Deploying Software to WES7 Device with enabled Write Filter

Hi all,
we are deploying SCCM Applications to WES7 with enabled FBWF. The Option "Commit changes at deadline during maintanance window" is enabled on the Deployment, and the installation itself works perfectly fine. (Reboot, Installation with Lockscreen,
Reboot)
But after the installation is finished, it takes some minutes (up to 20) until the device reboots to re-enable the Write Filter.
Is there any flag or command we can set or execute at the end of the installation to reboot and unlock the Workstation?

I don't have a direct answer, but this forum is for Windows Embedded POSready. You might want to post to the Windows Embedded Standard 7 forum:
http://social.msdn.microsoft.com/Forums/en-US/home?forum=quebecservicingdeployment
www.annabooks.com / www.seanliming.com / Book Author - Pro Guide to WE8S, Pro Guide to WES 7, Pro Guide to POS for .NET

Similar Messages

The Deploy Software Updates Wizard completed with errors - Access is Denied

Hello, I am trying to download some updates that were synced up to the SCCM's database from another WSUS server. I am not able to get it done because the wizard fails with the access is denied error. I checked patchdownloader.log file and saw Error code
= 5 which means access denied. I tried to change permissions on the "updateservicespackages" folder within the folder, and I have full NTFS permissions for system, administrators, and read only permissions for everyone. Same thing goes for
the share permissions. My account is in the administrators group. The only way I can get it to work is by granting full permissions to "everyone", but that cannot be security friendly. Which account is "Deploy Software Updates Wizard" using
so that I can properly give it the required rights?

Hi,
You could have a look at the thread below. Lucas used ProcMon that shows an access denied with the user which he was using. Permission via group wasn't enough. Give your user full share/security access and everything works fine.
https://social.technet.microsoft.com/Forums/en-US/99859604-a803-43f3-a172-159a500fcb90/the-deploy-software-updates-wizard-completed-with-errors-access-is-denied?forum=configmgrsum
Best Regards,
Joyce

Deploying software through group policy with certain requirements

here is the question:
I have an existing Active Directory environment, consisting of 300 computers. we need to install the latest version of ADOBE ACROBAT READER to all computers with the following requirements:
. The application is not supported on windows XP
. We need to have automatic updates turned off within the application
. We need a silent, automatic installation.
. The Engineer Department needs to be excluded, as they use Proprietary PDF app.
Is is possible to deploy thru Group Policy and meet all these so called requirements ?

Hi,
Before going further, I agree with Zanderol24.
>>
The application is not supported on windows XP
We can use a WMI filter to exclude Windows XP clients from applying the software installation policy.
Regarding WMI filter, the following article can be referred to for more information.
WMI filtering using GPMC
http://technet.microsoft.com/en-us/library/cc779036(v=ws.10).aspx
Regarding how to use WMI filter to filter out Windows XP, the following article can be referred to as reference.
Create WMI Filters for the GPO
http://technet.microsoft.com/en-us/library/cc947846(v=ws.10).aspx
>>We need to have automatic updates turned off within the application
For this is related to the software, we can contact vendor support to ask for suggestions.
>>We need a silent, automatic installation.
We can choose to assign a program distribution to users or computers.
If we assign the program to a user, it is installed when the user logs on to the computer. When the user first runs the program, the installation is completed.
If we assign the program to a computer, it is installed when the computer starts, and it is available to all users who log on to the computer. When a user first runs the program,
the installation is completed.
Regarding how to use Group Policy to remotely install software, the following article can be referred to for more information.
How to use Group Policy to remotely install software in Windows Server 2008 and in Windows Server 2003
http://support.microsoft.com/kb/816102/en-us
>>The Engineer Department needs to be excluded, as they use Proprietary PDF app.
If we choose to assign the software to computers, we have to filter out computer accounts for the Engineer Department from applying the software installation policy. If we
choose to assign the software to users, we have to filter out user accounts for the department. We can use security filtering to do this.
Regarding security filtering, the following articles can be referred to for more information.
Security filtering using GPMC
http://technet.microsoft.com/en-us/library/cc781988(v=ws.10).aspx
Filter Using Security Groups
http://technet.microsoft.com/en-us/library/cc752992.aspx
Best regards,
Frank Shen

Warning in Windows server 2012 R2 Set-VMReplication with Enable Write Order Preservation Across Disks 1

When I run the following command I get the following warning? Can anyone help out with this?
Set-VMReplication -VMName server123 -EnableWriteOrderPreservationAcrossDisks 1
WARNING: 'EnableWriteOrderPreservationAcrossDisks' is not required for 'Set-VMReplication'.
Please mark my post as helpful or the answer or better yet.... both! :) Thanks!

I have this issue. I have given my DCs and DHCP servers fixed IPv6 addresses, and every time I enable an IPv6 scope the all get a second IPv6 address from the scope, which is also published do DNS and then the next time I reboot a domain controller there
is complete confusion.
My objectives (which I am finding hard to achieve) are:
- fixed IP addresses for all systems (in IPv4 I use static IPs on servers and DHCP reservations on workstations)
- I control the gateways. If my official gateways are down I want no connectivity to the Internet, I don't want anything configuring itself.
CarolChi

Run/Debug on a device with Flash Builder 4.7 on OSX 10.9 (Mavericks) and iOS7

I am having trouble launching my Actionscript Mobile Project on a device which has iOS7 installed. It recieved this error.
Error occurred while installing the application:
Invalid <device> specified
I can still deploy to my other device with iOS6, I'm running FB4.7 and OSX 10.9. Has anyone else seen this?

Hi there.
I know this is an old post, but I fell here having this same problem for some weeks now, and i just figured my issue. Hope it help others:
My iPhone is connecting automatically with my itunes on computer. Not really sure what type of connection or wireless sync, but the fact is that it IS connecting.
For some weird reason it gets Flash Builder crazy and it cannot find the right device anymore. Even when I get my iPhone connected by cable, it says that it found the device, but doesn`t publish to it. The Flash Builder says that it was published, but nothing gets installed, and the debugger cannot connect.
MY SOLUTION (for now): Turn off the phone wi-fi, so it gets out of my home network. works like a charm and I finally can test on my device again.
Really hope this helps.

Can't Enable write cache on disk with event ID 34

One of our clients has a performance issue similar this one:
Performance issue on TS as VM - Resolution with screenshots
After monitoring it we found the problem is write cache. We improve the
... I
checked all other VMs, the Enable advanced performance is unchecked. Do you
... A: To improve the performance for the disk, here are some proactively action
plans:.
www.chicagotech.net/remoteissues/tsperformance1.htm
However, when we follow the resolution to Enable write cache, it doesn't take it with this event:
Event Type: Warning
Event Source: Disk
Event Category: None
Event ID: 34
Description:
The driver disabled the write cache on device \Device\Harddisk0\DR0.
How to fix it?
Bob Lin, MCSE & CNE Networking, Internet, Routing, VPN Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net How to Install and Configure Windows, VMware, Virtualization and Cisco on http://www.HowToNetworking.com

Hi,
By default, write caching is disabled on a disk that contains the Active Directory database (Ntds.dit). Also, write caching is disabled on a disk that contains the Active Directory log files. By doing this, you enhance the reliability of the Active
Directory files.
Thus if it is a DC, try to move the Active Directory database and the Active Directory log files off of a disk in which you need to enable write caching.
If you have any feedback on our support, please send to [email protected]

I have 3dparty software wirelessly with a cryptographic authentication system without my consent (seems to be new technology developed by stanford) obtaining ownership of my iPhone 4s software and controlling it with remote device to jail break. Now what?

I have 3rd party software wirelessly injected and used on my iphone with a cryptographic authentication system without my consent (seems to be new technology developed by stanford and apple security is not updated for this technology) obtaining ownership of my iPhone 4s software and controlling it with remote device to jail breaking my phone, adding and removing software, changing settings all from a remotely controled device from different location (I have a Mac address I'd of this device to know for sure). Almost undetectable. When I look at the legal section of my phone it shows a list of all the unauthorized 3rd party software "as is" copyright encrypted on the phone. This is the most basic way to legally steal software of any kind. Because of this legalality 3rd party ownership have total control of certain software correlated with hardware use including visualization technology, etc. most people luckily will never have this happen to them so it's unlikely many readers have not a clue of what I'm saying currently. Either way, without needing to obtain specific warranty of any kind "as is" copyright control makes system restores not a solution because the source code is not directly encrypted on the actual hardware device only a copy right notice must appear on the specific device 3rd party software validation making it extremely difficult for me to take control of the situation. Apple claims their iOS technology prevents this type copyright obstruction from being possible, however, according to my phone a new form of technology was used developed by Tom wu of Stanford university called the STANFORD SRP AUTHENTICATION TECHNOLOGY which uses Some form of cryptographic authentication system and uses quote "secure remote password" which seems to suceed in hacking iOS apple technology apple claims is not possible to jailbreak an unstolen phone or without the owners consent As well as loading the device with 3rd party copyright Notices to make all of this legalized. My phone shows atleast 30 pages worth of legalized 3rd party copyright permissions! Yesterday my apple care provider labeled me a jailbreaker and refused to look at my legal documented proof which completely blew my mind because it voides my apple care contract I spent 100 on. This employee did not take all factors into consideration and made quick assumptions as well as verbally speaking to me as I'm an automatic criminal. I left the store yesterday with no payed insurance help on a problem I had no control over and couldn't prevent, leaving with voided contracts. This is an apple users worst nightmare and I have spent days researching all of this like i am some kind of lawyer only to be able to use my phone the way it should and spent alot of money on. I can legally backup any claim I have just wrote above currently and have a large source of data collected to prove apple is wrong in voiding insurance support on this issue. The problem lies in apple avoiding and not wanting to believe their software can legally be obtained ot "hacked". Yet still labeled a jailbreaker basically.. What should I do????? Been to local apple store 3 times and rebooted my phone as well sprint service restore 4 times and spoke with reps twiice on the phone. Spoke with my phone provider who said apple has full control over these matters so they can't help me. My case is according to apple "still open"...Anyone else heard of this or of Stanford's office of technology licensing? Maybe I need to buy a blackberry again or just use a landline so I can stop being my own lawyer and focus on other productive areas in life instead of this horrible mess. I shouldn't have to prove to apple I not a jailbreaker they should have to prove I'm one before voiding support I desperately need!!

Mullaly75 wrote:
I assume u guys don't understand what open source software is
Yes, I think most of us do understand what open source software is. It sounds as if you don't. Here's some information:
Open-source software (OSS) is computer software that is available in source code form: the source code and certain other rights normally reserved forcopyright holders are provided under an open-source license that permits users to study, change, improve and at times also to distribute the software.
Open source software is very often developed in a public, collaborative manner. Open-source software is the most prominent example of open-sourcedevelopment and often compared to (technically defined) user-generated content or (legally defined) open content movements.
from http://en.wikipedia.org/wiki/Open_source_software
Yes, Tom Wu of Stanford wrote a paper on something called Secure Remote Access Protocol. It's a form of Asymetric Key Exchange and has nothing to do with hacking anything. It's actually intended to protect data.

Unable to synchronize the Address Book on the BB Device with Outlook Software 2010 Contacts

Enviroment :
Device Black Berry Bold 9700
Back Berry Device Software V6
Cause of problem :
On the BB Device there are 2 Adress Books with the same name.
The first one with 109 elements and the flag for wireless synchronization
The second, which is of most importance to me since it includes my business address book, contains 1837 elements and does NOT have the flag for wireless synchronization.
Whenever I try to synchronize the BB Device with the PC , using Black Berry Device Software on my Windows 7 based PC and Outlook 2010 Application Software, only the first Adress Book appears active.
I tried to solve the problem through the BB Support Forum (see link below)
http://btsc.webapps.blackberry.com/btsc/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB1...
and regretfully I found out that no solution are available so far.
This is a previously reported issue that has been escalated internally to our development team. No resolution time frame is currently available.
The suggested Work Around doesn't work.
Since both address books could be cleaned but not erased, it is impossible to delete the first address book and subsequently synchronize the right data .
I tried to synchronize the BB Device with the Windows contacts but the result is the same: the synchronization works only for the first (small) Address Book.
Another bit of info, to worsen the situation: last week the HDD (internal disk) on my PC crashed, therefore I lost all my data; as a result, the only correct Address Book data available is inside the Black Berry device (larger list, which is the second, as stated above) , thus I absolutely need to recover all the 1837 addresses included, since they are vital for my business work.
I need your help to solve this situation caused by an evident Black Berry Software bug.
Thanks in advance

I do not receive any suggestions to solve my problem.
After 6 month the problem is very urgent, my business address book is vital for my work.
I have only the copy on the Device Black Berry Bold 9700 and I absolutely need to have a copy of the address book on my computer.
Do you have solved the bug.
I need a quick answer and a final right solution
Thanks
Luigi Policoro

I have recently reinstalled my mac air with the tiny usb device provided and some of the software/apps which came with the mac is now gone! how do i get it back. thanks.

i have recently reinstalled my mac air with the tiny usb device provided and some of the software/apps which came with the mac is now gone! how do i get it back. thanks.

thank you so much ill give it a shot

I have using I phone 5c after connected with my HP elite book 6930p laptop, Automatic software driver is not deducting, and display Windows found driver software for your device (MTP USD Device) but encountered an error while attempting to install it.

I am using I phone 5c after connected with my HP elite book 6930p laptop, (Installed Window 7 32 bit). automatic software driver is not deducting, and display Windows found driver software for your device (MTP USD Device) but encountered an error while attempting to install it.
I did install itunes and update also. but the above problem still same.
Kindly give me solution of it. awaiting.
Regards
Abbas Kader

try it with another computer to check if it shows up
if so
uninstall all apple software
reboot
use regedit to search and remove all itunes keys
reboot
resinstall apple software
if non of that helps then try another cable
if that don't help could be your phones connector is damaged

I downloaded 4.0, but it disabled my Kaspersky Anti-Virus software. How can I enable Kaspersky with Firefox 4.0?

I downloaded 4.0, but it disabled my Kaspersky Anti-Virus software. How can I enable Kaspersky with Firefox 4.0?

Mozilla Firefox 5 has disabled my Kaspersky. Why?

I've been trying to get a book sample and a dialogue box comes up saying: To receive book samples, you need a device with the latest versions of iOS and ibooks installed and Automatic Download enabled. I have iBooks installed and automatic download enabl

I've been trying to get a book sample and a dialogue box comes up saying: To receive book samples, you need a device with the latest versions of iOS and ibooks installed and Automatic Download enabled. I have iBooks installed and automatic download enabled. I don't know if it's talking about a new version of iOS on my iphone or my laptop. You people sure like to make things difficult.

trevbeats,
I had the same problem. It turned out the issue for me was that I had Automatic downloads turned off on my devices!
see below how to turn it on.
Tap Settings > iTunes & App Stores on your device.
Tap Sign In if you're not already signed in to the iTunes Store.
Enter your Apple ID and password.
Tap On/Off switch to enable or disable Automatic Downloads for each content type.

Having to delete your same iMessage conversations on multiple devices with iCloud enabled

I have iCloud enabled on my Mac, iPad, and iPhone. Apple could possibly develop a feature where if one device with iCloud that is turned on deletes a message conversation, it deletes the converstation on your other (turned on) iCloud devices as well. This way, when you switch from using your iPhone to iPad, you will not have the 10 different converstations you started on your iPhone that were deleted, on your iPad to delete as well.

I'm sorry I'm not being clear. I know that the sent boxes are separate. What I meant by combined mailboxes was the inboxes for each of the two accounts across all devices. That is, say, for my MobileMe inbox, being able to see all contents of the MobileMe inbox on all my devices, regardless of which device I first read the message on. And then the same for the other mailbox too. And finally, for these to be marked read / unread on a consistent basis and to be notified on the iOS devices too.
Not too much to ask?!

My Photoshop Elements 11 has suddenly lost contact with my CanoScan 9000F with the following message..."CanoScan 9000. software for this device could not be launched. The drive is not connected or is busy." How do I regain connection?

My Photoshop Elements 11 has suddenly lost contact with my CanoScan 9000F with the following message..."CanoScan 9000. software for this device could not be launched. The drive is not connected or is busy." How do I regain connection?

Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem

There must be a real solution to "Windows found driver software for your device but encountered an error installing"

"Windows found driver software for your device but encountered an error installing"
I've spent hours researching this error - Seems like many people have the same issue although there is no difinitive fix or known cause.
I'm hoping someone here has an answer.
Windows 7 Home Premium x64 OEM (HP)
This is not an upgraded Vista system.
It's not a specific driver related issue as it's the same response/effect be it graphics/chip set/usb/printer drivers.
Please dont suggest to flatten and re-install or run a repair install - It's not an option, I only have remote access to the unit
as it's currently in field use.
This is a machine specific issue - identical machine purchased at the same time and configured the same has no issue.
So the story.
User has been fine for weeks - no hardware of software changes except Windows Updates.
A Camera/USB connection that was working no longer does.
Tried in all USB ports
Plug in - windows announces found new hardware, tries to install drivers then fails
with "Windows found software for your device but encountered an error installing ...."
Device manager finds and identifies device although it is in the 'Unknown Device" category.
Manually updating drivers via search/internet or point directly at a driver has exactly the same effect.
Thinking this was just the camera drivers - I researched and downloaded new drivers from camera manufacturers sites
Fuji and Canon.
Same effect.
Deleted/uninstalled drivers completely, deleted/uninstalled all USB root hub and USB devices (hidden and visible)
SFC /Scannow finds no error
Cold boot finds USB and chipset(?) devices on boot attempts to reinstall then we get
"Windows found driver software for your device but encountered an error installing"
So now I have no usb devices at all - memory stick/card reader/printer...... nada.
in fact if I try to update any device driver I get the same message generated.
Restore point does not help either.
After much trawling I found reference to a permisions issue and stale driver cache data.
(This is using an administrator account - not user with admin permissions?)
I'm willing to try anything at this time
I deleted the infcache.1 and other .dat files under c:\windows\system32\driverstore
Copied the usb .inf and .pnf from the appropriate FileRepository directory into c:\windows\inf
Uninstalled all the usb/unkown devices from device manager again.
Rebooted
Takes a little longer to boot as I take it it's rebuilding the driver cache then
a very short hurrah!!!
I can now use usb memory card and pen drives - no issue
Plug in a camera or printer...
"Windows found driver software for your device but encountered an error installing"
Several attempt at this trying different driver versions.
It should not be vendor specific, the other field machine that works is using Microsoft drivers for these devices.
I even copied the drivers from one machine to the other - repeated everything above...
"Windows found driver software for your device but encountered an error installing"
And then the nail in my sanity
Try windows update....
Reboot
"Windows found driver software for your device but encountered an error installing"
but this time its different.
The device it thinks it cannot install is the generic MTP-PTP drivers (Photo Transfer Protocol -so am I getting somewhere)
so it still finds but cannot install.
The cameras are always found but appear as 'unknown devices' and cannot be accessed
Uninstall all USB/unkown again - reboot..
Same message and this time I've lost all the USB again.
Restore point to before Win Update gets me USB back again although I still have no cameras - so theres an update issue as well.
This has to be tied down to a file access/ registry problem although I'm loath to go cutting about without some guidance.
I'm no great believer in 'registry cleaners' unless anyone can point to a definitive/no ad's/sales version that really works.
As I said above, flattening/rebuild at this time is not an option - the user is not best pleased and I'm completley stumped.
If anyone has experienced(manu of you have) and fixed(still to find one) this issue please let me know how as soon as possible.
Chris

I know I am replying to an old thread - but I have the answer and resolved this error, and since this message comes up first in search results, and part of my answer came from this thread, I wanted to help someone else as this took an extra
12 hours and a lot of technical insight to resolve. See below for detailed explanation that others ask for above.
My original issue was that iTunes didnt reinstall. generating this error that said I am trying to access an unavailable network resource and to browse to find itunes64setup (again). This may partly have been due to me deleting old install version folders.
Research led me to completely uninstall apple products and reinstall per their instruction and fixed the issue with iTunes. see
Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8 - Apple Support
The SAME error I had while updating itunes recurred while uninstalling it from my Windows 7 SP1 system...so I went to microsoft Fixit and attempted to correct and it properly uninstalled iTunes for me, which allowed the reinstall.
What didnt work was my USB web root/ root hub, which partly involved my older system and USB 1.0, and the delete/reinstall existing drivers with the c:\windows\winsxs folder as source of drivers (thank you Magon Liu!!!) which I had to figure out what/why
and how.
Then I had an intel chipset issue...my new Iphone wasn't recognizing in plug and play, and there was an error with installing the device drivers for my new iphone 6. Manual applications didn't work, even though a generic device showed in control panel -
device manager with a yellow !
Per above blog answer - I tried to remove and reinstall my USB controller or update the drivers (I have an Alienware M15 laptop - a few years old.) I discovered that the USB host controller - an Intel(R) 5 Series / 3400 Series Chipset family USB Enhanced
Host controller - (port) was not covered by current Intel chipset programs which are Series 6 and later, but did have an update (8/20/2009 v9.1.1.1020) that supported USB 2.0 (and therefore 3.0 backwards compatibility which as an issue with my new iPhone
and some USB thumb drives.) To find this I had to look at the Support - Downloads and Drivers - browse for drivers and somewhere found an option to look for older no longer supported drivers. I found infinst_autol.exe for my case.
Once downloaded I tried to install and failed. Found the log in C:\Intel\Logs and contains:
[InstallDev]
          [Device]
            Driver = C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\WIN7\ibexusb.inf
            INF = C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\WIN7\ibexusb.inf
            Installed INF =
            Previous driver package =
!           Warning 0xE0000235: DriverPackageGetPath failed.
            Difx = 64 bit
Execute command: C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\x64\Difx64.exe -DriverInf "C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\WIN7\ibexusb.inf" -Flags 20 -KeyPath "Software\Intel\Difx64"
            Using RegDeleteKeyEx
!!!         ERROR 0xE0000246: DriverPackageInstall generated an unexpected error
HERE'S THE ADDED EXPLANATION TO BRIAN'S POST THAT EXPLAINS THE SECURITY ISSUE:
This turned out to be an error for two reasons. First, after manually running the command in an "run as administrator" window (same error result), thinking it related to my anti-virus (turned that off/disabled firewall and A/V), and from this thread
granting my user administrative rights to files in an install folder and trying to reinstall inf files and drivers from C:\Windows\winsxs vs my copied infinst_autol.exe expansion (as found from log in C:\Users\David Samuels\AppData\Local\Temp\IPMx7\WIN7 folder).....that
there was an easier solution as the reason this error actually happens is a permissions problem.
To access the proper windows system folders - you have to be the TrustedInstaller service - not just in the administrator group...or you have to be the actual "Administrator" account. To become actual administrator on
your own laptop, Open a command window "run CMD.exe as administrator", then execute command
> net user administrator /active:yes
This creates a local PC Administrator account with no password. Coincidentally it has proper permissions to windows directories for installing drivers. Log in as this user, go to device manager and update the USB hub and any other drivers. if updating the
USB root - it doesn't replace it right away as the system cant disable the currently resident in memory "running" driver - you have to update, then restart the system, log in as administrator and repeat at the next lower layer that has issues.
Once completed - log in as yourself again and disable the administrator account in a command window with > net user administrator /active:no
This in my case enabled all my USB 2.0 and 3.0 devices on my originally only USB 1.0 laptop and everything else works properly again - I hope this helps many of you to resolve your own issues that were difficult to find and resolve and that got as far as
this thread. Good luck!
Regards,
Dave Samuels

Deploying Software to WES7 Device with enabled Write Filter

Similar Messages

Maybe you are looking for