Limiting the time when Sales Orders can be confirmed on the same day

Hello Gurus. The business has a requirement where they want to limit the time of the day when they can confirm sales orders on the same day.
So, when they receive a sales order, they want that if the order is received after a certain time (e.g. 14:00) then it cannot be confirmed for that same day, it can only be confirmed the next day.
How can I implement this limitation?

Fernando,
Let me restate your requirement so that I understand your question: 
A Sales order is created 'today' with a requested delivery date of 'today'.
There exists adequate material in Stock to confirm the order.
You want the confirmed date to be 'some-amount-of-time-later-than-now"
(say 18 hours or so)
Which confirmed date in the sales order are you talking about?
Confirmed Material Availability date?
Confirmed Loading date?
Confirmed Transportation planning date?
Confirmed Goods Issue date?
Confirmed Delivery Date?
Many people with this requirement use 'delivery scheduling', and add a half day or so in pick/pack processing time.  This means that you are recognizing that it takes a bit of time to create the delivery notice, print the shipping papers, pick and pack the parts, and get them ready for the carrier to ship.  So, for an order entered 'now', it wouldn't be due to ship from your warehouse until 'a half day from now'.
To enable Delivery scheduling  IMG>SD>Basic Functions>Delivery scheduling and transportation scheduling>Define scheduling by sales document type. Select the relevant ordertypes, tick delivery scheduling.
If this is already selected, then you can increase the pick/pack processing time of the shipping point in IMG transaction OVLZ.  It can be set to a fraction of a day (2 decimal points).
Regards,
DB49

Similar Messages

  • Most of the time when I turn computer on I get the white screen and question mark.  Sometimes it will turn on and work but often the spinning disk starts and especially when opening Iphoto and it generally freezes

    Most of the time when I turn on the Mac I get the white screen and question mark appear.  Sometimes it will turn on and work. But often the coloured spinning wheel starts up especially after trying to use iphoto it freezes and a couple of times the screen has then gone black.  The computer seemed pretty warm yesterday when this happened.
    Any suggestions of what I should do to fix it would be greatly appreciated.
    Kate

    See this on the question mark when you start up: http://support.apple.com/kb/TS1440?viewlocale=en_US
    See this on the spinning beach ball: http://www.thexlab.com/faqs/sbbod.html

  • All the time when it is a new update on the phone My phone allwase get ****** upp. I can't go on apps or it will freze. And i don't have 1,4 GB left, so i HATE that it will stop working! What can i do beside i have to update?

    HElp
    <Edited by Host>

    Hello Catflow,
    Connect your iphone from system through Itunes take a backup on system or icloud. And restore the device. Hope this will work for you.

  • When sales order get cancelled

    Hi Gurus
    Please explain the  process when sales order is created for 10 QTY and production order released for 10 qty and all operations confirmed for 5 QTy & moved to FG remaining  5 no qty is in WIP, so then sales order get cancelled, and got another new sales order with different specifications with same qty.
    now i want convert the cancelled sales order qty to new sales order qty
    please explain me step by step
    with Regards
    Laxmipathi.G.V

    Hi
    Anyway you were doing the Activity confirmation for the 5 quantities at the operation stage.
    so the component only consumed for this production .when you check the material document for the particular confimation . you can see the component was consumbed. ( 261 movement)
    So you do the reverse the confirmation at the operation stage  CO13 . and you can reverse the components back to the production storage location back. (movement type 262)
    Edited by: raj on Jun 8, 2009 8:11 AM

  • Sales Order Confirmation when sales order goes for Credit Block

    want Sales Order to be Confirmed , i e Schedule line Confirmation , when sales order goes for Credit Block
    How i can Achieve this?
    Even when set for Sales Document typpe credit check as 'D' and credit group as ;03; ie at Goods Issue still order is not getting confirmed.

    I am not sure, why you want schedule line to be confirmed for credit blocked sales orders. Re-confirm with the client.
    There are controls when defining delivery blocks.
    Goto IMG - Log.Execution-Shipping - Deliveries- Define delivery blocks( check menu path in system, may not be same as shown here).
    Select 01- credit block " untick" from "Confirmation" Column.
    Now test with & see how ti works.
    Regards,
    Reazuddin MD

  • At the time of Sales Transaction Header & Item Text is not coming in print

    Hi Gurus,
    At the time of Sales order or Outbound Delivery or Invoice if I am giving text in Header or Item text it is not coming in Print , Please let me know Gurus what I need to do for it ,
    I need to get print of my text name also , means If I am typing Vehical no. in front of Vehical number text coloum , I wants to print Vehical Number : XYZ 01 123 in Print
    Please help me in this issue,
    Please let me know how we can add text in Excise Invoice,
    & Which Excise Register need to update from Sales ,
    & how to do it ,
    Please help me Gurus,
    Thanking you ,
    Reagrds,
    Sai

    Dear Sai,
    Take help of ABAPer to capture the header or item text in to the print copy of sales order ,delivery and invoice.
    I hope this will help you,
    Regards,
    Murali.

  • Sales order info and quantity in the invoice accounting document

    Hi,
    When saving the accounting document at sales invoicing time, I do not succeed in retrieving information such as the quantities sold, sales order number,... whereas the field status group for the concerned account is activated (optional) for the field "quantity" and "sales order".
    Moreover, there is a field I would to retrieve the net weight that is displayed in the sales invoice, in my accounting document. Is this possible?
    Thank you for your help,
    Ronan

    Hi Kapil,
    Just commit the data base .Generally when we create any data using fm or bapi it wont commit database. Take the fm and sequentially use another fm if you did this from se37. If you did this from report just commit data base. It will commit data base and create a record. Please close the thread if it is answered.
    Regards,
    Madhu.

  • Comparing shelf life exiration at the time of sales picking goods

    Dear all
    I have a scnerio
    My client is handling material with shelf life.Some customer wants material with specific shelf life.
    Now at the time of sales order delivery how system checks that the material with shelf life is meeting the customer requirement.
    Thanks
    Nilanjan

    Hi,
    You can use batch determination strategy with correct search criteria and create batch search strategry record on customer level.
    Regards,
    Marcin

  • Load a sales order with delivery date in the past

    Hi,
    We want to load in the system a sales order with delivery date in the past, and maintain the schedule delivery date in the past. To do that, in the customizing Sales And Distribution / Basic Functions / Delivery Scheduling and Transportation Scheduling / Define Scheduling By Sales Document Type, I selected the flag Blackwards. But the problem is that the rest of the dates in the scredule line: goods issue date, loading date, material avail.date and transportation Plan Date, are in blank and you cannot enter any data because the system deletes it.
    How can I have these dates informed with dates in the past?
    Thanks in advance,

    You can control this using the "Message Control" in the SAP IMG.
    Supplier Relationship Management>SRM Server>Cross-Application Basic Settings>Message Control>Influence Message Control
    Using this you convert Error to Warning or even swith off this message.
    Please refer this thread for complete steps:
    Re: How to change an error message to a warning message in SRM
    Note: you need to suppress the messages relevant to your case here.
    Regards
    Kathirvel

  • Batch number coming automatically at the time of Process order release

    Hi All,
    I want the system generated batch number for header material to come automatically at the time of process order release.
    At present ,the batch number is entered manualy dering process order creation.
    Can anyone pls guide abt the settings required for the same

    Dear,
    Define the  production scheduling profile CORY then
    Auto Batch Creation = 2 On release.
    Then assign this to your FG or SFG materials in work scheduling view in material msater MM02. Then create new order and check.
    Now for automatic generation i have to set internal number asignment for batches.
    Batch will create for movement type say 101 SPROLogistics - GeneralBatch mangment--Creation of New Batches --Define Batch Creation for Goods Movements. so it will have same logic in MM for 101 GR against PO will be internal number range but no effect in SD.
    Regards,
    R.Brahmankar
    Edited by: R Brahmankar on Mar 12, 2010 12:40 PM

  • Profit center updation at the time of delivery order

    Hi,
    We have three profit centers & three finished goods..All the three finished goods are manufactured  in all the three profit center.At the time of sales order , i am not sure from which profit center i am going to deliver to the customer.so i want to update the profit center field at the time of delivery order.
    How to tackle this problem? Please advice
    Regards
    Sarang
    09937732217

    Dear Sir;
    i have the same your problem but in the deferent way but also i need to change the profit center in the delivery wise
    thanks
    Mohamed Helmy
    +20 10 222 0 386

  • Displaying the time when the iphone is asleep

    Sincere apologies if this has been posted elsewhere.
    On my ancient Nokia phone, I was able to have the time displayed when the phone was asleep. Is this possible on the iphone? I don't want a nightstand type app, because I'm hoping not to use up too much battery. It would be handy to have the time displayed so I can quickly glance at the phone to check the time as it sits on my desk.

    There are different LCD technologies - with older ones the image could be visible (but poorly) without backlighting (reflective). Newer technology (transmissive) shows better images with greater viewing angles but require backlighting.
    iPhone's LCD seems to be fairly viewable in bright sunlight, so I'd be willing to say that it might be possible to show a readable image (displaying time, at least) without the backlighting, but that capability would have to be supported by the phone (display image, turn off backlighting) and currently it is not.

  • Need of User-Exit  in the creation of Sales Order(VA01)

    Hi,
    In the creation of Sales Order, I need to Compare the Ordered Quantity and Confirmed Quantity. If the CQ is less than OQ I need to create one more line item with the same material for the rest of the quantity and send the request to Production order for the remaining quantity. For this I am unable to get the exact exit. Please help me in this regard ASAP.
    Thank you.

    the following program are the user exit for billing.
    we often use RV60AFZC and RV60AFZZ.
    RV60AFZA
    RV60AFZB
    RV60AFZC
    RV60AFZD
    RV60AFZZ
    RV60BFZA
    For Sales order
    Pricing, item addtion deletion
    MV45AFZZ
    First, I did not find documentation for the BADI either. But at the first glance the process of implementing it looks quite straightforward. I assume you run R/3 Enterprise (4.7). So, you should implement BADI 'BADI_SD_SALES' - this must be done in transaction SE19. In particular for the purpose of adding some additional items into sales document I would implement method SAVE_DOCUMENT_PREPARE. This method has changing table parameter FXVBAP of type VA_VBAPVB_T - it holds all the sales document items. Just add items of yours to it. Certainly, you have to fill all the appropriate fields carefully.
    Hope this helps somehow.
    In that case you should use USEREXIT_DOCUMENT_SAVE_PREPARE subroutine (form). As far as I remember it has no parameters. To add items to the sales document you should modify internal table XVBAP.
    regards
    vinod

  • Upload the data for sales order using BAPI

    hi experts,
    how to upload the data for sales order using BAPI.
    what is the FM?
    it would be much helpful if i have the sample code as i am very new to BAPI.
    thanks and Regards
    Shyam

    Hi  Shyam
    Its very useful for u
    BAPISDORDER_GETDETAILEDLIST
    BAPI_ACC_SALES_ORDER_CHECK
    BAPI_ACC_SALES_ORDER_POST
    BAPI_ACC_SALES_QUOTA_CHECK
    BAPI_ACC_SALES_QUOTA_POST
    Reward all the helpful answers..
    With Regards
    Navin Khedikar

  • Spliting up the G/L account in time of Sales Order creation .

    Hi,
    I am an ABAPer. Please let me know using ABAP code how to split the G/L account in time of Sales Order creation for a Payment Card.
    Shyamal.

    Hiya,
    Don't have the system before me, but I think the approx path is:
    IMG --> Controlling --> Profitability Analysis --> Master Data --> Valuation --> Define and Assign Val Strategies (I think it is KE4U).
    Look up the Val Strategy assignments and look for anything with Record Type "A".
    Secondly, look for:
    IMG --> controlling --> Profitability Analysis --> Actual Postings --> Active transfer of Sales Order Data
    Under here, look for any assignments of Condition Types to Value Fields and Quantity Fields to COPA Value Fields (Qty.)
    If these are present, they must have been put there on purpose. You should NOT JUST GO AHEAD AND DELETE them. Check why these are there and then check why these are flowing into your COPA report.
    Normally COPA reports are defined by Record Type. If you used Record Type "F" in your reports, you should always get the proper PL report. However, if you assigned a combination of "F" and "A", you will find that your Order data is flowing into COPA along with the Billing data. So the third check point should be your report definition. Call up the form for the report you are running using transaction KE35 (Change Mode). Check the definition of the Sales quantity, etc. and look for any flows with Record Type "A". Since the form may be used by others, it is not a good idea to delete a form as it is. Copy the form into another and change the new one. Delete the "A" assignments and see if you get the correct result.
    Broadly these are the areas you need to check. But COPA is vast and there could be other areas as well (e.g., KEDR Derivations, or some custom programs (SMOD)) which can trigger flows to COPA Value Fields.
    Cheers.

Maybe you are looking for