Depriciation for asset with limit on maximum value

Hello,
We have a requirement in which we have a limit on maximum value of the asset on which depreciation is allowed. For example is asset value is more than 100000 then depreciation should be allowed only for value 100000 and the depreciation should be spread across the useful life of the asset.
I have an asset having value 300000 and I am able to post depriciation only for 2 years (50000 each) whereas the useful life of asset is 6 years.
What I want is that the depreciation should be posted for 6 years with value (100000/6) 16666.67 each year.
Has anyone come across the similar business scenario earlier?
Any pointer to this will be of great help.
Thanks
Jyoti

Hi,
I found the solution.
IT can be done by defining the maximum value of the asset in the SPRO path
AA-> valuation mentods> further settings> define maximum base value.
Jyoti

Similar Messages

  • Report for Asset with only values (No Zero values)

    Hi All
    There is requirement where in the user wants to genenerate report for assets with  values .There should not be Zero balance assets  included in the output. In short only with values in the asset master the report needs to be generated. Can one have any idea on this .
    regards
    Navin
    Edited by: Naveen Rao on Jan 22, 2009 10:04 AM

    Hi
    Can you  please specify the report name.
    regards
    Navin

  • EXCISE DUTY/CVD FOR ASSETS with Act Assignment : A

    Hi
    claimable duties like Excise and CVD to be calculated for assets
    Here the asset procurement is done with asset PO where we give a asset no
    But my Excise/CVD is not calculated for this materials procured through asset PO ( account assignment A) coz iam not able to assign CHAPTER ID in J1Id for asset no, as it is accepting only mtnr.
    Please help me out
    Chris
    Edited by: CHRIS MM on Dec 29, 2008 6:55 AM

    Hi
    Assign a chapter id with blank field in material master and then check.
    Since there is no material master for Assets the blank field chapter id will be fetched.
    Chk and revert.
    Reg
    Raja

  • Create subnumber for asset which already has book value RM1.

    Hi everybody,
    Can i create subnumber for asset which has been depreciated until RM1 book value ? This asset has a few quantity and need to be breakdown to different cost center ? If yes, how ? AS11 or AS94 ?

    Hi,
    Thanks Andreas. However, the asset is an old asset (already reached RM1 book value). I have tried to use AS94, but hits an error " Legacy data transfer year is not last closed fiscal year 2007". FYI the take over date in the system is 31/3/1998 while closed fiscal year is 2006. Now we are in fiscal year 2007 (Apr to Mac). If i were to change the take over date to become 31/3/2007, is there any impact to the depreciation run for other assets in the system. I'm worried if i change the take over date, the depreciation will get haywired.

  • Restrict Access for Asset with Ubuntu

    Hello guys,
    now i have a problem for you and i hope, that you could help me.
    The ArtBox have some problems on my ubuntu system. The error message shows me "Restrict Access for Asset".
    Can somebody give me some tips, how the error could be recognize or how i can fix it?
    Thanks for the help.

    Hi,
    After you finish installing Artbox , you must now make sure that samba is setup correctly. I just plan to try ArtBox and ubuntu using virtualbox, hope it can work fine.

  • Credit memo for asset with depreciation posted

    HI,
    There is requirement to pass a credit memo for an asset.
    The asset was purchased on 01.04.10.
    And have been depreciated till 31.05.11.
    Now the client want to pass credit memo for the full acquisition value.
    My issue is when I am passing the entry through ABGF - ... in Next Year
    System is throwing error stating the value is going negative.
    Then we passed the write up for the depreciated value as on 01.04.10.
    Still system is giving the same error message.
    Please suggest on what date should I pass the write up to clear the whole posted depreciation and pass the credit memo.

    Hi,
    Go to asset master change, in depreciation are tab double click on depreciation are number  then select negative values allowed check box
    Hope this will help you.
    thanks!

  • Depriciation for Asset

    Hi,
    I have one issue in which asset which was capitalized by AUC has capitalization date as 1 July 2008 with 5 years life and which was settled in the year Feb 2011. Now my user wants to calculate the depreciation from the month of Feb 2011 but as per the system configuration it is calculating from 1st July 2008.
    The above querry was posted in toolbox by someone but i also have the same doubt on this issue, can anybody give the solution for this
    Thanks in advance
    Kunar R

    Dear rlrk75
    Please check once again your asset master (AS02 - change mode) under depreciation tab. check  the ordinary depreciation start date (were you given proper date or not). system will calculate depreciation from this date
    Regards
    shankar

  • Depreciation Amount for Asset taking in Round-Off Value and not in Decimals

    Gurus,
        When I run the Depreciation, the System is calculating amount in Round-off and not in decimals
        Whereas I have knowledge that It shud calculate in decimals or to the exact amount whatever it comes, but the system is automatically rounding -off the value to the nearest ruppee
       So please inform about what has gone wrong in my case.!!
    Regards,
    Nimish Agarwal
    New Delhi

    Dear:
               Go to OAYO and do the do the necessary configuration there. Field Arithmetic Rounding
    Using this indicator you specify that rounding should take place according to the rule: tenths up to and including 4 are rounded downward to the next whole number, starting with 5 they are rounded upward to the next whole number.
    This refers to the decimal places of a currency.
    Example: 4.49 is rounded to 4
    4.50 is rounded to 5
    Check the other
               Regards

  • Montly depreciation simulation does not run for asset with custom depr keys

    Hello!
    Some assets in report S_ALR_87012936 display annual depreciation simulation even if only a period of the year is selected. For those assets a custom depreciation keys is defined. Is that a problem?
    Could I found a way to simulate depreciation for a part of the year for those assets yet?
    Thanks
    Giovanna

    hi,
    ccheck your settings in trx. S_ALR_87009113
    A.

  • Which table contains net book value for Assets created with AS91.

    Which table contains net book value for Assets created with AS91.
    I have a problem locating where the net book value is stored in SAP.  Is it simply calculated and not stored in any one place?  I am trying to predict how SAP will calculate the net book value for some assets we plan on converting, but my formula doesn't always work consistently and I have not idea what is going on.  If it is stored in a table some place, can anyone please let me know!
    Thank you all

    Hi anar.samadzade & Michael Stewart
    It is not possible to directly get net book value of an any Table. You must migrate the gross book value (acquisition cost) and the accumulated depreciation. SAP will then calculate the NBV.
    Gross Block & Accumulate Dep you will get from Table: ANLC
    http://fixedassetsaccounting.net/migrating-fixed-assets-into-sap-a-harlex-guide/
    Dear anar.samadzade Ask Questions politely
    Regards
    Viswa

  • Automatic settlement rule for receiver 'Fixed asset' (with out IM)

    Hi Experts
    I am working with project settlement to a fixed asset.
    I have defined a selttlement profile in which, FXA is the only valid receiver.
    Please note that we do not use Investment managent and hence no automatic AUC.The predefined asset to be used for settlement.
    In this situation i am unable to generate settlement rule automatically as like the case with CTR.
    The below message is experienced.
    "Enter a distribution rule for Asset without a validity limit"
    However i have manually maintained the settlement rule with specification of appropriate asset as receiver and settled.
    In this scenario, how to ensure that the settlement rule is automatically generated, any where can we refer the fixed asset?
    warm regards
    ramSiva

    Hi,
    Settlement rule cannot be automatically maintsined, you have to maintain manually, for example if you want to settle to fixed asset, how the system know to which fixed asset it should settle. You have to maintain settlement parameter manually.
    Regards,
    Sreekanth

  • Acquisition of an Asset with Negative value

    Hi Gurus,
    How to do acquisition of an asset with negative value?
    Please tell me the Tcode for doing this transaction.
    Please revert asap.
    Thank You

    Hi,
    The business scenario is.............
    We have to charge some interest on asset last year but we have not charged it.
    Now asset value is zero and if we charge interest on it, it will go to negative.
    That's we are thinking to create new asset with negative value.
    Hope this will help you understand.
    Please revert asap.
    Thank You

  • Where to down load assets with Asset Capitalization date and Book value..

    Hi All,
    What is table/Transaction code  to down load Asset with below details:
    1) Capitalization
    2)  Acquisition value
    3) Book Value
    4) Book Dep Value
    5) Cost center
    Thx In advance..
    Regards,
    Shirisha

    You can try the Asset History Sheet report S_ALR_87011990 (which has all fields except for cost center) and if you want additional fields you can choose to add new fields through the link [Include own fields in FI-AA standard ALV |https://wiki.sdn.sap.com/wiki/display/ERPFI/IncludeownfieldsinFI-AAstandardALV] the relevant report for Asset History Sheet should be Asset History Sheet -> FIAA_SALVTAB_RAGITT includes CI_REPRAGITT (out of RAGITT_ALV01). Else a quicker option would be to perform a vlookup process from another report that has cost centers like S_ALR_87011979.

  • How to delete an asset with a capitalization date inefaceable and no value?

    Hi all,
    An asset was created on the wrong asset class. I would like to erase it but this is impossible because of the capitalization date.
    Indeed, I cannot change the fields status variant of the capitalization date, it is compulsory.
    Furthermore, as this asset was an error, there are no values on it.
    I tried to enter a deactivation date, but this is not possible because of no acquisition performed.
    Therefore, I would like to know if it is possible to erase an asset even if a capitalization date has been entered in the master data?
    If it is possible, how can I do?
    Thanks for help

    Hi,
    This is the drawback in asset master, when you make cap date as mandatory for AS01 transaction.
    As a standard practice, cap date gets updated automatically when posting MIGO / F-90 only along with the qty.
    In your case, first ask your ABAP member to delete the values from cap date field from table ANLA. (Field Name: AKTIV) for your questioned asset.
    Then you can delete that asset with AS06 by choosing Physically delete the asset.
    This will resolve your issue.
    But if you make your field status as optional to cap date, then you must not got these kind of issues in the future.
    Regards,
    Srinu

  • Assets: provision for differences between APC and Market Value

    Hi,
    my current client needs to make a provision with the difference between the APC and Market Value in some assets (buildings...).
    Our idea is to use Valuation Area 02 in order to reflect those "Market Values" and create another Valuation Area = 02 - 01. With this area we will have the amount the we need to make the provision in GL.
    I just wanted to know if FI-AA has anything that could make those provisions automatically. I have looked into help.sap.com, customizing etc... and I could not find anything.
    Does anybody knows if there is a standard "provision function" for assets?
    I think that we will need to develop an ABAP program for this requirement...
    Cheers

    not solved but need to close it...

Maybe you are looking for