Delta Timestamps in ECC when upgrading BW3 to BI7

Hi,
We are about to do a technical upgrade of our BW 3.1 system to BI 7.0. BW currently contains a large volume of CO-PA Sales and HR Payroll data that are managed through Delta extractions from ECC6.
When BW has upgraded to BI, can we realistically expect that Deltas will continue without any problems.
I understand that the CO-PA time/datestamp for deltas is stored in Table TKEBWTSN and that the HR Payroll time/datestamp for deltas is stored in Table hrms_bw.
Should we backup these tables before the upgrade, so that if the first delta extracts fails, it would be possible to rerun them after updating these tables.
Are there any other precautions that we could take? Unfortunately our development BI system is not set up for Deltas from an ECC source, so we are unable to properly test.
Any suggestions or feedback on managing Deltas during and postupgrade to BI7 would be greatly appreciated.
Regards
Leanne

Hello Leanne,  
See this [Best Practice for Upgrade NetWeaver 7.0BI |https://websmp110.sap-ag.de/~sapidb/011000358700000982302007E]
[SAP NetWeaver 7.0 Business Intelligence Upgrade Specifics|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10564d5c-cf00-2a10-7b87-c94e38267742]
SAP Note 424848 P18SDLInit sels in source sys lost after upgrade 1.2-2.0 (Applies to BI 7.x)
Note 955990 - BI in SAP NetWeaver 7.0: Incompatibilities with SAP BW 3.x
Note 853507 - Release Restr.: Usage Type BI of SAP NetWeaver 2004s
Please see this link for all [BI7.0 Related upgrade info|https://websmp110.sap-ag.de/upgrade-bi]
[Thanks|http://chandranonline.blogspot.com/]
[Chandran|http://chandranonline.blogspot.com/]

Similar Messages

  • SAP Query in ECC 6 Upgradation

    Hi All ,
    I am working in an ECC 6 Upgradation project , upgrading from 4.6 C to ECC 6.
    Somebody told me , Query cann't be coppied from 4.6 C to ECC 6.
    Is it true ? If so what is the alternative ?
    Thanks in advance.
    Regards
    Srikanta

    Hi Srikanta,
    U didnt need to re-copy all the queries. When you upgrade from 4.6, the new version of sap does not default to the correct query area. You merely need to point it to the correct one. Just set a parameter against you own user data called AQW and leave the parameter value blank.
    Take a look at OOS note 672784.
    You can transport queries between systems in SQ02 (by using the lorry button) or run report RSAQR3TR.
    You download the infosets, queries etc into a file and load them into whichever system you wish.
    Hope it will be useful.
    Regards,
    Lakshman.

  • Solution Manager ChaRM Issues when Upgrading Satellite System

    When upgrading a satellite system that is connected to Solution Manager's Change Request Management, is there anything that we need to be aware of?
    Will Change Documents still be able to go to completion (Production status) if we modify the landscape from the time the Change Document is In Development to the time it is moved to Production?
    1. Normal Correction (In Development)     Development (ECC 5.0) -> Quality (ECC 5.0) -> Production (ECC 5.0)
    2. Landscape is changed to                    Development (ECC 6.0) -> Quality (ECC 6.0) -> Production (ECC 5.0)
    3. Normal Correction moved to To Be Tested -> Consolidated -> Production
    Will the Normal Correction be in error because the landscape changed for the iBASE?
    Are there any other lessons learned that anyone has experienced with Change Request Management or Implementation during and after an upgrade?
    Thank You,
    Carlen
    Edited by: Carlen Yuen on Jan 13, 2009 1:50 AM
    Edited by: Carlen Yuen on Jan 13, 2009 1:51 AM

    Thanks Subhashini!
    We had issues updating the Task List in the past. After we update the landscape and refresh the project and update the Task List, do you foresee any other problems?
    Are there any additional items we should look out for? For example, we understand it is a requirement to release all transports prior to beginning the upgrade. However, since the release of the transport locks the change into the cycle for the next production move, this will present a problem if the change is not yet ready to be moved into Production. Do you have any further insight to any additional issues such as this?
    Thanks again!
    Carlen

  • BI data extraction setup when upgrading SAP version

    Hi,
    What are the steps to be followed with respect to the BI data extraction from SAP setup when upgrading from R/3 4.7 to ECC 6.0?
    Can anyone share any document that details the steps?
    Thanks,
    Sanjeev

    Hi,
    What is your BW system version?  I presume it is on a different box.
    BR/
    Mathew.

  • 4.6c to ECC 6 upgrade - Mass activation program RADMASG0

    During 4.6c to ECC 6 upgrade - when we try to use Mass activation program - RADMASG0 - how to remove warnings in a single shot ?
    When I am giving some 6 table names as input for activation (under 'DIRECT OBJECTS' in Program RADMASG0 ),after execution i am getting the warning for all the three programs. (same warnings)
    How to clear this.....whether i have to go one by one. If so then what is the use of this program ?
    regards,
    N. Prasanna kumar.

    Hi,
    What Message you are getting.
    One suggestion is that going one by one is most suitable.  Other wise  you will not able to detect the errors.
    With regards,
    Sumodh.P

  • New Development project  in the middle of  ECC EHP7 upgrade project

    Hi All,
    We are performing ECC EHP7 upgrade project in our project system landscape and i have already started Dev system upgrade.Suddenly our development team wants to perform new project  which required to install add-on product from third party application. Installing new add-on will require us to regenerate stack.xml file right? if that is the case  do we need to perform re upgrade to Dev right?. As per my knowledge this is not recommended to perform parallel project with upgrade project.
    Is there any  best practice or recommended method to perform multiple projects with upgrade project at the same time.
    Thanks,
    Raghu

    Hi Raghu,
    First here i would like to suggest you & your development team i.e during an upgrade project dual maintenance is required as per SUM guide,as per SUM guide you need to maintain parallel systems to perform regular activities, for same you could refer SUM guides and follow the standard procedures.
    Installing new add-on will require us to regenerate stack.xml file right?
    Yes you need to regenerate the stack.xml file .
    if that is the case  do we need to perform re upgrade to Dev right?
    If you are under upgrade phase no need to perform re upgrade,required add on can be installed after completion of an upgrade as per availability for EHP7.
    Try to avoid perform multiple projects with upgrade project .
    Regards,
    Gaurav

  • How to transfer data & apps,When upgrading from a iPhone 3G to an iPhone 4 or soon 5

    When upgrading from a iPhone 3G to an iPhone 4 or soon 5
    How to transfer all phone number and apps and notes, pretty much copy my old iPhone to my new iPhone , all content and apps.
    Will it transfer my text messages also?
    Is this a nightmare or an easy task?

    Connect to iTunes and backup. Then when you receive the new phone restore from that backup.
    http://support.apple.com/kb/ht1766
    http://support.apple.com/kb/ht1414

  • Access denied when upgrade SharePoint app in on premise deployment while it succeeds in fresh deployment

    We deployed a SharePoint hosted app then used it for a while then we needed to upgrade it to be provider hosted app.
    we used the same AppID and name with the new package then uploaded the package to the app catalog.
    the old app in the site contents now has a note that there is a newer version and prompts to upgrade.
    the upgrade fails with access denied even for site collection administrator.
    is there really some permission issue or the upgrade can't be done?
    We are volunteers, if the reply help you mark it as your answer. thanks!!

    Hi,
    According to your post, my understanding is that you got access denied error when upgrade the SharePoint hosted app to provider hosted app.
    How did you upgrade a SharePoint hosted app to a provider hosted app?
    They are two different type apps, why not just create a new provider hosted app?
    To create a provider hosted app, we should create a certificate that is used as “security token issuer”.
    There are two articles about creating provider hosted  high trust app, you can have a look at them.
    http://blog.karstein-consulting.com/2013/01/08/create-provider-hosted-high-trust-app-for-sharepoint-2013-short-guide/
    http://msdn.microsoft.com/en-us/library/fp179901.aspx
    What’s more, there is an topic about the troubleshooting tips for SharePoint high trust app, you can refer to it.
    http://blogs.technet.com/b/speschka/archive/2012/11/01/more-troubleshooting-tips-for-high-trust-apps-on-sharepoint-2013.aspx
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • Error 3194 when upgrading to ios 7.

    I receive error 3194 when upgrading to ios7 on my iphone 4 ( and I really don't know if it is 4s or just 4).  I am working though the itunes softward on my home computer.  It seems I am stuck in something called recovery mode.  I have tried a variety of suggestions found on the web (e.g., editing a "host" file, checking firewalls and connectivity, etc.) to no avail.  Any suggestions?

    The iPhone was either previously jailbroken (the DFU restore should have fixed that) or it has a hardware error. I would vote for the latter.

  • Receiving a -43 error message when upgrading to ios5.

    How do you get past error code -43  when upgrading to ios5 on ms vista??

    The only solution that I've found was here
    http://gizmodo.com/5849160/the-complete-guide-to-updating-to-ios-5&rct=j&sa=X&ei =bnaWTrPYKYekmQXR9_WFAg&sqi=2&ved=0CCoQ-AsoADAA&q=iphone+ios+5+error+-43+when+ba ckup&usg=AFQjCNGGVjsr_rky-tiplqdj-1fBfXofPA
    and here
    http://www.macworld.com/article/162925/2011/10/how_to_upgrade_your_ios_device_to _ios_5.html&rct=j&sa=X&ei=bnaWTrPYKYekmQXR9_WFAg&sqi=2&ved=0CC4Q-AsoATAA&q=iphon e+ios+5+error+-43+when+backup&usg=AFQjCNEBBPx-ymDJPGPd-sBy8TZ1dDTbeQ
    by:
    1. Doing backup.
    2. Using the Restore button and following the
    All works fine now and all the settings are there.
    BTW: it took over 2 hours to restre and that is with lots of apps and without songs, phothos and movies... that I removed before.Gizmo link above.

  • Why don't the ratings transfer when upgrading Lightroom to a new version? I no longer can sort using ratings--which took a lot of time to create.

    I have given many of my photos ratings, but the ratings don't come over when upgrading Lightroom to the newest version. Anything I can do to recreate my ratings?

    Press CTRL+SHIFT+DEL, change the top option to '''Everything '''and in the bottom menu, checkmark '''Cache '''(uncheck all the others). Then click '''Clear Now'''.
    Then go to '''Tools''' | '''Options '''| '''Advanced '''and in the Network tab | Offline Storage menu, click '''Clear Now'''.
    Then go to '''Tools '''| '''Options '''| '''Privacy''', click '''Show Cookies '''button and delete the cookies for lumosity.com.
    Then try again.

  • Error in "tempInit" when upgrading Flash MX AS2 FLA to Flash CS6 AS3 FLA

    I experienced a compiler error in "tempInit" when upgrading an AS2 project to AS3.  "tempInit" is something internal to Flash Authoring, because it doesn't exist in my project and other people have gotten the same error.
    I've read about this problem, and everyone thought it was because of an instance with a bad name, such as one that includes spaces or equals a keyword or something like that, and people have shot down the idea that the problem is with the library symbol, but I'm convinced now that it's a corrupted library symbol.  Here's why:
    I had 8 instances of a particular movie clip on stage, each on a different frame.
    When I deleted the symbol from the library, the compiler error went away (but so did my stage instances).  So that simply tells me that the problem is with that particular clip (I originally had to delete each clip in my library one at a time and recompile to determine the offending clip), but that obviously didn't rule out the name problem since the stage instances get removed when I deleted the corresponding library symbol.  Still, I knew it couldn't be a name problem, because all instances had a valid name "mainidea".
    I ruled out the name problem by creating a new library symbol identical to the first (it's just a few text fields with a rectangle drawn around them).  Without changing the names of the existing instances on stage, I used the "swap" button to swap in the new library symbol.  The use count on the old one dropped to zero, and the use count on the new one went up to 8.  The compiler error was gone, and it only went away once the use count for the old symbol was zero.
    The old and new library symbols are identical as far as I can see.  Same child objects at the same positions, same textfield content, same child instance names, no ActionScript code, etc.  Since there was no discernible difference, I came to the conclusion that the original library symbols had somehow been corrupted under the hood, somewhere in the pipeline between opening an old Flash MX file and setting the flash player version to 11.4 and selecting AS3 as the script language.  Somewhere in that process, the Flash Authoring environment screwed something up.  Does anyone know anything about this problem?
    I have hundreds of files I need to upgrade, and that symbol was copied to each of them as they were created years ago, and I think I'm going to experience this problem with all of them.  It's time-consuming to duplicate the old symbol and replace all the instances for every single file, so I'm trying to find the source of the problem and a workaround to avoid it.

    It works, but slowly as if somer AS1 code is interpreted into
    very
    ineffective machine code by AS2 interpretor
    My question was if it is know which particular AS1 features
    have these
    problems in AS2
    "ggshow" <[email protected]>
    ÓÏÏÂÝÉÌ/ÓÏÏÂÝÉÌÁ
    × ÎÏ×ÏÓÔÑÈ
    ÓÌÅÄÕÀÝÅÅ:
    news:f17r79$efu$[email protected]..
    > some AS1 not working when the movie run in AS2...
    > if you want to publish it as AS2, then write it in AS2.
    >
    > * it is time to learn AS3
    >

  • Hard Drive warning when upgrading to Mountain Lion. 2 try and I was able to upgrade. Software update for IPhoto, had problems restarting. Do I need my hard drive checked

    Hard Drive warning when upgrading to Mountain Lion. 2nd try and I was able to upgrade. Software update for IPhoto, had problems restarting. Do I need my hard drive checked

    Yes.
    Choose Apple menu > Restart. Hold down the Command (⌘) and R keys as your computer restarts.
    When you see a white screen with an Apple logo in the middle, you can release the keys.
    Click Disk Utility, and then click Continue.
    In the list at the left, select the item you want to repair. (Be sure to select an item that’s indented to the right in the list, not an item at the far left.)
    Click First Aid.
    If Disk Utility tells you the disk is about to fail, back it up and replace it. You can’t repair it.
    Click Repair Disk.
    If Disk Utility reports that the disk appears to be OK or has been repaired, you’re done.
    Otherwise, you may need to do one of the following steps.
    If Disk Utility can’t repair your disk or it reports “The underlying task reported failure,” try to repair the disk or partition again. If that doesn’t work, back up as much of your data as possible, reformat the disk, reinstall Mac OS X, and then restore your backed-up data.
    If you continue to have problems with your disk, it may be physically damaged and need to be replaced

  • I lost my Visual Voicemail when upgrading to iphone 5. New phone was set up from itunes backup of iphone4 but my Mac tells me there is an iCloud back up of my phone prior to this date. Will my Vis Voicemail be on this and can I get it on my new phone?

    I lost my Visual Voicemail when upgrading to iphone 5. New phone was set up from itunes backup of iphone4 but my Mac tells me there is an iCloud back up of my phone prior to this date. Will my Vis Voicemail be on this and can I get it on my new phone?

    I see.  Apple's documentation on what is included in the iCloud backup doesn't explicitly say that it contains voicemails, but that doesn't mean it does not.  You would just have to try restoring the backup to find out. 
    To restore to your iCoud backup you have to start by erasing the phone.  Go to Settings>General>Reset and tap Erase All Content and Settings.  Then go through the setup screens on the phone and when given the option, choose Restore from iCloud backup.  You will then sign into your iCloud account, accept the terms and conditions, then choose the backup you wish to restore from.  To see an older backup, you may need to tap "Show older backups" (see image below).  Be sure your phone is connected to wifi and your charger as this may take some time to finish.
    If this does not recover your voicemails, you can check to see if you have an older iTunes backup that may contain them.  Available backups are shown in iTunes Preferences>Devices on the Backups list.
    If all else fails, you could try contacting your carrier.  Voicemail is a carrier feature and they may have an archive you could access.

  • What is the use of delta in BW side when we have delta in R/3

    Hi,
    what is the use of delta in BW side when we are already using delta in R/3 side?
    Like,
    Generic extraction:-
    with different delta extractions (Time stamp, Calendar day, Numeric pointer).
    Lo-Cockpit extraction with change log method.
    Co/Pa extraction with time stamp method.
    So from this delta activation first time full data will be loaded and after that only changed data will be loaded because of these deltas in R/3 side.
    So now my question is what is the exact use of delta in BW side with ODS/DSO because data already reached to BW with delta activation right.
    Can you please explain me what is the exact use of BW delta?
    Thanks in advance.
    Points to be added.
    Regards,
    Shyam.

    The purpose of Delta Queue is same in R/3 and BW.
    In BW, Delta Queue is used to capture changes made to objects within BW. (for Eg: BW Statastics)or Update data from one BW system to another BW system (if you have multiple BW systems).
    Message was edited by:
            Praveen Vujjini

Maybe you are looking for