Demand Note not yet cleared.Move-in cannot be done
Hi,
Could anybody please help me in rectifying this problem :
"Demand Note not yet cleared.Move-in cannot be done"
I am finding this error while doing Move-In process.
Thanks and Regards
Hello,
Please check the notes u have mentioned at ur connection object,premise and device location and check the Form group too.
And try to give this note at Move in....just check this once...
It may helpful
Regds,
Narendar Konakanchi
Similar Messages
-
I updated my iphone and restored, now it is not being activated as this cannot be done anywhere in India. the help desk at a store asked me to restore it but there isn't any restore button now!
A compatible SIM card would be from AT&T and would not work in India. It sounds as if your iPhone was hacked to unlock it and when you updated it, the hack was removed, thus relocking it to AT&T.
-
Redolog backup taken(-cds) but archive dir not yet cleared.
Hi all,
Yesterday i took redolog backup using brarchive command in my prod server.
brarchive -u / -c force -p initsid.sap -cds
But after completion backup the archive log directory is not yet cleaned as i did the backup
as copy_delete_save.
Size of archive dir is 100GB.
1)I want to take clean up the archive dir now.
2)Why the archive dir is not cleaned ?
3)should i schedule redolog backup daily?
4) In an average of 100 logs generating in a day of 16mb size, so what should be my redolog backup plan?
5)what are editing actions should i do in (initsid.sap) so that after redolog backup archive dir will be automatically
cleaned.
Thanks in Advance,
Prathap
+919940180084Hello,
The first thing you should do is to understand what you are doing.
You executed brarchive with a series of options but you do not have any idea of what you are doing.
therefore, your first stop is not the forum but the documentation.
I'll make easy for you. [http://help.sap.com/saphelp_nw73/helpdata/en/47/3172ce66932036e10000000a114a6b/frameset.htm]you have the relevant description for "cds"
Please,read it(and chek also the rest of the manual) and you will be able to
1.- understand what you are doing
2.- understand what you can do
3.- answer your questions (and even other question that you still have)
Another option is NOT doing your work and expect us to do it for you -
Orders05 .. Very Urgent..Not yet clear please answer
Hi guys, Please help me..
I need to send an IDOC outbound when ever a PO is changed or created..
Where and how can i find the exit..
My Functional guy has given me "IDOC_OUTPUT_ORDCHG" and "IDOC_OUTPUT_ORDERS" for change and create and EXIT "EXIT_SAPLEINM_011".. Is it correct..
Please tell me the flow what should be done..
And What should be done inorder to trigger the code I am going to write in the EXIT..(put a break point and how cal I come to that break point..)
REwards guaranteed..
regards,
nazeer
Message was edited by:
nazeer shaik
Message was edited by:
nazeer shaikHi,
u can test from the transaction code ME22N only.In the messages tab give the output type and the distribution medium as distribution-ale and then save it.
but i am in doubt as the userexit which u specifed is not correct user exit becoz it doesn't contain any data record information.So ask ur functional consultant for the correct one .I have done coding for order confirmation.It will just give u an idea how to populate the custom segments.Please have a look.
*& Include ZXVEDU02
**-- Data Declaration--
*-- Constant Declaration--
CONSTANTS: c_1(1) TYPE c VALUE '1',
c_langu LIKE t005t-spras VALUE 'E',
c_parvw LIKE vbpa-parvw VALUE 'RG',
c_e1edk01(7) TYPE c VALUE 'E1EDK01',
c_e1edk02(7) TYPE c VALUE 'E1EDK02',
c_e1edk17(7) TYPE c VALUE 'E1EDK17',
c_e1edka1(7) TYPE c VALUE 'E1EDKA1',
c_e1edk14(7) TYPE c VALUE 'E1EDK14',
c_004(3) TYPE c VALUE '004',
c_001(3) TYPE c VALUE '001',
c_002(3) TYPE c VALUE '002',
c_re(2) TYPE c VALUE 'RE',
c_we(2) TYPE c VALUE 'WE',
c_ag(2) TYPE c VALUE 'AG',
c_0010(4) TYPE c VALUE '0010',
c_zzdochdr(8) TYPE c VALUE 'ZZDOCHDR',
c_ze1edk02(8) TYPE c VALUE 'ZE1EDK02',
c_zze1edk17(9) TYPE c VALUE 'ZZE1EDK17',
c_zze1edka1(9) TYPE c VALUE 'ZZE1EDKA1',
c_pe(2) TYPE c VALUE 'PE',
c_y(1) TYPE c VALUE 'Y',
c_zze1email(9) TYPE c VALUE 'ZZE1EMAIL',
c_zzsalorg(8) TYPE c VALUE 'ZZSALORG',
c_zze1edp01(9) TYPE c VALUE 'ZZE1EDP01',
c_e1edp01(7) TYPE c VALUE 'E1EDP01'.
*-- Variables Declaration--
DATA: lv_vbeln LIKE vbak-vbeln,
lv_country LIKE t005t-landx,
lv_text1 LIKE t042z-text1,
lv_vzskz LIKE knb1-vzskz,
lv_inco LIKE tinct-bezei,
lv_cadnr LIKE akkp-cadnr,
lv_pernr LIKE pa0105-pernr,
lv_parvw LIKE tpar-parvw,
lv_adrnr LIKE tvko-adrnr,
lv_zinso LIKE t056z-zinso,
Begin of Mod-002
lv_stceg TYPE stceg.
End of Mod-002
Begin of MOD-003
lv_min_tol TYPE KWMENG,
lv_max_tol TYPE KWMENG.
End Of MOD-003
TYPES:BEGIN OF t_vbfa,
vbelv LIKE vbfa-vbeln,
erdat TYPE erdat,
END OF t_vbfa.
DATA: i_akkp TYPE akkp.
*-- WorkArea Declaration--
DATA : wa_zdochdr TYPE zzdochdr,
wa_ze1edk02 TYPE zze1edk02,
wa_ze1edk17 TYPE zze1edk17,
wa_zze1email TYPE zze1email,
wa_zzsalorg TYPE zzsalorg,
wa_zze1edp01 TYPE zze1edp01,
wa_e1edk02 TYPE e1edk02,
wa_e1edk17 TYPE e1edk17,
wa_e1edka1 TYPE e1edka1,
wa_e1edk01 TYPE e1edk01,
wa_e1edp01 TYPE e1edp01,
wa_adrc TYPE adrc,
wa_pa0105 TYPE pa0105,
wa_zze1edka1 TYPE zze1edka1,
wa_zzdochdr TYPE zzdochdr,
wa_vbfa TYPE t_vbfa,
wa_vbpa TYPE vbpa.
*-- Move data to ZZDOCHDR Segment--
CASE int_edidd-segnam.
WHEN c_e1edk01.
MOVE int_edidd-sdata TO wa_e1edk01.
*--Begin of MOD001+(Modification ID 001)--
*-- Filling of ZZSALORG segment--
SELECT SINGLE adrnr
FROM tvko
INTO lv_adrnr
WHERE vkorg EQ dxvbak-vkorg.
IF sy-subrc EQ 0.
SELECT SINGLE *
FROM adrc
INTO wa_adrc
WHERE addrnumber EQ lv_adrnr.
wa_zzsalorg-salorg = dxvbak-vkorg.
wa_zzsalorg-name1 = wa_adrc-name1.
wa_zzsalorg-name2 = wa_adrc-name2.
wa_zzsalorg-stras = wa_adrc-street.
wa_zzsalorg-telf1 = wa_adrc-tel_number.
wa_zzsalorg-telfx = wa_adrc-fax_number.
wa_zzsalorg-land1 = wa_adrc-country.
wa_zzsalorg-strs2 = wa_adrc-str_suppl1.
wa_zzsalorg-street2 = wa_adrc-str_suppl2.
wa_zzsalorg-street3 = wa_adrc-str_suppl3.
wa_zzsalorg-ort01 = wa_adrc-city1.
wa_zzsalorg-pstlz = wa_adrc-post_code1.
wa_zzsalorg-regio = wa_adrc-region.
int_edidd-segnam = c_zzsalorg.
CLEAR int_edidd-sdata.
MOVE wa_zzsalorg TO int_edidd-sdata.
APPEND int_edidd.
CLEAR: wa_adrc,
wa_zzsalorg.
ENDIF.
*--End of MOD001+(Modification ID 001)--
SELECT SINGLE text1
FROM t042z
INTO lv_text1
WHERE land1 EQ dxvbpa-land1
AND zlsch EQ dxvbkd-zlsch.
READ TABLE dxvbpa INTO wa_vbpa WITH KEY vbeln = dxvbpa-vbeln
parvw = c_parvw.
IF sy-subrc EQ 0.
Begin of Mod-002
SELECT SINGLE stceg
FROM kna1
INTO lv_stceg
WHERE kunnr = wa_vbpa-kunnr.
End of Mod-002
SELECT SINGLE vzskz
FROM knb1
INTO lv_vzskz
WHERE kunnr EQ wa_vbpa-kunnr
AND bukrs EQ dxvbak-bukrs_vf.
IF sy-subrc EQ 0.
SELECT SINGLE zinso
FROM t056z
INTO lv_zinso
WHERE vzskz EQ lv_vzskz
AND waers EQ wa_e1edk01-curcy.
wa_zzdochdr-zdoctitle = dobject-objky.
wa_zzdochdr-zdate = dobject-erdat.
wa_zzdochdr-zmestyp = dobject-kschl.
wa_zzdochdr-zmedium = dobject-nacha.
wa_zzdochdr-zlang = dobject-spras.
wa_zzdochdr-zttype = dxvbkd-kdkg1.
wa_zzdochdr-zpaymethod = dxvbkd-zlsch.
wa_zzdochdr-zpaytext = lv_text1.
wa_zzdochdr-zintonpymt = lv_zinso.
Begin of Mod-002
wa_zzdochdr-zstceg = lv_stceg.
End of Mod-002
int_edidd-segnam = c_zzdochdr.
CLEAR int_edidd-sdata.
MOVE wa_zzdochdr TO int_edidd-sdata.
APPEND int_edidd.
CLEAR : wa_zzdochdr.
ENDIF.
ENDIF.
*-- Move data to ZZE1EDK02 Segment--
WHEN c_e1edk02.
MOVE int_edidd-sdata TO wa_e1edk02.
IF wa_e1edk02-qualf EQ c_004.
SELECT SINGLE vbelv FROM vbfa INTO wa_vbfa
WHERE vbeln EQ lv_vbeln
AND vbtyp_v EQ 'B'.
IF sy-subrc EQ 0.
SELECT SINGLE erdat FROM vbak INTO wa_vbfa
WHERE vbeln EQ wa_vbfa-vbelv.
int_edidd-segnam = c_ze1edk02.
CLEAR int_edidd-sdata.
MOVE wa_vbfa TO int_edidd-sdata.
APPEND int_edidd.
CLEAR wa_vbfa.
ENDIF.
ENDIF. " IF ended for "IF wa_e1edk02-qualf = '004'" condition.
**-- Move data to ZZE1EDK17 Segment--
WHEN c_e1edk17.
MOVE int_edidd-sdata TO wa_e1edk17.
IF NOT dxvbkd-lcnum IS INITIAL.
SELECT SINGLE inco1
inco2
FROM akkp
INTO i_akkp
WHERE lcnum EQ dxvbkd-lcnum.
IF sy-subrc EQ 0.
IF wa_e1edk17-qualf EQ c_001.
wa_ze1edk17-lkond = i_akkp-inco1.
wa_ze1edk17-qualf = wa_e1edk17-qualf.
SELECT SINGLE bezei
FROM tinct
INTO lv_inco
WHERE spras EQ 'E'
AND inco1 EQ i_akkp-inco1.
IF sy-subrc EQ 0.
wa_ze1edk17-lktext = lv_inco.
ENDIF.
ELSEIF wa_e1edk17-qualf EQ c_002.
wa_ze1edk17-qualf = wa_e1edk17-qualf.
wa_ze1edk17-lktext = i_akkp-inco2.
ELSE.
ENDIF.
int_edidd-segnam = c_zze1edk17.
CLEAR int_edidd-sdata.
MOVE wa_ze1edk17 TO int_edidd-sdata.
APPEND int_edidd.
CLEAR wa_ze1edk17.
ENDIF.
ENDIF. " IF ended for not initial condition.
*--Move data to zze1edka1 Segment--
WHEN c_e1edka1.
MOVE int_edidd-sdata TO wa_e1edka1.
*--Checking the wa_e1edka1-parvw field for 'RE'--
IF wa_e1edka1-parvw EQ c_re.
IF NOT dxvbkd-lcnum IS INITIAL.
SELECT SINGLE cadnr
FROM akkp
INTO lv_cadnr
WHERE lcnum EQ dxvbkd-lcnum.
IF sy-subrc EQ 0.
SELECT SINGLE *
FROM adrc
INTO wa_adrc
WHERE addrnumber EQ lv_cadnr.
wa_zze1edka1-parvw = wa_e1edka1-parvw.
wa_zze1edka1-partn = wa_e1edka1-partn.
wa_zze1edka1-land1 = wa_adrc-country.
wa_zze1edka1-name1 = wa_adrc-name1.
wa_zze1edka1-name2 = wa_adrc-name2.
wa_zze1edka1-stras = wa_adrc-street.
wa_zze1edka1-strs2 = wa_adrc-str_suppl1.
wa_zze1edka1-ort01 = wa_adrc-city1.
wa_zze1edka1-pstlz = wa_adrc-post_code1.
wa_zze1edka1-regio = wa_adrc-region.
int_edidd-segnam = c_zze1edka1.
CLEAR int_edidd-sdata.
MOVE wa_zze1edka1 TO int_edidd-sdata.
APPEND int_edidd.
CLEAR: wa_adrc,
wa_zze1edka1.
ENDIF.
ENDIF.
ENDIF. " IF ended for "IF wa_e1edka1-parvw EQ 'RE'" condition.
*--Checking the wa_e1edka1-parvw field for 'WE'--
IF wa_e1edka1-parvw EQ c_we.
IF NOT dxvbkd-lcnum IS INITIAL.
SELECT SINGLE cadnr
FROM akkp
INTO lv_cadnr
WHERE lcnum EQ dxvbkd-lcnum.
IF sy-subrc EQ 0.
SELECT SINGLE *
FROM adrc
INTO wa_adrc
WHERE addrnumber EQ lv_cadnr.
wa_zze1edka1-parvw = wa_e1edka1-parvw.
wa_zze1edka1-partn = wa_e1edka1-partn.
wa_zze1edka1-land1 = wa_adrc-country.
wa_zze1edka1-name1 = wa_adrc-name1.
wa_zze1edka1-name2 = wa_adrc-name2.
wa_zze1edka1-stras = wa_adrc-street.
wa_zze1edka1-strs2 = wa_adrc-str_suppl1.
wa_zze1edka1-ort01 = wa_adrc-city1.
wa_zze1edka1-pstlz = wa_adrc-post_code1.
wa_zze1edka1-regio = wa_adrc-region.
int_edidd-segnam = c_zze1edka1.
CLEAR int_edidd-sdata.
MOVE wa_zze1edka1 TO int_edidd-sdata.
APPEND int_edidd.
CLEAR: wa_adrc,
wa_zze1edka1.
ENDIF.
ENDIF.
ENDIF. " IF ended for "IF wa_e1edka1-parvw EQ 'WE'" condition.
*--Checking the wa_e1edka1-parvw field for 'AG'--
IF wa_e1edka1-parvw EQ c_ag.
IF NOT dxvbkd-lcnum IS INITIAL.
SELECT SINGLE cadnr
FROM akkp
INTO lv_cadnr
WHERE lcnum EQ dxvbkd-lcnum.
IF sy-subrc EQ 0.
SELECT SINGLE *
FROM adrc
INTO wa_adrc
WHERE addrnumber EQ lv_cadnr.
wa_zze1edka1-parvw = wa_e1edka1-parvw.
wa_zze1edka1-partn = wa_e1edka1-partn.
wa_zze1edka1-land1 = wa_adrc-country.
wa_zze1edka1-name1 = wa_adrc-name1.
wa_zze1edka1-name2 = wa_adrc-name2.
wa_zze1edka1-stras = wa_adrc-street.
wa_zze1edka1-strs2 = wa_adrc-str_suppl1.
wa_zze1edka1-ort01 = wa_adrc-city1.
wa_zze1edka1-pstlz = wa_adrc-post_code1.
wa_zze1edka1-regio = wa_adrc-region.
int_edidd-segnam = c_zze1edka1.
CLEAR int_edidd-sdata.
MOVE wa_zze1edka1 TO int_edidd-sdata.
APPEND int_edidd.
CLEAR: wa_adrc,
wa_zze1edka1.
ENDIF.
ENDIF. " IF ended for "IF NOT dxvbkd-lcnum IS INITIAL" condition.
ENDIF. " IF ended for "IF wa_e1edka1-parvw EQ c_ag" condition.
*--Checking the wa_e1edka1-parvw field for 'Y'--
IF wa_e1edka1-parvw+0(1) EQ c_y.
SELECT SINGLE parvw
FROM tpar
INTO lv_parvw
WHERE parvw EQ wa_e1edka1-parvw
AND nrart EQ c_pe.
IF sy-subrc EQ 0.
SELECT SINGLE pernr
FROM vbpa
INTO lv_pernr
WHERE vbeln EQ dxvbpa-vbeln
AND parvw EQ lv_parvw.
IF sy-subrc EQ 0.
SELECT SINGLE usrid_long
FROM pa0105
INTO wa_pa0105-usrid_long
WHERE pernr EQ lv_pernr
AND usrty EQ c_0010. " communication type email
wa_zze1email-zparvw = wa_e1edka1-parvw.
wa_zze1email-zname = wa_e1edka1-name1.
wa_zze1email-zemail = wa_pa0105-usrid_long.
int_edidd-segnam = c_zze1email.
CLEAR int_edidd-sdata.
MOVE wa_zze1email TO int_edidd-sdata.
APPEND int_edidd.
CLEAR: wa_adrc,
wa_zze1email,
wa_pa0105.
ENDIF.
ENDIF.
ENDIF. " IF ended for "IF wa_e1edka1-parvw EQ 'Y'" condition.
*--Begin of MOD003 (Modification ID 003)--
*-- Move data to ZZE1EDP01 Segment--
WHEN c_e1edp01.
MOVE int_edidd-sdata TO wa_e1edp01.
wa_zze1edp01-posex = wa_e1edp01-posex.
wa_zze1edp01-uebto = dxvbap-kwmeng + ( dxvbap-kwmeng * dxvbap-uebto / 100 ).
wa_zze1edp01-untto = dxvbap-kwmeng - ( dxvbap-kwmeng * dxvbap-untto / 100 ).
wa_zze1edp01-uebto = dxvbap-uebto.
wa_zze1edp01-untto = dxvbap-untto.
int_edidd-segnam = c_zze1edp01.
CLEAR int_edidd-sdata.
MOVE wa_zze1edp01 TO int_edidd-sdata.
APPEND int_edidd.
CLEAR: wa_zze1edp01.
*--End of MOD003 (Modification ID 003)--
WHEN OTHERS.
ENDCASE.
get the correct exit and put breakpoint on it and as i told u can test from the transaction itself.
Regards,
Nagaraj -
is there anyway to cancel a purchase, has not been watched and is not yet downloaded?
You cannot call itunes support at all.
Ther is no telephone support for itunes support.
You can contact them via the support link and ask for an exception to the no refunds rule, but I would not expect it to happen. -
My instyle did not download clearly some pages are unreadable.
My Instyle mag download did not download clearly and I cannot read it.
Connect to the computer that you normally use for sync and do a sync.
-
I applied and received an upgrade code to Redeem Mountain Lion for my new MBP.
I get this message when I try to Sign in to the App Store after entering the redemption content code, and also if I just try to "Sign In". The first part of the error is true - I haven't used the AppleID with the iTunes store.
I received the upgrade code using this same AppleID, so I don't think I can use a different AppleID.
I also tried to re-create this appleID...(it was one suggestion I saw for this issue) It doesn't let me since the ID already exists...
The error is:
"This Apple ID has not yet been used with the iTunes Store. Please review your account information." I click "Review", next message "You must turn on cookies to continue. Cookies must be enabled if you want to create or edit.. etc."
It's clearly not a cookie issue.. Stuck...The first part of the error is true - I haven't used the AppleID with the iTunes store.
Try here > Using an existing Apple ID with the iTunes Store and Mac App Store
received the upgrade code using this same AppleID, so I don't think I can use a different AppleID.
Correct.
It's clearly not a cookie issue..
As for cookies. Quit the App Store. Now open the Finder. From the Finder menu bar click Go > Go to Folder.
Type this exactly as you see it here: ~/Library/Cookies
Click Go the move the com.apple.appstore.plist file from the Cookies folder to the Trash.
Relaunch the App Store. -
Cannot sync photos "iPhoto library is not yet available"
When syncing iPhone 5s to iMac running Yosemite and get the following error:
"iTunes cannot sync photos to the iPhone "iPhone" because your iPhoto library is not yet available. Please try again later."
This phone has been syncing with iPhoto for some time now. This is a new one to me.
Tried rebooting the phone and the desktop machine, same result.
Interestingly, in iTunes when selecting the "photos" page all I get is the spinning circle for the iPhone, the other selections, Summary, Apps, etc., all load fine.
The same situation is true for the iPad mini, the photo page never loads. I have not attempted to sync the iPad since this error appeared.
Anyone familiar with this error?
This mac has had the "iPod" cache folder deleted in past months to clear another sync error, but had been syncing fine since then.
iTunes version 12.1.050
Thanks!
Cross posted following no replies on iTunes community.@CookieDuster
We going to run a test and see if if this solution works. Lets try
On your super cool imac:
go to system preferences>users & group>create a new account and name it test (make sure you set it as an admin account)
get an external hd and plug it in
next go to finder>pictures>and copy iphoto library that is located there and put in the external hd
now log into the test account
transfer the iphoto library from external to pictures folder. if you see the same file there, do not worry you are just overwriting it.
once that complete, I would like for you to test your iphone and see if it syncs over.
Thanks! -
ITunes cannot sync photos to the iPhone because your iPhoto Library is not yet available.
I've turned my iPhone 4 into a iPod, meaning I only use it to hold music for my workouts. Ever since I've upgraded to Yosmite I can't sync my iPhone 4 to iTunes anymore. I can back it up, but I can't sync. Each time it tells me "iTunes cannot sync photos to the iPhone because your iPhoto Library is not yet available" I don't want to sync any photos, just music.
I've tried to repair my iPhoto Library, restarted my Mac, restarted my iPhone 4 but I still get his error message.
In iTunes when I select my iPhone 4 > Photos, I just get a spinning wheel.
Any thoughts??I can't follow the first link since I just get a spinning wheel for photos.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then take an action that isn't working the way you expect. Select any lines that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name or email address, may appear in the log. Anonymize before posting.
When you post the log extract, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the text on Pastebin, then post a link here to the page you created. -
I have a 27" desktop mac running with OSX 10.6.8. The bluetooth keyboard started not typing when some of the keys are pressed. Plugged in a wired keyboard, started doing the same thing. When opening up a browser or application, the cursor moves but cannot select anything. Suggestions?
Maybe something in these Apple support articles will help.
Keyboard Doesn’t Work
Keyboard Keys Do Not Respond
Keyboard/Mouse – Troubleshooting Wireless -
Firefox 4.0 b 5 - was doing an update but gave this error message: The operation cannot be completed because of an internal failure. A secure network communication has not been cleared up correctly. - only option = OK
This is a known bug and it is being worked on.
The relevant bug report is [https://bugzilla.mozilla.org/show_bug.cgi?id=588511 Bug 588511], but please do not comment on the bug report. -
when I connect my iphone to the iTunes, it said "Apple Mobile Device" service not yet activated, service cannot start?
What does it mean? I connect my iphone to iTunes everynight, only tonight this message pop out?You can try to start the AMDS by going to task manager (ctrl/alt/delete), Choose the services tab and right click on the AMDS and choose start service. This will sometimes work, but usually iTunues needs to be reinstalled. If you reinstall iTunes, follow this KB how to article --> http://support.apple.com/kb/ht1925
-
I recently transferred my internet service to another state.I have not yet moved my imac, just my pc laptop. I cannot get my airport extreme wireless router to work. The green light stays lit when everything is connected but I can't connect to the internet. Any suggestions?
I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Continue with step 2 in the first set of steps.
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results. -
I have just purchased a subscription of Acrobat XI Pro, which I installed in my computer a long time ago, when I first tried it. Alas, I cannot open the application, which keeps asking me for a serial number I have not yet received. What the hell is going on?
[discussion moved to Acrobat Installation & Update Issues forum.]
-
I opened iTunes and the cloud is not syncing up, so i cannot watch movies or tv shows over the cloud through itunes, however it was there a few days ago, now randomly gone.
Are you sure you bought and not rented them? Renting lets you to access the video for up to 48 hours.
Maybe you are looking for
-
I have updated adobe reader many times on my mac but still can't seem to use it when on the internet
help!
-
PE13 on Windows 8.1 and non-admin or UAC issues?
Before I try to evaluate Premiere Elements 13 64-bit, I want to ask if lingering problems related to UAC and non-admin user accounts were resolved since version 11. It's good to see a 64-bit version of Elements come out since then.
-
ITunes 8.0 - damaged library (.itl) file
Help! Last night I downloaded iTunes 8 (8.0.1 I believe). The first time I opened iTunes, it created two library database (.itl) files. One is now called "iTunes Library (damaged)" and the other is "iTunes Library." The damaged file seeems to be unus
-
First thing i cant downgrade from ios4.3.4 to 4.3.3 why? secondly, why do there are defective apps in itunes store? and will my money will be refunded or not? why cant we try products for some hours to make a buying decision? there are thousands of q
-
I just bought lumia920..but still not one month,i had several problems..1. The phone was hang and can't be restart. 2. application on the floor couldn't be open even i already touch it several times,it works again after i restart the phone.3.the phon