Depreciation run from the posting date

Hi Team
My client want deprecition to be posted from the Posting date instead of start date of the document period
he is trying to post assets through F -90 it calculates depreciation from the
start date of the doc. period
Eg., Asset no 8000000049
Document date-11.11.09
posting date-21.11.09
depreciation is calculated from 01.11.2009 but he want from 21.11.09. further
if the document month and posting month are differenet the depreciation
is getting calculated from the document month.But he want depreciation to be posted from posting date only in both scenaio's
Kindly give us info -any config changes can be done, give necess. steps to follow
thanks
Bbindu

Hi,
Please go to your asset master (AS02), and see which dep key is assigned to your book depreciation area in depreciation areas tab.
Then set your COD with OAPL.
Go to AFAMA and choose your dep key, which you found in your assset master, double click on the dep key...
There one check box will be available as Dep to the day...select it. SAVE
Now check your asset in AW01N, now it will calculate dep from asset posting date.
Thanks,
Srinu

Similar Messages

Tax Code removed on changing the posting Date in Purchase Order

Dear All,
This is with reference to the Purchase Order Document tax part, the document has been defined with the approval procedure and document series followed as annual series. The document series is linked to the period indicator as I am using the monthly series for the A/R & A/P Invoice.
Now some Purchase Order was generated in the last month i.e. 30 NOV 07 which has gone for approval. These document are approved in the current month (Dec 07) & user are trying to add the records it displays the message as "Date deviates from permissible range [Purchase Order - Posting Date] [Message 173-11]" as the period indicator is changed to Dec 07 in document numbering.
The problem is when user changes the document date to Dec 07 for posting; system removes the tax codes, which is available in the document. Now as this is approved document user is not able to change or renter the tax codes.
In this situation what can be done as the same case will again happen for the next month.
Pls. provide the solution / work around for this problem.
Regards,
Yogesh Jadav

hi yogesh,
Cancel/Close the created purchase order.
First you should change docduedate in posting period upto december 2007/end of fiscal year,by following the below path.
(Administration->sytem intialization-> general settings--> posting period tab)
Create a new purchase order.
Send it for approval,authorizer can change date as required,
once the posting date changes,tax code get refreshed,authorizer
need to select tax code once again.
Tax code normally get refreshed when you change posting date it's normal
system behaviour.
After authorizer does above changes,he can approve purchase order.
Once purchase order is approved,orginator can add it as purchase order in draft stauts.
After approval we can not do any changes in purchase order.
Hope my solution will solve the problem.
Thanks,
With regards,
A.Jeyakanthan

Problem with the Posting Date of Goods Receipt or Invoice Receipt for PO

Hi All,
I am working on 2LIS_02_SCL - Purchasing Data (Schedule Line Level),
For our report, we should get the scheduled PO quantity,actual PO qty, Scheduled date and actual date in the report.
we are getting all these fields from the above extractor...
For a PO which is opened (Delivery Completion indicator not set) - we where getting all field as in ECC(ME23N)
But for a PO which is finished(Delivery completion indicator is set) - we where are getting actual GR qty,planned qty,planned or scheduled date at schedule line level.But we are not getting the Posting Date of Goods Receipt or Invoice Receipt for PO from history EKBE for all the schedule line.
ex:
for open PO
PO num         item num   schedule line    Planned date   actual date difference actual qty planned qty difference
450002432   10                        1              01/10/2011    02/10/2011       1 day          100             100             0
                                                 2              02/10/2011    04/10/2011       2 days        200             400            200
                                                 3              03/10/2011    07/10/2011       4 days         300            300              0
For the same PO when it is Finished or completed(Delivery completion indicator is set)
PO num         item num   schedule line    Planned date   actual date difference actual qty planned qty difference
450002432   10                        1              01/10/2011    07/10/2011       6 day          100             100             0
                                                 2              02/10/2011    07/10/2011       5 days        200             400            200
                                                                03/10/2011    07/10/2011       4 days         300            300              0
for all the schedule line its displaying the last posting date(i think its taking from EKKO table)
Is there any possibility to get that posting date history ....

You can have multiple receipts against a PO schedule line, but this extractor is not meant to go to that level of granularity. Please try to use 2lis_02_sgr instead which provides goods receipts per PO schedule line.

Unable to create a billing document , have to change the posting date

Dear All,
                  I have performed the following steps:
                 1. I have created Customer
                 2. Created a material.
                 3. Linked the customer to the material
                 4. Post initial stock for the material.
                 5. Create a Sales/Order.
                 6. Displayed the sales order and recorded the scheduled delivery date.
                 7. Created the delivery for the sales order.
                 8. Transfer the stock from the warehouse management
                 9. And update the order.
While updating the order I selected post goods issue and it would not go ahead because the posting date is not there in the posting period. Where do I change the posting date. I could not find it anywhere. I did not enter the date anywhere.
Thank you,
Sandhya

Hello Sandhya
Here is how MMPV works.
Lets say I am at the end of the May month 05.31.2009 so lets say period corrresponding to this is 05/2009.
Now if you want to post data in June perios 06/2009 should be opened.
Here is what I will do in MMPV
Enter my company code
Instead of using periods I will use date which will be 06/01/2009 (mm/dd/yy format in my example)
Check radio button check and close period
Click on remaining checkboxes.
Execute
The effect of this will be that the previous periods will be closed and June will be opened.
In your case since no one has opened periods after 2006 so may be you will have to repeat this step for each month until you reach current period if that is the one in which you want to post goods issue.
Thanks
Vikas

Payment run with future posting date

Hi,
There might be a straight forward answer to this question, but for some reason I cannot get it to work the way I believe it should work!
Instead of processing payment runs every day we want to create the payment run only twice a week. However the value date in the payment instruction to the bank should be the actual due date of each invoice. This could result in 2 payment lines to one supplier.
I have found that by setting the indicator "Payment per due date" in the payment method it will generate these 2 payment lines.
The problem is that we also want the clearing document to be split into 2 documents each with the posting date to be equeal to the value date - for some reason I cannot get this to work?
I have looked at substitutionrules and activating an enhancement, but looks like is not possible.
I would have thought this is a standard requirement, but ?
Thanks for helping

Hi,
It seems to be that you have to create 2 payment runs.
Regards,
Svetlin

In MIGO , How to restrict the user to change the posting date?

Hi All,
In MIGO , I want the user to restrict from change in posting date i.e. user should not be able to change the posting date. The system should take to-day date only as a posting date.
Thanks in advance.
GP

Hi,
check this MBCF0005.
EXIT_SAPM07DR_001.
BADI being MB_MIGO_BADI.
Reward points
Regads

BAPI to change the posting data of invoice document

Hello All,
I need a BAPI to change the posting date of the invoice document (Type : RE, Generated from MIRA transaction). Do let me know if you can across a BAPI to do it.
Thanks,
Siva.

BAPI_INCOMINGINVOICE_CHANGE

MSC2n next inspection lot to be calculated from the production date

Hi gurus,
My query is
1. In Tcode MSC2n, next inspection lot is to be calculated from the production date and not from last goods movement date. is it possible to get next inspection lot to be calculated from the production date.
2. how to make automatic creation of inspection lot in SAP based on the next inspection date. Right not, it is being done manually using T-code QA07.
thanks in advance
regards
vb

To manipulate next inspection date use user exit QEVA0003.
To automatically create 09 inspection types use transaction QA05, schedule it to run in background at periodic interval

Function Module - Calculate 5 weeks lookup based on -7 increments from the Key Date

Hi Guys,
I am looking to create a variable on Fiscal Period/Year, that automatically populates the variable with the previous 5 weeks based on -7 increments from the key date , when the user runs the query .
For Example: If key date is 03/11/2014 need to get previous 5 weeks 03/04/2014, 02/25/2014, 02/18/2014, 02/11/2014, 02/04/2014. mm/dd/yyyy.
Is there any Function Module available/ please provide the logic code - can anyone help?
Thanks,
Suresh Narayan

Hi suresh,
Please once try with this approach,
Create a variable with variable represents : multiple input value, Processing type : customer exit ; variable is ready for input.
and write the below code :
if i_step = 1.
data : fdate type d ,
wa1 like line of e_t_range,
n1 type i.
n1 = 1.
if n1 <= 5.
wa1-opt = 'EQ'.
wa1-sign = 'I'.
wa1-low = fdate.
append wa1 to e_t_range.
fdate = fdate - 7.
endif.
endif.
Hope you got it,

Re:Query for no.of days delayed using Receipt from production posting date.

Dear SAP Experts,
I need a query to calculate no of days delayed by using Receipt from production posting date and prod.order due date..i have already done the query but there is no link for joining the tables.Is there any link to join the tables..
Plz Suggest a good query for this issue..
With Regards,
Revathy

Dear Revathy,
I think there is no need to link table if you just need calculate no of days delayed by using Receipt from production posting date and prod.order due date.
You may check this query with the above:
SELECT T0.ItemCode,T0.DueDate,
T0.DocNum, T0.CloseDate,
Datediff(dd,t0.DueDate,T0.CloseDate) Diff
FROM dbo.OWOR T0
WHERE Datediff(dd,t0.DueDate,T0.CloseDate) > 0
Thanks,
Gordon

Substitution method to change the posting date in FB50

Guys,
My client requires the posting date to be blank in FB50. I used substitution method to do so, but its validating only after FB50 comes into picture. I want the posting date to be blank as soon as the transaction is entered. Did any one come acorss such situvation?
Thanks in advance,
Isaac

Hi Smart,
When your user is on FB50 screen, ask him to empty the posting date field and from the menu choose System -> User Profile -> Set Data (yes, you read it right, it is Data, not date - and date is also data!!!). That will save blank posting date in user parameters (SU3). Exit FB50 and re-enter. You will see that Posting Date is blank, but is also greyed out. Don't worry, enter Doc. Date and press 'Enter' key. It will open up Posting Date field as initial and your user can enter any date he wants, provided the posting period is open.

LT01 - Is it possible to modifiy the posting date?

I would like to transfer some quantity of a material from one storage bin to another storage bin. Is it possible to set the posting date? Form LT01 transaction is not possible to set the posting date. System takes the actual day.
Thanks in advance.

Hello,
There is no work around to change the Posting date As i if try to move Matrial between the Bins by changing the Dates it always pick the Current system date and Time.
regards,
rakesh
Edited by: RAKESH ASHOK MANE on Sep 6, 2010 12:54 PM

I've set up an album in iPhotos; when I click on the slideshow it begins with the last photo. How do I get to run from the 1st photo like it use to?

I've set up an album in iPhotos; when I click on the slideshow it begins with the last photo. How do I get to run from the 1st photo like it use to?

If you're referring to the iPhoto application on a Mac then read Léonie's post in this topic and see if it might apply to your situation: iPhoto slideshow shown in reverse order: Apple Support Communities
Happy New Year

Can I change the posting date in CO13 to cancel a confirmation?

Hi all
I'd like to know how can I change the posting date using CO13.
So I have a confirmation in date 30/6 for exemple, but I'd like to cancel it in posting date 1/7, but the systems takes the date of the original confirmation. Can I change it any way?
Thanks in advance
Points will be given

Dear Roger,
this is only possible in case if the bookin periode is closed. In this case it's allowed to change the booking date in CO13 and the date field gets automatically inputable, normaly it's greyed out.
As long as the booking periode is open, the system automatically use the date from confirmation.
Hope this help.
Regards,
Sabine

Disconnected cable that runs from the mainboard to the headphone part

Good Evening! I am looking for help with a problem with my 4th generation ipod. Since it is no longer under warranty, I decided to replace the battery on my own and in doing so, the cable that runs from the main board to the headphone part disconnected. Is there any way to reconnect it and get my ipod running again? I've looked all over the internet for the past 2 hours and have not found relavent information to my problem. Any help would be greatly appreciated.

This is the forum for the new iPod Classic, not quite the right place foy your post. However, the best source of information for troubleshooting and take-apart guides is ifixit <http://www.ifixit.com>.
Good luck,
bd

Depreciation run from the posting date

Similar Messages

Maybe you are looking for