Dependency detection for simulation of models including ucb block(s)

Running sim() function for the models that include a ucb block will automatically
invokes the make utility to build the required shared object "simucb.so.1.0".
If the main C file (which is indicated by the block "file name" parameter) of ucb
block is changed then the make utility will be invoked before the simulation is started.
This works fine if the ucb only requires a single C file. However, if the ucb requires other
C files (or libraries) the sim() does not detect the dependencies correctly.
To illustrate the problem, consider that a ucb requires ucb.c as the main file
and also requires file1.c and file2.c (which are indicated in the Makefile).
simucb.so.1.0 will be re-built each time that ucb.c file is changed. However, if
file1.c or file2.c are changed the sim() will not build the simucb.so.1.0 eventhough the makefile
recognizes simucb.so.1.0 to be dependent on file1.c and file2.c,- The sim() will
not call the make utility in the case of changes to file1.c and file2.c.
Any suggestion to resolve this issue?

Hi,
We are using xmath 7.1.4 on Solaris.
Just to clarify, the multiple C-files are all related to a single ucb file and cannot be separated.
To illustrates the problem, I attach a zip file including:
1- example.xmd: sysbld model
2- usr01.c: ucb c code
3- myfile.c: implementation of getGain() function required by usr01.c.
4- makefile
You can see that sim() will rebuild the simucb.so.1.0 when usr01.c is changed and will not
rebuild the simucb.so.1.0 when myfile.c is changed.
Note that calling unix "make" utility from the command line will always work correctly.
Thanks
Attachments:
example.zip ‏7 KB

Similar Messages

Compile Errors occured when simulink models including 'cmex' by SIT

I am trying to compile a simulink model to DLL with following softwares and hardwares.
Software:
LabVIEW 8.0.1
LabVIEW Realtime 8.0.1
Simulation Interface Toolkit 3.0
MATLAB R13
Visual C++ 6.0 Service Pack 4
Target Hardware:
PXI-1042RTPXI-8196
PXI-6289
When I tried to compile a model including 'cmex' function on Simulink to DLL, compile error about Visual C++ occured. Does SIT support the model including 'cmex' functions?
When I removed the function 'cmex', compiling is working correctly.
To import original model which is written by C or other language, I strongly want to use 'cmex' functions. To avoid the compile error, if you have any ideas, please let me know.
Thanks,
Tsugo

Hello Tsugo,
I believe that it is possible to compile a DLL for SIT from a model that contains a cmex function.
To tell whether the issue is caused by SIT or not, you can try changing the RTW target file from nidll.tlc to grt.tlc (in the model's Simulation Parameters dialog, look in the Real-Time Workshop tab), and see whether the compile error still happens. If the compiler error occurs with grt.tlc, then please refer to the documentation provided by The MathWorks Inc. on how to get your cmex functions to work in Real-Time Workshop®.
If the compiler error does not occur with grt.tlc, then please post the whole text of the compiler error.
Thanks!
Andrew

External Video Monitor Not an Option for Simulator

In the preferences pane for simulator Playback Output options, I am only able to simulate in the simulator window. It doesn't even give me the option to select any external video devices, even when plugged in (and detectable by other programs like FCP). I've even reinstalled DVD Studio Pro 4.02 and it hasn't solved the problem. Help anyone?

Hey, Aldershot. Glad it helped.
it still baffles me that with almost all the other so called Pro Apps manage to have broadcast monitor support
The problem is that Apple is really innovating with OpenGL, and this bring a lot of benefits but also some inconveniences. Notice that Motion's frame rate falls to half when you enable video out with a Decklink, AJA or even Firewire DV. And in DVD SP you have this limitation. Looks like routing the signal from AGP to PCI is the problem.
But going out through s-video!!!! yeah lets just through all our hard work out the window.
Please don't take this as I pretenend to know it all, but you know what? IMHO, Super video is really underrated. It's much closer to Component than it is to Composite. For a lot of professionals, myself included,it wouldn't be that easy to tell Y/C appart from Component, while the difference from either to Composite is gigantic
We need to view this in true RGB space.
Actually, it is RGB What it probably isn't is YUV. But it is probably more reliable as a preview than Firewire DV, for the reasons I explained in the previous message.
I know is a compromise solution. For me, the worst part is that you either loose a second computer display or have to buy a new AGP card with a separate Super video output.
All the best.

Driver for Qualcomm Atheros model QCWB335 Windows 7(64)

Sorry that one didn't work for you. Unfortunately, I don't have any other suggestions for you to try.

Hello. I am looking for a Driver for Qualcomm Atheros Model QCWB335 for Windows 7(64). (802.11 b/g/n WLAN and Bluetooth(R) [1x]) I tried the HP support system discovery and recommended driver report, it reads incorrect hardware and product. I tried this soulution hoping for backwards compatibility, but it did not work. http://h30434.www3.hp.com/t5/Wireless-Internet-Home-Networking/Driver-for-Qualcomm-Atheros-model-QCWB335/m-p/4073978/highlight/true#M70244 My notebook is an HP Pavilion 17t (f000?) P/N: J5R51AVI upgraded the BIOS to F.34Windows 7 Ultimate (64)Installed drivers sp67265, sp68433, sp67625, and failed to install the sp66402. Ethernet connection works, WLAN and Bluetooth do not.The WLAN and bluetooth worked fine with Linux Ubuntu 14.04 History of the laptopOn Feb 5th, 2015 ordered from factory:HP Pavilion 17t Windows 7 Professional P/N: J8H36AV with 802.11 b/g/n WLAN and Bluetooth(R) [1x] Received:HP Pavilion 17t Windows 7 Professional P/N: J5R51AV with 802.11 b/g/n WLAN and Bluetooth(R) [1x] Worked great out of the box. Tried to install Ubuntu as a dualboot, and discovered I would need to tweak the Ubuntu install to work with the 4 partitions HP had already set up on the hard disk. Instead, I backed up Windows with the Windows backup, created a bootable recovery disk on to a USB via HP recovery wizard. The HP recovery wizard said the USB recovery disk was a success. I reformatted the hard drive usint Active@ killdisk and installed Linux Ubuntu 14.04 successfully. Everything on the laptop worked, including the WLAN and Bluetooth. Backed up Ubuntu using the Ubuntu backup utility, and also created a clone of the hardrive using Clonezilla live 2.3.2. Attempted to boot from HP Recovery disk on USB and it failed. Tried again, failed. Contacted HP, they graciously sent out recovery disks for free. Only they sent recovery disks for Windows 8.1, so I contacted HP again and they graciously sent recovery disks for Windows 7. Recovery disks would work almost all the way through the Windows installation, giving 3 errors and allowing an install log to be copied. The errors were "chkErrBB.CMD Detect some error during PININST_BBV.", "check c:\system.sav\logs\BurnBootWarn.log.", and "check c:\system.sav\logs\BurnBootMerg.log." Scanning the hardrive showed that the 4 partitions HP factory installs were installed, but the Windows folders were shell folders. HP support had contacted me and suggested I send the laptop in and pay them to install the restore, and I instead purchased Windows 7 Ultimate for a clean install. Using HP support driver tools, it reports the wrong notebook and suggest drivers for a WLAN radio that I do not have installed on the motherboard. I updated the BIOS to F.34 and that did not help. I don't know how to extract the driver from the HP driver and utilities recovery disk HP sent me, it is in a file format I do not know how to manipulate. I can connect to the internet using the ethernet cable, just not the WLAN.

Program for creating a model is locked by User

Hi Guys,
We have created a process chain to create the Integration Model and to activate the Integration Model using this prg RIMODGEN. So, This prg we have created variants for different location wise. This process chain contains 13 processes For each location, which is running in parallel. Some time we are getting the error message " Program for creating a model is locked by User
Regards

Dear Pullaiah,
Locking happens if there is any overlap of models or duplicate scheduling of jobs with same variant.
See include LCIFIF01
CALL FUNCTION 'ENQUEUE_ECIF_IMOD'
EXPORTING
    mode_cif_imod = 'E'
    modelname      = i_modid
    logsys         = i_logsys
    apoapp         = i_appl
EXCEPTIONS
    foreign_lock   = 1
    system_failure = 2
    OTHERS         = 3.
So this means for you, you get the lockentry if the modelname, logsys and apoapp is the same. So please check again your variants if there is one with the same integrationmodels.
This can be the only reason we you get here this entry in your joblog.
Regards,
Tibor

ALE: how do I use dependent distribution for customer and vendor addresses?

Hello SDN'ers
Hopefully someone can help me with an ALE question.
We have two ERP systems connected with ERP - Retail and AFS.
Customers and Vendors may be created in Retail, and are distributed to AFS using DEBMAS, CREMAS and ADRMAS messages.
Not all customers and vendors are required in AFS, so we have various filters set up in the Retail distribution model (BD64).
However with the filters in place, addresses were still being distributed for customers and vendors that had been filtered out.
To try and avoid this for vendors, we created a filter group for AddressOrg.SaveReplica in receiver determination. In the filter group we selected Dependent Distribution for CREMAS (Address owner object).
This works perfectly for vendors - vendor addresses are now only distributed if the vendor itself is distributed.
However I've now discovered it is preventing any customer addresses from being sent! I was surprised about this: I expected CREMAS dependency to only affect vendor addresses. Can someone tell me:
- is this how dependent distribution is designed to work? In which case can anyone offer any suffestions to achieve the filtering some other way?
- or are we doing something wrong to be getting this result?
Thanks for any help!
regards, Roger

Hi all,
as Robert suggested, I've written an exit to get round this, although I'm surprised I should need to!
What I did was to code an enhancement in function group BDBF, at the start of subroutine COMPUTE_LOGIC_EXPRESSION.
* In the case of addresses, dependencies should only be applied for the appropriate type of address
data: lwa_tbd14 type tbd14.
if P_MODEL_DATA-FTYPE = C_FTYPE_DEPENDENCY_FROM_MESTYP.
*   Dependency from Message Type.
*   Read the Address Object type
    READ TABLE P_FILTER_VALUES
                     WITH KEY OBJTYPE = 'AD_OBJTYPE'
                     BINARY SEARCH.
    if sy-subrc = 0.
*     Check if the Message Type is linked to the Address Owner Object Type
*     (Table is buffered on DB)
      select single *
        from TBD14
        into lwa_tbd14
       where MESTYP = P_MODEL_DATA-FMESTYP
         and OBJTYP = P_FILTER_VALUES-OBJVALUE.
      if sy-subrc <> 0.
*       Wrong type of address for this dependency - stop here
        P_REPLICATE = c_true.
        exit.
      else.
*       Correct address type. Standard processing continues, checking any
*       filter values set up against the Address Owner Object Type.
      endif.
    else.
*     It isn't an address - continue with standard processing
    endif.
endif.
Let me know if this helps you, or if you know of a better way to achieve the same result.
Roger

Get a Samsung HDTV and ATV or wait for the latest model?

A newbie to HDTV, video and ATV.
I have almost decided to buy the Samsung 50" plasma HDTV PN50A650. But have discovered that Samsung has a new model PN50A760 with added capabilities for playing video and wireless networking.
Connectivity is an issue to me. Spending all the green on a HDTV, I do not want it to be obsolete in 4 years. What if I get a digital camcorder? Or Apple introduces a flat-rate movie-rental scheme? My options:
OPTION A) Wait a few months until the $500 premium for the new model drops.
Some excerpts for reviews of the latest 760 model:
"The 7 series can playback video content stored on a USB device while the 6 series are limited to images and audio."
(Naively, I thought that all HDTVs should be able to play back video.)
"The 7 Series can stream audio, video and pictures over your home network."
"The TV recognizes not only MP3 and JPEG files but also XviD and MPEG4 files to enjoy video playback."
"The TV can also reach out to your home network and play back photos, videos and music stored on networked computers. You'll need to install special software, included with the TV, onto your PC." This could be some very basic software. Suitable for Macs?
"While this feature seems pretty cool, it's not as good as similar functionality built into a PS3 or an Xbox 360, let alone that of a dedicated network media streamer like Apple TV. Despite being billed as DLNA-compliant, the TV won't play nice with DLNA server software like Windows Media Player 11 or TVersity, so you're stuck with the included proprietary software. Samsung's software is basic..." (Compatibility with Macs?)
OPTION B) Buy the older model and then, add ATV. The total cost will be less and I think, the video playback (through my iMac?) and networking capabilities (2Wire Wi-Fi) will be much better. But I see there have been problems between ATV and Samsung HDTV.
Isn't the combo with ATV a much more capable and flexible (and cheaper) long-term solution? Which Samsung is unlikely to match?
Thanks for your valuable advice! (Urgent for the X-Mas season!)

Winston, I think you're missing my points:
1) If you're interested in a device for watching HD video, then you can compare the AppleTV and Blu-Ray. You then have to look at what other features they provide, or don't provide as the case may be, and decide. I was just giving my opinion on an alternative.
2) There was no detailed information given as to what the streaming capabilities were and so I was giving my opinion again.
To say that there is little difference quality wise between current HD broadcasts (even if some are 1440x1080i) and the maximum output of the AppleTV at 1280x720 shows a total lack of experience on your part of watching HD broadcasts on a TV capable of 1920x1080, or a lack of appreciation of the better detail contained in the picture. It's like comparing AppleTV HD at 1280x720 with DVD PAL native resolution of 720x576 and saying there is little difference quality wise. But then if you look at the US market where 30fps is standard, the AppleTV cannot support resolutions higher than 960x540, and then you really are lowering the benefits of the AppleTV over DVD quality, and the difference between the AppleTV and HD broadcasts is even bigger.
I have compared video from HD broadcast at 1920x1080 with the same video converted down to 1280x720 on the AppleTV, and the loss of detail is noticeable, especially when watching on a 40" TV, not an uncommon size these days with them being used with games consoles. Before you comment, no it is nothing to do with how I convert them, there is just physically far fewer pixels available. I much prefer watching 1920x1080 through my Media PC than watching 1280x720 through my AppleTV.
Also, as we all know it happens, there is software available freely on the internet - no names will be mentioned - that allow the convertion of movies from DVD to a PC, and likewise from HD-DVD and Blu-Ray to a PC. So reality is that it's available now and with the cost of 1TB and 1.5TB HDDs so cheap, the potential for a 1920x1080 resolution video collection for playing on a 1920x1080 TV is already there. Saying it's not going to happen 'any time soon' is rediculous as it's already happening, albeit quietly, especially as talk of how to do such things is not allowed on this forum.
You keep using this phrase 'any time soon' without quantifying it. You use words like 'unlikely'. We live in a fast changing world. The world of televisions has changed dramatically in the last two years, whereby nearly all mid-priced TVs (both plasma and lcd) from about £800 GBP upwards now support native 1920x1080. Two years ago I paid over £1500 GBP for a 37" plasma supporting native 1024x720. You can now buy Sony OLED 11" TVs, which a couple of years ago were just being shown off as prototypes. In my opinion, OLED will blow away lcd and plasma tv sales within 5 years, and in my timescale, that is any time soon.
12 months ago I bought a blu-ray player for a PC, whilst people around me were going for hd-dvd. The format wars was predicted as not going to end 'any time soon' and no one could have forseen that within 6 months the whole blu-ray / hd-dvd argument would be over.
For your information, ABC in the US have been broadcasting in HD for over 10 years.
But as I keep saying Winston, these are my opinions. You're allowed yours and I'm allowed mine.

Planning of Dependent Requirements for BOM Components in Make to Order scen

Hi Friends - I want to execute a full cycle Make to Stock Scenario with Materials planning using MRP.
The scenario will include BOM Components with Routing.
The process flow I want to execute -
1. Create a Sales Order for a Finished Product (Product should have a BOM for Production)
2. Do the product Materials Planning for the Sales Order through MD50
3. Get all the dependent material requirements (both for products as Planned Order and also for BOM Components - all the BOM components should also be planned)
4. Convert Planned Order for Product to Production Order
5. Convert Planned Orders for BOM components to Purchase Requisition
6. Confirm Production Order
To execute this I have done the following
1. I have created a Material Master data for Finished Product (FERT).
2. I have assigned Item Category Group - NORM, and General Item Category group as NORM
3. I have assigned MRP Type PD in MRP 1 View and Strategy Group 20 (Make to Order Production) in MRP 3 View.
4. Now created a Universal (Type 3) BOM for the product with one material component.
5. Now also created a Routing for the Material with two operations having PP01 a control key.
6. Now created a standard sales order for the product.
7. Executed the MD50 for the Sales Order Item.
Now where do I find the BOM components for this material in the Sales Order?
After executing the planning Run MD50 I am only getting the requirements for Product only. I can't see any dependent requirements for the BOM components.
How do I make sure that the BOM components are also planned while the product is planned?
I have checked the component Stock Requirement List - there are no requirements generated from the Sales Order Product BOM.
Pls help me on this. How to do this so that the raw material components are also planned?
Thanks
Purnendu

Hi Dhaval, Sandeep, Ashok - Thanks a lot for your replies.
I have checked the Planned Order Created through Planning Run.
If I click on the Components Tab I am getting following message
No material components were determined
Message no. 61027
Diagnosis
Until now, no BOM explosion has been carried out or no BOM has been created for this material yet.
Procedure
Either explode the bill of material for this material, or
create the components manually by processing the planned order in change mode.
If I try to explode the BOM through Header Menu - Edit> Explode BOM
I am getting the same message.
If I click on the Bill of Material Tab - I am getting the same above messge.
Ashok - I have tried both the Selection Method -
Nil - Selection by Order Quant.
1 - Selection by Explosion Date
But with no effect.
Waiting for your advice.
Thanks and warm regards
Purnendu

Best Practice for using multiple models

Hi Buddies,
     Can u tell me the best practices for using multiple models in single WD application?
    Means --> I am using 3 RFCs on single application for my function. Each time i am importing that RFC model under
    WD --->Models and i did model binding seperately to Component Controller. Is this is the right way to impliment multiple            models in single application ?

It very much depends on your design, but One RFC per model is definitely a no no.
Refer to this document to understand how should you use the model in most efficient way.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/705f2b2e-e77d-2b10-de8a-95f37f4c7022?quicklink=events&overridelayout=true
Thanks
Prashant

WLC Duplicate IP address detected for AP-Manager Interface

I am getting an error log in the WLC saying, its IP address is duplicate by another machine with MAC address A.B.C.D
But this MAC address A.B.C.D is the MAC address of the AP-Manager Interface in the same controller.
Model No.                   AIR-WLC2106-K9
Software Version                 7.0.116.0
%LWAPP-3-DUP_IP: spam_lrad.c:27626 Adding client 58:b0:35:83:72:86 to exclusion list due to IP Address conflict with AP 'AP_DUXO_3'
%LWAPP-3-DUP_AP_IP: spam_lrad.c:27612 Duplicate IP address detected for AP AP_DUXO_3, IP address of AP 10.184.1.224, this is a duplicate of IP on another machine (MAC address 58:b0:35:83:72:86)
Cisco AP Identifier.............................. 1
Cisco AP Name.................................... AP_DUXO_3
Country code..................................... US - United States
Regulatory Domain allowed by Country............. 802.11bg:-A     802.11a:-A
AP Country code.................................. US - United States
AP Regulatory Domain............................. 802.11bg:-A    802.11a:-N
Switch Port Number .............................. 1
MAC Address...................................... cc:ef:48:1a:e4:af
IP Address Configuration......................... Static IP assigned
IP Address....................................... 10.184.1.224
IP NetMask....................................... 255.255.0.0
Gateway IP Addr.................................. 10.184.20.2
Domain...........................................
Name Server......................................
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Enabled
Ssh State........................................ Disabled
Cisco AP Location................................ DUXO_BOX
Cisco AP Group Name.............................. default-group
Does anyone have an issue like this ?

Are you sure this MAC address 58:b0:35:83:72:86 isn't some type of Apple device? Its OUI is registered to apple. How do clients get ip addresses DHCP? It appears that the IP 10.184.1.224 is statically assigned to your ap-manager and that this client 58:b0:35:83:72:86 is either getting that same IP from DHCP or the client is statically assigning it themselves.

OC4J 10.1.2 - No XPathFactory implementation found for the object model

Hello,
We are doing some maintenance on an old 10.1.2.3.0 container. The project has to be extended with a library built with xml-apis-1.3.03.jar. I know you will suggest a upgrade, but that is a no-go - sorry, since other projects also are running on this server. So I hope some of you remember or know how to avoid or replace the oracle xml parser.
It seems like it gets the wrong XPathFactory
XPathFactory#newInstance() failed to create an XPathFactory for the default object model: http://java.sun.com/jaxp/xpath/dom
with the XPathFactoryConfigurationException: javax.xml.xpath.XPathFactoryConfigurationException: No XPathFctory implementation found for the object model:
I have searched the documentation for 10.1.2 and everything relevant on the Internet for a solution, but i seems to non-trivial when dealing with oracle xml parser. We tried to put the jar-files (xml-apis-1.3.03.jar, xercesImpl-2.8.0.jar, xalan-2.6.0.jar) in the endorsed library under the jdk, and we have already added <web-app-class-loader search-local-classes-first="true" include-war-manifest-class-path="true"/> to our orion-web.xml.
I also know that the <shared-library> tag got introduced in 10.1.3 where you easily can replace the parser.
Any ideas on how to deal with this exception or comments to the interpretation on the exception are appreciated.
-MK

Hello,
You are correct, in OracleAS 10g (10.1.2), Oracle does not expose JMX MBean server.
OracleAS 10g R3 (10.1.3) is a J2EE 1.4 container will full support for JMX, and all the JSR-77 MBeans exposed. You can also create and register your own MBeans.
Could you give us the different requirements you have around JMX for your application?
Regards
Tugdual Grall

What is the total price for an iphone 5 including tax

what is the total price for an iphone 5 including tax

Depends upon the model you want, and where you live. Quit trolling.

Ac adapter for hp simplesave model MD2000h

lost or misplaced my ac adapter for hp simplesave model MD2000h. The external HD does not have any spec requirements written by the serial/model number. I don't remember how the ac adapter looks like either. Help?

Hi Silvana,
To find the right adapter there are a couple of ways we can do that. First, I found a link to the user guides for your external drive and from the User Manual I got support information. Their website is http://hpsupport.wdc.com and their toll free phone number is 1-866-444-7407. Try contacting them and they should be able to tell you the correct adapter.
Link to User Guides:
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&dlc=en&lang=en&lc=en&product=4023092&
You can use the actual product number which you should be able find on a sticker on the external hard drive or the box it came in. If you find that product number you can order the part from HP Parts Store and I have included a link below.
http://h20141.www2.hp.com/hpparts/
I believe that your best option would be to contact their support.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

ADF mobile: Reuse taskflows for different device models (resolutions) ?

Hi,
ADf 11.1.2.3.0 + mobile extension.
What's best practice to create the same mobile app for different device models (= different screen resolutions = different layout)?
I mean an app on a smartphone may use different gui components and layout than on a tablet device.
In adfmf-feature.xml the content of a feature can be either a amx page or a task flow.
Here I can add a constraint to determine e.g. the device.model and use different amx pages depending on the device model.
But how to reuse the task flow (assumtion: the taskflow is independent from the device model) and just create specific amx page per device model?
regards
Peter

Replying to an old thread.
With ADF Mobile 11.1.2.4.0, to display different content views for different devices, it is recommended that we use following property as a constraint on the content of the feature.
Property
Operator
Value
hardware.screen.diagonalSize
more
6
It applies this constraint on the devices which have screen size more than 6 inches. Which is applicable for the tablets.
For more details, look at the HR sample found at the following location in your JDev after installing the ADF Mobile Extension
jdev_install/jdeveloper/jdev/extensions/oracle.adf.mobile/Samples

[svn:fx-trunk] 12936: -make sure the bundles directory for airspark is not included in the package fixes bug SDK-24552

Revision: 12936
Revision: 12936
Author:   [email protected]
Date:     2009-12-14 19:40:23 -0800 (Mon, 14 Dec 2009)
Log Message:
-make sure the bundles directory for airspark is not included in the package fixes bug SDK-24552
-remove (from svn) the en_US/docs directories for textLayout because these directories and dita files are created by asdoc in the doc target
-updated the main build.xml to not include the playerglobal project
-updated fat-swc targets in osmf,automation_spark,automation_flashflexkit,automation,airspark, and textlayout to remove the doc directory.
QE notes: make sure copylocales works properly
Doc notes: no
Bugs: SDK-24552
Reviewer:
Tests run: checkintests
Is noteworthy for integration: no
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-24552
    http://bugs.adobe.com/jira/browse/SDK-24552
Modified Paths:
    flex/sdk/trunk/build.xml
    flex/sdk/trunk/frameworks/projects/airspark/build.xml
    flex/sdk/trunk/frameworks/projects/automation/build.xml
    flex/sdk/trunk/frameworks/projects/automation_flashflexkit/build.xml
    flex/sdk/trunk/frameworks/projects/automation_spark/build.xml
    flex/sdk/trunk/frameworks/projects/osmf/build.xml
    flex/sdk/trunk/frameworks/projects/textLayout/build.xml
Removed Paths:
    flex/sdk/trunk/frameworks/projects/airframework/bundles/en_US/docs/
    flex/sdk/trunk/frameworks/projects/automation/bundles/en_US/docs/
    flex/sdk/trunk/frameworks/projects/automation_flashflexkit/bundles/en_US/docs/
    flex/sdk/trunk/frameworks/projects/automation_spark/bundles/en_US/docs/
    flex/sdk/trunk/frameworks/projects/framework/bundles/en_US/docs/
    flex/sdk/trunk/frameworks/projects/rpc/bundles/en_US/docs/
    flex/sdk/trunk/frameworks/projects/textLayout/bundles/en_US/docs/

Well, I've tried compiling a package and I have modified the PKGBUILD file to look like this now. (Keeping it as simple as possible)
pkgname=dvbcut-svn
pkgver=16
pkgrel=1
pkgdesc="DVBCUT-svn is an application that allows you to
edit MPEG files. ie: Remove TV ads. (SVN version: Fri, 01 Dec 2006)."
url="http://dvbcut.sourceforge.net"
depends=('qt' 'libao')
makedepends=('subversion' 'scons')
conflicts=('dvbcut' 'ffmpeg')
provides=('dvbcut')
source=()
md5sums=()
_svntrunk=https://svn.sourceforge.net/svnroot/dvbcut/trunk
_svnmod=dvbcut
build() {
cd $startdir/src
svn co $_svntrunk --config-dir ./ -r $pkgver $_svnmod
cd $_svnmod
msg "SVN checkout done or server timeout"
msg "Starting make..."
make || return 1
# vim:syntax=sh
I then run makepkg PKGBUILD and let it do its thing
It ends with this...
scons: done building targets.
==> Removing info/doc files...
==> Compressing man pages...
==> Stripping debugging symbols from libraries...
==> Stripping symbols from binaries...
==> Generating .PKGINFO file...
==> Generating .FILELIST file...
tar: *: Cannot stat: No such file or directory
tar: Error exit delayed from previous errors
==> Compressing package...
tar: *: Cannot stat: No such file or directory
tar: Error exit delayed from previous errors
==> Finished making: dvbcut-svn (Sun Jan 21 19:08:28 UTC 2007)
I'm not sure what's causing this error message.
tar: *: Cannot stat: No such file or directory
tar: Error exit delayed from previous errors
I'll try installing it and see how it goes.

Dependency detection for simulation of models including ucb block(s)

Similar Messages

Maybe you are looking for