Deploying Objects in the Target Warehouse , The job just hanging there!!

I just try to run through the Oracle Warehouse Builder 11g tutorial, I did every steps as the tutorial did and everything was good until I try to deploy the objects,
When I set the objects' action from "none" to "create", then hit the "deploy" button, the job's status just stop at "running" phase with no errors and no warings.
I try to deactive all execution and re-deploy it again, still the same problem..
Anyone knows what's going on with this situation??

Hi David,
nothing I can deploy in the control center. I looked into the log files in the server-side.
The error is "Invalid username/password..... why is that?
2009/01/13-11:47:22-PST [110FE28][] AuditId=362: Processing unit deployment request
2009/01/13-11:47:22-PST [110FE28][] Free Memory(bytes)=940816 Total Memory(bytes)=3457024 Used Memory(bytes)=2516208 Used Memory(percent)=73%
2009/01/13-11:47:22-PST [110FE28][] [REP_OWNER.MY_WORKSPACE] Processing Audit ID 362
2009/01/13-11:47:22-PST [3C9C31][] Thread terminating due to fatal exception of type oracle.wh.runtime.platform.adapter.InfrastructureException
2009/01/13-11:47:22-PST [3C9C31][] oracle.wh.runtime.platform.adapter.InfrastructureException: RPE-01003: An infrastructure condition prevented the request from completing.
- ORA-01017: invalid username/password; logon denied
     at oracle.wh.runtime.platform.service.controller.PlatformDb.connect(PlatformDb.java:90)
     at oracle.wh.runtime.platform.service.DeploymentManager.run(DeploymentManager.java:34)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.sql.SQLException: ORA-01017: invalid username/password; logon denied
     at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
     at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:110)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:171)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:406)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:399)
     at oracle.jdbc.driver.T4CTTIoauthenticate.receiveOauth(T4CTTIoauthenticate.java:794)
     at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:391)
     at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:490)
     at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:202)
     at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:33)
     at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:465)
     at java.sql.DriverManager.getConnection(DriverManager.java:525)
     at java.sql.DriverManager.getConnection(DriverManager.java:140)
     at oracle.wh.runtime.platform.common.DatabaseConnectionFactory.connectUsingNVP(DatabaseConnectionFactory.java:524)
     at oracle.wh.runtime.platform.common.DatabaseConnectionFactory.openUsingNVP(DatabaseConnectionFactory.java:579)
     at oracle.wh.runtime.platform.service.controller.PlatformDb.connect(PlatformDb.java:84)
     ... 2 more
java.sql.SQLException: ORA-01017: invalid username/password; logon denied
     at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
     at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:110)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:171)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:406)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:399)
     at oracle.jdbc.driver.T4CTTIoauthenticate.receiveOauth(T4CTTIoauthenticate.java:794)
     at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:391)
     at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:490)
     at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:202)
     at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:33)
     at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:465)
     at java.sql.DriverManager.getConnection(DriverManager.java:525)
     at java.sql.DriverManager.getConnection(DriverManager.java:140)
     at oracle.wh.runtime.platform.common.DatabaseConnectionFactory.connectUsingNVP(DatabaseConnectionFactory.java:524)
     at oracle.wh.runtime.platform.common.DatabaseConnectionFactory.openUsingNVP(DatabaseConnectionFactory.java:579)
     at oracle.wh.runtime.platform.service.controller.PlatformDb.connect(PlatformDb.java:84)
     at oracle.wh.runtime.platform.service.DeploymentManager.run(DeploymentManager.java:34)
     at java.lang.Thread.run(Thread.java:595)
Thanks
Joe
Edited by: Joe Lee on Jan 13, 2009 11:48 AM

Similar Messages

I am trying to download iOS 5.1 on my iPhone and iPad. Both times it tries connecting to the software update server and just hangs there. I've tried doing both over wifi and get error message. What do I do?

I cannot download the ios 5.1. I'v tried doing it through itunes after downloading the latest itunes. It says that my phone and ipad both have new updates and tries to coonect to update software server. That is where it hangs up and just keeps trying to connect but never does. Then when I try to update my devices over wifi, it tries and thens gives me a download failed message after a few minutes. What do I do?

This has solved loads of people who have this issue and have used an alternate DNS setting. Below are instructions for both iPhone OTA and on you Mac
If you are getting the error message "Unable to check for update" when you try an OTA (over the air update)
Change DNS Servers
Settings -> Wi-Fi
Click the blue arrow on your connected network
Delete everything in DNS and replace it with 208.67.222.222, 208.67.220.220
Try again
If this works, you will probably want to remove the WiFi network using "Forget This Network" and then reconnect to it to get your original DNS servers back. Alternatively, make a note of the original DNS servers before deleting them and replace it after you are done.
If you are getting the error message "Unable to check for update" when you try through iTunes
On your Mac
Choose Apple menu > System Preferences, and then click Network.
Select the network connection service you want to use (such as Wi-Fi or Ethernet, unless you named it something else) from the list, and then click Advanced.
Click DNS, and then click Add at the bottom of the DNS Servers list. Enter the IPv4 address for the DNS server.
You can use OpenDNS
208.67.222.222
208.67.220.220
or
You can Google Public DNS if you want
8.8.8.8
8.8.4.4
I have actually repointed my routers DNS so all my devices now point to OpenDNS servers

The Remote Desktop Connection Broker server could not enumerate the targets for the provider named NULL from the database.

When I try to install Connection Broker on a Windows 2012 R2 Server in a Windows 2003 domain I get this error:
The Remote Desktop Connection Broker server could not enumerate the targets for the provider named NULL from the database.
Pooled virtual desktop collection name: NULL
Error: Logon to the database failed.
I have added both the Connection Broker server and the 2 remote desktop servers (also Windows 2012 R2 Servers) to the "Windows Authorization Access Group" in the domain according to this: http://support.microsoft.com/kb/331951
But it still does not work :-(
I keep getting same error....
Any idea what I might be missing ?

Hi,
Thank you for posting in Windows Server Forum.
Firstly please let us know by which method you have setup RDS role. You can have more advantage and feature when you will install with Standard deployment instead of Quick start deployment. So if you have setup with quick start option then you can try installing
with standard type and check the result.
In addition, please check SQL server database is properly configured for RDS server. Also check that domain controller properly communicates. Kindly go through below thread for more information.
Server 2012 RDS - Remote
Desktop Connection Broker Client failed to redirect the user domain\username. Error: NULL
Hope it helps!
Thanks.
Dharmesh Solanki

Can I fade out the targets in the Design mode?

I did put some triggers and targets from the tooltip widgets on my site. How can I make the targets disappear in the Design mode??? Of course they are gone in the Preview mode, but hey disturb me very much in the Designe mode, cause I can't see anything behind.

Hello,
Disable the option shown in this screenshot: http://jingsite.businesscatalyst.com/jing/2013-10-18_2304.png
Cheers
Parikshit

Given an alias created by the Finder, from the Unix prompt (e.g., in Terminal) how can I get the target of the alias?

In my Finder windows I have numerous aliases that point mostly to other folders. When in the Terminal, these aliases present as regular files. How can I get the target of an alias so that I can perform some operation, e.g., "cd", on the target?

This AppleScript demonstrates how to resolve the OS X alias and return a POSIX path for it
set af to choose file
tell application "Finder"
if the kind of af is "alias" then
set origFile to the POSIX path of ((original item of af) as text)
end if
end tell
display dialog origFile

I am not able to send Photos via email any longer. I am able to send emails but if I try to send a photo attached it just hangs there in the outbox. I have tried the various options to re-boot ?

I hope someone can help with this
I am now unable to send any photos from my iPad2, When I got this last December it worked fine and I could easily take a picture and send it.
About a month ago I tried it and it and it failed, I was abroad and did not think it was a problem?
Although I have not changed anything to my set up outhe than automatic software upgrades on the iPad it refuses to work.
I can send emails without photos and tried rebooting and re setting the internet connection,
The email just sits in the outbox and I get the following message?
connection to the outgoing server "smtp. gmail.com" failed
Any help or suggestions would be appreciated Thanks

Thanks for replying and your time.
Unfortunately no rebuild option in iphone 3gs

I am running 4.0 version, and each time I open Firefox, I get a software update that says "Downloading Firefox / connecting to the update server", but it just STICKS there??? Why is this happening?

I am running Firefox 4.0 version, but for some reason, it tries to download updates and then gets stuck on trying to connect to the update server. This has been happening the past few days. When I close the update, I can proceed in Firefox without incident (that I know of).

See:
* http://kb.mozillazine.org/Software_Update (Software Update not working properly)
Remove the files in the updates and updates\0 folder.<br />
You may need to delete active-update.xml and updates.xml as well if present.
C:\Documents and Settings\<user>\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates
(%USERPROFILE%\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox)
If you have problems with updating then easiest is to download the full version and uninstall the currently installed version and remove the Firefox program folder to do a clean install of the new version.
* Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Do not remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

I downloaded the newest version of iTunes, and now I cannot open the iTunes store. It just sits there and says it's loading for hours, but does nothing.

I downloaded the most recent version of iTunes, and now the iTunes store won't open. It just sits there and says 'accessing iTunes store for hours, but does nothing.

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START>PROGRAMS>ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START>PROGRAMS>ACCESSORIES>Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Firefox 10 Crashes occassionally when clicking on a picture on facebook that loads the new popup. Firefox just hangs and becomes unresponsive. Is there a fix for this?

When u click on a picture that loads the popup that Facebook has recently introduced on occasion Firefox just hangs and becomes unresponsive and has to be closed by using task manager. It doesn't happen every time say for every 2 out of 10.
This is what the error report says....
Description:
A problem caused this program to stop interacting with Windows.
Problem signature:
Problem Event Name: AppHangB1
Application Name: firefox.exe
Application Version: 10.0.0.4411
Application Timestamp: 4f2548ce
Hang Signature: 4813
Hang Type: 0
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 2057
Additional Hang Signature 1: 4813d58d219b01045ae1404b21f04466
Additional Hang Signature 2: ec05
Additional Hang Signature 3: ec057c79f467a3033cec4ebe11500204
Additional Hang Signature 4: 4813
Additional Hang Signature 5: 4813d58d219b01045ae1404b21f04466
Additional Hang Signature 6: ec05
Additional Hang Signature 7: ec057c79f467a3033cec4ebe11500204

-> Provide your Crash IDs by using the suggestions mentioned in the following article:
* [[Firefox crashes#w_get-help-fixing-this-crash|Get help fixing this Crash]]

TS1702 I have bought the game "Dress Up Rush HD" and after downloading the application and wants to play it just hang there after I press play. Please advise

Hi
Can anybody advise me? I have bought the game "Dress Up Rush HD" and after downloading the game and ready to play, it just hung there.

My music can be played in my iMac and iPad itunes, but not my iPhone4.
i did what you have suggested to unsync the music and then re-sync again. should i try to cancel all the music in the library and then restore them again. can it work? i dont want to bet coz reloading so much music is very trouble.

HP LaserColor 3550 : printing jobs just hang for no apparent reason

On an iMac G5 I administer at work an HP Laser Color 3550 was recently installed by a professional from the store. It did one printing job just to please the technician and then, later, when someone else tried to print, the job just hung! I should perhaps add that it's a multi-account machine which I administer but personally don't use, apart from checking it out.
I spent a long time deleting and re-adding the printer in Printer Setup and repairing permissions.
I installed and reinstalled the driver and HP toolbox from the HP site and, when I realised that no extra installation was in fact required in Tiger, became worried that my having done this installation was what was causing the problem.
I also used Printer Setup Repair to repair specific permissions. This came up with a message saying a CUPS file was missing which it couldn't repair (sorry, I didn't note the detail and I'm not on the same machine at the moment).
I've read some of the posts here with look-alike problems and noted down the steps that Greg Sahli has recommended. But I'm wondering whether I shouldn't go directly to a Combi re-update?
I'd be very grateful for any help!
Mike
imac G5 2mgz Mac OS X (10.4.3)
imac G3 600

Mr or Ms Light,
No, I don't think it's an OS problem. Printing on the Mac is nightmarishly complicated (under the hood), and HP installs its own system that bypasses the default FreeBSD system. This is an occasional problem with my HP 5550. HP claims to have good user support.
I've had, regularly, the exact symptoms. I've a migraine now, so I can't remember what I do about it. But it would be typical of me to press the printer button off, then clear the queue, then turn on the printer and have it remove the paper still in it. If needed, I might restart the computer.
As for the cause, for the last 10 minutes I've been asking my 4-year old granddaughter, but she's not in the mood to tell me. However, she often prints pictures of Elmo off the internet to color, and she captures parts of screens and prints them. This is with the USB cable disconnected; and its when I reconnect it, the exact symptoms you describe occur.
Try the above, and I may be able to give you a definitive answer later, after my granddaughter's nap.
Bruce

How to show the target of the events

In the Activity Sequence there's a list of functions and usually one of them is "enterFrame" or "render". Is there a way to see who's creating that event?

What about other events? In this image I know that the event, "applicationComplete" was dispatched by the Application instance but other events I would like to know who is dispatching these events. I mean I would like to see who is the event.currentTarget or event.target that has created the event.

My ipod touch keeps turning the volume down by its self and when i try to turn it back up it wont let me also when the sound is off the speaker that comes up when you turn it on down on the screen wont go it just stays there it doesn't go!Any ideas why?

I got my ipod for christmas this year its the 4th generation.It keeps turning the volume down by its self,when i try to turn it up it does not work. It wont let me i dont know why so i cannot play music on my ipod which defeates the reason i got it.Also when it turns the volume down its self or i on the rare occasion that the volume works and i turn it down the speaker comes up and will not go.It stays there which is making my ipod difficult to use.Its been doing this for about a week now.I used it alot and i feel lost without it haha. Does anyone know why its doing this? Or a way i can fix it? I've cheaked for updates and there is none!
Thankyouuu
it looks like that when it is locked and when its unlocked it looks like this

Have you checked the volume button? It might be physically stuck. To determine whether a hardware repair is needed, you need to follow these steps:
1. Try doing a hard reset:
Press and hold both the Home button and the Sleep/wake button simultaneously for about 15 seconds and release when the Apple logo appears.
After that: test the device to see whether the issue is solved.
2. If the issue is not solved, you should backup the device and restore it as new.
In that case, use: http://support.apple.com/kb/HT4137
NB: set up as a NEW device because a software issue will be in the backup.
If the issue persists after restoring as new, you should offer the device for service.
If you get specific error messages/codes in iTunes when updating/restoring, check this: http://support.apple.com/kb/ts3694 for causes and solutions
Good luck
Stijn

HT1947 Home sharing doesn't work. I tried all the items in the troubleshooting section. It just sits there and says turn on home sharing in itunes in the remote app. It's on. Connecting to a library doesn't work either because my phone doesn't show up on

Iphone 5. Anything else I can try? Itunes and iphone and the app are all up to date.

I brought my macbook air at home, everything worked perfectly: iPhone, iPad and Apple TV can connect. So basically I guessed that the issue was coming from the iMac, something preventing it to be discovered. I've checked the bonjour broadcasting and oh, surprise, the iMac wasn't broadcasting... Weird because it's a setup from a Time Machine, the environment I am running currently on the macbook air.
Anyway, if this can help someone else:
I've ran:
ps aux | grep mDNS
and saw that for the iMac the daemon was launched with the argument -NoMulticastAdvertisements.
I've setup the daemon to run back as normal and restarted the computer:
sudo defaults write /System/Library/LaunchDaemons/com.apple.mDNSResponder ProgramArguments -array /usr/sbin/mDNSResponder -launchd
After the reboot, everything works flawlessly (it has never worked before for the 6 months I had the Apple TV).
Also interesting discovery and I think it's new because I don't remember being able to do that before, but some of my devices are on the separate 5Ghz network, some are on the 2.4Ghz and they can still all communicate flawlessly. I can use AirPlay on the Export Express that is on the 2.4 from the iMac that is on the 5Ghz, and I can access the iMac library from whatever band. Pretty nice!

My iPod won't charge and start, t happened when i came home from camp. it puts the apple sign but it just stays there i tried lots of cords and still won't start, whats going on

My iPod won't start up when my battery died i tried charging it and it won't start. I trird various cables. It has the apple sign on it though. It turns on but stays on the apple sign. I charged it over night too... Doesn't work :(. Please help!

If you are stuck on the Apple log you may need to restore.
Before you do, try this
Hold the Sleep/Wake and Home buttons until the screen goes dark and the Apple logo appears
If that doesn't help, restore:
Restoring iOS Software

Deploying Objects in the Target Warehouse , The job just hanging there!!

Similar Messages

Maybe you are looking for