Dependent Certification - Plan Type

Hi,
Currently we are setting up the Dependent Certification in the Program Enrollment Requirements -> Dependent Coverage -> Plan Type -> Life Event Change..
I am determining the certification requirement using fast formula (Dependent Certification Required)
If we have 4 plan types and 2 certifications (ssn + birth certificate), the certification requirement records will be created for 4 plan types.
For example two dependent will be having 16 certification records.
I guess this will be a time consuming process to certify each dependent.
Will it cause any problem in the enrollment if we received the certifications for one plan type, no need to create certifications for other plan types by using fast formula or any workaround to avoid this?
Did someone come across this situation?
Thanks
Arun

user9228608 wrote:
Hi,
I just want to know the certification plan which make me disturb all the time,Information is authoratively available at http://certification.oracle.com and I suggest you take time to study it carefully. I see below you are doing that already which is good.
i have a plan to give paper of 1Z0-144-ENU. When i view this paper on oracle web page it gives information not need training to paper but my friends and Colleague is saying that oracle need training to this paper kindly advice me. Training required or not...??The Certification associated with 1z0-144 (Oracle PL/SQL Developer Certified Associate) does not require any training. You only have to pass 1z0-144 and 1z0-051 (or 1z0-007 or 1z0-047).
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=458&get_params=p_track_id:PLSQL
>
>
>
I have clear my essential paper need to plan 1Z0-548-ENU (Oracle E-Business Suite R12 Human Capital Management Essentials) either training required or not...??
Page: http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=458&get_params=p_track_id:EBSR12HCM indicates the Oracle E-Business Suite R12 Human Capital Management Certified Implementation Specialist only requires pass of 1z0-548, training is not mandatory
I have clear my sql paper 1Z0-007 need to plan paper 1Z0-144-EN (Oracle Database 11g: Program with PL/SQL) either training required or not ....??
See above.
>
Please advice.
ThanksIn all cases above training appears not to be currently required ( however Oracle do seem to suggest it will help)

Similar Messages

API to insert dependent certification records

Hello,
Is there any seeded API to load dependent certification records?
Requirement:
Customer maintaining spread sheet or Table that has dependent information and certification type and receipt date;
Is there any way to load these data into Oracle with out any manual intervention(life event process) ?
They would like to create dependent certification records and mark them as received and the enrollment should not be suspended but the future records can be processed with life events.
Thanks for your inputs.
Arun

Pl see if MOS Doc 391208.1 (Where Is Documentation on HRMS APIs Available ?) can help
HTH
Srini

Location aliases on Planning plan type

Hi.
We are going to use @XREF function over Planning plan types.
As I created a new Planning application, I noticed that location aliases have been automatically created ( RevCube, PnlCube, BsCube ): in fact, I can found them in HSP_CUBES table. Using Administration Console, I can find them also on databases; however passwords are not set.
I was wondering how to set password or change location alias name through Planning web pages.
Or I have to manually change it in HSP_CUBE table? However, by this way it seems that refreshing database through Planning Administration's menu does not change location aliases.
Thanks a lot

Hi,
The location aliases are created when you run a create from planning, the amount of location aliases that are created depends on the amount of plan types, it may look like there is no password but it has been set and is used.
You shouldn't need to change of the details.
Cheers
John
http://john-goodwin.blogspot.com/

How to create a macro for a planning type in MC8b transaction

Hi,
I am presently working for a product allocation demand, which have a information structiure with characteristic and key field.
the characteristic are production allocation quantity, incoming order quantity, and open order quantity.
i have created a planning type in which the data updation takes from the excel file to the planning type in mc95.
but i need to create a macro for this planning type .
can any body give the details information how to create a Macro for a planning type.
Thanks and regards
GopalKrishna

Dear Gopal
May be the link would be helpful to you.
[Planning Types and Macros|http://help.sap.com/saphelp_46c/helpdata/en/a5/631cc443a211d189410000e829fbbd/frameset.htm]
Drill down the left tab once you opened the link, for more information.
Thanks
G. Lakshmipathi

Benefits - Plan type for a particular infotype

In Benefits i want to see which plans are for a particular infotype
for ex savings, insurance etc.
like 1010,1020 1030 are for medical, 2010 2020 for insurance
3030 3040 for saving - where this info is stored, that this plan type is for this infotype
Edited by: Manu on Feb 8, 2011 5:24 PM

Hi,
For health plans, table is PA0167.
For insurance plans, table is PA0168.
For savings plans, table is PA0169.
For all of these, you can use SUBTY and PLTYP (should be the same).
You can also look at standard SAP report RPUBEN09 (transaction code HRBEN0009).
Hope this helps.
p.s. Please show some respect to people replying and maintain sanctity of the forum.
Donnie

New feature aso plan type under planning V11.1.2.3

HI all,
I notice than there new feature under planning.
the ability to create ASO plan type under planning.
but in documentation i don't understand if this part is not available under planning licence .
is this new feature involde to purchase new licence on essbase and in this case we have application user wich licence is needed (cpu) ?
can some one help?
on URL Introduction - Oracle EPM System 11.1.2.3 Documentation Library
extract of
Oracle Hyperion Planning New Features
HTML
Aggregate Storage Option Support
Administrators can now add an aggregate storage option (ASO) database to a Planning application using Planning application administration.
Administrators can create an ASO plan type during application creation, or they can add a new plan type using the new plan type editor. See Plan Type Editor. Write back to ASO cubes within Planning is supported.
Note:
To use ASO databases in Planning, you must have the required license.
on doc I
Oracle Enterprise Performance Management System Licensing Guide
PDF
Essbase Plus cannot be used to create Essbase cubes that do not
contain data used by the Hyperion Planning Plus application.
l The Aggregate Storage Option component of Essbase Plus may not
be used.

You also need the Essbase license to be able to use that functinality, probably best discussing with your Oracle account manager for the full details.
Cheers
John
http://john-goodwin.blogspot.com/

Can a Financial Plan Type be attached to more than one Project Template

We are working on Project Accounting through Self Service pages. For doing the Cost Budget we have created a Financial Plan Type. We attached it to a Time & Material Project. But later when we tried attaching it one more template, a Turnkey Template, it does not give us the Cost Budget-Financial Plan type in the drop down box.
Hence, wanted to know whether we can attach a Financial Plan Type to more than one Project Template??? If yes, then why didnt we get the option in the drop down box?
Chirag..

Since you are not using Company code as the branch, and are using Profit centre as the branch, I dont think its right for you to set a default profit centre for any GL account in the Chart of Account for that company.
all the SAP user in the company will be using the same company code to post, and thus, will be using exactly the same inventory account, if you set a default profit centre there, no point rite? You will need to implement a procedure to ask all the user to manually assign the profit centre during posting. Just like how we normally ask user to specify the company code before posting.
The authorisation should be set by profit centre as well. hope this helps. Thanks.

Aperture performs adjustments in a different order depending on file type

Aperture performs Adjustments in a different order depending on file type.
Here's an example:
Starting with two copies of an image, one in RAW format (Canon CRW from a D60), the other in TIFF (opened the .crw file in Preview and exported an 8bit tiff file).
{The test image is a photo of my copy of Aperture on the floor of my studio (which, for reference, is a few points of Cyan off of a neutral grey).}
The original Image.
http://members.arstechnica.com/x/adrien/testRAW_originalImage.jpg
Adjustments
http://members.arstechnica.com/x/adrien/adjustments.jpg
The RAW file adjusted
http://members.arstechnica.com/x/adrien/testRAW_adjusted.jpg
The TIFF files adjusted
http://members.arstechnica.com/x/adrien/testTIFF_adjusted.jpg
Import both of these files (testRAW.crw & testTIFF.tiff) into Aperture.
Make adjustments to the RAW and TIFF images:
- Exposure: Saturation -> 0 (lowest possible value).
- White Balance: Temp -> 3500K (from 5000K).
It doesn't matter what order you perform these operations in.
The RAW file is now a neutral greyscale image. With the Saturation set to 0, the White Balance makes no major difference in the image, it stays grey.
The TIFF file, however, is now a blue tinted greyscale image - much like a sepia-tone effect. Moving the White Balance slider changes the color of the image.
It appears that Aperture is performing the Saturation and WB operations in a different order: for the RAW file it first performs the WB, then the saturation; while in the TIFF file it performs the saturation first, then the WB.
The result is the same for a JPEG image.
The RAW behavior is the 'expected' behavior in photography - White Balance should happen 'before' the Saturation setting.
I've filed the bug with Apple (number 4394125 at bugreport.apple.com). hopefully they'll fix this.
Cross posted from this discussion at the MacAch on ArsTechnica forums:
http://episteme.arstechnica.com/groupee/forums/a/tpc/f/8300945231/m/893007866731 /r/832001796731#832001796731

Well, there are different ways of achieving this.
Solution 1:
You can create a new output type which will be triggered and call a same driver program and the new smart form. I am sure you can customize as to what Purchasing document type will trigger which output type. Get in touch with someone in the function team to get this configured.
Solution 2:
No Customizing, let the configuration be the same, but in the driver program change the value of "TNAPR-FONAM" immediately after the form entry_neu to the new form name based on the Purchasing document type.

How to create dynamic calc account in multi-plan type application

Hi expert,
I have a planning application with 3 plan types.
I created a calculation script which fixed on accounts in plan type 1 only and the calculation suppose to calculate a "dynamiccalc" account with a member formula attached. Everytime I run the script, it takes very long time and I found there are sessions at the back of essbase with "Process local xref/xwrite request" request to other plan types.
It does not has this kind of session if I change the account to "store".
Would like to check, is it possible to create a dynamic calc account to calculate for only 1 plan type in a multi-plan type application? Is there any special setting that I need to do to enable this? I already selected source plan type as Plan type 1 for my dynamic calc account. Please help!
Many thanks!!
My HP application is on version 11.1.2.1.

Hi Jake,
Thanks for pointing out the check box. Overlooked it and the checkbox was not unchecked, even I only wanted the account to exist in 1 of the plan type.
However, after I unchecked and refresh now, when I run the calc script, it still trigger process at the back to the other 2 plan types with "Process local xref/xwrite request" request. What else could I have missed?
I already added the "HSP_Nolink" UDA to all accounts in plan type 2 and plan type 3 and confirmed that there's no account with "Xref" member formula, I really don't know why it is trying to process local xref request. Can anyone help??
Many thanks!!!

VA02: protect a line in condition screen depending on a type condition

Hi all,
I need to protect a line in condition screen depending on a type condition
using the transaction VA02.
Does anybody know the user-exit to do this ?
I thank you in advance.
Best Regards.
Paolo

Hi,
I believe you cannot do it on condition basis...unless if you want to modify standard sap code.
In the condition type config V/06..In the "changes which can be made" section there is an input for manual entries...there you can give D to not allow to change the condition ...
Thanks
Naren

TYPE OR TABLE DEPENDENCY OF OBJECT TYPE (ORA-2303)

제품 : SQL*PLUS
작성날짜 : 2004-05-20
==================================================
TYPE OR TABLE DEPENDENCY OF OBJECT TYPE (ORA-2303)
==================================================
PURPOSE
Type이나 table의 dependency가 있는 type을 drop하거나 replace하고자
하면 ORA-02303 error가 난다. 이 error의 원인을 알아보도록 한다.
Explanation
Object의 attribute나 method를 수정하기 위해서는 object type을 drop하고 재생성
해야 한다. Type이나 table의 dependency가 있는 type을 drop하거나 replace하고자
하면 ORA-02303 error가 난다. Object type은 type (nested table 또는 VARRAY)
또는 object table로써 구체적으로 표현된다. 만약 data의 보존이 필요하다면
temporary table에 manual하게 옮겨놓아야 한다.
SQL Reference guide에 의하면 DROP TYPE FORCE 옵션은 recommend하지 않는다.
왜냐하면 이 옵션을 쓰게 되면 복구가 불가능하고 dependency가 있던 table들은
access하지 못하는 결과를 초래한다.
Example
아래의 query 1, 2, 3은 dependency을 확인하는 query문이다.
1. Find nested tables
select owner, parent_table_name, parent_table_column
from dba_nested_tables
where (table_type_owner, table_type_name) in
(select owner, type_name
from dba_coll_types
where elem_type_owner = '<typeOwner>'
and elem_type_name = '<typeName>');
2. Find VARRAYs
select owner, parent_table_name, parent_table_column
from dba_varrays
where (type_owner, type_name) in
(select owner, type_name
from dba_coll_types
where elem_type_owner = '<typeOwner>'
and elem_type_name = '<typeName');
3. Find object tables
select owner, table_name
from dba_object_tables
where table_type_owner = '<typeOwner>'
and table_type = '<typeName>'
and nested = 'NO';
Example ) Logon as Scott
/* Create an user defined object type */
SQL> create type object_type as object (
col1 number,
col2 varchar2(20))
Type created.
/* Create nested table type */
SQL> create type object_ntable as table of object_type
Type created.
/* Create varray type*/
SQL> create type object_varray as varray(5) of object_type
Type created.
/* Create parent table with nested table and varray */
SQL> create table master (
col1 number primary key,
col2_list object_ntable,
col3_list object_varray)
nested table col2_list store as master_col2
Table created.
/* Create object table */
SQL> create table object_table of object_type (col1 primary key)
object id primary key;
Table created.
ORA-2303 results if attempt to drop type with dependencies
SQL> drop type object_type;
drop type object_type
ERROR at line 1:
ORA-02303: cannot drop or replace a type with type or table dependents
위의 queery 1,2,3을 이용하여 object type dependency을 확인한다.
-- Find nested tables utilizing object type
SQL> select owner, parent_table_name, parent_table_column
from dba_nested_tables
where (table_type_owner, table_type_name) in
(select owner, type_name
from dba_coll_types
where elem_type_owner = 'SCOTT'
and elem_type_name = 'OBJECT_TYPE');
OWNER PARENT_TABLE_NAME PARENT_TABLE_COLUMN
SCOTT MASTER COL2_LIST
-- Find VARRAYs utilizing object type
SQL> select owner, parent_table_name, parent_table_column
from dba_varrays
where (type_owner, type_name) in
(select owner, type_name
from dba_coll_types
where elem_type_owner = 'SCOTT'
and elem_type_name = 'OBJECT_TYPE');
OWNER PARENT_TABLE_NAME PARENT_TABLE_COLUMN
SCOTT MASTER COL3_LIST
-- Find object tables
SQL> select owner, table_name
from dba_object_tables
where table_type_owner = 'SCOTT'
and table_type = 'OBJECT_TYPE'
and nested = 'NO';
OWNER TABLE_NAME
SCOTT OBJECT_TABLE
참고)
bulletin : 11576 처럼 utility을 이용하는 방법이 있다.
우리는 여기서 주의하여야 할 것은 script $ORACLE_HOME/rdbms/admin/utldtree.sql
을 내가 보고자 하는 user에서 돌려야 한다는 것이다.
$sqlplus scott/tiger
SQL> @$ORACLE_HOME/rdbms/admin/utldtree.sql
SQL> exec deptree_fill('TYPE','SCOTT','OBJECT_TYPE');
PL/SQL procedure successfully completed.
SQL> select * from ideptree;
DEPENDENCIES
TYPE SCOTT.OBJECT_TYPE
TYPE SCOTT.OBJECT_NTABLE
TABLE SCOTT.MASTER
TYPE SCOTT.OBJECT_VARRAY
TABLE SCOTT.MASTER
TABLE SCOTT.MASTER_COL2
TABLE SCOTT.OBJECT_TABLE
Reference Documents
Korean bulletin : 11576
<Note:69661.1>

Hi Carsten,
Thanks for the sharp hint. It works.
However, when I create a table using the schema, it gives me this error:
varray DOC."LISTOFASSIGNEDNUMBER"."ASSIGNEDNUMBER"
ERROR at line 14:
ORA-02337: not an object type column
Here is the script:
CREATE TABLE CUSTOMMANIFEST (
ID NUMBER PRIMARY KEY,
DOC sys.XMLTYPE
xmltype column doc
XMLSCHEMA "http://www.abc.com/cm.xsd"
element "CustomManifest"
varray DOC."LISTOFMANIFESTPORTINFO"."MANIFESTPORTINFO"
store as table MANIFESTPORTINFO_TABLE
(primary key (NESTED_TABLE_ID, ARRAY_INDEX))
organization index overflow
varray DOC."LISTOFASSIGNEDNUMBER"."ASSIGNEDNUMBER"
store as table ASSIGNEDNUMBER_TABLE
(primary key (NESTED_TABLE_ID, ARRAY_INDEX))
organization index overflow
LISTOFASSIGNEDNUMBER itself is complexType and not sure where is the error....
You may note there are more than two hierachy/levels...
Thanks.

Make changes to the line item depending upon doc type n sp. GL ind in F-48

I want to make changes to the line item depending upon the document type and special GL indication for the transaction code F-48.
Depending upon document type and special GL indicator i want to calculate the work contract tax during simulation in transaction code F-48.

Hi,
You want to deduct WCT when you use particular document type and special gl indicator.
I just want to know the reason why you want to determine the WCT based on the above conditions.
I created WCT as withholding tax types and assigned to vendor master. So when the user booking transactions he will choose the respective WCT tax type and tax code so system will deduct the amount and the same updated in WITH_ITEM.
Or you made a down payment request through T.code F-47 and when you want to book the actual transaction in F-48 then choose line item from down payment request.
Give me your requirement in clear if the above is not clear
Regards,
Sankar

Monthly purchase value,depending on condition type used.

Can we search for PO,depending on condition type used in the PO.eg. we are using a condition ZENT for entry tax and
the requirement is to search the po containing that ZENT condition.In dynamic selection mode there is condition group in
purchase order detail,but it is not selecting the required PO.please guide.

Hi,
This requirement is not possible in std SAP Report.
You need to develop a Z report with the help of ABAPers.
Give proper logic for them for creating this req.
Regards,
Rahul

Error validating business rules containing variable from another plan type.

We have created few business rules in in plan type "Plan1" which we are using variable from plan type "Capex". This is how we are using it.
"(@XREF(cpx,"Intangible Assets Finite, Gross","Unspecified","No Project","Information Technology (IT)","371064911-01"))"
But when we validate this rule it gives the following error
"An error occurred in: Rule:IFLJAN13.Plan1.B - Trail Balance - Capex
A validation error was received from the Planning server 'http://hptstorg:8300/HyperionPlanning/servlet/HspAppManagerServlet?appname=IFLJAN13'.
'Error:The member 'Unspecified' cannot be found.
The member 'Unspecified' cannot be found.
The member 'Intangible Assets' cannot be found.
The member 'Unspecified' cannot be found.
The member 'Unspecified' cannot be found. Rule IFLJAN13.Plan1.B - Trail Balance - Capex'."
We have checked the location aliases using EAS Console and they are correct.

Could you pls. check if you can see your BR in the location for the cube where you are unable to validate the rule?! (EAS console --> Administration --> Locations --> (right click) open)
your user must be able to "validate or launch" the rule in this location (changeable with "Add Access Privileges") and the rule itself must be able to launch in this location (changeable with "Add rules").
Kind regards
André

One BR to copy data in two plan type

Hi, I encountered this problem with the business rules.
In order to run the what-if scenario analysis, I would like to be able to copy the data from one version to another version using a business rule. However, currently I have two plan type within one planning application. And I have to use two business rules (with run-time prompt) to make the data copy. The run-time prompt for the 2 BRs are the same, for example, same entity, samel copy-from version, and same copy-to version.
I would like the users to just run one business rules (or maybe a sequence) with one set of RTPs to choose, and it allows them to copy both plan type. I have tried to use the sequence, but it seems that the sequence would require the 2 sets of RTPs to be input.
Any advice is appreciated.
THANKS

Alp,
Yes. I have tried to use the global variables, with the BR sequence. However, since the two BRs are for two different plan type (essbase cubes), when I choose the merge variable option, it did merge the global variable, and also limit the database name selection to one. (I can not choose the "hide" for the database).
Any other suggestion?
Thanks

Dependent Certification - Plan Type

Similar Messages

Maybe you are looking for