Deployed Baseline Not Using Latest Config Item Revision

I have made sure that the baseline is set to use latest revision, and even redeployed the baseline to some test machines, but they all still show and old revision.
I have deployed another baseline with the same behavior. In both cases the initial revision is the one listed.
Can anyone explain why?
We are on 2012 SP1 CU4.
Cheers

Hi,
Have you tried to remove the old deployment, wait for the baseline disappear from the client? Then re-deploy the baseline.
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Hi Joyce, Yes i have just tried that.
I think the issue was due to my misunderstanding: The default views for Configuration Items and Configuration Baselines; only Configuration Item's show Revision in the displayed fields. I now realise that Configuration Baselines also have Revision numbers
in the DB, and that the Revision displayed in the Client control panel applet refers to the Configuration Baseline and not the Configuration items. I could not tell as they were both the same until a made a change to the CB and the number changed.
I think this is very misleading behaviour: If I change a CI, the revision of the CB is NOT changed. This seems totally nonsensical when you consider that simply changing the name of the CB increments the revision??
There is no way on a client machine using the control panel applet to determine if the revised CI has been downloaded or not and the compliance results you are seeing . You can obviously run a machine policy eval, but without checking the logs you don't
know for sure.

Similar Messages

Cache does not show all config items

SXI_CACHE is not showing all my config items.
When looking at SXI_CACHE, I noticed that only the config items pertaining to actual SAP services (Business Systems) seem to show up?? Is this normal? I've refreshed the cache (both delta, and full).
Also, when I double-click on Services, all the services show up, but the ones that are not actual SAP systems have an 'X' in the 'Flag' column ("Event has occurred") What does that mean?
Background:
We are in the prototype stage; I am the only one in the box. I created a simple File-BAPI scenario just to demonstrate that things worked. For the last couple months, the comm channel was set to Inactive. Attempted to reActivate the comm channel to get back in to it, and it's not working. I've double-checked everything I can think of, from the obvious (is there a file to be pulled), to the not-so-obvious (was the scenario changed by someone else in my absence).
Also, there are not sender agreements listed in SXI_CACHE?
Thanks in advance,
Brian

Actually, I wasn't using Business Service, I was using Business Systems from the SLD as Services without Party.
However, I just created a Business Service, filled in the Inbound and Outbound Interfaces, created Comm Channels, RD, ID, SA, RA, and activated all - still no luck. This time, some of the pieces DO show up in the cache. The ID, RA, and the Receiver CC show up in the cache, the RD, SA, and the Sender CC do not.
This has got to be a cache problem. We are using a VERY old and slow machine to run XI on. Each time I activate something in the DR or CD, I have to go to SXI_CACHE and Start Delta Refresh. I'm thinking there may be a timeout setting or something. What's frustrating is that it used to work just fine.
Any other cache related ideas?
***EDIT - just rechecked - getting messages from newly created Business Service, but they are failing in mapping....I guess I need to delete and recreate everything and try again. Maybe that will clear up the cache issue....
Message was edited by: Brian Vanderwiel

Orion-ejb-jar.xml is overwritten every deployment and not using from .jar

My application is an ear file containing a single jar and a war.
My configuration looks like:
/applications/<appname>/myejbs.jar
within myejbs.jar, exists meta-inf\orion-ejb-jar.xml
Every time I redeploy (copy .ear into /applications and restart server) a version of orion-ejb-jar.xml is copied into /application-deployments/myejbs/orion-ejb-jar.xml but it is not the version that I bundle within my jar. It appears this is the auto-generated version.
Why is this file being overwritten? I thought it should detect if a version of orion-ejb-jar already exists and leave it intact if so. Is there a config setting I've missed somewhere?

Well, we had the some problem.
We solved it when we wrote in the orion-ejb-jar.xml deployment version for actual oc4j.
example orion-ejb-jar.xml for oc4j 904:
<orion-ejb-jar deployment-version="9.0.4.0.0">
or
<orion-ejb-jar deployment-version="1.5.0">
example orion-ejb-jar.xml for oc4j 903:
<orion-ejb-jar deployment-version="9.0.3.0.0">
Zajo

Page appeared on closing my browser claiming that I am not using latest version, am using version 30 may be phishing scam

see above

It sounds like phishing. Does this occur every time or could it have been a pop-under page from a random site that doesn't necessarily indicate anything persistent on your computer?
One of your extensions has been said to often be bundled with other software, so you might check the Windows Control Panel, Add/Remove Programs, to see whether anything unexpected is found there. Click the "Installed on" column heading to group by date, which is helpful in spotting bundle items.
If you notice any other strange symptoms, see our support article for suggested scanning/cleaning tools: [[Troubleshoot Firefox issues caused by malware]].

Query to get Item revision Mismatch

Dear Guru's,
Need your help. I am looking for a queryo get those below details.
1) Need a query which should give item revisions which are not match with 2 orgs. Ex:: We have two orgs p001 & P002 and we are seeing few item revision is same for p001 & p002 and few items are not matching with p001 item revisions. Please help me to prepare a query which will give the mismatch item details along with item revisions.
--> in P001 the item revision is 0, 001, 002 & 003
--> In P002 the item revision is only 0.
i need those mismatc records where the item revision does not match with p001 to p002 item revisions.
Thanks in advance for the help.
Regards,
SSP

Hi ,
This?? This is the Sample one or other wise give me sample data scripts create & insert commands or post in SQL and PLSQL Forum
SELECT A.* FROM sampl_table A
WHERE EXISTS (
    SELECT 1 FROM sampl_table B
    WHERE A.item_id = B.item_id
    AND ....
AND NOT EXISTS (
    SELECT 2 FROM sampl_table B
    WHERE A.item_id = B.item_id
    AND A.SDAY = B.SDAY
    AND .....
or you use Joins

When using time machine with external hardrive to backup, some music items from iTunes and some photos from iPhoto do not transfer to backup hardrive. What am I ding wrong? Using latest version of mountain lion.

When I use time machine with my external harddrive to back up computer, some music from iTunes library, and some photos from iPhoto library are missing when I check backup disk. I am using latest version of mountain lion. Am I doing something wrong?

First, Time Machine doesn't completely back up the iPhoto library while iPhoto is running. Make sure you quit iPhoto after making any changes to allow a backup to take place.
This simple procedure will clear your Time Machine settings, including both overt and hidden exclusions. If you have a long exclusion list that can't be recreated easily, you may prefer a more complicated procedure that preserves the exclusion list. In that case, ask for instructions. Otherwise, do as follows.
Triple-click the line below to select it:
/Library/Preferences/com.apple.TimeMachine.plist
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu. A Finder window should open with a file selected. Copy it to the Desktop. Then move it (the original, not the copy) to the Trash. You'll be prompted for your administrator password. Reboot, recreate your settings in the Time Machine preference pane, and run a backup to test. If TM now performs as expected, delete the file you copied to the Desktop.

1st sync of iCal to new 4S went OK. Now new items added on phone not showing up on iCal on Mac. Not using iCloud

The first time I synced my new 4S I was getting duplicate calenders showing up. I deleted all the calenders on my iPhone and picked replace items on my iPhone with items on my computer for iCal. That worked and I got them synced. Now when I sync, my calender on my computer does not get the changed items from my iPhone. I am not using iCloud just syncing with cable in iTunes.

I just had the identical experience. Both laptop and desktop have the same prefs set from within iCal to sync my calendars and address books. I've synced (sunked?) three or four times now, it appears to be working, but when all is said and done I am left with totally blank calendar on my desktop unit. Both have the latest Leopard upgrades. I also selected "merge all data" when prompted.
What gives?

SSIS - Change Config File Path LOCATION in SQL Agent Job Step (NOT USING DTEXEC)

SSISers;
I am not new to ssis but am trying to deal with promoting of ssis config files differently for a specific project. We are using SQL 2008 R2.
As a standared pattern used for years, we just use SQL Agent, build a job step for the ssis package, add the ssis package as SQL Integration Services Package type from fileshare (not using Integration Services), and add the necessary production
config files in the configutation tab of the job step. Easy. We do not execute our packages with DTEXEC command line.
A new project has the developers leaving the config files in the package - not removing the config files for deployment. Is there a way to override JUST THE CONFIG FILE PATH LOCATION in the job step for ssis package? Remember, we are NOT using dtexec.
I was told that /SET might do it but I do not see a good example anywhere of hooking this in and how it works for a CONFIG FILE PATH LOCATION - I see variable overrides but not CONFIG FILE PATH LOCATION. The packages were written with Absolute config file
path and not Relative path.
Please understand that my goal is to let them leave the packages as is, we move the config files to the production sever and all we have to do is flip the location of where the config files are sitting for the ssis pacakge to look for them. We would
rather NOT have to use DTEXEC command line with the job step for reasons that I do no need to get into on this forum.
Any suggestions are appreciated.

Hi mg30,
There is no way to overwrite the XML configurations file just through modifying the SQL Server Agent job steps. The Dtexec utility will apply the default package configurations for the second time after applying the options specified in the command
lines or other package configurations configured in the job step.
If the package is not deployed/installed, the Dtexec utility looks for the XML configurations file according to the file path defined in the Package Configurations Organizer window. In this situation, you need to either disable the package configurations
or modify the XML file path in the BIDS.
If the package is already deployed/installed, you need to modify the package as above or re-specify the install folder for the package configurations file.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

LMS 3.2 Config Editor : Config deployment is Not Attempted

Hello gurus,
Using config editor in LMS 3.2, I'm trying to deploy a config, that was previously saved to the "public configs", to a device (overwrite to startup-config).
The job ends "Successfully", but looking at the detail, the deployment was "Not Attempted". Last time I used this function, I was running LMS 3.1, but we've since migrated to 3.2 it doesn't seem to work.
What logs can I look at to find out why the deployment was "Not Attempted" ?
Many thanks,
Alex.

Can you do the following?
Please enable DEBUG for these modules
Step 1: RME -> Admin -> System Preferences -> Loglevel settings
Config Editor
Config Job
NetConfig
Step 2: Attach these logs:
CSCOpx/log/CfgEdit.log
CSCOpx/log/dcmaservice.log
CSCOpx/log/dcmaclient.log
CSCOpx/files/rme/jobs/ConfigEditorJob/
CSCOpx/files/rme/jobs/NetConfigJob/
And include a screenshot as well and attach the logs from above steps.

[svn:bz-trunk] 17920: Fix for WebLogic: WebLogic does not provide File IO on the deployed artifacts hence using getResourceAsStream .

Revision: 17920
Revision: 17920
Author:   [email protected]
Date:     2010-09-29 05:56:06 -0700 (Wed, 29 Sep 2010)
Log Message:
Fix for WebLogic: WebLogic does not provide File IO on the deployed artifacts hence using getResourceAsStream.
Modified Paths:
    blazeds/trunk/apps/samples/WEB-INF/src/flex/samples/marketdata/Portfolio.java

check the server log;
/app/oracle/product/fwm11g/user_projects/domains/fwm_domain/servers/AdminServer/logs/AdminServer.log
you can launch the console and see if it is running; http://<server>:<port>/console

Deployed Configuration Baseline not showing on clients

I have created 6 CI and 6 CB
each only differ by the digit they scan for in the registry.
They all check the integer of a registry value we have created on all servers.
HKLM\SYSTEM\AHS\Patching The value is PatchWindow and the Integer is a number between 1 and 6
The compliance rules are basically Value PatchWindow=1
They are NOT set to remediate.
They have been deployed to the All Systems collection
I have used the deployment to create a Dynamic collection based on compliance. so each server should check compliance of all 6 baselines. Say the value is 1 dynamically assigned to DynCol1, but next month that value is changed to 3 by request
of client and their schedule. the daily compliance eval will catch that and then it will be assigned to DynCol3 automatically based on the query.
My problem is, when i go to ANY client i do not see the baselines under the configuration tab. i have tried to force the client check-in using Machine Policy Retrieval & Evaluation Cycle.
What can be done to resolve the issue of not seeing the deployed baseline configurations so my servers can actually evaluate that registry setting.
Cody Fawcett

Can the servers get the other policies from MP?
Juke Chou
TechNet Community Support

Dynamic Action, validation check, on an Item, could not use Change event

I am learning how to use Dynamic Actions in a 3.2.x app that was upgraded to 4.0.x. I wanted to share what I learned adding client side validation with these actions. Perhaps an Apex guru could suggest an easier method to use this feature.
I have an existing function where a user selects multiple rows in a report page, and then assigns a single status and enters justification text for the selected rows in another page, then saves changes (via submit).
One item, justification, is required. I replaced my JavaScript validation of an empty value, e.g., P10_JUSTIFICATION.value, with a dynamic action. The Change event was a candidate for this item, with the "is not null" Condition. However, it is possible to initiate this screen to review the status, overlook the justification text and immediately select a button to save changes. No Change event has fired. The Before Page Submit event was applicable here. This Event selection in the wizard does not provide the Item for definition and then the Condition wasn't the right context though available for selection. I selected JavaScript expression for the Condition, actually entered my original JS test expression, and created one True Action. The True action displays an Alert to tell the user that required text is missing.
Test of this DA was not completely successful. The alert appeared but the page went on to submit anyway. I found I had to add another True Action, Cancel Event, to stop the submit. The DA was then successful.
The Apex site examples, [http://st-curriculum.oracle.com/obe/db/apex/r40/apexdynactions/apexdynactions_ll.htm] , do a great job showing use of Change and Set Value events for Items but a user may not always navigate through items. These features were promoted for developers with no to little knowledge of JavaScript to use Apex for application development. This DA required using/understanding JS anyways.
My next step is to implement actions on a tabular form that that has required values. It is disconcerting that I have read in the forum that the column value references such as f0x and its row number are required to get it all working (as a DOM or JQuery selector). I have already found that tabular form columns can be re-ordered from v3.2.1 to 4.0.x. I was hoping I could declare dynamic actions or simpler Javascript methods that would not rely on f0x array references.
Thanks,
Kelly

It is disconcerting that I have read in the forum that the column value references such as f0x and its row number are required to get it all working (as a DOM or JQuery selector).Not necessarily. One possibility is to use descendent jQuery selectors to attach the dynamic action event handler by column heading:
td[headers="HIREDATE"] input

SQL Agent Job failing - not using credentials in the config file for Data source

Hi
We have an SSIS pkg, that is secheduled as SQL Agent job using proxy account. The pkg contanins data source for connecting different SQL servers and the proxy account do not have access to the external DBs. The data source credentials are stored in the Config
file.
Why the job is not using the credentials in the config file and try to use the proxy account and failing.
Do the proxy account need access to all the external dbs in the pkg, and then what is the purpose of the config file.
I am sorry, i am not SSIS person trying to understand. If any one can explain tha will be great!!
Thank you!
VR

Please take a look at these URLs:
Schedule a Package by using SQL Server Agent
SSIS package does not run when called from a SQL Server Agent job step
Cheers,
Saeid Hasani
Database Consultant
Please feel free to contact me at [email protected] as well as on Twitter and Facebook.
[My Writings on TechNet Wiki] [T-SQL Blog] [Curah!]
[Twitter] [Facebook] [Email]

I have installed firefox 8.0.1. When I start firefox up it says I have the latest version, but simultaneously there is a warning saying that I do not use the latest version?.

When I click the firefox icon it tells me that I have firefox 8.0.1.Under is written Firefox-is-up-to-date (shadow line) It also mentions that I use the release-update channel.
When i start firefox there is a warning that I do not use the latest version

This - http://www.google.com/firefox - is the old Firefox Start Page used by the Firefox 3.6 and earlier versions of Firefox, I don't think it is being maintained by Google.
Starting with the Firefox 4 version, Firefox is using a "local" Start Page with the address of '''about:home'''. It looks similar to the old Start Page, but it isn't exactly the same.

I run a Windows 8.1 - Photoshop CS5 under Parallels on an iMac one year old and both having the latest OS. I use a NIK plugin "VIVEZA" which run fine for years without a problem. Latelt and without a reason, the NIK plugin has gone corrupt, (can not use

@I run a Windows 8.1 - Photoshop CS5 under Parallels on an iMac one year old and both having the latest OS. I use a NIK plugin "VIVEZA" which run fine for years without a problem. Latelt and without a reason, the NIK plugin has gone corrupt, (can not use it more the 2 corrections after a get a black background message that there is not enough memory) and the system stops running and a must restart is required. How do I fix this terrible problem?
If it requires a Photoshop CS5 re-install, (I belief that it may fix the problem) and re-install the two third party plugins (NIK Viveza) and (Onone Perfect Resize) how and where do I get to the proper Adobe upload page to do that.
I have tried to fix this problem by changing the memory allocations, I have spend many hours on it and are very disgusted with it but it needs to be fixed. The current memory settings are;
Ram available = 1588 MB
Range = 873 -1143 MB
Recommended Photoshop usage range = 857 however I have tried every setting to max and in between. Nothing works. Current setting = 1588 (max)
The Photoshop I use is registered, I have product # and order # .

Contact NIK for updated/upgraded versions of their plug-ins. They have been having a lot of issues with their plug-ins.

Deployed Baseline Not Using Latest Config Item Revision

Similar Messages

Maybe you are looking for