBAP-KWMENG.
                  WS_EA  = INPUT / WS_MARM-UMREZ.
                  WS_CSE = WS_EA.
                  WS_EA  = WS_CSE * WS_MARM-UMREZ.
                  WS_EA  = INPUT - WS_EA.
    Now we have the qty. split into EA & CSE. Now to
    assign it to xvbap
                  XVBAP-KWMENG = WS_EA.
                  XVBAP-VRKME  = WS_MVKE_VRKME.
              READ TABLE XVBAP WITH KEY POSNR = XVBAP-POSNR.
                MODIFY XVBAP INDEX SY-TABIX.
                  WS_XVBAP = XVBAP.
                  WS_XVBAP-KWMENG = WS_CSE.
                MOVE-CORRESPONDING WS_XVBAP TO XVBAP.
                INSERT XVBAP INDEX SY-TABIX.
              ENDIF.
            ENDIF.
          ENDIF.
      ENDIF.     " IF xvbap-vrkme 'EA'.
    ENDFORM.    " create_new_line_item

    Hi Clark,
    Pls check the Include MV45AFZZ instead of the one which you are using . Here in this include MV45AFZZ you can have access to the Header and Line items data .
    Here in this include
          FORM USEREXIT_SAVE_DOCUMENT                                   *
          This userexit can be used to save data in additional tables   *
          when a document is saved.                                     *
          If field T180-TRTYP contents 'H', the document will be        *
          created, else it will be changed.                             *
          This form is called at from form BELEG_SICHERN, before COMMIT *
    form userexit_save_document.
    Endform.
    Either you can write the code you want to update the XVABP table here or you can use the form .
          FORM USEREXIT_MOVE_FIELD_TO_VBAP                              *
          This userexit can be used to move some fields into the sales  *
          dokument item workaerea VBAP                                  *
          SVBAP-TABIX = 0:  Create item                                 *
          SVBAP-TABIX > 0:  Change item                                 *
          This form is called at the end of form VBAP_FUELLEN.          *
    form userexit_move_field_to_vbap.
    endform.
    This are the 2 performs in this include where you can do you code and it will defnitely solve your problem.
    Good Luck to you . Let me know if your problem get solved.
    Thanks & Regards,
    Naidu.

  • Delivery qty should not exceede Sales order qty

    Dera Friends,
    System is allowing to create delivery for a higher quantity than in sales order. For eg. The sales order is created for 10 pieces and delivery is created for 20 pieces.
    We want to have a check on this. Pls guide where we can configure this. Our requiremnt is that Delivery qty should not exceede the sales order qty.
    points assured
    Krishna>C

    hi,
    Go to VTLA, select your order type and delivery type and select item category and see whether you have maintained the following:-
    Order requirements:::::101
    Item Data:::::::::::::::::::101
    Updata Document flow:::X
    Pos./neg.quantity::::::::::+

  • BAPI does not create Sales order

    Hi All,
    I am using BAPI_SALESORDER_CREATEFROMDAT2 to create sales order.
    It is working fine till now.
    But I found that whenever there is a material whose condition price is maintained and doesnot match with the valuation type, the Sales order does not get created, neither it gives any error msg.
    For e.g For Valuation type Consign , condition type ZPCS is valid and similarly for Turnkey , condition type ZPTK is valid.
    if a material has valuation type consign and condition type ZPTK.. The SAP system ofcourse will not allow to create a SO unless we delete the ZPTK entry from the SO and create ZPCS...
    BAPI also doesnot create the SO but doesnot return the error messge too.
    I try to put the ZPCS value to BAPI thru BAPICOND..but still not working?
    How do i handle such case?
    Points will be awarded to useful ans

    Hi,
    If you are saying that you cannot create a sales order with the Valuation type and Condition type mismatch even through VA01 manually, then there is nothing much you can do in BAPI also.
    2nd Case is you say that that BAPI RETURN table is not getting populated and it is empty in this issue which is not letting you know that Sales order is not Created.
    The one work around for this issue is you can check the exporting parameter SALESDOCUMENT if it has the Sales Order number or not. if the RETURN table is empty and the SALESDOCUMENT field has SO Number, then SO is created and if RETURN table is Initial and SALESDOCUMENT is also Initial, then it is the issue that you are facing.
    Also try posting a Query in OSS.
    regards,
    Mahesh

  • Query data does not match with Multiprovider

    hello,
    I am as confused as my subject.
    I executed the query from Multiprovider, which getting the data from sales and inventory cube.
    Everything works fine until I try to validate some of the data.
    I can validate some early records but I cannot see later ones in any of the cubes or multiprovider.
    I deleted the data and loaded all over again but didnt work.
    I am trying to display the record from Plant, material and calday ... i do see the date and plant # but not material #.
    I hope I am making sense to you guys.
    Any input would be appreciated.
    Khalid

    Hello Kalyan,
    Material is part of both cubes (inventory and sales) and I did flag it in multiprovider when selecting "display data" > dimensions.
    I am not sure if it makes difference ... there is another cube (store planning)  attached to same multiprovider ... which not feed data but as you know does not report on material level.
    Do you think it could create the problem. Again (store planning) cube is not feeding data to multiprovider at the moment.
    Thank You ... any other suggestion.
    Khalid

  • IPC requirement does not effect sales order

    Hi,
    I wrote a pricing requirement  in java extending RequirementAdapter.
    I uploaded it to the CRM system. When the requirement  is called, it writes messages to the VMC log and i can see the result of the requirement  : "true" or "false" .
    The problem is that the result of the requirement  does not effect the condition in the sales order - nothing happens no matter what the result value is.
    What should I do in order to get an error message in the sales order when the requirement returns false?
    Thanks
    Tomer

    Hi Michael,
    If the requirement will not trigger any error message by default according to the returned value, what excaly do I need to do in order to achieve that? Is there a BADI or user exist  where I can check the returned value and raise the message?
    Thanks,
    Tomer

  • VA01 BDC does not return sales order number

    Hi All,
    I am using BDC to create sales orders using transaction VA01. Most of the time I have no problems using this method. However, for some orders no order number is returned.
    I know that BDC is not the best way of doing things, but we have customized the sales order screens a lot and therefore can't use BAPI, so we need to use BDC.
    I have used display mode 'A' when calling the transaction and I know that all the screens populate correctly. Then when the order saves, no order number is provided. The just created order can't be found by searching using the sold-to party, so the order appears to not have created. However, when I look in the table of messages returned from the transaction, there are no errors.
    <b><REMOVED BY MODERATOR></b>
    Thanks in advance,
    Dan
    Message was edited by:
            Alvaro Tejada Galindo

    Why don't use update mode called 'S'.
    call transaction 'VA01' using BDCDATA
                           MODE 'N'
                           update 'S' -> use this one.
                           messages into bdcmsgcoll.
    Thanks
    Seshu

  • Outline Agreement (Contract) data does not match with EKPO table.

    Hi,
    I have created a outline agreement(Contract) with net price as 100 / 1 Kg. But when I go to EKPO table in front of Net Price it is reflecting net price as 1 / 1 Kg. So it shows that it is dividing the net price by 100 in Table EKPO. This is happening with the currencies which are maintained in T Code OY04 (Currencies like JPY, CLP, ESP, ITL) with decimals as 0.
    Rest all curriencies which have not maintained in OY04, there is no problem in EKPO as the data matches with Outline Agreement Net Price.
    Request you to please provide the input to resolve the same.
    Thanks & Regards,
    Neeraj Singh

    Hi Neeraj Singh,
    The value of data stored in EKPO depends on the decimal places defined
    for the currency. In standard the decimal places is taken as 2 . Therefore the value will be
    the same as order price if the currency is defined for two decimal
    places ( default is 2 ).
    However, if the decimal places for JPY is defined as zero the table
    will show a value of price /100. If you choose a currency with
    3 decimal places the value in the table will be price * 10 and so on.
    Example:
    Currency                          Decimal places      Order price      Value in EKPO
    SGD                                               2               2000               2000
    NLG                                               2               2000               2000
    JPY                                               0               2000               20
    KWD (Kuwati Dinar)                     3               2000               20000
    ITL                                                 0               2000               20
    All currencies that do not have any decimal places at all
    (TCURX-CURRDEC = 0) must have EKPO-NETPR multiplied by 100.
    Please check SAP notes which may be of help to understand this issue 53206 and 137626
    The issue you reported in not an error but standard.  I hope this information is of help.
    Regards,
    Lorraine
    Edited by: Lorraine Donnelly on Jul 12, 2010 6:57 PM

  • Download Interactive Report data does not match on-screen data

    Hi,
    I have a page which has a process which runs a query and returns a random % of rows from a table, and saves this into a collection.
    Then, based on the random rows, I want to select data from another table, where the rows match certain columns in the collection.
    I have created a query to select the data I want, and have it displayed in an Interactive Report region.
    The data on the screen is fine, but when I go to 'Dowload' the data to csv or excel from the Interactive report, the data is different.
    I have also created a normal report region with the same query, and when I download it from here, it works fine, so I know it has nothing to do with the query.
    Any ideas?
    Amanda.
    The process details are:
    Process Point: On Load - Before Regions
    Run Process: Once per page visit
    Then in the Interactive report query is something like:
    Select ..
    from
    DATA_TABLE c
    select
    c001 User_Id,
    c002 Account_No,
    c003 Transaction_Date
    from htmldb_collections where collection_name='PX_COLLECTION'
    *) d*
    where
    c.user_id = d.user_id AND
    c.account_no = d.account_no AND
    c.transaction_date = d.transaction_date

    Hi,
    This is because of web caching. You should invalidate the page caching in the access tab of page properties or you just change the page url with a dummy paramater like this
    http://domain/portal/page?_pageid=6,1,6_11&_dad=<dad>&_schema=<schema>&1=1
    Here &1=1 is a dummy parameter
    This will invalidate the cache and the page will be refreshed.
    Thanks,
    Sharmila

Maybe you are looking for