Deployment tool download switch failing

I have downloaded the deployment tool and set up a download configuration file. When I run the setup with the "/download" switch it runns for a while them fails. The log file tells me that upong downloading the "stream.x86.x-none.dat"
file it fails wthi and error that tates "08/15/2014 13:19:43.144 SETUP (0x17b4) 0x173c Click-To-Run aoh8t Unexpected DownloadOffice::HandleStateAction: Failed to download office bits.".
I thenk get a bogus message stating that I need to check my Internet connection or clear space on my hard drive. There is pleanty of space on th elocal drive though the download should be going to either a network drive (with pleant of space) or I
tried an external hard drive with 1.8 TB of free space. It still fails with the same message(s).
I've found only one other post similar and there was no resolution listed there.
Could someone point me in the right direction, or better yet, have a solution?

Has it ever worked for you?
The most common reason for troubles like this, is due to an incorrect configuration.xml
Often, this can be due to smart-quotes (angled) instead of plain-quotes (straight) - this happens if you copy/paste from a webpage.
Here's a guide:
http://blogs.technet.com/b/odsupport/archive/2013/06/19/using-the-office-deployment-tool.aspx
For the "download" phase, the configuration.xml doesn't need very much in it at all..
e.g.:
<Configuration>
   <Add OfficeClientEdition="32" >
    <Product ID="O365ProPlusRetail">
     <Language ID="en-us" />
    </Product>
   </Add>
</Configuration>
I'm using this configuration.xml, right now, and it's downloading fine.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Similar Messages

Error starting the Application Server and Deployment Tool

After installing the iPlanet Aplication Server with sp3 I get the following
errors starting the Application Server and Deployment Tool.
iAS Application Server
================
GXBindInit: GXBindBasic failed
GXContextInit: GXBindInit failed 2
[26/Out/2001 17:46:49:8] error: ENGINE-context_init_failed: EngineClassSpace
ContextModule.createContextInit failed:
error: could not get context
*** Errors in initialization from registry ***
Errors in initialization, exiting ...
iAS Deployment Tool
===============
GXBindInit: GXBindBasic failed
GXContextInit: GXBindInit failed 2
[26/Out/2001 17:23:40:7] error: ENGINE-context_init_failed: EngineClassSpace
ContextModule.createContextInit failed:
Exception in thread "main" java.lang.NullPointerException
at com.kivasoft.util.Util.loadComponent(Unknown Source)
at
com.iplanet.ias.tools.buzz.ui.application.StartBuzz.initGDS(Unknown Source)
at com.iplanet.ias.tools.buzz.ui.application.StartBuzz.main(Unknown
Source)
Can anyone help me please!

Hi,
Would be more helpful if you can mention, the O/S. Also, pls mention where
you are getting this error, at kjs or kxs, or, are you able to start the server
and at which specific instance do you encounter this.
Regards
Raj
"Antonio Casqueiro" wrote:
After installing the iPlanet Aplication Server with sp3 I get the following
errors starting the Application Server and Deployment Tool.
iAS Application Server
================
GXBindInit: GXBindBasic failed
GXContextInit: GXBindInit failed 2
[26/Out/2001 17:46:49:8] error: ENGINE-context_init_failed: EngineClassSpace
ContextModule.createContextInit failed:
error: could not get context
*** Errors in initialization from registry ***
Errors in initialization, exiting ...
iAS Deployment Tool
===============
GXBindInit: GXBindBasic failed
GXContextInit: GXBindInit failed 2
[26/Out/2001 17:23:40:7] error: ENGINE-context_init_failed: EngineClassSpace
ContextModule.createContextInit failed:
Exception in thread "main" java.lang.NullPointerException
at com.kivasoft.util.Util.loadComponent(Unknown Source)
at
com.iplanet.ias.tools.buzz.ui.application.StartBuzz.initGDS(Unknown Source)
at com.iplanet.ias.tools.buzz.ui.application.StartBuzz.main(Unknown
Source)
Can anyone help me please!

Error starting the Application Server and Deployment Tool in Windows 2000

After installing the iPlanet Aplication Server with sp3 in Windows 2000 I
get the following
errors starting the Application Server and Deployment Tool.
iAS Application Server
================
GXBindInit: GXBindBasic failed
GXContextInit: GXBindInit failed 2
[26/Out/2001 17:46:49:8] error: ENGINE-context_init_failed: EngineClassSpace
ContextModule.createContextInit failed:
error: could not get context
*** Errors in initialization from registry ***
Errors in initialization, exiting ...
iAS Deployment Tool
===============
GXBindInit: GXBindBasic failed
GXContextInit: GXBindInit failed 2
[26/Out/2001 17:23:40:7] error: ENGINE-context_init_failed: EngineClassSpace
ContextModule.createContextInit failed:
Exception in thread "main" java.lang.NullPointerException
at com.kivasoft.util.Util.loadComponent(Unknown Source)
at
com.iplanet.ias.tools.buzz.ui.application.StartBuzz.initGDS(Unknown Source)
at com.iplanet.ias.tools.buzz.ui.application.StartBuzz.main(Unknown
Source)
Can anyone help me please!

Okay, pls check that you are logged in as administrator and installed and now you are logged in as administrator and registering the iAS server. Did you get any installation failures while installing and are you able to register the server using iASAT ?

Download O365 installer files using Office Deployment Tool times out...

Hi,
We need to deploy O365ProPlus as part of an operating system image using MDT. I was pointed to this page for instructions:
https://technet.microsoft.com/en-us/library/dn314789.aspx
We first needed to download the source files, so I first downloaded the Office Deployment Tool and used this to download the O365ProPlus image to my MDT server.
I created the following config file (O365x64.xml):
<Configuration>
<Add SourcePath="X:\O365\" OfficeClientEdition="64">
   <Product ID="O365ProPlusRetail" >
     <Language ID="nb-no" />
   </Product>
</Add>
</Configuration>
And I invoke the command to run the Office Deployment Tool:
.\setup.exe /download X:\O365.x64.xml
Then the process creates a folder X:\O365\Office\Data with a couple of 16kb CAB files, but nothing happens apart from this.
What am I doing wrong...? I expect the Office folder to be alteast a gigabyte...
Thanks for comments
Tor

Please first check your network or switch to a different network, then try again.
Additionally, you might want to check if your network setting/firewall setting is blocking any Office 365 IP address/URL:
https://technet.microsoft.com/en-us/library/hh373144.aspx
Regards,
Kapaal

Prerequisite Check Failed: Windows Deployment Tools installed

Hi Configuration Manager community,
I'm installing SCCM 2012 R2 and keep getting stuck at the "Windows Deployment Tools installed" pre-req.
I've followed the link and installed Windows Deployment Tools component of Windows Assessment and Deployment Kit for Windows 8.1, but Setup keeps showing this pre-req's status as Failed.
Any suggestions?
Thanks!

Mike
Just confirm you have followed the steps outlined in my R2 install guide
https://sccmentor.wordpress.com/2014/01/08/sccm-2012-r2-step-by-step-installation-guide/
What's in your ConfigMgrPreReq.log & ConfigMgrsetup.log files re: Windows Deployment Tools?
Cheers Paul | http://sccmentor.wordpress.com

Error / fails to connect Oracle data source using deploy tool

Hi,
I want to deploy SAP AS on my company's J2EE application. I deployed the application using Deploy Tool successfully. The application is started without error.
When I tried connecting the log on page. I got error in LogViewer:
Error while accessing porting layer for ORACLE database via getDatabaseHost().
Relatives : com.sap.sql.jdbc.direct.DirectConnectionFactory
Resource Bundlename : com.sap.sql.log.OpenSQLResourceBundle
Source : /System/Database/sql/jdbc/direct
Argument Objs : ORACLE,getDatabaseHost(),
Where to look for debugging errors?
-- Joe

Hi Markus,
I changed to Vendor SQL and set Initial Connection to 1.
On Monitor tab, I see a green line running across the screen.
I believe this proves that the connection has been established.
Thanks a lot!
-- Joe

Office Deployment Tool Packager Error

I've successfully downloaded Visio Pro and Std using the deployment tool. When I run setup with the /packager switch, both versions error out with the following message in Flattener.log. The source and destination directories are both local
so no network issues.
Any help would be appreciated. Thank you
Flattener.exe Generating registry hive.
Flattener.exe : ERROR : Packaging FAILED: The system has attempted to load or restore a file into the registry, but the specified file is not in a registry file format
Exception (outer): The system has attempted to load or restore a file into the registry, but the specified file is not in a registry file format
ST (outer):   at Microsoft.ApplicationVirtualization.Packaging.PackagingEngine.<PreparePackage>b__a(Exception exception)
   at Microsoft.ApplicationVirtualization.Packaging.ExceptionGuard`1.Guard(Action logStart, Action execute, Action logEnd, Action`1 exceptionAction)
   at Microsoft.ApplicationVirtualization.Packaging.PackagingEngine.PreparePackage()
   at Microsoft.ApplicationVirtualization.Packaging.Packager.PreparePackage(Func`2[] subsystemCreators, String installPath, Predicate`1 excludeFile, Predicate`1 excludeKey)
   at Microsoft.ApplicationVirtualization.Packaging.Packager.PreparePackage(String ingredientsPath, String manifestPath, String oldManifestPath, String registryHivePath, String installPath, Predicate`1 excludeFile, Predicate`1 excludeKey, PackagingEngineType
engineType)
   at Microsoft.ApplicationVirtualization.Packaging.IsvPackager.PreparePackage(String ingredientsPath, String manifestPath, String registryHivePath, String installPath)
   at Microsoft.Tools.Office.C2R.Packager.PackageAsFile.CreatePackage(String ingredientsXmlFileIn, String destinationPackageFilePath, Int32 countOfFilesToAdd, String manifestFileIn, String manifestLocFileIn, String streamMapIn, String productName,
String packageGUID, String packagePlatform, String packageVersion, String appID, String manifestFileOut, String registryHiveFileOut, String installPath, JobType jobType, String workingDir, CompressionOption compressionOption, VFontsType vfontsType, ArrayList
comEPClassToInclude, ArrayList comEPInterfaceToInclude, ArrayList comEPTypeLibToInclude, Boolean isLaunchedByFlattener)
Exception (inner): The system has attempted to load or restore a file into the registry, but the specified file is not in a registry file format
ST (inner):   at Microsoft.ApplicationVirtualization.Packaging.HiveLoader.ThrowExceptionOnError(Int32 result)
   at Microsoft.ApplicationVirtualization.Packaging.HiveLoader..ctor(String hiveFilePath, String hiveSubkey, RegLoadKeyApi RegLoadKey, RegUnLoadKeyApi RegUnLoadKey)
   at Microsoft.ApplicationVirtualization.Packaging.HiveLoader..ctor(String hiveFilePath, String hiveSubkey)
   at Microsoft.ApplicationVirtualization.Packaging.RegistryPackagingSubsystem.<.ctor>b__1(String filePath, String subkey)
   at Microsoft.ApplicationVirtualization.Packaging.RegistryPackagingSubsystem.<>c__DisplayClass9.<.ctor>b__4(Object sender, CommonPreEventArgs args)
   at System.EventHandler`1.Invoke(Object sender, TEventArgs e)
   at Microsoft.ApplicationVirtualization.Packaging.PackagingEngine.OnPreparePackage()
   at Microsoft.ApplicationVirtualization.Packaging.PackagingEngine.<PreparePackage>b__8()
   at Microsoft.ApplicationVirtualization.Packaging.WithAppCorruptionCheck.Execute(Action execute, Action`1 logCorruption)
   at Microsoft.ApplicationVirtualization.Packaging.WithAppCorruptionCheck.Execute(Action execute)
   at Microsoft.ApplicationVirtualization.Packaging.PackagingEngine.<PreparePackage>b__7()
   at Microsoft.ApplicationVirtualization.Packaging.ExceptionGuard`1.Guard(Action logStart, Action execute, Action logEnd, Action`1 exceptionAction)
Flattener.exe : ERROR : Abandoning build due to fatal error
ST:   at Microsoft.Tools.Office.C2R.Packager.Log.Message(String message, SEV type, String messageID, Boolean logToConsole, Boolean logPrefix)
   at Microsoft.Tools.Office.C2R.Packager.Log.Message(String message, SEV type)
   at Microsoft.Tools.Office.C2R.Packager.PackageAsFile.CreatePackage(String ingredientsXmlFileIn, String destinationPackageFilePath, Int32 countOfFilesToAdd, String manifestFileIn, String manifestLocFileIn, String streamMapIn, String productName,
String packageGUID, String packagePlatform, String packageVersion, String appID, String manifestFileOut, String registryHiveFileOut, String installPath, JobType jobType, String workingDir, CompressionOption compressionOption, VFontsType vfontsType, ArrayList
comEPClassToInclude, ArrayList comEPInterfaceToInclude, ArrayList comEPTypeLibToInclude, Boolean isLaunchedByFlattener)
   at Microsoft.Tools.Office.C2R.Packager.Package.PackageFromOptions(Options options, Boolean closeLogFile, String binaryIdPackageMap)
Flattener.exe : ERROR : ERROR: Abandoning build due to fatal error :    at Microsoft.Tools.Office.C2R.Packager.Log.Message(String message, SEV type, String messageID, Boolean logToConsole, Boolean logPrefix)
   at Microsoft.Tools.Office.C2R.Packager.Package.PackageFromOptions(Options options, Boolean closeLogFile, String binaryIdPackageMap)
   at Flattener.Flattener.CreateAppVPackageFromOptions(String packagerArguments)
   at Flattener.Flattener.CreateAppVPackage()
   at Flattener.Flattener.Run(String[] args)

I've successfully downloaded Visio Pro and Std using the deployment tool.
Are you sure all the source files have downloaded from the MS CDN correctly and successfully ?
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Office Deployment tool not trying to install 32 bit verion where OfficeClientEdition is set to 32

We used the Office Deployment tool to download the 32 bit version of Office 2013. Now when we try to deploy the 32 bit version we received an error. This is on a 64 bit Windows 7 PC.
Here is the configuration XML file
<Configuration>
     <Add OfficeClientEdition="32">
     <Product ID="O365ProPlusRetail">
           <Language ID="en-us" />
        </Product>
     </Add>
     <Logging Path="C:\Temp" />
</Configuration
Here is the line in the log file that shows the download error.
FileDownload::Download: Download failed for "C:\Users\swessmi\Desktop\Office_Deployment_Tool\Office\Data\15.0.4615.1002\i641033.cab", try 0. {"SessionID":"47a04060-d70c-4af4-be4d-dc5b1428c60b","GeoID":"244","Ver":"15.0.4619.1000","ErrorCode":"2","ErrorMessage":"ErrorCodeOnly
(Failed to copy file src: C:\Users\swessmi\Desktop\Office_Deployment_Tool\Office\Data\15.0.4615.1002\i641033.cab, dest: C:\Users\swessmi\AppData\Local\Temp\OfficeC2R97A92F51\i641033.cab , Error:0x2)","AppVErrorSource":"","ErrorType":"2"}
The Deployment tool is looking for the i641033.cab file which is the 64 bit version. We want to install the 32 bit version so we did not download the 64 bit version.
If I try to install the 64 bit version by changing the OfficeClientEdition="64" the deployment tool installs the 64 bit version fine from the internet as I have not downloaded the 64 bit version.

Hi,
As tested, i641033.cab is also part of 32-bits Office installation source. When you have 32-bits Office downloaded, you should see i641033.cab under ...\Office\Data\15.0.4615.1002\ (in your case).
Looks like the installer was having an issue downloading i641033.cab, try to download the source file again, or manually download i641033.cab, then try again.
Some useful threads:
http://community.office365.com/en-us/f/156/t/159359.aspx
http://ganey.co.uk/?news=Couldnt%20Install%20Office%20365,%20Check%20Internet%20Connection,%20Disk%20Space&n=155
Thanks,
Ethan Hua CHN
TechNet Community Support

Cant make a download appear in Tools - Downloads

I am installing Trail on Firefox v25 Have downloaded the ISo key and checker but cannot make the key appear in Firefox Tools - downloads. I have modified the download window as instructed but still does not appear when I save the ISO file to itself in File - open file I get error message "fail' Any suggestions as I can do no more until I can get the download to show.

'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Please report back soon.

Error in Office Deployment tool

hi,
Error in Office Deployment tool
Any known issue? tnx

I've seem the same problem twice today. Check your local network status and disable filewall/AVG to try it again.
You may also refer to the answer in my another threads and let me know your update. Thanks.
http://social.technet.microsoft.com/Forums/en-US/de716bad-ad39-4dc6-a473-c43574afd942/office-deployment-tool-fails-to-download-source-files?forum=offi
Tony Chen
TechNet Community Support

Office Deployment Tool Help

Alright, further troubleshooting for any other boys and girls that may tune in with this issue.I tweaked my XML file (see updated version).
The logging is now working (attached error log), and showing Download failed for c:\o365\office\data\15.0.4737.1003\i641033.cabI looked in that folder c:\o365\office, didn't see those cab files!
I made sure my user account had read/write/modify rights to that c:\o365\office folder that was auto generated/downloaded and it contains cab files I reran the setup.exe /download install.xml, it redownloaded the files, and the cab files are now showing up!I then reran the setup.exe /configure install.xml and the officeclicktorun.exe process is now running in the background, and installing the software.
It's hard to say if it was a rights issue, or an issue with the download not...

Hello, trying a basic Office 365 installation using the Office Deployment Tool per https://technet.microsoft.com/en-us/library/JJ219423.aspx
Attached my XML file
For testing purposes, current set up under c:\o365
Ran setup.exe /download c:\o365\configuration.xml and the "Office" folder appeared with the install bits.
Ran setup.exe /configure c:\o365\configuration.xml and receive error message "Couldn't Install. Check internet connection / hard drive space. Error Code: 30088-1021 (0)"
Verified Windows Firewall turned off, AV turned off, and plenty of hard drive space.
Any advice welcome. Thanks!
This topic first appeared in the Spiceworks Community

Office 2013 deployment tool Invalid product ID error

Hi,
Im in the process of virtualizing apps like Office 2013 with App-V.
Downloading the binaries with the Office Deployment tool and converting to app-v package is very easy, I've followed this kb
http://support.microsoft.com/kb/2915745
But now I want to sequence add-ins for Office 2013. So I need a local install of Office 2013 click to run.
Im trying to use the command line option setup.exe /configure <path to config.xml> but everytime I try this I receive this error:
Invalid product ProPlusVolume specified. Error configuring products
I have tried several different ProductID's like ProPlusVolume and StandardVolume. None of the volume ID's seem to work. When I changed the ID to ProPlusRetail, the setup worked flawless. But I need to install the Volume version for my RDS server...
I have found other people in the comment section in this blog: http://blogs.technet.com/b/office_resource_kit/archive/2013/12/03/3615124.aspx
(read the comments in the bottom section) But no solution..?

It's my understanding that you don't use the "/configure" parameter when using the "Volume" options.
Jeremy refers to this in the comments/responses.
In the main blog article, he refers to "You can now use the Deployment Configuration file to configure...."
This does not mean that you should use the "/configure" parameter - that is only used for C2R.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Deployment Tool, Different Config Files, Same Results

I should mention that I'm generating App-V 5 packages for Office 2013. Maybe this question belongs in the App-V forums.
I can't seem to create a configuration file for the Office Deployment Tool that does what I want. This configuration:
<Configuration>
<Add SourcePath="D:\Something\Something\Source\Full Suite" OfficeClientEdition="32">
<Product ID="ProPlusVolume">
<Language ID="en-us" />
</Product>
<Product ID="VisioProVolume">
<Language ID="en-us" />
</Product>
<Product ID="ProjectProVolume">
<Language ID="en-us" />
</Product>
</Add>
</Configuration>
generates an App-V package with the "basic" Office apps (Word, Excel, etc.), along with Visio and Project. That part is fine.
If I remove the Product elements for Project and Visio, I expect that a "basic" Office package will be created. However, Visio and Project are still in the package, and they are indeed usable. We have limited licenses for Project and Visio, so
I would like them not to be deployed to every machine.
I have tried giving the two configuration files their own source folders, that is, running the download command once for each configuration file and telling it to download to two different folders... same results.
This is similar to John Marcum's follow-up question at
https://social.technet.microsoft.com/Forums/office/en-US/c9462446-7744-4e3e-8c25-dbcd185a17e4/creating-lync-and-onenote-appv-packages?forum=officesetupdeploy

Kazzan's reply technically does work, and it is a viable option. However, that reply led me to wonder what the Office Deployment Tool (ODT) is doing to a machine that makes generating different packages difficult or impossible.
I found that the ODT leaves files behind in the current user's Temp directory, after the package generation is finished. At least one of these folders (named Microsoft Office 15) contains the file system contents of the App-V package. So, I decided
to clear the Temp directory in between runs of the Office Deployment Tool. Simply clearing this directory was not enough to solve the problem, but I'm still doing it as part of the build process.
Running Process Monitor showed me activity in HKCU\Software\Microsoft\Office\15.0\ClickToRun. Deleting this entire key does not appear to be necessary, and I'm not sure what that would do if you actually used Office Click-To-Run on the same machine on which
you're running ODT. So, I deleted just these keys:
HKCU\Software\Microsoft\Office\15.0\ClickToRun\Configuration
HKCU\Software\Microsoft\Office\15.0\ClickToRun\ProductReleaseIDs
HKCU\Software\Microsoft\Office\15.0\ClickToRun\Scenario\APPVPACKAGE
Deleting those keys, along with the Temp directory cleanup, is sufficient to let me build multiple Office 2013 App-V 5 packages on the same computer.

I have an iPhone 4 and the iOS 4.3.5 download keeps failing - error states its corrupted.

I have an iPhone 4 and the iOS 4.3.5 download keeps failing. It downloads then I get a message stating that the download was corrupted and couldn't be installed. I've tried it with bitdefender switched off. I've tried it with it in airplane mode. My partner has tried to update their iPhone on a different computer to mine and is also getting the same problem and error message. Help!

That's exactly right. And since you have a MacBook Air (as I do), that means the synching should occur just fine (if you've set it up right in iTunes). In other words, once you actually do the update, the iTunes on your MacBook Air will re-sync your photos back to your iPhone.
Basically, the process is that your iPhone gets backed up, wiped clean, then the new iOS version gets installed, then the backup gets restored. That will restore everything in the article above, which does not include your photos. But the sync process that happens after the iOS installation would restore your photos from iPhoto given you've set it up that way in iTunes.
When you have your iPhone plugged into iTunes, while looking at the iPhone's summary page, click "Photos" on the right side of iTunes to see how you have your sync set up.
Regardless, it sounds like you'll be fine! Your photos will wind up in iPhoto once you place them there. They will be safe there.

[Deploy Tool] How to create a Servlet?

Hello,
i try to assemble and deploy a java servlet with the deploy tool in NW4, but to no avail. I managed to use jsps succesfully, but up to now i failed with servlets.
When i try to access the WAS after deploying my exercise, i get:
<b>404 Requested resource ( Ue160/servlet/Login.class ) not found.</b>
The file Login.class, the directory /servlet and the URL mapping are defined in the file tab of 'J2EE Components'. As far as i can see the servlet container is unable to load the class file.
The servlet name is in red, so something is wrong. But i can build the war-file without any error messages.
Any hints?
I can't use the developer studio, because it does not work with NW4.
Message was edited by: Nico Manicone

hi jeff
1. I am not aware of any portal specific screen which can create this screen for you. However to create a servlet you will need to extend from the HttpServlet interface
2. To direct the request to your servlet from your jsr 168 portlet you could use the PortletRequestDispatcher getNamedDispatcher(String s) declared on PortletContext
Hope this helps
anand

Deployment tool download switch failing

Similar Messages

Maybe you are looking for