Depreciation Run for closed fiscal year

Hi All,
We bought some assets on 2005 through direct purchase and these assets are in under operation, but not having the asset master record in the SAP system.
Now we have decided to bring these assets into the system as the capitalised date is 10 Nov 2005 and for this purpose, we had created the asset master record and applied the t.code: ABNAN to post the values to these assets.
<b>"My concern is about how to provide the depreciation run to these assets for the closed fiscal year from 2005 to until Nov 2007.The present closed period in the production system is 2006".</b>
I request you to all kindly give your values on the above mentioned issue.
Thanks with regards,
Ran

Hi
Just give the dep start date as 10 Nov 2005 and run the dep for the current posting period the depreciation will get posted for the year 2005 and upto the current period,in the current posting period.
As the past reriods are all closed you cannot post dep in the year 2005.
You will have the whole dep for that particular asset posted in the current posting period.
Hope this helps
Good Luck
Hari

Similar Messages

  • Changing Depreciation Key for Tax for closed fiscal years -

    Hello,
    Hoping someone can help me with this question - Is it possible to change the depreciation key for closed fiscal years - we need to change it for Tax - books. And if yes - does it mean we need to open closed fiscal years ??
    Thank you,
    Richa

    Hi,
    you will need to open the FI and AA periods. After changing the depreciation keys do the necessary dep run and close the books in the correct sequence.There should not be problem.

  • How to get a Monthly Depreciation Simulation for next fiscal year?

    I need a report that give me the depreciation simulation for next fiscal year, but I need it monthly wise. I run report S_ALR_87012936 with report date 31.12.2011 and evaluation period = month.
    The report gives the error message AA669 Fiscal year 2011 is already closed in Financial Accounting
    I read that this report doesn't work monthly wise for future years. Is there a workarround?
    Best regards!

    Hi,
    I'm sorry there is only RASIMU02. Note 396974 describes, this is a missing functionality and there  is no workaround.
    Reports on derived depreciation areas that do not post any values to the
    general ledger are allowed with the evaluation period year. An
    evaluation using month, quarter or half-year is not supported.
    In general, the depreciation forecasted by monthly in report RASIMU02 are only for depreciation area which posts depreciation to GL. For non-GL posting area, we recommend you simulate the depreciation 
    in 'fiscal year' mode. if you simulate the depreciation 
    Basically RASIMU02 is NOT designed to provide period simulation for these non posting areas. This because RASIMU02 uses for periods which have been posted already the created ANLP. But ANLP´s  are not created for non-posting areas. So in these periods where   a depreciation run had been executed already, RASIMU02 will not show
    values.                                                                               
    For AA 669 please see:
    Best Regards Bernhard
    Edited by: Bernhard Kirchner on Nov 25, 2010 9:20 AM

  • Without run depreciation they have closed fiscal years

    Hi all
    In my development system without Depreciation Run they have closed fical years.
    They did not run depreciation from 2003 and 02 period.
    present fiscal year is 2007.
    How can go back and how can i run depreciation from 2003. Please tell me clearly.
    It is very urgent.
    Thanks in advance.
    Krishna

    Hi,
    as far i know,
    you cannot close fiscal year without running depreciation until period 12.
    you said that your present fiscal year is 2007? is it FI Fiscal Year or Asset Fiscal Year?
    If 2007 is FI fiscal year and your Asset fiscal year is 2003 then you want to run the depreciation for 2003, You must open FI fiscal year for 2003 until 2007.  Use t-code : OB52 to open FI fiscal year.
    You can check the last closed fiscal year for ASSET in t-code : OAAQ.
    Hope it can help.

  • Asset depreciation in a closed fiscal year

    Hello,
    After closing fiscal year 2010 we noticed that asset "A" start depreciation date was incorrectly set to December, 15.
    Now we have corrected this date to December, 1. SAP have re-calculated the depreciation so we have aditional USD 600 planned for December. (we have UDS 600 posted + USD 600 planned).
    Is there anyway to force those USD 600 to be posted on the new fiscal year 2011?
    Is there any other way to arrange our depreciation issue withhoul opening 2010 for posting?
    Thank you in beforehand.
    Juanma.

    Hi
    I believe, OAYF is relevant for recalculating asset accum dep during Legacy data transfer.... I dont know if it would help in this case
    If you have not done the FY 2010 closing, system wont allow you to close till the time all planned depreciations are posted...
    Refer note 619969... You can run AFAB for Period 13 and post the dep in Period 12.... After that, do a balance carry forward
    However, if you dont wanna post in 2010 any more, then dont change the Dep Start date.... Let it remain as Dec 15.... You can post Unplanned dep for Jan 2011 using ABAA - Followed by AFAB (Unplanned option)
    Br, Ajay M

  • Asset still showing planned  value for closed fiscal year.

    *We have a situation:-  After we ran depreciation for Dec 2009, there was a credit memo posting done in the system for a particular asset.  Now, the fiscal year has been closed for 2009 and 2010 is opened. Jan and Feb depreciation posting has been done for the asset for year 2010, but the credit memo posting is still stuck as planned value in the 12th period of 2009. How can we take care of that?  I canu2019t run unplanned depreciation for 2009. Is there a better way to take care of this?  I thought about opening year 2009 for the asset (ccode) and then running unplanned depreciation. Will that be a problem? If yes, what other solution can be proposed.*
    *Appreciate the response.*

    Hi,
    If it is not possible to open the fiscal year because audit          
    has already been completed we have a workaround which is not quite   
    correct from the legal side ist thereport RACORR20_A from note 29694.
    If in table ANLC there are differences between posted and planed     
    depr. the report simply makes: planed = posted.  
    The correct way would be:
    ->  Reopen your GL for FY 2008 via OB52.      
    ->  Recalculate values  (RAAFAR00)                                  
    ->  RAPOST2000                                
    ->  RAPERB2000                                
    ->  RAJABS00                                  
    Regards Bernhard

  • Depreciation run for previous years

    Hi Experts,
    I am in Development system where the depreciation run has not been carried out since 2007 as per OAAQ. Now when I try posting depreciation for year 2008 period 1, it throws this error "You can only post in new year after closing previous year". However, 2007 is already closed.
    Again when I try to close the FY in AJAB, it throws this error "No year end close is necessary for co. code XXXX".
    Also, I don't find any table entries for TABA and as per table T093b 2007 is the closed FY.
    So, my question is how can I carry out the depreciation run for all these years to bring the system to current FY.
    Additional information you might require is OB52 is having period open from 1/2014 to 12/2016. and Planned ordinary depreciation has been carried out for some of assets till 2009 as I can see in table ANLC.
    Thanks in advance
    Regards
    Sukham

    Hi Sukham,
    ok, the problem is that you have values for the last posted in T093D, which may come from a legacy data takeover.
    You have 2 options right now:
    1) Implement and run the correction program from note 144441          
    2) Either clear or set the last posted depreciation period in the IMG for FI-AA legacy transfer to 12 (or use the correction program from note 26073)
    Regards,
    Markus

  • Retired asset - cannot run standart report for closed fical year

    Hi there,
    I was just wondering how to run standart asset report (Y_T11_68000004, AR02) for closed fiscal year in case of the asset was retired during this year.
    As I know report can be run only with last date of closed fiscal year (12/31/200x) otherwise got message AU116. But when I have asset retired i.e. in 30/10/200x the report for this year is empty and cant see the movements data.
    Any ideas? Maybe some settings for asset history report, or is there another report for movements for previous years.... ?
    Thanks a lot!

    Hi,
    start the asset history sheet, there you can see all information.
    Alternative is to create an own query on logical database in SQ01.
    Regards,
    Markus

  • Planned dep in closed fiscal year

    Hi
    We have done a change(reduced the useful life) in the useful life of the asset in the Fiscal year 2009 in the  month of June,which impacted the  previous year depreciation amount.The planned  dep value got increased in december 2008 .In the posted value tab in asset explorer for year 2008 it displays the planned dep in dec 2008 which is not yet posted.We donot need this depreciation to be posted.We need to delete the planned dep.Financial year and Asset year till 2009 are closed.
    Please advice how to get the planned dep line removed from year 2008 which effects the net book value.

    Hi,
    Are you absolutely sure the changes were made when the fiscal year was closed. Maybe you need to also check if the depreciation area(s) affected was/were open at the time (OAAR). It should not be possible: if the fiscal year and all depreciation areas are closed, changing the useful life should not affect these closed years/depr.areas.
    Changes to depreciation conditions (e.g.useful life, dep.key) only affect the planned depreciation in open fiscal years. There is no specific transaction.
    The adjustment for the depreciation of the closed fiscal year will be reflected in an adjustment posting in the next period due for depreciation posting in a catch-up posting (or smoothing if indicated). For the open fiscal years the newly calculated depreciation will be distributed equally over the remaining useful life.
    Therefore it sound to me very peculiar that planned depreciation should have been created in your closed fiscal year due to a change of useful life. Please review your change documents to ensure depreciation areas and fiscal  years were closed at time of change u2013 and have not been reopened either via OAAR or OAAQ.
    To answer your last question regarding if change of useful life will affect deprecation in 2010:  provided that it is the only open fiscal year and is in fact the current fiscal year, then yes, it will affect the planned depreciation in 2010 and in the remaining useful life.
    Kind regards,
    Brigitte

  • How to do the Manual Depreciation for Closed Fisical Year (2009) in Feb2010

    Hi Experts,
    One Asset Start Using from 30.06.09.
    Capitalized Date is 30.06.09.
    But Asset (invoice) is Created, First Acquisition Date is 31.01.10.
    Manually Entered the Depreciation Date is 30.06.09.
    now i have to run the depreciation previous year (7months) depreciation.
    Asset 2009 fiscal year is closed.
    system posted the jan 2010 dep.
    How can i post the depreciation ?
    Thanks in Advance.
    Edited by: 69veera on Feb 24, 2010 8:00 AM

    Hi
    Try OAAQ to open the previous year and then using ABMA post manual depreciation. Also the FI period has to be open in OB52
    Thank You,

  • Depreciation run for Previous Year

    Hi all,
    I am trying to run depreciation for the previous year 2009.
    I tried the following:
    On AFAB I gave the year as 2009 and the period as 01, and checked the planned depreciation check box.
    Got an the following error:
    'Only an unplanned posting run is possible in this fiscal year'
    Then I selected unplanned run and ran the depreciation, still it was getting the another error
    saying you can only post to period 12.
    Then I changed the period to 12 and ran it and was able to run the depreciation fine.
    But now I want to run for the other periods say period 10 and period 11. and now I am getting the following error.
    ' Period 010 is already Posted'
    does that mean that we cannot run a depreciation run for a earlier period, if the latest
    period  is already run??
    If not how can I run it for the  other periods 10 and 11??

    Hi,
    You can only run depreciation for the 12th period only.
    Once 12th period's planned depreciation run was performed, then it is not possible to run any kind of depreciation with an earlier period number.
    But you can run the 12th period again in repeat mode, in case you have posted any back dated entries after the 12 period'a planned run with an asset values date, which falls before 12th period.
    Thanks,
    Srinu

  • Asset Report to check periods in Closed Fiscal Year

    Hi Gurus,
    Would want to check what other standard SAP t-codes that could be used to check the periods for the closed Fiscal year in asset reporting? i.e. FY 2008 closed, would need to check asset balances, NBV, etc for period 7, system prompts an error and could only execute for period 12.
    Appreciate feedback
    Many thanks
    eddie lim

    Hi
    If you are using the report S_ALR_87011963, following is the limitation for it.
    You cannot run a report for any day you choose within a period. The
    following restrictions apply to the report date:
    o   If the report date is in the past, or in the current fiscal year:
         You can use the end of a fiscal year or the end of any period as the
         report date. If the fiscal year is already closed, you can only use
         the end of the fiscal year as the date.
    o   If the report date is in a future fiscal year:
         The system always uses the last day of the fiscal year as the report
         date.
    o   If the report date is the first day of a fiscal year:
         To ensure that the values for the beginning of the fiscal year are
         same as those for the end of the previous fiscal year, the
         system runs reports with the report date 1/1/YYYY for the date
         12/31/YYYY-1 (the same applies for a non-calendar fiscal year).
    If you want to run report for forcating depreciation and NBV, use TCOD - S_ALR_87012026
    Thanks
    GG

  • Closed fiscal year

    Hi,
    Could someone advice me on this situation?
    I have created new company code by copying old company code. I have setup the configuration for GL, AP, AR, CO and AA. Then I have tested the standard transaction including asset depreciation run in QA system.
    Client gave me the error when they are trying to test asset transfer (AS91). The error belong to last closed fiscal year.
    My question are:
    1. Can I change take over date to early year as 2005? Actually closed year is 2007 (copying from old company code)
    2. Is there any effect to depreciation of asset?
    Please advise and point will be reward for helpful answer.
    Thanks and Best Regards,
    Bird

    Ideally asset takeover date must be in the last closed fiscal year.  If you give a date in 2005 as Takeover Date system expectes depreciation postings in 2006 and 2007.

  • Transfer on last day allowed only in closed fiscal year

    Hi Guru,
    Client kept asset transfer date as 31/10/2010 first, uploaded some asset on this date, due to some reason asset uploading was not completed for all the asset. so all the asset value which was uploaded on 31/10/2010 was done as zero.
    Client took decision to upload all the asset on last day of FY 10-11 i.e 31-03-2011. transfer date was changed as 31-03.2011 and moved up to quality, unfortunatly rquest was not moved to PRD and while uploading to PRD again 25 asset got uploade  by transfer date as 31/10/2010, when realized transport req of change transfer date is moved to PRD and abt 50000 asset of total 70000 asset got uploaded.F.Y 2010 was closed while uploading this assets
    Year 2010 was again open for posting of cj88 transaction.
    When we are uploading balance  assets in the system  getting error message Transfer on last day allowed only in closed fiscal year
    When tried to close FY 2010, system is giving message ' Depreciation not posted completly' for 25 assets.
    i tried to do value as zero for these asset through as92 but system agiain giving message Transfer on last day allowed only in closed fiscal year
    so situation is we are not able to close FY 2010 and thus assets are not getting uploaded. if we run depreciation for said 25 assets for year 2010 it is not proper because actual  transfer date is 31.03.2011
    Please Help
    Regards,
    Shekhar

    hi,
    go to customizing and under asset data transfer - parameters for data transfer - date specifications - specify transfer date/last closed FY--- you need to place the last day of the period where you have last run depreciation for the legacy system and make sure that I am assuming at this stage will be the previous period or this period.
    rgds,
    jay

  • Change in Specify Transfer Date/Last Closed Fiscal Year in Asset Accounting

    Hi,
    While uploading the asset master data and values,I have given the Specify Transfer Date/Last Closed Fiscal Year date as 31-12-2008.But as per the fiscal year 4-4-5,2008 closed on 03-01-2009.
    what are the consequences,If we change the Specify Transfer Date/Last Closed Fiscal Year date from 31-12-2008 to 03-01-2009 as the 2008 closed on 03-01-2009.
    Kindly give me some inputs regarding this change.
    Thanks
    Supriya

    Hi
    Please note
    I you change the transfer date to current FY date , system will not allow u to upload data in PY.
    See the below
    Transfer Date
    This date determines the status of posting to be used for the
    transfer (posting up to this date will be included in the transfer), not
    the actual date the data transfer is carried out. This specification
    also determines whether you want to perform the transfer during the
    fiscal year (with transfer of posted transactions/depreciation in the
    current fiscal year) or at the end of the fiscal year (without
    transactions).
    If the transfer date is not the last day of the fiscal year (according
    to the fiscal year variant in FI), the system interprets this as
    transfer during the fiscal year. The system cannot transfer any
    historical transactions. It can only transfer cumulative values from the
    end of the last fiscal year, and the transactions in the current fiscal
    year (the second is only possible for transfer during the fiscal year).
    Example
    transfer date = December 31, 1997
    => last closed fiscal year = 1997
    Specify Last Period Posted in Prv.System (Transf.During FY)
        You must specify the period up to which depreciation was posted in the previous
        system. This period refers to the posted depreciation that is to be
        transferred during old assets data takeover.
    Thanks
    GG

Maybe you are looking for