Delivery updation using IDOC_INPUT_DELVRY
Hi friends,
I'm working on an Inbound processing by extending an IDOC with one custom segment added. Now i have to mapp this custion segment and fields by finding an user-exit. Can any onew tell me wht are the user-exits can be used for this development.
Thanks& Regards,
Naren.
Hi Matt,
Thanks for u r help. Still i haev a doubt only with this single exit the custom sgment updation and field mapping and the data updation can be done or do i need to use one more exit in the delivery_update perform. Plz do clarify.
Thanks,
Naren.
Similar Messages
-
Hi,
I am trying to change delivery quantity using BAPI_OUTB_DELIVERY_CHANGE. When I tested the BAPI by giving values in the parameters
HEADER_DATA, DELIVERY, ITEM_DATA and ITEM_CONTROL it is working fine.
However when I use the same BAPI in program and when I am trying to test it I am receiving error 'E/VL/280' (
Required field in interface to delivery update missing &1 &2 &3 &4).
Request to please help me out on how to resolve.
Much Appreciated.Hi Nagarjuna,
Can you please check the program in debugging mode, &1 &2 &3 &4 are the place holders specifies some information. Might be missing some information while changing delivery document.
Check the place holders in debugging mode.
Thanks,
Ashok. -
Delivery Updation Failes using BAPI_OUTB_DELIVERY_CONFIRM_DEC
I am trying to update teh delivery using
'BAPI_OUTB_DELIVERY_CONFIRM_DEC'.
Inside the BAPI,
CALL CUSTOMER-FUNCTION '004'
TABLES EXTENSION1 = EXTENSION1
EXTENSION2 = EXTENSION2
CT_VBPOK = GT_VBPOK
CT_VERKO = GT_VERKO
CT_VERPO = GT_VERPO
CT_VBSUPCON = GT_VBSUPCON
CHANGING CS_VBKOK = GS_VBKOK.
is called.
In the custom code inside the user exit, I am updating CT_VBPOK = GT_VBPOK [Fields SONUM and SOBKZ].
The delivery updation for these fields failed.
Please provide me a best solution to accomplish my task.
Thanks in Advance,
Warm Regards,
Baburaj
Reqard Points Guarnteed.Hi Junwen,
Did you call the BAPI_TRANSACTION_COMMIT afterwards?
Before this the data is not saved. After that it is saved.
Regards,
Rob. -
Document Flow not updated using BAPI_GOODSMVT_CREATE
Hi Experts,
I am using BAPI_GOODSMVT_CREATE for doing PGR of an inbound delivery.
Material Document(mblnr) is getting populated but Document Flow of that inbound delivery is not getting updated.Its status is Open.
Can anyone knows how Document Flow can be updated using BAPI_GOODSMVT_CREATE??
Regards,
Puja.Hello Puja,
Goto transaction SPRO, Go to Logistics Execution - Shipping - Basic shipping Functions - Configure Clobal Shipping Data, In this put a tick on Document Flow Update.
Also refer to the below OSS note.
http://service.sap.com/sap/support/notes/199703
Regards,
Thanga -
LIKP table updation using the IDOC_INPUT_DESADV1
Hi,
Please help me when and where the LIKP table is updating using the FM IDOC_INPUT_DESADV1. I debugged the program several times even though i couldnt able to find the updation part.
Further to the above wherer exactly the idoc number is generrating in this FM.
This is very urgent.Kindly give the replies at the earliest.Ubay
Refer to this code in IDOC function module DOC_INPUT_DESADV1. Delivery order must be getting created thorugh this function module.
CALL FUNCTION 'GN_DELIVERY_CREATE'
EXPORTING
VBSK_I = S_VBSK
NO_COMMIT = TRUE
IF_SYNCHRON = ' ' "INS_HP_338221
IF_NO_DEQUE = 'X' "n_632020
IMPORTING
VBSK_E = S_VBSK
TABLES
XKOMDLGN = T_DLGN
XVBFS = T_VBFS
XVBLS = T_VBLS
XVERKO = T_VSEK
XVERPO = T_VSEP
IT_GN_HUSERNR = T_HUSN
IT_GN_SERNR = T_SERN
EXCEPTIONS
ERROR_MESSAGE = 1
OTHERS = 2.
Thanks
Amol G. Lohade -
To use IDOC_INPUT_DELVRY
Hi friends,
I am trying to use IDOC_INPUT_DELVRY FM . Can anyone tell me what are the paramaeters I need to import and export . i am executing the function module ? It is asking for INPUT_METHOD and MASS_PROCESSING . Can you tell me what should I pass in these two parameters ?Hi Gaurab,
IDOC_INPUT_DELVRY: This function module reads the data from the delivery idoc which is received from an external system and then create the delivery document in our system.
For information on the import parameters etc. plz visit www.se37.com and enter the FM name the site will then throw you all the information about that paticular FM.
Have A Nice Day
Chaitanya. -
How can delayed delivery update be configured for Inbound delivery ?
Hi All,
How can delayed delivery update be configured for Inbound delivery ?
There is setting for Outbound delivery delayed delivery update but how the same functionality be used for Inbound delivery?
Regards
JimmiHello Jimmi,
Unfortunately I must confirm that the Delayed delivery update is only available for outbound deliveries. Please see below note for further details
664316 Tips for the delayed delivery update for TO
I hope this information helps!
Martin -
Pod updation using function module
HI All,
Can any one say me how can we update the POD of a delivery By using the FM LE_POD_TVPOD_UPDATE. Please provide me what are all fields need to be filled so that we can update the LIKP and the TVpod table's.
Thanks and regards,
NareshHi,
If your are not sure which values to be passed.
Try to have a SELECT on this table and put into an Internal table then pass this respective table fields values to the FM parameters.
Or in SE37 run this FM first by considerieng one entry from the Table T706F and cehck the results. Then you will come to know wat values to be passed. then do the same in the program by calling this FM.
If you can cehck this Fm, all the parameters are referring to the T706F table only.
Thanks & Regards,
Chandralekha. -
Delivery Update BAPI in 5.0
Hi,
We are in ECC 5.0 and have the following requirement.
a. Receive loaded weight information from weight control system for a delivery.
b. Update the delivery with that weight information.
Identify if there is batch split on that line item and the number of batches allocated to that line item.
Check inventory for all those batches.
Allocate the weight (weight and qty are equal in our case) to the batches in ascending order of inventory.
Update delivery qty for each batch equal to that weight.
Update Picked quantity equal to that weight.
Update Text information for that line item with all the info that came from weighing system.
In 4.5b we were using BDC on VL02 to perform these updates and that is OK. Also we did not use batch split in 4.5b. Now we want to use batch split and make changes to this program to handle this.
Our issues now are:
1. We prefer to use BAPIs to update delivery with all the info as explained above (with batch split).
2. There seems to be no delivery bapi which updates text information .
3. Delivery update BAPI also does not support updating the PICK qty. (BAPI_OUTB_DELIVERY_CHANGE)
4. BDC for new transaction VL02N does not support updating of text information and SAP does not advise to use BDCs for new transactions.
5. SAP seems to advise continuation of old transaction VL02 (in BDC) for this kind of update.
Please advise if there are any other BAPI to achieve this functionality or are we missing some thing?
Thanks for your Help.
STRoberto,
Thanks for looking into this.
As I understand DELVRY03 is mainly for outbound. I will check to see if we have standard functionlaity to update batch split data using this IDOC.
Just to restate my problem, we already have a custom IDOC to receive the data.
Problem now is how to update that data into SAP in 5.0 using standard BAPI (with little bit of customisation if required).
With the currect IDOC we have we have our own logic to update delivery using BDC.
Thanks again for looking into this.
ST -
User Exit for Delivery Updating
Hi,
I am creating one user exit for delivery ,
My condition:
If XLIKP-UPDKZ (Update indicator) = Update (U).
Read table Deferred COGS Activity (Z1009) with key
Delivery Number eq LIKP-VBELN.
If sy-subrc <> 0
Exit.
Else.
If V50AGL-WARENAUSGANG=X (PGI is active)
Update table Z1009 with
WADAT_IST = XLIKP-WADAT_IST
PGI_ERNAM = SY-UNAME
PGI_ERDAT = SY-DATUM.
where Delivery Number (DL_NO) eq LIKP-VBELN.
If delivery updated successfully then no problem ,
if not updated then I need to through error message to log.
I need Function Module for this.
Can u help me.These ar all the User Exits used in VL01N.
Exit Name Description
V02V0001 Sales area determination for stock transport order
V02V0002 User exit for storage location determination
V02V0003 User exit for gate + matl staging area determination (headr)
V02V0004 User Exit for Staging Area Determination (Item)
V50PSTAT Delivery: Item Status Calculation
V50Q0001 Delivery Monitor: User Exits for Filling Display Fields
V50R0001 Collective processing for delivery creation
V50R0002 Collective processing for delivery creation
V50R0004 Calculation of Stock for POs for Shipping Due Date List
V50S0001 User Exits for Delivery Processing
V53C0001 Rough workload calculation in time per item
V53C0002 W&S: RWE enhancement - shipping material type/time slot
V53W0001 User exits for creating picking waves
VMDE0001 Shipping Interface: Error Handling - Inbound IDoc
VMDE0002 Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0003 Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0004 Shipping Interface: Message SDPACK (Packing, Inbound)
You can also look at BADI: LE_SHP_DELIVERY_PROC. It has several implementations which could be useful to you. -
How 2 creat report for displaying the details of a Delivery Document using
how to create report for displaying the details of a Delivery Document using the tables LIKP, LIPS
thank you
regards,
jagrut bharatkumar shukla
points will be rewardedHI
I AM GIVING YOU MY DELIVERY DOCUMENT CODE...MODIFY IT ACCORDING TO YOUR REQUIREMENT
*& Report ZDELIVERY *
report zdelivery message-id z9bhu .
types: begin of t_likp,
vbeln type likp-vbeln, "Delivery
erdat type likp-erdat, "Date for rec creation
* LFDAT TYPE LIKP-LFDAT, "Delevery Date
* WAERK TYPE LIKP-WAERK, "Currency
kunnr type likp-kunnr, "Ship-To Party
kunag type likp-kunag, "Sold-to party
traty type likp-traty, "Means-of-Transport
end of t_likp.
types: begin of t_lips,
vbeln type lips-vbeln, "Delivery
posnr type lips-posnr, "Delivery item
matnr type lips-matnr, "Material Number
arktx type lips-arktx, "Short Text for Sales Order Item
lfimg type lips-lfimg, "Actual quantity delivered
netpr type lips-netpr,
* MEINS TYPE LIPS-MEINS, "Base Unit of Measure
vgbel type lips-vgbel, "Doc no of the reference document
end of t_lips.
types: begin of t_vbpa,
vbeln type vbpa-vbeln, "SD DocumenT Number
posnr type vbpa-posnr, "Item number
parvw type vbpa-parvw, "Partner function
kunnrb type vbpa-kunnr, "Customer Number 1
end of t_vbpa.
types: begin of t_kna1,
kunnr type kna1-kunnr, "Customer Number 1
name1 type kna1-name1, "Name 1
ort01 type kna1-ort01, "City
adrnr type kna1-adrnr, "Address
end of t_kna1.
types: begin of t_li_vbpa,
vbeln type likp-vbeln, "Delivery
erdat type likp-erdat, "Date for rec creation
* LFDAT TYPE LIKP-LFDAT, "Delevery Date
* WAERK TYPE LIKP-WAERK, "Currency
kunnr type likp-kunnr, "Ship-To Party
kunag type likp-kunag, "Sold-to party
traty type likp-traty, "Means-of-Transport
vbeln1 type lips-vbeln, "Delivery
posnr type lips-posnr, "Delivery item
matnr type lips-matnr, "Material Number
arktx type lips-arktx, "Short Text for Sales Order Item
lfimg type lips-lfimg, "Actual quantity delivered
netpr type lips-netpr, "Net Price
* MEINS TYPE LIPS-MEINS, "Base Unit of Measure
vgbel type lips-vgbel, "Doc no of the reference document
vbeln3 type vbpa-vbeln, "SD DocumenT Number
parvw type vbpa-parvw, "Partner function
kunnrb type vbpa-kunnr, "Customer Number 1
end of t_li_vbpa.
types: begin of t_final,
vbeln type likp-vbeln, "Delivery
erdat type likp-erdat, "Date for rec creation
kunnr type likp-kunnr, "Ship-To Party
kunag type likp-kunag, "Sold-to party
traty type likp-traty, "Means-of-Transport
vbeln1 type lips-vbeln, "Delivery
posnr type lips-posnr, "Delivery item
matnr type lips-matnr, "Material Number
arktx type lips-arktx, "Short Text for Sales Order Item
lfimg type lips-lfimg, "Actual quantity delivered
netpr type lips-netpr, "Net Price
vgbel type lips-vgbel, "Doc no of the reference document
vbeln3 type vbpa-vbeln, "SD DocumenT Number
parvw type vbpa-parvw, "Partner function
kunnrb type vbpa-kunnr, "Customer Number 1
name1 type kna1-name1, "Name 1
ort01 type kna1-ort01, "City
adrnr1 type kna1-adrnr, "Address
name2 type kna1-name1, "Name 1
ort02 type kna1-ort01, "City
adrnr2 type kna1-adrnr, "Address
name3 type kna1-name1, "Name 1
ort03 type kna1-ort01, "City
adrnr3 type kna1-adrnr, "Address
end of t_final.
* D A T A D E C L A R A T I O N
*&*********Internal Table Declaration****************&*
data: it_likp type standard table of t_likp.
data: it_lips type standard table of t_lips.
data: it_vbpa type standard table of t_vbpa.
data: it_kna1 type standard table of t_kna1.
data: it_li_vbpa type standard table of t_li_vbpa.
data: it_li_vbpa_temp type standard table of t_li_vbpa.
data: it_final type standard table of t_final.
*&*********Work Area Declaration********************&*
data: wa_likp type t_likp.
data: wa_lips type t_lips.
data: wa_vbpa type t_vbpa.
data: wa_kna1 type t_kna1.
data: wa_li_vbpa type t_li_vbpa.
data: wa_li_vbpa_temp type t_li_vbpa.
data: wa_final type t_final.
*&*********Data Declaration************************&*
data: d_vbeln type likp-vbeln.
data: flag type i value 0.
* S E L E C T I O N S C R E E N D E C L A R A T I O N
selection-screen begin of block block2 with frame title text-001.
select-options: s_vbeln for d_vbeln obligatory. "Delivery no
selection-screen end of block block2.
* A T S E L E C T I O N - S C R E E N E V E N T S
*AT SELECTION-SCREEN.
*PERFORM VALIDATE_DATA.
* S T A R T O F S E L E C T I O N E V E N T S
start-of-selection.
perform fetch_data.
perform merge_data_kna1.
*INCLUDE Z9BT_SH_***4_FORMS.
call function 'OPEN_FORM'
exporting
* APPLICATION = 'TX'
* ARCHIVE_INDEX =
* ARCHIVE_PARAMS =
device = 'PRINTER'
* DIALOG = 'X'
* FORM = ' '
language = sy-langu
* OPTIONS =
* MAIL_SENDER =
* MAIL_RECIPIENT =
* MAIL_APPL_OBJECT =
* RAW_DATA_INTERFACE = '*'
* SPONUMIV =
* IMPORTING
* LANGUAGE =
* NEW_ARCHIVE_PARAMS =
* RESULT =
exceptions
canceled = 1
device = 2
form = 3
options = 4
unclosed = 5
mail_options = 6
archive_error = 7
invalid_fax_number = 8
more_params_needed_in_batch = 9
spool_error = 10
codepage = 11
others = 12
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
sort it_final by vbeln.
loop at it_final into wa_final.
call function 'START_FORM'
exporting
* ARCHIVE_INDEX =
form = 'Z9BT_DELIVERY'
language = sy-langu
* STARTPAGE = ' '
* PROGRAM = ' '
* MAIL_APPL_OBJECT =
* IMPORTING
* LANGUAGE =
exceptions
form = 1
format = 2
unended = 3
unopened = 4
unused = 5
spool_error = 6
codepage = 7
others = 8
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'WRITE_FORM'
exporting
element = 'ITEM_LIST'
function = 'SET'
type = 'BODY'
window = 'MAIN'
* IMPORTING
* PENDING_LINES =
* EXCEPTIONS
* ELEMENT = 1
* FUNCTION = 2
* TYPE = 3
* UNOPENED = 4
* UNSTARTED = 5
* WINDOW = 6
* BAD_PAGEFORMAT_FOR_PRINT = 7
* SPOOL_ERROR = 8
* CODEPAGE = 9
* OTHERS = 10
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'END_FORM'
* IMPORTING
* RESULT =
exceptions
unopened = 1
bad_pageformat_for_print = 2
spool_error = 3
codepage = 4
others = 5
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endloop.
call function 'CLOSE_FORM'
* IMPORTING
* RESULT =
* RDI_RESULT =
* TABLES
* OTFDATA =
exceptions
unopened = 1
bad_pageformat_for_print = 2
send_error = 3
spool_error = 4
codepage = 5
others = 6
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
*& Form VALIDATE_DATA
* text
* --> p1 text
* <-- p2 text
form validate_data .
select single vbeln into wa_likp-vbeln
from likp where vbeln in s_vbeln.
append wa_likp to it_likp.
if sy-subrc <> 0.
flag = 1.
endif.
endform. " VALIDATE_DATA
*& Form FETCH_DATA
* text
* --> p1 text
* <-- p2 text
form fetch_data .
select a~vbeln
a~erdat
a~kunnr
a~kunag
a~traty
b~vbeln
b~posnr
b~matnr
b~arktx
b~lfimg
b~netpr
b~vgbel
c~vbeln
c~parvw
c~kunnr
into table it_li_vbpa
from likp as a
left outer join lips as b on a~vbeln = b~vbeln
inner join vbpa as c on b~vgbel = c~vbeln
where a~vbeln in s_vbeln and
c~parvw = 'RE'.
endform. " FETCH_DATA
*& Form MERGE_DATA_KNA1
* text
* --> p1 text
* <-- p2 text
form merge_data_kna1 .
if it_li_vbpa[] is not initial.
it_li_vbpa_temp[] = it_li_vbpa[].
sort it_li_vbpa_temp by kunnr.
delete adjacent duplicates from it_li_vbpa_temp comparing kunnr.
loop at it_li_vbpa into wa_li_vbpa.
read table it_li_vbpa_temp into wa_li_vbpa_temp with key kunnr =
wa_li_vbpa-kunag.
if sy-subrc <> 0.
wa_li_vbpa_temp = wa_li_vbpa.
append wa_li_vbpa_temp to it_li_vbpa_temp.
endif.
read table it_li_vbpa_temp into wa_li_vbpa_temp with key kunnr =
wa_li_vbpa-kunnrb.
if sy-subrc <> 0.
wa_li_vbpa_temp = wa_li_vbpa.
append wa_li_vbpa_temp to it_li_vbpa_temp.
endif.
endloop.
endif.
if it_li_vbpa_temp[] is not initial.
select kunnr
name1
ort01
adrnr into table it_kna1 from kna1
for all entries in it_li_vbpa_temp
where kunnr = it_li_vbpa_temp-kunnr.
endif.
loop at it_li_vbpa into wa_li_vbpa .
wa_final-vbeln = wa_li_vbpa-vbeln.
wa_final-erdat = wa_li_vbpa-erdat.
*it_final-LFART = it_li_vbpa-LFART.
wa_final-kunnr = wa_li_vbpa-kunnr.
wa_final-kunag = wa_li_vbpa-kunag.
*it_final-VSTEL = it_li_vbpa-VSTEL.
wa_final-traty = wa_li_vbpa-traty.
wa_final-vbeln1 = wa_li_vbpa-vbeln.
wa_final-posnr = wa_li_vbpa-posnr.
wa_final-matnr = wa_li_vbpa-matnr.
wa_final-arktx = wa_li_vbpa-arktx.
wa_final-lfimg = wa_li_vbpa-lfimg.
wa_final-netpr = wa_li_vbpa-netpr.
*wa_final-GEWEI = it_li_vbpa-GEWEI.
*it_final-VOLUM = it_li_vbpa-VOLUM.
*it_final-VOLEH = it_li_vbpa-VOLEH.
wa_final-vgbel = wa_li_vbpa-vgbel.
wa_final-vbeln3 = wa_li_vbpa-vbeln.
*wa_final-PARVW = wa_li_vbpa-PARVW.
wa_final-kunnrb = wa_li_vbpa-kunnrb.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunnr.
if sy-subrc = 0.
wa_final-name1 = wa_kna1-name1.
wa_final-ort01 = wa_kna1-ort01.
wa_final-adrnr1 = wa_kna1-adrnr.
endif.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunag.
if sy-subrc = 0.
wa_final-name2 = wa_kna1-name1.
wa_final-ort02 = wa_kna1-ort01.
wa_final-adrnr2 = wa_kna1-adrnr.
endif.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunnrb.
if sy-subrc = 0.
wa_final-name3 = wa_kna1-name1.
wa_final-ort03 = wa_kna1-ort01.
wa_final-adrnr3 = wa_kna1-adrnr.
endif.
append wa_final to it_final.
clear wa_final.
endloop.
endform. -
Assign external delivery number using BAPI_DELIVERYPROCESSING_EXEC
Hi Experts,
How to assign the external delivery number using "BAPI_DELIVERYPROCESSING_EXEC?
For internal no, the BAPI works and I try to pass the parameters "tbl_request-EXTDELV_NO = XXX" to the BAPI , it prompt an error "Unexpected issue of error message (output NR 751)"
ThanksHi,
Please check the external number which you are giving is within the number Range defined in Configuration .
regards
Deepak. -
If you are attempting to update using a Mac or PC with which you do not normally sync
what happens when "If you are attempting to update using a Mac or PC with which you do not normally sync", & they say in step 2 or 3 in order not to loose your stuff "If you are updating your iOS device on a computer with which you do not normally sync , or if you disconnect your device before the sync process is complete, you may notice that some media content that was previously on your device is no longer there. You can restore this content by syncing with the Mac or PC with which you normally sync."
now what if the pc that was originally used to sync my ipod , has corrupt or bad systems files that are causing it from working correctly...? when i plug it in to the o.g. operating sysytems (win xp) it doesnt ever recognize or discover the ipod through itunes. the pc will pop up the "cameras been plugged in, what would you like to do...?" but nothing thru itunes. now if i reboot & run the windows 7 operating system w/itunes that has backed my ipod before & synced a few times as well, but not the o.g. op system used from the beginning (the very initial set up done on the ipod) it works fine, but DOES give me the warning "updating to 5.0 willdelete some of your apps & media, including ... ....will only preserve contacts, calenders," ....etc.
MY HUGE CONCERN IS if i do hit update & go through w/it, & not having been able to sync it to the one normally used to sync my ipod, will that back up i made be able to restore my game seetings, GAME SAVES, & data achievement type information....?
please, i'm very hesitant to go through w/it, so if you can please help me out here & let me know asap.....i canimagine you're all busy busy, so i thank you for your time here w/this
thank you
mike z
[email protected]Not that hard. One the computer you are using do the following:
- Transfer iTunes purchases.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
- Transfer other music using a third-party program like one of those discussed here.
Copy music
- If you have synced photos you need a paid program like TouchCopy or PhoneView
- When all the media in on the computer, connect the iPod to the computer and make a backup by right clicking on the iPod under Devices in iTunes and select Back Up
- Restore the iPod from that backup.
That computer is now your syncing computer. Note that the iPod backup that iTunes makes does not included synced media like apps or music. -
My husband bought an iPad 2. I have a Mac. ITunes is in my name but I have turned sharing on. When we updated to OS5 we lost all the free apps that he downloaded in his user name. Is there no way to update using my iTunes without losing his software. He is frustrated using the iPad because he never knows whether to use his user name or my user name.
Apps are only tied to one account... You can set up two iTunes accounts on your computer, however, and let his iPad sync to his account. If he has never backed up his apps to a computer, however, he will have to redownload all the apps. Afterwards, he can backup to iCloud instead of your computer.
http://support.apple.com/kb/ht1495 -
Creation of new internal delivery channel using AQ
Hi,
I wanted to route one of Trading partner data to a different queue.(no want to use existing queues - IP_IN /IP_OUT queue).
This needs to create a new delivery channel using AQ in B2B.
I have gone thru the steps & entered all entries, but I am not able to find any queues created in B2B schema.
Do I need to create a queue using PL/SL in B2B to make it available as internal delivery channel or this setup itself will create a queue in B2B?
PFA the entirs:
for transport parameters
- transport server (B2B server IP)
- Protocol as AQ
-URI - b2b.<uri_name> (name of Queue, wanted to create)
- Hostname
- Port
-SID - b2b
-consumer - b2buser
- receiptient - null
-Polling interval - 6000
Transport server details:
Host name - (IP)
IP - Host IP
username -
Pswd - for B2B schema
Any pointers will be a great help.
Regards,
MSAs mentioned by TH in the above post, first thing is to create the data type that is used for messages - IP_MESSAGE_TYPE. This data type will already be present in the B2B database and could be reused.
For a new data type you could do the following.
==============================================================
Create a new data type using the following
==============================================================
create type IP_MSG_TYPE as OBJECT (
MSG_ID VARCHAR2(128),
INREPLYTO_MSG_ID VARCHAR2(128),
FROM_PARTY VARCHAR2(512),
TO_PARTY VARCHAR2(512),
ACTION_NAME VARCHAR2(512),
DOCTYPE_NAME VARCHAR2(512),
DOCTYPE_REVISION VARCHAR2(512),
MSG_TYPE INT,
PAYLOAD CLOB,
ATTACHMENT BLOB
Once you have created a new Data type ( or are reusing the existing data type), you need to create Queue Table that will hold the Outbound and Inbound message queues. The existing Queue table is "IP_QTAB" which can again be reused.
For new Queue table you could do the following
==============================================================
Create a new Queue Table using the following
==============================================================
execute dbms_aqadm.create_queue_table ( queue_table => 'MY_QTAB',
queue_payload_type => 'IP_MSG_TYPE',
multiple_consumers => FALSE);
If you need to reuse the datatype change the queue_payload_type to 'IP_MESSAGE_TYPE'.
Once we have the Queue Table that will hold the queues, we need to add and start the queues that are to be used for the inbound and outbound messages.
==============================================================
Create the new Queues into the Queue Table using the following
==============================================================
execute dbms_aqadm.create_queue (queue_name => 'B2B.MY_OUT_QUEUE', queue_table => 'B2B.MY_QTAB');
execute dbms_aqadm.create_queue (queue_name => 'B2B.MY_IN_QUEUE', queue_table => 'B2B.MY_QTAB');
execute dbms_aqadm.start_queue(queue_name => 'B2B.MY_OUT_QUEUE', dequeue => TRUE, enqueue => TRUE);
execute dbms_aqadm.start_queue(queue_name => 'B2B.MY_IN_QUEUE', dequeue => TRUE, enqueue => TRUE);
If you are reusing the queue table IP_QTAB for creation of new queues, then reference that for the queue_table in above commands.
You need to reference the queue_name eg. B2B.My_OUT_QUEUE in the B2B UI screen.
Hope this helps.
AKT
Maybe you are looking for
-
Scheduling Agreement with Kanban
I was looking in to the forum and as per my understanding FRC and JIT schedule, On the days on which the next FRC date (1st. Monday in the month) or the next JIT date (Monday each week) is reached, scheduling agreements with the above profile setting
-
What's wrong with the audio in .avi exports?
I've been trying to export a 30-second flash animation to an .avi format, but it seems like regardless of the settings I choose, the audio comes out crackly. It's not even consistent. If I export it again with the exact same settings, it's crackly i
-
External speakers popping/clicking sounds on new 24" iMac 2,8 GHz
Hello everyone, got a new iMac from Gravis in Germany and connected it via it's headphone jack to my external stereo amplifier and it emits clicking or popping sounds whenever I switch the light in my room on or off. I've used the same connection for
-
Questions on handling two table controls on one screen.
Can some people please share some technology tips on handling two table controls on one screen . Thanks Moderator message - You'll find some cool tips if you search the forum or use Google first - post locked Edited by: Rob Burbank on Dec 7, 2009
-
Authorizing purchased music onto new computer
I have loaded my library onto a new mac and am wondering if there is a way to authorize all purchased songs at once rather than one at a time?