Delta data upliad problem

Hi,
I am facing problem delta data uploading. Following steps as follows which I have done :
1. First I have upload the data with Initialize delta process ( Initialization with Data transfer )
It was working fine and uploaded data to ODS.
2. Send I have upload the data with delta update option.
It is working but no data is being uploaded.
In customize data source I have selected delta specific field CPU_DT( Date field ).
Can any one help me what I have done mistake.
Thanks in advance,
Regards,
Goutam

HI,
Possibly you must have done the Init with Data transfer.....so all the records available has come to BI system.....now again you are running the delta.....but there is no changed or new records available in source system.....that why it must be coming with 0 records........
You can manually change the records in base table or add some new records....then execute the delta.... you will get some records in BI.....................
The other option to check your delta functionality is to delate all the data and also delete the Init.....................
Now you again run the IP with Init and without data transfer...............in this case it will enable the next load for delta .....now you run the delta IP........it should get the records in BI.....
Thanks
Mayank

Similar Messages

ODS to InfoCube delta data load problem........?

Hi
i have a problem here from ODS to InfoCube delta load. In Process Chain,
the process loading has failed from ODS to InfoCube yesterday. so the QM status for the yesterday's ods is red. so activation also failed for today & yesterday.
now i want to load for today's & yesterday's data to Cube.
Please let me know how can i solve this without missing any data.
Regards
swetha

Swatha
First Delete the incorrect "Red" Requests from infocube .
then, Goto infopackge and schedule the load again , The system will ask you for "Repeat Delta " , Click "Yes" . This procedure will update the failed requests along with further delta records to your cube .
Howevr, if your INIT is deactivated; First Execute Initialize delta withour Data Transfer , and then execute delta
This should solve your problem
Priya

Data upload problem in delta update from 1st ODS to 2nd ODS

Dear Friends,
I am loading data from one ODS to another. The update mode was full upload. Sometime back an error occurred in activation of the first ODS. The error was: Full updates already available in ODS ,Cannot update init./delta. So currently daily records are pulled but not added i.e. transferred recs = 4000 but added recs = 0.
When I looked for a solution in SDN I found that using program RSSM_SET_REPAIR_FULL_FLAG for 2nd ODS will reset all full uploads to Repair Full Request which I have already done for 2nd ODS. Then initialize once and pull delta.
But problem is that I cannot set update mode to delta as I am pulling some 80,000 records in 2nd ODS from 1st ODS with around 14 lacs records daily based on some data-selection filters in infopkg. But do not see any parameters for data-selction in delta mode.
Please suggest.
Regards,
Amit Srivastava

Dear Sirs,
Due to this error in activation in 2nd ODS daily data upload is failing in 1st ODS.
To correct this I converted all full upload requests in 2nd ODS to Repair full requests.
But now when I scheduled the infopkg today with full upload again data was transferred but not added.
I know I cannot have init./ delta so what possibly can now be done in this scenario. Please help.
Regards,
Amit Srivastava

XEM - Unable to load the initial data or the variances(delta) data into sys

I am installing xEM 2.0 SP 10 (SAP xApp Emissions Management) in a windows environment with SQL 5000. I installed xEM on NW 2004, usage types AS Java and EP 6.
I am attempting to load the initial data or the variances (delta) data into the system. Instruction is on page 15 in the install guide.
I am supposed to enter the following in the command line:
java -Djava.ext.dirs=. -jar SAPtrans.jar import logfile=import.log datafile=init.dat connectstring=[JDBC Driver];[JDBCUrl];[User];[Password]
Example command for import into SQL Server:
java -Djava.ext.dirs=. -jar SAPtrans.jar import logfile=import.log datafile=init.dat connectstring=com.ddtek.jdbc.sqlserver.SQLServerDriver; jdbc:datadirect:sqlserver://vma03:1433;SAPC11DB;password
The customer I am with is running the xEM database on a different instance. This is where I run into a problem. I am not sure how to specify the instance in the script. This is what I have attempted so far:
C:\>cd temp\load
C:\Temp\load>java -Djava.ext.dirs=. -jar SAPtrans.jar import logfile=import.log datafile=init.dat connectstring=com.ddte
k.jdbc.sqlserver.SQLServerDriver;jdbc:datadirect:sqlserver://PRODSQL43:SQL3:1534;SAPPEMDB;password
java.lang.Exception: ERROR: Cannot connect to the database:ERROR: Connect failed to database jdbc:datadirect:sqlserver:/
/PRODSQL43:SQL3:1534 as user SAPPEMDB (java.sql.SQLException/[DataDirect][SQLServer JDBC Driver]Unable to connect. Inva
lid URL.): [DataDirect][SQLServer JDBC Driver]Unable to connect. Invalid URL.
        at com.sap.sdm.util.dbaccess.DBTask.dbImport(DBTask.java:356)
        at com.sap.sdm.util.dbaccess.SapTransTask.perform_import(SapTransTask.java:293)
        at com.sap.sdm.util.dbaccess.SapTransTask.execute(SapTransTask.java:51)
        at com.sap.sdm.util.dbaccess.SapTrans.main(SapTrans.java:21)
import aborted with java.lang.Exception: ERROR: Cannot connect to the database:ERROR: Connect failed to database jdbc:da
tadirect:sqlserver://PRODSQL43:SQL3:1534 as user SAPPEMDB (java.sql.SQLException/[DataDirect][SQLServer JDBC Driver]Unab
le to connect. Invalid URL.): [DataDirect][SQLServer JDBC Driver]Unable to connect. Invalid URL.
C:\Temp\load>java -Djava.ext.dirs=. -jar SAPtrans.jar import logfile=import.log datafile=init.dat connectstring=com.ddte
k.jdbc.sqlserver.SQLServerDriver;jdbc:datadirect:sqlserver://PRODSQL43;SQL3:1534;SAPPEMDB;password
java.lang.Exception: ERROR: Cannot connect to the database:ERROR: Connect failed to database jdbc:datadirect:sqlserver:/
/PRODSQL43 as user SQL3:1534 (java.sql.SQLException/[DataDirect][SQLServer JDBC Driver]Error establishing socket. Connec
tion refused: connect): [DataDirect][SQLServer JDBC Driver]Error establishing socket. Connection refused: connect
        at com.sap.sdm.util.dbaccess.DBTask.dbImport(DBTask.java:356)
        at com.sap.sdm.util.dbaccess.SapTransTask.perform_import(SapTransTask.java:293)
        at com.sap.sdm.util.dbaccess.SapTransTask.execute(SapTransTask.java:51)
        at com.sap.sdm.util.dbaccess.SapTrans.main(SapTrans.java:21)
import aborted with java.lang.Exception: ERROR: Cannot connect to the database:ERROR: Connect failed to database jdbc:da
tadirect:sqlserver://PRODSQL43 as user SQL3:1534 (java.sql.SQLException/[DataDirect][SQLServer JDBC Driver]Error establi
shing socket. Connection refused: connect): [DataDirect][SQLServer JDBC Driver]Error establishing socket. Connection ref
used: connect
C:\Temp\load>java -Djava.ext.dirs=. -jar SAPtrans.jar import logfile=import.log datafile=init.dat connectstring=com.ddte
k.jdbc.sqlserver.SQLServerDriver;jdbc:datadirect:sqlserver://PRODSQL43:1534;SQL3;SAPPEMDB;password
java.lang.Exception: ERROR: Cannot connect to the database:ERROR: Connect failed to database jdbc:datadirect:sqlserver:/
/PRODSQL43:1534 as user SQL3 (java.sql.SQLException/[DataDirect][SQLServer JDBC Driver][SQLServer]Login failed for user
'SQL3'.): [DataDirect][SQLServer JDBC Driver][SQLServer]Login failed for user 'SQL3'.
        at com.sap.sdm.util.dbaccess.DBTask.dbImport(DBTask.java:356)
        at com.sap.sdm.util.dbaccess.SapTransTask.perform_import(SapTransTask.java:293)
        at com.sap.sdm.util.dbaccess.SapTransTask.execute(SapTransTask.java:51)
        at com.sap.sdm.util.dbaccess.SapTrans.main(SapTrans.java:21)
import aborted with java.lang.Exception: ERROR: Cannot connect to the database:ERROR: Connect failed to database jdbc:da
tadirect:sqlserver://PRODSQL43:1534 as user SQL3 (java.sql.SQLException/[DataDirect][SQLServer JDBC Driver][SQLServer]Lo
gin failed for user 'SQL3'.): [DataDirect][SQLServer JDBC Driver][SQLServer]Login failed for user 'SQL3'.
C:\Temp\load>java -Djava.ext.dirs=. -jar SAPtrans.jar import logfile=import.log datafile=init.dat connectstring=com.ddte
k.jdbc.sqlserver.SQLServerDriver;jdbc:datadirect:sqlserver://PRODSQL43:1534:SQL3;SAPPEMDB;password
java.lang.Exception: ERROR: Cannot connect to the database:ERROR: Connect failed to database jdbc:datadirect:sqlserver:/
/PRODSQL43:1534:SQL3 as user SAPPEMDB (java.sql.SQLException/[DataDirect][SQLServer JDBC Driver]Unable to connect. Inva
lid URL.): [DataDirect][SQLServer JDBC Driver]Unable to connect. Invalid URL.
        at com.sap.sdm.util.dbaccess.DBTask.dbImport(DBTask.java:356)
        at com.sap.sdm.util.dbaccess.SapTransTask.perform_import(SapTransTask.java:293)
        at com.sap.sdm.util.dbaccess.SapTransTask.execute(SapTransTask.java:51)
        at com.sap.sdm.util.dbaccess.SapTrans.main(SapTrans.java:21)
import aborted with java.lang.Exception: ERROR: Cannot connect to the database:ERROR: Connect failed to database jdbc:da
tadirect:sqlserver://PRODSQL43:1534:SQL3 as user SAPPEMDB (java.sql.SQLException/[DataDirect][SQLServer JDBC Driver]Unab
le to connect. Invalid URL.): [DataDirect][SQLServer JDBC Driver]Unable to connect. Invalid URL.
C:\Temp\load>
My last attempt was a command using colons and semicolons with the following results. The closest (there was a significant delay before the error or failure) appears to have been //PRODSQL43;SQL3:1534; (second attempt). The error listed from this attempt is   "Error establishing socket. Connection refused: connect".
I also checked the default database that user SAPPEMDB has in place and it is assign the correct database.
Please help.
Message was edited by: Owner
        Mike Smayrabunya

Hey,
It looks like one of the following:
1. The DB is down,
2. The user SAPPEMDB does not have the right authorization.
3. The password of the user SAPPEMDB is not password
4. The syntax is incorrect
in order to find what is the problem,
please:
1. Login in the the DB PRODSQL43:1534 with the user "SAPPEMDB" and the password "password",
this will eliminate the options 1 - DB down, 2 -SAPPEMDB does not have authorization and 3 - password of the user SAPPEMDB is not password.
2. If the login failed, than please run sql trace with security elements (in the client there is a tool called "SQL Profiler"
3. If the login is correct, than you check the syntax of the command:
"java -Djava.ext.dirs=. -jar SAPtrans.jar import logfile=import.log datafile=init.dat connectstring=com.ddtek.jdbc.sqlserver.SQLServerDriver; jdbc:datadirect:sqlserver://vma03:1433;SAPC11DB;password"
According to the error message "Error establishing socket. Connection refused"
it looks like The DB is down or syntax is incorrect.

Extractor not picking delta data

Hi All ,
I have a very peculiar problem with extractor 2LIS_02_SCN .
The Delta data's are not getting captured in BW as well as in the RSA3 .This is happening for few PO's .
I checked the extractor debugger as well (in RSA3) , but it shows only 1 record which is already there in BW , but the new delta data is not available in RSA3 as well .Deltas are running fine everyday . I also checked in the underlying table EKES for the Vendor Confirmations , I can see 2 records ie the previous as well as the changed records . Now my Problem is why the extractor is not pulling the new changed record . We have Update Mode in R/3 as Direct Delta
Note : There were no filling of set tables done since long time. set up tables are working fine .
Could anybody help me in this issue .
Thanks & Regards
Zeenath Syeda

Hi sidhartha,
SAP says :
<i>To improve performance, this DataSource contains no information about scheduling agreements. This also applies to returns items, service items, and limit items.</i>
So check whether your records(which are not extracted) are belongs to any one of above types.
With rgds,
Anil Kumar Sharma .P
Message was edited by: Anil Kumar Sharma

Data Mismatch problem in Production system

Dear Experts,
We have been encountering serious data mismatch problems with our source system since 29th Dec 2010.
We have realized this mismatch only on 11th Jan 2011. So, we have deleted entire data from 29th Dec 2010 onwards to 11th Jan 2011. Then we tried to load delta again as per our Process Chain sequence. Since then, our production system has become very inconsistent. We found that the entire data from 29th Dec 2010 to till date is started giving mismatch.
Our system got damaged in terms of data drastically. If I delete any bad requests from our Cubes & Data Store Objects, the next time when we try to load data, cube & Data Store Objects is showing the deleted request no. is not updated properly. Because of this, our Process chain is daily failing to complete and giving so many technical errors. We are totally confused to restore our data from 29th Dec 2010 to till date.
Can any one please help us to restore our data fully and Process Chain to run successfully...............?
Thanks in Advance,
Suman

Hi Suman,
I understood that you are using 3.x version of BW
such kind of issues occurs if you distrub the delta sequence by deleting the requests without making them red.
you can resolve this two ways......
1) Go to reconstruction tab of the DSO and CUBE, select all the req from 29th Dec 2010 thru 11th Jan 2011 and reconstruct them. once they appear in the request tab. make all the requests to red (set the QM status to RED) one by one and delete them from the CUBE and DSO.
This should set the delta status back to 29th and you will be able to run a repeat delta from then in your next delta.
2) Go to RSRQ and give the SID or the Request ID one by one that it is giving you ( request no. which is not updated properly)
Mke the QM status as RED for all of them.
Since you have already deleted them from the targets, just changing the QM status to RED will be sufficinet.
You have make the QM status to RED inorder to inform the system that the requset is incorrect one and has been deleted.
Once it is set to RED, system will not prompt any req and say "request no.# not updated properly".
i suggest you the second option.
Once you resume the delta load, it should run successfully.....and if you feel some data is still missing from 29th Dec 2010 thru 11th Jan 2011, just run a full repair load the get the data back.
If your Datasource is of LO extraction u may need to fill the setup tables to perform full repair.
Please let me know if the Datasource is of LO extraction. Also let me know once the issue is resolved.
Regards,
Sudheer.
Edited by: Sudheer Kumar Kurra on Jan 22, 2011 7:58 AM
Edited by: Sudheer Kumar Kurra on Jan 22, 2011 8:03 AM

Zero Record Data Load Problem

Hi,
Please give your suggestion for following problem.
we are loading data from ETL (Flat File - Data Stage) into SAP BW 3.1.
data may contain Zero records. When we try to push the data into BW. At ETL side, it is showing successful data transfer. At, BW side it is showing "Processing state" (Yellow light). and all BW resources are hang-up.
When we try to send another data load from ETL side, We could not push the data as BW resources are hang up by the previous process.
Whenever we are getting this kind of problem, we are killing the process and continuing with another data Re-load. But this is not a permanent solution. This is happening more often.
What is the solution for this problem?
One of my colleague suggested following suggestion. Shall I consider this one?
Summary: when loading with empty files, data may be in the processing state in BW
Details: When user load with empty file(must be empty, can not have any line returns, user can check the data file in binary mode), data is loaded into BW with 0 records. BW will show be in yellow state(processing state) with 0 record showing, and in the PSA inside BW, 1 datapacket will show there with nothing inside. Depends on how user configured their system, BW server can either accept the 0 record packet or deny it. When BW server is configured to accept it, this load request will change to green state(finished state). When the BW server is configured to deny it, this load request will be in the yellow state.
Please give me ur suggestions.
Thanks in advance.
Regards,
VPR

hi VPR,
have you tried to set the light 'judge'ment
go to monitor of one request and menu settings->evaluation of requests(traffic light), in next screen 'evaluation of requests', 'if no data is avaible in the system, the request' -> choose option 'is judged to be successful' (green).
Set delta load to complete when no delta data
hope this helps.

What happend to past delta data if we delete Delta INIT from Cube? safe ?

Hi Friends,
we have a cube where delta data is loaded daily from ODS.
So, cube have many delta requests and data is compressed.
Now have some problem and need to delete Delta INIT from this Cube and run fresh delta INIT again into Cube from ODS. Is that safe ?
If we do this...is there is any problem with past delta data availble in the Cube?
Please confirm..
Thanks
Tony

Hi,
I told you to check this before deleting the init as it very tough to manage it after that.
Now those delta request are missed and I dont think can be retrieved without doing a full repair with proper selection.
If you do a new init then there should be no request without a check for data mart status??
So you found it before deleting the init??Then you should not have deleted the init as I told earlier.
The only option is too reload the whole histroy again if you are not able to load it through selections in infopackage.
First do a selective deletion from the cube for the same selections and then schedule the full load for those selections from DSO.make sure these selections cover the whole scenario.
You cannot do anything else now to correct it.
If you data is not huge in cube then delete the whole data and reload it.
Schedule multiple loads from the DSO at the same time through different infopackages.
this will save time as weill will do the loads in quick time.
Thanks
Ajeet

ODS Delta Load --- Activation problem

Hi
I had an ODS, newly transported in to procuction. I did Initialization for that with out having any problem. But i am facing problem in the delta load. I can see that delta data load is successfull. But couldnot able to Activate the delta load request.
I can able to see following comments in cancelled job log.
Key value exists in duplicate (Not allowed by the ODS object type)
System error occurred (RFC
call)
Errors occured when carrying out activation
Can you please help me out why activation of delta request cancelling?
Thanks & Best Regards,
Venkata

hi..
for ur ODS..right click..go to change..in the settings..the checkbox for 'unique data records' must be ticked.
in dev..remove this checkbox and then save/activate the ODS.
transport this change to prod and then reload the data to the ODS in prod.
the delta request will surely load(and also activate) without any problem.
cheers,
Vishvesh
Message was edited by: Vishvesh

Data load problem with Sales Header and Item

Hi all,
The delta loads have failed, so I want to reload the delta again. I deleted the failed requests in data targets and then trying to reload the data. I am getting a message saying
Last delta update is not yet completed
Therefore, no new delta update is possible.You can start the request again if the last delta request is red or green in the monitor (QM activity)
Is it in RSA7, that I have to make the delta red? Please let me know where I have to do this. The data is going to an ODS object.
thanks
Sabrina.

Hi Sabrina,
Hope you have sorted it out by now, as there are other responses as well. Assuming that you now know the cause of failure.
For the below message "If you set a 'red' delta upload to green,with the next request, BW sends a delta request to the source system and this delivers the next delta data.
The data from the 'red' delta load is then no longer available (even with a repeat). This can lead to loss of data.Do you want to execute a QM Action?" -- Say OK and and set the QM status to red (status not ok) and when prompted for activation of M records, say "no" (as indicated in my previous post).
However, to be able to load this request from PSA you need to have this request in PSA (depending on the processing options), so goto RSA1> Modeling> PSA--> find your request under the relevant application component, and right click -->start the update immediately.
Hope it helps,
Sree

Full and delta Data loads in SAP BI 7.0

Hi,
Kindly explain me the difference between full and delta data loads in cube and DSO.
When do we select change log or active table(with or without archive) with full/delta in DTP for DSO.
Please explain the differences in data load for above different combinations.
With thanks and regards,
Mukul

Please search the forums. This topic has already been discussed a lot of times.

Date popup problem in APEX 3.1

Hi
I have a date picker (DD-MM-YYYY HH24:MI) and after upgrading to APEX 3.1 from APEX 3.0.1 the popup window height is too small.
The end user is having to resize the window to click on the OK button.
Is there a file I can edit to increase the height, couldnt find it in templates/themes.
Regards
Adam

Hi Adam,
This is a bug in APEX 3.1. It was discussed here:
Apex 3.1 Upgrade Issue - dba_lock and date picker display
and here:
Date Picker problem in Apex 3.1
I'll let Carl investigate and provide an official response and recommendation. Although I know where this problem is occurring.
The size of the popup calendar window is hard-wired in the file apex/images/javascript/apex_3_1.js. In APEX 3.0, the size of the popup window was determined programatically at runtime and was a function of the date format, if it included a time component or not.
The uncompressed, readable version of this same file is in apex/images/javascript/uncompressed/apex_3_1.js. Look for p_DatePicker and you'll see what I'm talking about. You'll see the height is hard-wired to 210 and width to 258. In APEX 3.0, the height was set to 255 if the date format contained a time component.
So my suggestion, until Carl provides an official response, is to look for '210' in apex/images/javascript/apex_3_1.js and change this to 255. Granted, all calendar popup windows will be this big, but it won't put as great a burden on the end-user.
I hope this helps.
Joel

ORA-01403: no data found Problem when using AUTOMATIC ROW FETCH to populate

ORA-01403: no data found Problem when using AUTOMATIC ROW FETCH to populate a form.
1) Created a FORM on EMP using the wizards. This creates an AUTOMATIC ROW FETCH
TABLE NAME - EMP
Item Containing PRIMARY KEY - P2099_EMPNO
Primary key column - EMPNO
By default the automatic fetch has a ‘Process Error Message’ of ‘Unable to fetch row.’
2) Created a HTML region. Within this region add
text item P2099_FIND_EMPNO
Button GET_EMP to submit
Branch Modified the conditional branch created during button creation to set P2099_EMPNO with &P2099_FIND_EMPNO.
If I then run the page, enter an existing employee number into P2099_EMPNO and press the GET_EMP button the form is populated correctly. But if I enter an employee that does not exist then I get the oracle error ORA-01403: no data found and no form displayed but a message at the top of the page ‘Action Processed’.I was expecting a blank form to be displayed with the message ‘Unable to fetch row.’
I can work around this by making the automated fetch conditional so that it checks the row exists first. Modify the Fetch row from EMP automated fetch so that it is conditional
EXIST (SQL query returns at least one row)
select 'x'
from EMP
where EMPNO = :P2099_EMPNO
But this means that when the employee exists I must be fetching from the DB twice, once for the condition and then again for the actual row fetch.
Rather than the above work around is there something I can change so I don’t get the Oracle error? I’m now wondering if the automatic row fetch is only supposed to be used when linking a report to a form and that I should be writing the fetch process manually. The reason I haven’t at the moment is I’m trying to stick with the automatic wizard generation as much as I can.
Any ideas?
Thanks Pete

Hi Mike,
I've tried doing that but it doesn't seem to make any difference. If I turn debug on it shows below.
0.05: Computation point: AFTER_HEADER
0.05: Processing point: AFTER_HEADER
0.05: ...Process "Fetch Row from EMP": DML_FETCH_ROW (AFTER_HEADER) F|#OWNER#:EMP:P2099_EMPNO:EMPNO
0.05: Show ERROR page...
0.05: Performing rollback...
0.05: Processing point: AFTER_ERROR_HEADER
I don't really wan't the error page, either nothing with the form not being populated or a message at the top of the page.
Thanks Pete

Delta data in open hub table

Hi All,
Can we store delta data in infospoke DB table.
I created a infospoke by exporting the data of cube in DB table. now i want to export the delta data of cube in the same table.
So Guru's please let me know is this possible in infospoke to store delta data either in file or table.
Thanks,
Ekka

Hi pradeep
You can store the delta using Info spokes in files.
Please go through the below articles
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0d48577-9542-2e10-05a1-d6c1e07ea641?QuickLink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20d6059d-f32c-2d10-90a4-f3c1009fb9a9?QuickLink=index&overridelayout=true
and check the below thread
Extraction mode Delta in Infospoke by using Multiprovider
Hope this helps
Regards,
Venkatesh
Edited by: Venky1903 on Jul 29, 2011 4:55 PM

Report 6i Arabic Date alignment problem in Windows 7

Hi
We have 6i Forms and Report and wanna run in windows 7. But we found arabic Date disaplay problem in reports. As you know arabic writting from right. But date display like 21/10/1431 and I wanna like 1431/10//21.
I tried from regional setting and change date format from report. but this is problem from system it self,
not accept right alignment. Even I install left to right patch (KB979643-x86).
Please Help
Thanks

Like others have said you need to run the bootcamp installer to install the drivers.
The time issue was a constant annoyance rebooting with OSX and my old XP bootcamp setup but it's gone with Windows 7 once you set your time to UTC format in the date and time properties instead of local time which OSX uses and XP couldn't support.

Delta data upliad problem

Similar Messages

Maybe you are looking for