Zfield is not apearing in the batch input session ( Customer Master Record)

Hello,
We have added one Z field in the customer master record (sales are tab). But this Z table not appear in the Batch Input session(SM35). My user want to update this field for all the customers at once, but this Z field not appearing even in MASS transaction.
For your information, we have appended the KNVV table. Can any one of you give some suggestions on this.
Regards,
Srinivas.

It's rather easy via a custom ABAP program to wait for the end of a batch input session. Some codes were already pubilshed (look whole SCN for APQI-QSTATE).
What you can do is to select the sessions to be started via this custom program, and it will submit a job which will run in an endless loop until the last session is released. It might use a WAIT UP TO X SECONDS to sleep for a few seconds between each scan of session status.

Similar Messages

How to run the Batch input session(SM35) in background thru Report program

Hi Experts,
I am working in one modification report requirement ,the report is Mass upload will update and run the file via batch input session. The client requirement is to implement the report execution in background mode , the batch input session will process automatically (ie. the job runs the batch input session in background and process the session ends).
Currently, the report calls SM35 to write a batch input session and the user manually selects the session and record the transactions.
Once the Transaction enters and the selection-screen inputs are given, then the transaction executed in background mode and all the above batch input process to be implemented.
Please advise and guide me, how to proceed.
I need your guidance to proceed via Call transaction using bdcdata statement, if it can be achieved the requirement.
Thanks & Regards
San.

Hi Arabind Prasad,
Thanks for your inputs.
I know the process of the report Execution in background and job steps.
I want the inputs for how to upload thru Batch input session in background job and the session should also processed automatically
Currently the report logic declared like call transaction 'SM35' and skip first screen.Once the report (tcode) executed (not in background) It writes one session in SM35. The user should select the session and process the transaction manually.
The new requirement is, if the report (tcode) executes in background mode...what and how the batch input session should be declared and how it process automatically (like you said mode 'N').
Hope I am clear in my query.
Please advise.
Regards
San.
Edited by: San Learner on Mar 1, 2011 7:16 PM

SM35-Downloading the Logs for the Batch-Input Session

Hi Folks,
I have above 300 Batch-Input sessions imported, and most of them ended with errors, right now I am copying the errors from line to line into excel but this is time consuming. Does any body has a solution to download the logs created through the Batch-Input session into excel sheets. So that I can send through mail to my customer.
Any help would be appriciated.
Thanks in Advance.
Sanjeev.

Okay... I have one more crude way of downloading the log but this will only work if you have the new abap debugger available..
1. Go to SM35
2. Select the session and Click the log button
3. Select the log you want to download, activate debugging and choose display
4. Put a breakpoint at the statement "Call screen 1400."
5. Select "Switch to New ABAP debugger" from the Debugging option in the toolbar
6. Go to the "Tables" tab and enter BDCLM and hit enter
7. Click the "Services of the tool" option. This is the last of the 6 buttons available on the Tables tab besides the table control which displays the contents of internal table BDCLM
8. Choose "Save to local file" option on the following popup
Pretty lengthy and cumbersome approach but I think this is the only option available if you cannot migrate the program to production.
-Kiran

How to change the field sequence in Customer master record.

Dear Friends,
We are required to chage the sequence of customer master record fields that are available under different tabs of 'General Data', 'Company Code Data' and Sales Area Data.
Our client requirement is to place all mandatory fields in the first screen of customer master record. Here the intention is to save the user time instead going and clicking multiple tabs/screens to fill information on only one or two tabs. Please suggest us the availabe solution in SAP for this requirement.
Thank you
Raghu Ram.

Hi
Step 1: Take help of a FI guy and:
The fields can be suppressed by configuring through Financial accounting > Business Partners > Customers > Account groups.
Step2 : The challenge inyou project is to have a single tab with the allowed fields
A technical guy can only help you out on this . Again This would be a huge effort since first you need to change the code for customer master. As customer master is a source of data for various documents in SD , at each place you will have to do changes in th code...I don't think it is feasible.
Instead of doing this , create an external interface for transferring the value to SAP through BAPI. this would involve integration and may be as per defined SAP standards you can use CSV files or XML files for the integration process.
This would be a better option than fiddling with SAP system
Regards
Nikhil

How to see the Batch input session name in SM35 with User name.

Hi
Yesterday,User has created one Batch input session from FBWE and selected process button after that display errors only tick mark in SM35. Then the system displayed one error message"No Batch input data for screen SAPMF05A 0700".After that he came out from the screen. He dont know what happened.
Today we have verified in SM35. But there is no batch input session with his name. We have verified in incorrect screens and every thing in SM35.
We have verified in Table 'T045DTA'. There are some entries are there.
We dont know the session name also.
How we can find the session name created by the User.
We have not deleted any thing.
Please help me
Thanks
Ravi.

Hi Ravi,
Yes, you should be able to create a new batch job for FBWE. You can see your own batch sessions from SYSTEM ==> OWN JOBS
Regards,
Mike

SM35 - manual processing of the batch input session

Hello,
In SM35 I see that some batch input sessions were processed by user XXX-XXXX (user type:System) (in our case INT-3528) in N mode. The question is: how to determine the exact user who has really processed that session? We need to stop that - I guess - automatic processing of the sessions and process them manually.
Thanks for help,
Slawek

Hi,
also, you can check the logs directly in SM35. So if any documents were posted (or anyting updated in the system) information about what happened should be shown there.
If there were acounting documents (table BKPF), I think the user name will be the same system user "who" has processed the sessions.
I think that your basis team has set up the system in a way that batch input sessions are processed automatically. This is simialr when scheduled jobs are running under a pseudo user name (system user, IT user, not a real person behind). You can ask the basis team to switch off this automatic processing competely or only for selected sessions.
Hope that helps, points welcome
Csaba

How to export the Batch Input Session recording

Hi,
i want to export Batch Input Session Recording created by using LSMW from Developement server to quality.
Plz help.

Hello,
To move to the quality system.
First Import the lsmw in text file in development system.
To import LSMW Tcode u will find Extra option in menu bar from there choose IMPORT PROJECTS.
save the file in desktop.
Second to move to quality system
go to LSMW tcode in quality system.
use EXPORT Projects from same menu bar EXTRA then follow the procedure.
LSMW cannot be transproted

How to change the reconciliation account in customer master record?

hi friends,
i created customer master with wrong reconsiliation account in XD01. i failed when i am trying to change that reconsiliation account in XD02. it was suppressed. how to change the reconcilition account in customer master data?

Hi,
Go to this path: Spro>Financial Accounting>Account Receivable & Account Payable>Customer Accounts>Master Data>Preparations for Creating Customer Master Data>Define Account Groups with Screen Layout (Customers)
Double Click on Your Group, Then Click on Company code Data under Field Status, Then Double click on Account Management, That screen you will find the Reconcilation Account, Select Requred Entry.
now it will coming Customer master.
It's useful assigne points as a way to say Thanks
Regards
gvr

LSMW- Batch Input session getting error

Hi All,
I created LSMW object for Tcode KO01 and its creating the Internal order as expceted.But even after creating the document the Batch Input session status is showing incorrect.No messages are also displayed in the log.
Please let me know why this is happening.
Thanks in Advance,
Savitha

Hi,
Detail Error Message is as follows:
No batch input data for screen SAPLIMR0 1110
Message no. 00344
Diagnosis
The transaction sent a screen that was not expected in the batch input session and which therefore could not be supplied with data.
Possible reasons:
1. The batch input session was created incorrectly. The sequence of screens was recordly incorrectly.
2. The transaction behaves differently in background processing in a batch work process than when running in dialog (SY-BATCH is queried and changes the screen sequence).
3. The transaction has undergone user-specific Customizing and therefore certain screens may be skipped or processed differently, according to the current user. If the person who created a batch input session is not the same as the person now processing it, this problem may occur frequently.
System Response
None.
Procedure
For 1: Either re-create the session or process it in expert mode. Correct the batch input program.
For 2. It is very difficult to analyze this problem, particularly in the case that the screen sequence or the display-only options of fields differ according to whether the transaction is being processed in the background or as an online dialog. It could also be that this kind of transaction cannot run with batch input.
For 3: Have the creator of the session process it. If no error occurs now, then this is a program with user-specific Customizing.
Regards,
ababfk

Batch input session Information message

Hi,
Is there any way to display information messages in a batch input session. Suppose I have a batch input session running on a particular transaction.If in a particular screen, I want to display an information message to the user that ' Particular sales order has been created on date xx'. Is it possible.
Thanks &* Regards,
Vishnu Priya

Hello,
It is not possible in the Batch input Session.
You can do it by <b>Call transaction</b>. But it not possible to give message at particular screen. Becuase we are only passing screen seq and data for the screen.
Like,
Call transaction Va01.
if something is there,
message I
endif.
regards,
Naimesh

Batch Input Session for RFUMSV50 is not getting processed.

Dear All,
When i am trying to transfer the Service Tax Inetrim account to Service tax final account with the help of the program RFUMSV50 the batch input session is getting generated without any error. But when i process the same in SM35 it is not getitng processed.
Please advice on this.
Regards,
Rajeswari Shankar.

Hello Rajeswari,
Yes, this is normal.
When batch input sessions is generated with any error, this does not mean that you can execute it after via SM35 without any error
Moreover, you have the option in SM35 to execute it and with option "display error only", so this means that it can happen that there is no error
For example, the profit center is mandatory, and it is missing in the document. In that case the system will display error and ask you to fulfill the profit center
Please tell me, which error you have (message number)
Thanks
Tarek

LSMW for Chart of Account: Field XSPEB not filled in batch-input session

Hi all,
we are using LSMW for importing the chart of account into a new system.
The LSMW project uses the report RFBISA00 for the creation of the batch-input session.
Some accounts need to be blocked in the new system. Therefore, we have the field XSPEB in our source structure and of course also in our target structure. But after the creation of the batch-input session the field is not included in the corresponding batch-input session.
Does anybody know why it is not set? I already debugged the program RFBISA00 but couldn't find the place where the data get lost.
Thanks in advance and regards,
Martin

Did your batch input end with save ( /11 ) or what ok_code are you using ?

At the time of Batch input session system asking business place and profit

Hi,
After doing the transaction f.26 interest calculation on customers (security depost) then we are running the batch input session there system asking business place and profit center there we are giving manually, my client having thousands of customers so they wants update these automatically.
is there any option for automatically updation for business place and profit center.
Kindly give me the solution.
Thanks &Reg
obi

There will be two options.
1. Customize default profit centre for GL
2. Write substitution for profit centre

FF67 Batch Input session not created

Dear All,
When I am key in the manual bank statement in FF67 system doesnot generate the batch input session in SM35. In FF67 in setting - specification I have selected 2 i.e. to generate batch.
Please guide me what might be the reason.
Thanks & Regards,
Bhadresh V. Shah

Hi,
This may be customization. Check setting made in
SAP Customizing Implementation Guide> Financial Accounting > Bank Accounting > Business Transactions>Manual Bank Statement> Define Posting Keys and Posting Rules for Manual Bank Statement > Create Keys for Posting Rules
here you have to give account symbol and text. This generates the sm35 session.
Warm Regards

How to check whether a batch input session is completed in ABAP program

I have created a ABAP program to create a batch input session (reference to RSBDCSUB). After the creation of the batch input session, I kick it to start and read the execution log. However, sometimes I cannot read anything from the execution log as the execution of the batch input is a synchronized process to the execution of my program, i.e. at the time being that I try to read the log of a particular transaction, that transaction is being processing / haven't start processing.
How can I check whether a batch input session is completed in the program?
The code that corresponding to the triggering of batch input session:
SUBMIT (SUBREPORT)
   USER MTAB-USERID
   VIA JOB MTAB-GROUPID
   NUMBER JNUMB
   WITH QUEUE_ID EQ MTAB-QID
   WITH MAPPE     EQ MTAB-GROUPID
   WITH MODUS     EQ 'N'
   WITH LOGALL    EQ LMODUS
Or is there any method to wait here until the process is completed before further processing?

Hi gundam,
1. Or is there any method to wait here until the process is completed before further processing?
There is no such direct method to wait.
2. Immediately after submitting in background,
   we cannot wait
neither can we LOOP and go on detecting
whether the b/g process has completed or not !
3. To over come such problems,
we have to use another technique.
4. we have to submit another
   job which will get triggered
   on event SAP_END_OF_JOB
   ie. when the original job will finish,
our new job will AUTOMATICALLY get triggered,
5. This new job / program
   will do the FURTHER actions !
regards,
amit m.

Zfield is not apearing in the batch input session ( Customer Master Record)

Similar Messages

Maybe you are looking for