Dell S510 desktop mode?

Hi,
Does anyone know how to change the Dell S510 projected image so it can be used on a desk instead of being wall mounted? I have looked in the menu but can only fine Front or Rear projection settings.
Many Thanks

Basically it tells the web server that you're using Internet Explorer instead of a BlackBerry - very handy for some websites that insist on providing the mobile version when you want the whole shebang.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!

Similar Messages

Dell Dimension desktop sometimes won't communicate with my HP Photosmart 6510 wireless printer

At random times, when trying to print from Dell Dimension desktop to HP Photosmart 6510 wireless printer, I get a message that the computer can't communicate with the printer. The printer shows that it is connected to the Internet. I haven't changed any settings. Each time this happens, I unplug the printer and router, but it doesn't fix the problem. After about 20 minutes or so, it prints normally. It always happens at the most inopportune times. Any suggestions about how I can keep this from recurring?

These settings are for setting up your wireless printer to stay connected to your router, keeps wireless devices better connected and makes your router secure and hack proof.
1. Set a static IP in the printer (see step 6) outside the DHCP range of the router (check your manual).
2. Verify in the printer that 'Auto Off' is disabled. Use the Embedded Web Server (EWS) by going to the
    printers IP address in your browsers address bar, click Settings Tab/Auto Off. Or use the Printer
    Assistant, Printer Home Page (EWS).
In the router: (Refer to your router manual for information)
3. Use a fixed wireless channel like 1,6 or 11, never 'auto', try channel 1 first then the rest.
4. Set router to 20Mhz only, or 145Mbps depending on router.
5. Always use WPA2-AES (Personal) encryption, but you can try ‘mixed’ mode.
6. Disable WPS and never use it and disable UPnP for the routers security. Nobody can hack your
   system now and helps with wireless connectivity (if you want to know why, search the web).
7. If you have a dual band router (2.4Ghz and 5.0Ghz bands), make sure the SSID’s are NOT the same,
   they must be different for all bands, even for any Guest networks.
8. Save all settings. Power off both, wait 5 mins. Power on router wait 3 mins.
9. Power on printer and verify it reconnects to router.
Windows 7/8/8.1   Is Network Discovery on or off?
Control Panel\Network and Internet\Network and Sharing Center\Advanced sharing settings.
Under Home or Work (current profile) \ Network Discovery.
Select "Turn on network discovery" and save changes.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Laptop Charging In Desktop Mode

The power meter icon has been showing 51% (Plugged In, Not Charging) for the last few days that I've been running on the charger. I ran the battery test and it says the battery is in good shape (was replaced less than a year ago) and confirms the 51%. I want to get the battery to 100% so I don't have to be plugged in all the time while on travel. My Dell laptop has the option of running in desktop mode where the charging is controlled to extend the battery life when running in desktop mode (on the charger almost all the time). In this mode it seems to run between 85% and 100% charge, cycling only as needed. It also has the option to fully charge the battery. I can't find anything like this on this laptop. How can I get the battery to fully charge? Where do I find the settings to control the charging mode? Computer is a G62-143CL running Windows 7 Home Premium 64-bit.

I couldn't find a list of past HP updates in the Support Assistant. It did give access to Windows updates but not the HP drivers updates. Below is the line from the Update list for my computer. As I recall, there was a ? number 1425 associated with it. This was exactly the same identifiers as what was already in my computer. Lucky I decided to install it even if it was the same. HP Notebook System BIOS Update (Intel Processors) F.37 Rev. A 6.6 MB Oct 11, 2014 I would still like to get software like that on my Dell that lets me set up extended life and desktop charging modes since I still have two HP computers. Please also tell HP that having to install each driver separately rather than all at once is very annoying. I realize that some updates need reboots but surely a semi-talented software engineer could come up with the code to sort that out. They should buy a Dell computer to see how it should be done!

Extended Desktop Mode on iBook G4

I am trying to configure my iBook G4 to use extended desktop mode with a Dell M780 monitor. I currently have the Dell monitor mirroring the iBook display, but would like to have it in extended desktop mode.
OS X Help Viewer tells me to go to System Prefs > Displays > Arrangement, but when I go to the Displays section there are only two tabs: "Display" and "Color", and there are no other buttons, menus or anything related to arrangement.
My graphics card, which perhaps has something to do with this, is an ATI Mobility Radeon 9200. There are 32 MB total of VRAM. Core Image is not supported on either the iBook display or the Dell display.
iBook G4 (Model Name PowerBook6,5 Mac OS X (10.4.7) 1.07 GHz, 768MB Memory

Hi Mathew,
Welcome to the forum.
The iBooks do not support extended desktop. Should you wish to have this feature, you can with a third party solution. More details here:
http://www.rutemoeller.com/mp/ibook/ibook_e.html
Be aware, if your iBook is under warranty or you have AppleCare, this could be void if there is any damage caused as a direct result of applying the above. That said, a lot of people have done this without any issues. Infact I have yet to come across anyone who has had issues.
RD

Tablet PC calibration error in Adobe Photoshop and Illustrator CS3 whilst in Extended Desktop Mode

Hey everyone!
I've run into a snag which hasn't bugged me before because I never used a second monitor, but now that I do, Photoshop and Illustrator don't function properly.
I am running my Adobe products on my Lenovo X61 Thinkpad Tablet, which is Wacom PenEnabled. It's got the basic digitizer pen and pen pressure features, no stylus tilt or anything.
Whenever I run Photoshop or Illustrator in Extended Desktop Mode so I can have a different window open on my external monitor and the Adobe app on my tablet screen, my stylus goes strange. It seems to think that the extended desktop is part of the Adobe window, so when I move my stylus to draw, the cursor will appear on the external monitor, usually proportionate to the size of the screen...ie. It interprets the external and tablet screens as one desktop and the top left corner of my tablet screen is the top left of my external, whilst the bottom right on tablet IS the bottom right on tablet, if that makes any sense...sorry.
So I can't draw anything in photosho unless I set it back to standard desktop mode, or mirrored desktop. I've searched over the net and these forums and I can't find a fix for this. I was walking in harvey norman the other day and the Wacom Cintiq 12" was there on display, and it had the same issue with extended desktop and photoshop.
Has anyone had this issue before and/or does anyone know of a fix for it? I'll keep searching around and playing with the computer until I fix it and I'll post any solutions I find here if noone else has one.
My system details are:
Abobe Photoshop CS3 10.0.0
Adobe Illustrator CS3 13.0.0
OS: Windows Vista Build 6001, Service Pack 1, 32bit
RAM: 2GB
HD: 18.2GB free Disk Space (out of 66.3GB on the Active Partition)
Video: Intel GMA: Mobile Intel(R) 965 Express Chipset Family

I'm using an HP tx2011au tablet pc, using adobe flash cs3 and have the exact same problem. it becomes decalibrated only while the flash window is open, and only while flash has a file open, and only when using an extended desktop. even if flash is open and it has no files open it works fine.

Quicktime does not work in firefox 24 in windows 8 desktop mode

I am running Firefox 24 on Windows 8 Pro 64-bit in desktop mode. I have QuickTime Plug-in 7.7.4 installed. But when I try to go http://trailers.apple.com/trailers/ and play trailers all I get is black box and nothing is playing. No prompting to authorize a plugin, no error message, nothing. I tried to see if it will work with other browsers, so I tried Google Chrome. I went to the website, got prompted to authorize the plugin and then was able to play trailers without any problems. The page won't even render correctly under IE. So, it makes me conclude that it is a browser problem. Can you help me please? Thanks.

Is his in a normal tab or in a private tab?
Try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Windows 8 Desktop Mode Apps have no access to internet

I've seen a couple people ask questions about their browsers not working in desktop mode for Windows 8, and none of them were answered. I've got the same problem with mine, however it's any application that runs in desktop mode.
Problem: NO application running desktop mode has internet, games, browsers, chat programs...nothing.
History:
-Was running Windows 7 Ultimate and upgraded to Windows 8, choosing to migrate over all my applications files and personal settings.
-Metro style apps and browsers have no problems accessing the internet
Attempts:
-attempted to reset IE 10 Desktop mode to all default settings, clearing browser cache, SSL slate, and resetting to default.
-attempted to reinstall chrome.
-running CMD prompt in desktop mode, able to ping and use DNS as normal
-Windows 8 defender is disabled, running MS Forefront for AV.
-forcibly set my adapter DNS to a google dns 8.8.8.8
Any idea's what to try next?

hi there rebirth16 i had the exact same problem upgraded from windows 7 64bit to windows 8 pro and my desktop apps would not connect to the internet but the apps on metro did :-s. (strange) i upgraded with all my software and personal files intact im not
sure but some setting or some program caused the internet on the desktop to not connect. after a day of going through the pc my solution was to reinstal windows 8 but selected for it to just keep personal files i.e music pictures videos but not software after
that the finished the internet worked perfect well happy now down side you need to reintal your programs but this is the only way i could fix it.

I want to move a PSE 5 catalog and photos from an old Dell Dimension desktop to already installed PSE 13 on a new Dell XPS. Can it be done?

I want to move a PSE 5 catalog and photos from an old Dell Dimension desktop to already installed PSE 13 on a new Dell XPS8700. Can it be done? If so, how? Link to any clear cut instructions?

Hi,
You can visit Common catalog upgrade issues | Organizer | Elements 6 or later and see if it works.
You can also visit Converting a catalog from previous versions | Learn Photoshop Elements 11 | Adobe TV for visual help.
Regards
Kishan

Why does Digital Edition not work in desktop mode for WIndows 8?

I have installed the most recent version of JAVA and then downloaded and installed Digital Editions. I can open Digital Editions in desktop mode but when I select a book I cannot turn the page or move to a new page by any means. The only thing that seems to work is to select a new page and then toggle between full screen and partial.

I don't think ADE uses Java at all.
I run it in desktop mode in WIndows 8 and it reads books and turns pages fine: either using the left-right arrow keys,
or clicking on the forward/back buttons each side of the scrollbar at the bottom of the page.
There are lots of bugs in ADE2.0, and even though that isn't a bug for me it may be for you.
Try replacing ADE2.0 with the older but more reliable v1.7.2.
(You can have them both installed at once if you like.)
Version 1.7.2, it is a little difficult to find, available on Adobe site for Windows and for Mac.
http://helpx.adobe.com/digital-editions/kb/cant-install-digital-editions.html
The forum software is sometimes corrupting the link above. There shouldn't be a blank in 'editio ns.html'. The following redirects to the same page: http://tinyurl.com/diged172

Cs4 project loaded as desktop mode in cs5

Hello:
Just made the full upgrade yesterday from cs4 to cs5 on windows 7 from vista using the matrox with max. Loving the HD editing. I also tried to open an SD cs4 project in cs5. While opening, and after the message that tells you it is converting to cs5, I got this message - 'The editing mode used by this sequence could not be loaded. The sequence will be opened in desktop mode.' So the project opened, I created a new sequence with the matox settings and cut and pasted the original sequence into it. Any area that had to be rendered went pixelized. The only way I could get rid of this was to remove all colour correction, effects and transitions. When I reintroduced them, I ended up with the same result. I have found a work around, and that is opening a new project and importing the old cs4 project into it rather than just trying to open the cs4 project with cs5. Rather than using matrox settings, I just rerendered the sequence and it works fine, however, I don't have my program monitor which is controled through matrox. This will be the last of two SD projects, but wondered if anyone else had this issue.
Thanks, Christine

Yes, the Export function is the best that you will be able to do. There is usually forward compatibility between versions' Projects (though with a few pitfalls and failures), but there has never been backward compatibility. Closest that I have ever seen was some CS3 Encore Projects would Open in EncoreDVD 2.0, but that does not help you.
Good luck,
Hunt

IN Windows 8 Desktop Mode, Firefox continually puts a background window over a new window when a new window is opened.

I am running Firefox in Windows 8 in Desktop mode. If I have a window open, and then open a new window, the previously opened window will open in front of the window just opened. If there is more than one window open when opening a new window, it is usually the most recently used window that opens in front of the new window, but not always. There can sometimes be a delay as well - I can begin to type in the new window, and the previously opened window will open again. I have tried various Option settings, but nothing seems to prevent this behavior. Occasionally, when I have several windows open at once, two or more windows may open on top of the freshly opened window.

'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "'Start in Safe Mode"''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

In windows 8 on mozilla how do i switch to desktop mode

I am trying to switch to desktop mode in the firefox browser. How do i do that

Please create a screenshot of the problem you're seeing by following the guide mentioned at [[How do I create a screenshot of my problem?]].
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem.

IE10 won't work in desktop mode

So I'm using an HP laptop. OS is Windows 8. I use Internet Explorer 10, and the IE app on the Windows 8 home screen works. But when using desktop mode, IE doesn't work. When I click on the IE tab, a window comes up but it never loads. I tried a couple
of things like restarting my computer, clicking out and back into IE, disabling add-ons, using the troubleshooter to detect problems in IE performance (no issues detected), and nothing worked. So I've been using the Windows 8 app version of
IE, but I prefer to just use it through desktop mode. Does anyone have any idea of what is wrong and how to resolve the issue?
Thanks in advance.

starting IE in the NoHome state and then getting out of it.
What did you see then? It should have opened a res://ieframe.dll/NavCancl.htm page.
You could run ProcMon to see what is going on. It would be best to have two traces of this scenario, one working and whatever it is that you are getting. Typically your case is found to be something else that you have forgotten about that would
be interfering. Broken Family Safety is one example but I also saw it caused by the Java updater, so it could be just about anything. Using the suggested diagnostic should keep your traces as compact as possible.
You could also try simulating the same scenario in a safe mode boot. Unfortunately we cannot use ProcMon in that environment but you could at least use SysInternalSuite's AutoRuns to compare what is being loaded in each case.
Good luck
Robert Aldwinckle

Using extended desktop mode with ThinkPad x220

I have an Acer AL2216W external monitor. It has a resolution of 1680 x 1050
http://support.acer.com/acerpanam/monitor/0000/Acer/AL2216W/AL2216Wsp2.shtml
When I use extended desktop mode with the external monitor set as the primary display, everything scales properly on both the external and internal monitor.
However, if I set the internal monitor as the primary display, the external display does not fill the screen (there is a big black border around the desktop).
In both cases, the resolution setting for the external monitor is 1680 x 1050.
Is this normal behaviour?
Solved!
Go to Solution.

Hello,
That's how Windows behaves. Supposedly Realtime Soft Ltd.'s UltraMon gives you more precise control over wallpaper under Windows, but I have not used it myself.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Screensaver eMac monitor while in extended desktop mode?

Officially, eMacs can mirror to an external display but cannot do extended desktop. Since my 2005 eMac's built-in monitor is only functioning correctly at low resolutions (see http://discussions.apple.com/thread.jspa?threadID=2013835), I'm using a program called Screen Spanning Doctor to run it in extended desktop mode. My eMac is running Mac OS 10.4.11.
*I'm searching for a way to run a screensaver and/or turn off the eMac's built-in monitor while I continue to use my external monitor.* Is that possible? I've configured my external monitor to function as the primary display while the eMac's built-in monitor is the extended display.
Thanks!

Hi all,
I've found a solution to my problem!
I'd forgotten that Mac OS X allows each monitor in an extended desktop configuration to have its own desktop picture. I copied all desktop pictures to a new folder, used the procedure described at http://www.macworld.com/article/51937/2006/07/savedesk.html to copy all Apple screensaver photos to that new folder, and then configured System Preferences => Desktop & Screen Saver => Desktop to use that new folder and change the picture every five seconds. EDIT: I selected "Random order" too.
This won't be too distracting since I'm using an external monitor as my primary display. Also, this solution should require only a tiny percentage of my computer's resources. Thanks again to all of you for your great ideas!
Message was edited by: gobbles414 (original)

Dell S510 desktop mode?

Similar Messages

Maybe you are looking for