Depreciation Planned Values for an Asset

Hi,
Can anybody suggest how can I bring the total planned depreciation values (month wise).
I would like to know the structure, table or function module.
We have tried with function module ANEP_AFARECHNEN but notfetching the results.
I know ANLC table shows the values but only for the years that are roll-forwarded by the system.
But, I want the planned depreciation values for complete life of the asset.
Any help would be appreciated.
Regards,
Ravi

Please check RA_AFABUCHEN
Please refer link:[http://www.se80.co.uk/sapfms/r/ra_a/ra_afabuchen.htm] for mapping the interface.
The parameter i_afbper identifies the period

Similar Messages

  • APC Value and Plan Value for an Asset.

    HI Gurus,
                      I am developing a report where I have to display the APC value and Plan value of an Asset.Can anyone pls give an insight how to find this for the Asset.

    Hi,
    why don´t you use the logical database ADA which most of the FI-AA standard reports do? The logical database is a service to get this information without developing all the READ information and translation by yourself, especially when talking about mid-year-reporting, consistence checks, etc..
    If you decide to use ADA, then the events GET ANLA0, GET ANLAV and GET ANLCV are from interest for you for information about APC and planned/posted depreciation value.
    Regards,
    Markus

  • Memo Value for Main Asset and Sub Asset

    Dear Experts,
    I am having the requirement that, all the main asset should have the memo value Rs 1.
    For this I have specified the memo value in OAYI. But system is taking the memo value for Main asset as well as Sub asset.
    But we don't want to keep the memo value for sub asset.
    I hope, I am missing some settings. Could anyone please help me to solve this.
    Regards,
    Aswin

    Hi:
           You need to review your copy settings for sub assets for your relevant class's screen layout in  SPRO...Financial Accounting,,,,Asset Accounting....Master data....Define Screen Layout for Asset Master Data....Select the screen layout which has been assigned to your asset class in OAOA. You will not find any field for value copied. So it is not possible to avoid this happening becuase it is done a t CO code level.
    Regards

  • Relevance of Maximum Plan Value for Cost Center wise SKF plan Data

    Hi,
    Will you please tell me the relevence of data entered as Maximum Plan Value for the Cost center wise SKF data plan i.e. data entered through T Code KP46 using planning layout 1-301 with planning profile SAPALL.
    Regards,
    Partha B.

    Hi,
    Try 0CO_OM_CCA_1.

  • Reduce Remaining Order Planned value for services with PO

    Hi guys,
    I'am looking for a way to reduce the remaining or residual order plan value for a network activity with services where the amount on the PO is below the planned value. If for example the planned value amounts up to 1000 and the PO has been reduced due to negotiations to 900, a remainder order plan of 100 remains on the network activity till the activity is technically closed.
    Is there a way to reduce the ROP when a PO exists for the network activity?
    Thanks, Geert

    We are combining an early visibility of all costs and a strict budget availability control with a formal procedure for project managers to request additional budget.
    We have more and more projects where a part of the budget remains blocked in ROP for service activities because the planned value was more pessimistic than the real PO amount. Since these service activities are typically executed at the end of the project that part remains blocked. Of course the project managers want to use that marging elsewhere without having to pass a request for additional budget.
    We have no issue with the network activity planned costs remaining visible, we just want the ROP to be 0 when a the purchase requisition for the service activity has been transformed into a purchase order. In the above example 100 of the budget would be freed for other use.

  • How can I see planned values for services in PS reports?

    Hi experts.
    We are implementing PS for a mining company; in our process, project designers plan materials and services in networks and then get planned values for budget requests.
    The problem I am facing is that I cannot see the planned values from services in the plan values reports. No value is exhibited for version 0 if I plan only services in a network. For materials planning I can visualize planned values normally. The network is not released. On example of planning values report that I am using is s_alr_87013533.
    Does anyone know how to correct this problem with PS configuration?
    Any help is welcome. Thanks!
    Rafael

    for planning services I am assuming that you are using service activity
    check if determine plan cost is set up in the network header
    secondly make sure that the plan costing variant is set up with the valuation variant  to define where to get the plan values from

  • Planning Values for past calender month

    Dear all
    My planned values for past month will be moved out of Planning version.Where can i view my planned values for the Product group and materials for the past months/year.
    S Anil

    HI
    You can check History of PIR through MD62 itself.Select particular row, Goto Menu, Select Item History(Shift +F6).
    Or
    You may pls execute transaction MD73.
    Plz select option "3 :History Planned ind reqmnts " in the display options and execute the report.
    Regards
    Anupam Sharma

  • Asset still showing planned  value for closed fiscal year.

    *We have a situation:-  After we ran depreciation for Dec 2009, there was a credit memo posting done in the system for a particular asset.  Now, the fiscal year has been closed for 2009 and 2010 is opened. Jan and Feb depreciation posting has been done for the asset for year 2010, but the credit memo posting is still stuck as planned value in the 12th period of 2009. How can we take care of that?  I canu2019t run unplanned depreciation for 2009. Is there a better way to take care of this?  I thought about opening year 2009 for the asset (ccode) and then running unplanned depreciation. Will that be a problem? If yes, what other solution can be proposed.*
    *Appreciate the response.*

    Hi,
    If it is not possible to open the fiscal year because audit          
    has already been completed we have a workaround which is not quite   
    correct from the legal side ist thereport RACORR20_A from note 29694.
    If in table ANLC there are differences between posted and planed     
    depr. the report simply makes: planed = posted.  
    The correct way would be:
    ->  Reopen your GL for FY 2008 via OB52.      
    ->  Recalculate values  (RAAFAR00)                                  
    ->  RAPOST2000                                
    ->  RAPERB2000                                
    ->  RAJABS00                                  
    Regards Bernhard

  • Asset Depreciation Planned values

    Hi Everyone,
       There is a requirement for us to pull planned as well as posted depreciation values for assets. The input for the program would essentially be Fiscal Year, selected list of asset class & cost centers. We are using the FM 'AM_SHOW_POST_DEPR' to fetch posted & planned values. Now the issue is that, since not many key fields are provided, the report takes so much time to fetch the required assets and its posted / plan values. On doing a more close analysis it was found that 75 % of the data fetching time is consumed by the FM 'AM_SHOW_POST_DEPR'. Is there any other function modules / method to perform the activity done by this FM, so that the performance can be improved, or if possible can somebody provide the logic involved in asset plan data projection.
    This FM returns the values which can be seen in posted values tab of the transaction code 'AW01N'.
    Regards,
    Kiran

    You are talking about dep planned values thus this is not posted as actual values?
    When the actuals values are posted there is longer planned values.
    When you want to make changes you can use the transaction:
    ABZU - Write-Up
    When you want to do this you should re open fiscal year 2008 for asset accounting. Following on this you have to do the fiscal year closing again for 2008 and 2009.
    This action will create postings in FI in 2008 and 2009!!!!!!!

  • Depreciation Planned Values missing in AW01N

    Hi ,
    we have a scenario in which few assets is not showing any depreciation values for period 9 (i.e. post/planned), instead the depreciation value period 9 is transferred to the period 10.
    Example: if depreciation value is 100 EUR for all the periods (1-12) and the depreciation run is successfully completed till period 8 for an asset. when we analyse the period 9 planned values in Asset Explorer screen, the entire row is missing and the period 10 is showing with a planned value of 200 EUR (inlcusive of period 9).
    Any solution to rectify this scenario ?
    Regards
    Govindarajan

    Hi
    In AFAB
    1. PLANNED posting run
    2. REPEAT
    3.RESTART
    4. UNPLANNED posting run
    While claculating dep which dep key you select from the above fileds. check it properly
    Thanks
    Anil

  • Depreciation not run for single asset-Why

    Hi Experts,
    Could anybody advise me why I am unable to run depreciation of single asset,(AFAB and repeat run used)
    However.I can ran depreciation of all assets of the company code(all are working fine),
    So Please suggest me how can I run depreciation for a single asset (Any specific configuration?)
    Note:-
    When I am checking AW01N I found depreciation of a asset has been posted for period-15(spl period)
    But for other asset -depreciation  has not been posted for period-15(showing planned only and revaluation amount also showin in plan ,done through AB01)
    So I am trying to post the depreciation for the period -15,
    So that after depreciation  posting revaluation amount also can go in posted amount(revaluation amount showing in plan only as depreciation has not been posted for the period-15)
    Please advise
    Thanks and Regards

    Hi,
    As per standard SAP, depreciation can be run at company code level and not at asset level.
    If you just want to check the nature of posting, you can give a single asset and run in 'Test Run' mode.
    Regards,
    Sridevi

  • Insurance values for transferred assets

    Another question, please.  When transferring an asset, the current insurable value of the newly created asset is the value in depreciation area 49 (insurance) of the old asset.  We would like the base insurable value that is showing in the master data insurance tab of the old asset to be the current insurable value of the newly created asset.  Can we do this?

    Hi,
    Please refer to the below thread.
    How can we update current ins value to match insurance depr area?
    Regards,
    Srinu

  • Can not run AFAR for all assets

    We have recently migrated and yet to post first month depreciation.  We have changed the depreciation key in one of the depreciation areas due to some requirements. Now if I want to recalculate the planned values for all assets in that asset class/depreciation area system is not allowing.  The background job says not allowed in production system.  It is allowing to do asset wise.

    That's too bad.
    Polling is not permitted here per the terms of use.
    A simple search of the forums would reveal if others are having problems.
    If help is truly desired, try providing some details of the problem that is occurring.

  • Asset value for Calculation of Tax Depreciation

    We have been told that many of the assets created as of 1/1/2008 have a different (lower) tax value than their beginning book value.  Book value is correct for standard book depreciation.     Is there a process to update the tax value of assets created in SAP similar to the transaction AS92 used to update values for Converted Assets?
    It was suggested that we use the method of Unplanned Depreciation tcode ABAA with TTY 642/652 to change the tax value of the asset.  When I tested this I found the various tax depreciation methods were calculated based on the beginning book value for year 1 and not using taking the special depreciation into consideration until subsequent years.   This is using Depreciation Area 10, MACRS, Dep. Key M200.
    Is there a better method of altering asset book value for tax purposes or a better way to alter the tax depreciation calculation so it takes Unplanned Depreciation into consideration during year 1?
    Current simplified tax depreciation example:
    Beg. BV $1,000
    unplanned dep posted $100
    tax depreciation for year 1 $100
    tax depreciation for years 2-10 $88.88
    The preferred depreciation is $90 years 1 - 10.
    Thanks for your assistance,
    Jeff

    I think I had the cart before the horse on this problem.  The correct way to look at this is what is the best way to get the correct "Net Book Value" and not the correct tax depreciation posting as it never actually gets booked.  
    By knowing the incorrect Beginning BV, the rate depreciation is applied in year 1 and finally the desired Net BV value at the end of year 1 for tax purposes I am able to calculate the correct Unplanned Depreciation for tax to make everything work out correctly.
    correct beginning tax BV $1,200
    Beginning Asset Book Value $1,800
    depreciation $360 (20% of BV)
    Unplanned depreciation  $?
    Net BV for tax at end of Yr1  $960 ;  or  1,200 - (1,200*.2)
    With the know values above that makes my unplanned depreciation for Yr 1 to be $480.  Year 1 and all following years depreciate correctly after the Unplanned Depreciation is posted.
    I am marking this as resolved unless someone sees an error in my thinking.
    Thanks,
    Jeff

  • Planned depreciation value for each period

    Hi,
    Where can I get the planned depreciation value for each period? I need the fields for customised report.
    Thank you

    Hi,
    You can get the dep planned values for the each period by using SAP standard report S_ALR_87012936.
    In the selection screen of that report, click on All selections button on application tool bar. Then you will be able to see the all the available fields for selection.
    Choose evaluation period as Month.
    Now execute it. After getting output, you need to go for change layout and adopt fileds like Dep 01-2010, Dep 02-2010, Dep 03-2010....Etc till Dep 12-2010.
    This will fix your requirement.
    Thanks,
    Srinu

Maybe you are looking for