Department Dimension used twice for Contribution Logical Source

How do you join the same hierarchy twice to a Logical Table given the following logical columns?
Source Department, Destination Department, Amount Contributed
Sample Data
Corporate, Sales, 1,000
Corporate, Development, 2,000
Hierarchy
Top
|- Department
Corporate
|- Sale
|- Development
|- Support

Hi,
What you need to do is to add the (physical) location dimension table to the logical table source of the demographic dimension, for example by dragging it from physical layer on top of logical table source of demographic logical dimension table in bmm layer
Regards,
Stijn

Similar Messages

SMW01 - A key was used twice for multirow set type COMM_PR_CATEGORY

Hi experts!
I'm facing with next problem:
- after we delete product by program COM_PRODUCT_DELETE_SINGLE.
- now we using r3ar2-r3ar4 for replicate existing materials from r/3
and receive followng error in bdoc's (smw01)
"A key was used twice for multirow set type COMM_PR_CATEGORY" COM_PRODUCT 512
"Validation error occurred: Module COM_PRODUCT_MAT_VALIDATE, BDoc type PRODUCT_MAT." SMW3 18
Can anybody help me?
Thanks.

Hi Hon,
In my scenario there was a customizing error regarding TAXes, I solved it checking mlan registries.
Have a close look on the error mine was: A key was used twice for multirow set type CRMM_PR_TAX.
Then check on SMW01 the segment that stores this info. and look for inconsistencies.
Regards,
Pedro

No sound when clip uses mp3 for its audio source in iMovieHD

My finished DVD plays OK on computer DVD players, but when I put it in a set-top box (I've tried on two), it plays the main chapter muted. I've experimented with all possible audio settings on my set-top DVD players to no avail.
The iMovie project contained three chapters. The first and last chapters play OK, and they use camera mic audio. The one in the mddle uses mp3s for its audio, grabbed from my iTunes library (they are not DRM or anything like that).
Any ideas? I'm using iMovieHD/iDVD 6, my QT is 7.1.5

Search this forum for imported iTunes music into iDVD and you will see there are many who are having very similar issues with these imported mp3 files. The topic has been well covered already. Has it been completely resolved yet? ..... No.
However, you should follow the advice on these posts carefully and make sure to use apple's software updater to help resolve many of these known issues.
I believe John Griffin's reply /post sums up the current status well:
I suspect burning out to a CD and then pulling back in would work, but I'd love apple to do better than that. Being able to bang out a DVD in few easy steps is (was?) the appeal of the Mac/ILife suite, and I don't have the time or inclination to make the process more complex.
I just installed a new ITunes update that must have come out in the last few days, and, drumroll please,...... the problem persists....

One dimension used twice in a cube

I have one dimension, but it has two meanings. How can i use the same dimension twice in the same cube as it was two separate dimension?
Example:
There is dimension "Region". The fact table has two keys. First key means - "region of birth", and second "region of living". So one dimension has two meanings.
I tried put the same dimension twice with two different aliases in one cube. OEM shows such cube as valid, but querrying it through OLAP API, or building analytic workspace based on this cube is impossible (error ORA-1007).
The only workaround i see is to build two separate but identical dimensions.The bad side of this is that i have to create two separate but identical tables of data for those dimensions (i can't create two levels from the same column).
Raf
i work with Oracle9iR2

i did the same on Oracle9iR2 with OEM 9.2.0.1.0.
Creating the cube with two aliases for one dimension was ok.
But creating MOLAP cube from that source cube using AWM was impossible .
Also querrying that cube (the one created in OEM) for example through Discoverer or Excel is imposible.
I searched forums on that question, and some people had the same problem, but no answer.
Raf

How can i use paypal for my funding source

I've set it up and authorized it thru paypal, but it still does not pay my ballance. I can't update any apps or even download free ones, because I have a $2 ballance. I want to use my paypal account to pay this. Any ideas???

Ok... I thought you were referring to the store on your iPhone.
On iTunes on your computer, you selected PayPal then clicked Continue then logged into your PayPal account?
I don't think it's PayPal that's the issue. $2 for an app... you have to take into account taxes and fees that may apply to your location, whether in the United States or abroad. $2 may not cover the total cost of the app.
Click Tax top right corner on this page > Payment & Pricing - Apple Store (U.S.)

Aggregation rule ignored for Logical sources

Hi,
We are using materialized views as logical sources for our logical tables. These logical sources contain aggregated data at higher level for dimensions. However, we have a logical source at the most detailed level for the dimensions.
Problem: We OBIEE hits the correct logical source based on dimensions selected in answers, it does not apply the default aggregation rule.
For instance, if a measure has aggregation as AVG, then when the logical sources corresponding to aggregated tables are queried, OBIEE does not apply AVG function. However, it does apply the aggregation rule when it uses the logical source at the most detailed level.
I have specified the aggregation content properly for every dimension.
Any pointers to debug the issue will be helpful.
Thanks,

Click on LTS of Table - Column Mapping - Select the logical column - click on expression - Put your logic here. You will get Aggregation rule is enalbed for the column.
Why ? -- Reason could be nested aggregation is not allowed. Aggregation on the normal column applied during query generation at run time. If you use that Agg.Measure to derive another Agg.measure server could not recognize it during runtime.

Model uses wrong logical source for aggregation

Hi all,
i faced with problem when my model uses the wrong logical source to display pre-aggregated data. I have 5 logical sources with pre-aggregtaed data for my fact table and use two dimensions for mapping these sources:
Dimension "Geography": Country->State
Dimension "Periods": Year->Quarter->Month->Day
source 1 (most derailed) - mapped to levels: DAY, STATE
source 2 - mapped to DAY, COUNTRY
source 3 - mapped to MONTH, STATE
source 4 - mapped to MONTH (only this level)
source 5 - mapped to MONTH, COUNTRY
When i run my request - measure by DAY - it uses source 2, instead of using source 1 as i supposed. Can anybody explain me why?
BR,
Alex

What am i understanding from here is BI server decided on the best way to get the job done. You are having day at source 1 and source 2. But source 2 is aggregated at higher level than the source 1 with respect to region dimension. So as a matter of fact the best source for day is source 2.

[39008] Logical dimension table ... has a source ... that does not join to

Oracle BI 11g
Hi,
I have this set of tables:
1) Table "Sales" with fields: ID, Billdate, ProductID, Amount
2) Table "Products" with fields: ID, ProductName, BrandID, TypeID
3) Table "Brands" with fields: ID, Name
4) Table "ProductTypes": ID, Name
In Physical layer I add these tables and create Physical Diagram with constraints like this:
[Brands] -------------------->[Products]
[ProductTypes] ---------->[Products]
[Products] -----------------> [Sales]
In Logical Layer I create logical table T1 Products with sources:
- LTS1 Brands,
- LTS2 ProductTypes,
- LTS3 Products
and fields:
- ProductID
- ProductName
- Brand
- ProductType
After that I create Dimention With Level-Based Hierarchy (H1 Products):
Total Products
- Brands
-- ProductTypes
--- Detail Products
When I try "Check Global Consistency" I get warning: "[39008] Logical dimension table T1 Products has a source LTS1 Brends that does not join to any fact source."
And after that when I try to make Analysis in Oracle BI, for example:
H1 Products | Amount
and then drill down item "Total Products" I receive error:
"State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14025] No fact table exists at the requested level of detail: [,Brand,,,,,,,,,]. (HY000)"
What's wrong? Where do I mistake? And why I don't get any messages about Logical Table Source LTS2 Product Type?

Hi,
you can create a single LTS for the product with the join for all 3 tables. Do you have a particular reason for the modelling that you have used?
Regards,
Gianluca

A question about the multiple source table for the logical table

Hi All,
I am to test, having two physical sources for an logical table, but it is failing as it is always getting data from only one table rather than two tables.
!http://picasaweb.google.com/KSivaUS/OracleForumQuestions#5433761212378087346!
Any suggestion or inputs would be appreciated.
Thanks
Siva

your 2 measure columns are in the same unique - low level??
your connections look good.
which is the result if you bring only the sales column at your report??is it the sum of the 2 datasources??
try to repass again all your bussiness model.or make an other one.
fisrt pass your fact with 2 sources and then your dimensions....
as i can see you have customer_dim,do both of your columns have the appropriate key to this dimension??try to make a physical connection from both fact sources to this dimension as well as for time...
if you do it in this way ,there is no possibility not to work
hope i helped...
http://greekoraclebi.blogspot.com/

I am running 10.6.8 and using iweb for my web site. After several SEO analysis they all indicate I need H1-6 header tags. After looking at the source code I see there are none in iweb. Is it necessary to add? If so, how do I add H Tags to iweb.

I am running 10.6.8 and using iweb for my web site. After several SEO analysis they all indicate I need H1-6 header tags. After looking at the source code I see there are none in iweb. Are they necessary to add? Why would one add these tags and how do I add H Tags to iweb? And are there examples to look at? I am slowly learning about simple web design and assumed that iweb was stand alone without having to write code. Is this one of the reasons iweb is no longer supported? Thanks for looking at this!

A simple text page like this:
Heading
    sub heading
          text paragraph ....
Is traditionally represented by html tags like:
<h1>Heading</h1>
     <h2>sub heading</h2>
          <p>text paragraph ... </p>
I would guess that the use of h1-h6 tags helps search engines to understand the structure of a page as the tags imply a certain structure.
This can be compared to more generic tags like <div> that could represent any kind of content - and may be what iWeb uses (you'll have to check yourself).
I would generally recommend that you use some kind of up to date blog/site building tool, perhaps Wordpress or Squarespace (I haven't used either one myself) that support current web technologies - this should reduce your SEO issues and make it easier to properly support mobile/tablet users.

I would appreciate it if someone could advise me as to the optimum resolution, dimensions and dpi for actual photographic slides that I am scanning for use in a Keynote Presentation, that will be projected in a large auditorium. I realize that most proje

I would appreciate it if someone could advise me as to the optimum resolution, dimensions and dpi for actual photographic slides that I am scanning for use in a Keynote Presentation, that will be projected in a large auditorium. I realize that most projectors in auditoriums that I will be using have 1024 x 1200 pixels, and possibly 1600 x 1200. There is no reference to this issue in the Keynote Tutorial supplied by Apple, and I have never found a definitive answer to this issue online (although there may be one).
Here’s my question: When scanning my photographic slides, what setting, from 72 dpi to 300 dpi, would result in the best image quality and use up the most efficient amount of space?
Here’s what two different photo slide scanning service suppliers have told me:
Supplier No. 1 tells me that they can scan slides to a size of 1544 x 1024 pixels, at 72 dpi, which will be 763 KB, and they refer to this as low resolution (a JPEG). However, I noticed when I looked at these scanned slides, the size of the slides varied, with a maximum of 1.8 MB. This supplier says that the dpi doesn’t matter when it comes to the quality of the final digital image, that it is the dimensions that matter. They say that if they scanned a slide to a higher resolution (2048 x 3072), they would still scan it at 72 dpi.
Supplier No. 2: They tell me that in order to have a high quality image made from a photographic slide (starting with a 35 mm slide, in all cases), I need to have a “1280 pixel dimension slide, a JPEG, at 300 dpi, that is 8 MB per image.” However, this supplier also offers, on its list of services, a “Standard Resolution JPEG (4MB file/image – 3088 x 2048), as well as a “High Resolution JPEG (8 MB file/image – 3088x2048).
I will be presenting my Keynotes with my MacBook Pro, and will not have a chance to try out the presentations in advance, since the lecture location is far from my home, so that is not an option.
I do not want to use up more memory than necessary on my laptop. I also want to have the best quality image.
One more question: When scanning images myself, on my own scanner, for my Keynote presentations, would I be better off scanning them as JPEGs or TIFFs? I have been told that a TIFF is better because it is less compressed.
Any enlightenment on this subject would be appreciated.
Thank you.

When it comes to Keynote, I try and start with a presentation that's 1680 x 1050 preset or something in that range. Most projectors that you'll get at a conference won't project much higher than that and if they run at a lower resolution, it's better to have the device downsize your Keynote. Anything is better than having the projector try and upsize your presentation... you work hard to make it look good, and it's mangled by some tired Epson projector.
As far as slides go, scan them in at 150 dpi or better, and make them at least the dimensions of your presentation. Keynote is really only wanting 72dpi, but I do them at 150, just in case I need to print out the presentation as a handout later, and having the pix at 150 dpi gives me a little help with their quality on a printer.
You'd probably have to drop in the 150 versions again if you output the Keynote to .pdf or Word or something, but at least you have the option.
And Gary's right (above) go ahead and scan them as TIFFs. Sooner or later you'll want to do something else with these slides (like make something for an iPad or the like) and having them as TIFFs keeps your presentation looking good.
Finally, and this is a big one, get to the location for your presentation ahead of time if you can, and plug the laptop in and see what you get. There's always connection problems. Don't let the AV bonehead tell you everything will work just fine ('... I don't have any adapters for a Mac...') . See it for yourself... you're the one that's standing up there. Unless it's your boss, then you better be really sure it works.

Can you use SQL as a data source for a project in the same way you can in Excel?

Excel allows you to create a data source that executes a SQL stored procedure, display that data as a table in a spreadsheet and have that data automatically refresh each time you open the spreadsheet. Is it possible to do the same thing in MS Project, displaying
the data from the stored procedure as a series of tasks?
Here's what I'm trying to do - I have a stored procedure that pulls task data meeting a specific criteria from all projects in Project Server. We're currently displaying this data as an Excel report. However, the data includes start dates and durations so
it would be nice to be able to display it as a Gantt Chart. I've played around with creating a Gantt chart in Excel and have been able to do a very basic one, but it doesn’t quite fit our needs.

No, You can not use sql as a data source for a project.
You have 3 options to achieve it:
1. You can create a Sharepoint list with desired column ,fill desired data in that list then you can create a MS project from Sharepoint List.
2. You can create a SSRS report in which you can display grantt chart Joe has given you that link.
3. You can write a macro in MPP which will take data from your excel. In excel you will fetch data from your stored procedure. write a schedule which will run every day to update your data or
create an excel report in which will update automatically and write macro in mpp which will fetch the data then publish it so that it would be available to team members.
kirtesh

I'm new using Logic, i've been using garageband for quite awhile now though but my question is just basic. When i want to record electric guitar while clicking the software option it brings me to alot of guitar sounds that i want to chose. I chose the twa

I'm new using Logic, i've been using garageband for quite awhile now though but my question is just basic. When i want to record electric guitar while clicking the software option it brings me to alot of guitar sounds that i want to chose. I chose the twangy electric or the distorted strat but i only hear clean sounds. No matter what kind of guitar sound i chose in the library it only produces clean guitar. How can i make it sound like it supposed to? Did i miss something i should do?

This definitely has me stumped as I'm unsure as to why your guitar can be heard, but with none of the channel strips plugins applied to the sound.
On the record enabled channel strip that contains your guitar input, is the "I" button located near the "R" active? Also, if you record your guitar, can you hear the FX applied to it when you play back the recorded track?

Why am i being charged twice for 11.04 and 11.46 when I did not purchase those songs, I used an itunes card 25$ and I still have 0.04 cents left?

Why am i being charged twice for 11.04 and 11.46 when I did not purchase those songs, I used an itunes card 25$ and I still have 0.04 cents left?
I couldnt redeem w/o an apple ID so when i did it asked for a credit card. And I want to discontinue and remove my account from itunes but it wont let me, there is no account discontinue or removal of account

Because too much time has passed I can't edit this into the prior comment, but here is the info regarding reverting to iTunes 11.0.2 (assuming you do have a time machine backup) from https://discussions.apple.com/message/22057703#22057703
W. Raider wrote:
Repairing permissions doesn't fix it.
I reverted to the previous version, 11.0.2.
1. Quit the new crash-prone iTunes.
2. Delete the app.
3. Restore v. 11.0.2 with Time Machine.
4. In your iTunes folder look for a folder called "Previous iTunes Libraries", find the latest one.
5. In the iTunes folder itself you'll see "iTunes Library.itl", delete it (or compress it and save a copy for later just in case.
6. Copy the newest .itl file in Previous iTunes Libraries to the iTunes folder and rename it "iTunes Library.itl".
7. Launch the older version of iTunes.
My crashing has seemed to have ceased with a revert to an older version. I noticed today that the newer crashing iTunes had been launched for hours but not playing anything, when I played internet radio it crashed within 5mins, fed up I reverted to an older version.
Btw, a simpler way to do this is to revert to older iTunes app, then hold Option when it launches and choose an older library.

I cannot shut dow my MacBook Pro using the apple icon (as it was suppose to be), actually I have to press and hold the on/off buttom. I have taken twice for Mac dealer and they did not solve the problem. What must I do?

I cannot shut dow my MacBook Pro using the apple icon (as it was suppose to be), actually I have to press and hold the on/off buttom. I have taken twice for Mac dealer and they did not solve the problem. What must I do? I would to remark that I have installed 2 antivirus and uninstalled one of them. Since then I have facing this troublesome issue. Thanks

Uninstall the other AV software. They are not needed. All they do is cause trouble like you are having now.
If you have been forcing the Mac to shut down with the power switch you may nave corrupted your disk. You should repair it with disk Utilty to remove any corruption the shutdwons may have cased.
Allan

Department Dimension used twice for Contribution Logical Source

Similar Messages

Maybe you are looking for