Design Studio not reading plan data input - How to debug it?
I am using Design Studio, created a grid and using a Java program I am sending events info into EL. I checked in BAM object > Content and it is getting updated with the new data, however, the Update button in DS is returning with 0 rows updated.
I set the DEBUG log level in the BAM/*.config files but I still get no many debug details..
Is there a way to confirm/test the EL is working from DS?
Can anybody clarify to me what setup is needed specific to EL/DS that maybe causing this issue?
thanks in advance
Hi,
If your plan is reading data from a queue that java program is sending data to and updating a data object and the you have a grid, grid would not show anything.
Grid is only used to initially test whether data is coming through, once you have done testing you remove and put the BAM Insert/update transform to send data to BAM.
Also you use the Plan monitor in BAM Administrator to run the plan automatically.
Hope this helps
Thanks
Similar Messages
-
Could not read administrative data for payroll result
Hi Experts,
I am trying to extract data from ECC6.0 for datasource 0HR_PP_REC_51 and getting error:
"Personnel No. 00100062 : Could not read administrative data for payroll result HR_BIW_PP"
Can any body tell me the relevant solution for that.
Thanks in advance!
SapnaHi Sapna,
Please can you tell me how to fix this error, I have the same problem now.
Thanks in advance. -
Could not read boot block (input/output errror) powerbook g4
Hello
My friend gave me a powerbook g4 and a copy of osx lion, I would like to install it but the internal hardive is not available within the "select Destination" area of the installation process. I tried to repair the disk which is labelled Disk0s1, but shortly after it is underway i recieve this message.
**/dev/disk0s1 could not read boot block (input/output error) Error: The underlying task reported failure on exit. 1 non HFS volume checked, 1 volume could not be repaired because of an error.
Within disk utilities the Disk01s is grey, I can try to repair it but the above error occurs. Do you know what the problem is and how I can fix it?Since you are going to install system fresh, it sounds like, you should erase the drive. Boot from the installer disc, then select the language but do not start the installer. From the menu bar, you should have either an Applications or an Installer menu. From one of the menus, you can then start Disk Utility.
From the drives and volumes pane, select the internal drive hardware listing.
This will now allow you to partition or erase the disc. Now click the Erase tab and select Mac OS Extended (Journaled) as the format and then click the "Erase" button. You can name the volume that will actually be created, like for instance "MacintoshHD" or whatever you want.)
Once the erase has completed, you need to check the information for the hard drive at the bottom of the window. Be sure that the partition scheme is Apple Partition Map. If for some reason it is something else, like GUID, you won't be able to install MacOS on it. You will need to click the Partition tab, click the "Options..." button and select Apple Partition Map, then click the "Partition" button.
Once this is done, then you can quit Disk Utility and you should be able to install Tiger on that HD. -
Ad Hoc Query - While executing - System could not read any data
Hello Techies,
When I am excuting my Ad hoc query - for one personnel number for which Infotype 28 subtype 0001 has been maintained
But system is throwing this error -
System could not read any data
Message no. AQ_AD_HOC226
Diagnosis
There is no data available for the specified selections.
System response
The results list in the lower part of the screen still displays the last list to be created.
Please let me know why does it happening ?
Thanks
JaydeepIt was an date selection issue - as while executing the Ad hoc query - the reporting date is today -
changed to all -
Cisco ISE with AD Problem: "Could not read groups data: Global catalog not found"
Hi all,
When I make the ActiveDirectory integration with Cisco ISE, I have complete with this integration. but when I try to read the Groups from Active Directory, ISE shows the message "Could not read groups data: Global catalog not found".
My Domain has multiple sites and subnets, each contains GC for local logon. I have set ISE to the correct site and subnet. Forward and Reverse DNS are working with no error.
Does anyone get this problem, please help.
I have check into the ISE CLI Reference Guide 1.1.x
You are about to configure Active Directory settings.
Are you sure you want to proceed? y/n [n]: y
Parameter Name: dns.servers
Parameter Value: 10.77.122.135
Active Directory internal setting modification should only be performed if approved by ISE
support. Please confirm this change has been approved y/n [n]: y
What shoud I set in the Parameter Name ? dns.servers or my dns hostname ?
Please suggest for this too.
Thanks and Regards,
Pongsatorn M.Hi Pongsatorn,
Thanks for the reply!
I've attached the results of the ISE detailed AD test. As you can see, there is a fair number of domain controllers in the AD forest.
It seems everything works correctly until it gets to testing the AD connectivity on port 3268. Then I get this:
Testing Active Directory connectivity:
Global Catalog: pdascdc02.xyz.com
gc: 3268/tcp - refused
Testing Active Directory connectivity:
Global Catalog: pdascdc02.xyz.com
gc: 3268/tcp - refused
For some reason, the request to the controllers on port 3268 is being refused.
Any thoughts you might have are greatly appreciated.
Cheers,
Greg -
I am trying to open pdf in Pro and not Reader. Please advise how I can fix this.
I am trying to open pdf in Pro and not Reader. Please advise how I can fix this.
Eric-
FYI, this is a forum for storage and sharing...photoshop.com and revel. If you have acrobat issues you might want to make a note of the other forums:
http://forums.adobe.com shows a list of all of them, and specifically http://forums.adobe.com/community/acrobat this one for Acrobat
But, since I have had this same issue myself...
On Windows, locate your pdf document. Right click it and select "open with". Select Adobe Acrobat. That should do it. On MAC, I'm not sure but I'm guessing there is a similar setting.
Good luck.
Pattie -
I have an J2EE application along. This application works fine in IDE(JDeveloper9i), but when I want to deploy the EARfile in Jdeveloper10g,it gives me nested Exception in the code according to the following message in the console:
Wrote WAR file to C:\jdev1012\Workspaces\Workspace_STInstall\Pr_Dev_Aug05\deploy\webapp1.war
Wrote EAR file to C:\jdev1012\Workspaces\Workspace_STInstall\Pr_Dev_Aug05\deploy\application1.ear
Invoking OC4J admin tool...
C:\jdev\jdk\jre\bin\javaw.exe -jar C:\jdev1012\j2ee\home\admin.jar ormi://strele01.idc.oracle.com:23791 admin **** -deploy -file C:\jdev1012\Workspaces\Workspace_STInstall\Pr_Dev_Aug05\deploy\application1.ear -deploymentName stinstall-ear
Error: Deploy error: deploy failed!: ; nested exception is:
com.evermind.client.orion.AdminCommandException: Deploy error: deploy failed!: ; nested exception is:
oracle.oc4j.admin.internal.DeployerException: Could not read jazn-data config file: file:/C:/jdev1012/j2ee/home/application-deployments/stinstall-ear/jazn-data.xml for stinstall-ear (C:\jdev1012\j2ee\home\application-deployments\stinstall-ear\jazn-data.xml (The system cannot find the file specified))
at com.evermind.client.orion.DeployCommand.execute(DeployCommand.java:98)
at com.evermind.client.orion.Oc4jAdminConsole.executeCommand(Oc4jAdminConsole.java:121)
at com.evermind.client.orion.Oc4jAdminConsole.main(Oc4jAdminConsole.java:30)
java.rmi.RemoteException: deploy failed!: ; nested exception is:
oracle.oc4j.admin.internal.DeployerException: Could not read jazn-data config file: file:/C:/jdev1012/j2ee/home/application-deployments/stinstall-ear/jazn-data.xml for stinstall-ear (C:\jdev1012\j2ee\home\application-deployments\stinstall-ear\jazn-data.xml (The system cannot find the file specified))
oracle.oc4j.admin.internal.DeployerException: Could not read jazn-data config file: file:/C:/jdev1012/j2ee/home/application-deployments/stinstall-ear/jazn-data.xml for stinstall-ear (C:\jdev1012\j2ee\home\application-deployments\stinstall-ear\jazn-data.xml (The system cannot find the file specified))
at com.evermind.server.rmi.RMIConnection.EXCEPTION_ORIGINATES_FROM_THE_REMOTE_SERVER(RMIConnection.java:1602)
at com.evermind.server.rmi.RMIConnection.invokeMethod(RMIConnection.java:1553)
at com.evermind.server.rmi.RemoteInvocationHandler.invoke(RemoteInvocationHandler.java:55)
at com.evermind.server.rmi.RecoverableRemoteInvocationHandler.invoke(RecoverableRemoteInvocationHandler.java:22)
at __Proxy0.deploy(Unknown Source)
at com.evermind.client.orion.DeployCommand.execute(DeployCommand.java:95)
at com.evermind.client.orion.Oc4jAdminConsole.executeCommand(Oc4jAdminConsole.java:121)
at com.evermind.client.orion.Oc4jAdminConsole.main(Oc4jAdminConsole.java:30)
Caused by: oracle.oc4j.admin.internal.DeployerException: Could not read jazn-data config file: file:/C:/jdev1012/j2ee/home/application-deployments/stinstall-ear/jazn-data.xml for stinstall-ear (C:\jdev1012\j2ee\home\application-deployments\stinstall-ear\jazn-data.xml (The system cannot find the file specified))
at oracle.oc4j.admin.internal.DeployerBase.execute(DeployerBase.java:91)
at com.evermind.server.administration.DefaultApplicationServerAdministrator.internalDeploy(DefaultApplicationServerAdministrator.java:378)
at com.evermind.server.administration.DefaultApplicationServerAdministrator.deploy(DefaultApplicationServerAdministrator.java:278)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.evermind.server.rmi.RMICallHandler.run(RMICallHandler.java:124)
at com.evermind.server.rmi.RMICallHandler.run(RMICallHandler.java:48)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:534)
---- Embedded exception
oracle.oc4j.admin.internal.DeployerException: Could not read jazn-data config file: file:/C:/jdev1012/j2ee/home/application-deployments/stinstall-ear/jazn-data.xml for stinstall-ear (C:\jdev1012\j2ee\home\application-deployments\stinstall-ear\jazn-data.xml (The system cannot find the file specified))
at oracle.oc4j.admin.internal.DeployerBase.execute(DeployerBase.java:91)
at com.evermind.server.administration.DefaultApplicationServerAdministrator.internalDeploy(DefaultApplicationServerAdministrator.java:378)
at com.evermind.server.administration.DefaultApplicationServerAdministrator.deploy(DefaultApplicationServerAdministrator.java:278)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.evermind.server.rmi.RMICallHandler.run(RMICallHandler.java:124)
at com.evermind.server.rmi.RMICallHandler.run(RMICallHandler.java:48)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:534)
---- Embedded exception
java.lang.InstantiationException: Could not read jazn-data config file: file:/C:/jdev1012/j2ee/home/application-deployments/stinstall-ear/jazn-data.xml for stinstall-ear (C:\jdev1012\j2ee\home\application-deployments\stinstall-ear\jazn-data.xml (The system cannot find the file specified))
at com.evermind.server.XMLServerConfig.storeConfig(XMLServerConfig.java:1249)
at com.evermind.server.XMLServerConfig.storeJAZNConfig(XMLServerConfig.java:1197)
at com.evermind.server.XMLServerConfig.mkUserManager(XMLServerConfig.java:174)
at com.evermind.server.XMLServerConfig.initUserManager(XMLServerConfig.java:333)
at com.evermind.server.XMLServerConfig.initUserManagers(XMLServerConfig.java:240)
at com.evermind.server.XMLServerConfig.postInit(XMLServerConfig.java:643)
at com.evermind.server.deployment.EnterpriseArchive.postInit(EnterpriseArchive.java:1035)
at com.evermind.xml.XMLConfig.init(XMLConfig.java:181)
at com.evermind.server.ServerComponent.initDeployment(ServerComponent.java:317)
at com.evermind.server.ServerComponent.copyAndDeploy(ServerComponent.java:386)
at com.evermind.server.ServerComponent.initDeployment(ServerComponent.java:288)
at oracle.oc4j.admin.internal.ApplicationDeployer.initArchive(ApplicationDeployer.java:283)
at oracle.oc4j.admin.internal.ApplicationDeployer.doDeploy(ApplicationDeployer.java:120)
at oracle.oc4j.admin.internal.DeployerBase.execute(DeployerBase.java:73)
at com.evermind.server.administration.DefaultApplicationServerAdministrator.internalDeploy(DefaultApplicationServerAdministrator.java:378)
at com.evermind.server.administration.DefaultApplicationServerAdministrator.deploy(DefaultApplicationServerAdministrator.java:278)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.evermind.server.rmi.RMICallHandler.run(RMICallHandler.java:124)
at com.evermind.server.rmi.RMICallHandler.run(RMICallHandler.java:48)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:534)
---- Embedded exception
java.lang.InstantiationException: Could not read jazn-data config file: file:/C:/jdev1012/j2ee/home/application-deployments/stinstall-ear/jazn-data.xml for stinstall-ear (C:\jdev1012\j2ee\home\application-deployments\stinstall-ear\jazn-data.xml (The system cannot find the file specified))
at com.evermind.server.XMLServerConfig.storeConfig(XMLServerConfig.java:1249)
at com.evermind.server.XMLServerConfig.storeJAZNConfig(XMLServerConfig.java:1197)
at com.evermind.server.XMLServerConfig.mkUserManager(XMLServerConfig.java:174)
at com.evermind.server.XMLServerConfig.initUserManager(XMLServerConfig.java:333)
at com.evermind.server.XMLServerConfig.initUserManagers(XMLServerConfig.java:240)
at com.evermind.server.XMLServerConfig.postInit(XMLServerConfig.java:643)
at com.evermind.server.deployment.EnterpriseArchive.postInit(EnterpriseArchive.java:1035)
at com.evermind.xml.XMLConfig.init(XMLConfig.java:181)
at com.evermind.server.ServerComponent.initDeployment(ServerComponent.java:317)
at com.evermind.server.ServerComponent.copyAndDeploy(ServerComponent.java:386)
at com.evermind.server.ServerComponent.initDeployment(ServerComponent.java:288)
at oracle.oc4j.admin.internal.ApplicationDeployer.initArchive(ApplicationDeployer.java:283)
at oracle.oc4j.admin.internal.ApplicationDeployer.doDeploy(ApplicationDeployer.java:120)
at oracle.oc4j.admin.internal.DeployerBase.execute(DeployerBase.java:73)
at com.evermind.server.administration.DefaultApplicationServerAdministrator.internalDeploy(DefaultApplicationServerAdministrator.java:378)
at com.evermind.server.administration.DefaultApplicationServerAdministrator.deploy(DefaultApplicationServerAdministrator.java:278)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.evermind.server.rmi.RMICallHandler.run(RMICallHandler.java:124)
at com.evermind.server.rmi.RMICallHandler.run(RMICallHandler.java:48)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:534)
Exit status of OC4J admin tool (-deploy): 1
Elapsed time for deployment: 8 seconds
#### Deployment incomplete. #### Aug 17, 2005 5:19:14 PM
Does any one knows the cause of this exception??????????Plz. help
Message was edited by:
user446879Thanks....
Contents of the orion-application.xml are below:
++++++++++++++++++++++++++++++++++++++++++++++++++++++
<?xml version="1.0"?>
<!DOCTYPE orion-application PUBLIC "-//Evermind//DTD J2EE Application runtime 1.2//EN" "http://xmlns.oracle.com/ias/dtds/orion-application.dtd">
<orion-application>
<data-sources path="./data-sources.xml"/>
<!-- mapping for realm "jazn.com" -->
<security-role-mapping name="stonly">
<group name="stonlys" />
</security-role-mapping>
<security-role-mapping name="stinternal">
<group name="stusers" />
</security-role-mapping>
<security-role-mapping name="stadmin">
<group name="stadmins" />
</security-role-mapping>
<security-role-mapping name="stinstallconfig">
<group name="stinstallconfigs" />
</security-role-mapping>
<security-role-mapping name="stcalendar">
<group name="stcalendars" />
</security-role-mapping>
<security-role-mapping name="stemail">
<group name="stemails" />
</security-role-mapping>
<security-role-mapping name="stem">
<group name="stems" />
</security-role-mapping>
<security-role-mapping name="stfile">
<group name="stfiles" />
</security-role-mapping>
<security-role-mapping name="stintegclient">
<group name="stintegclients" />
</security-role-mapping>
<security-role-mapping name="strtc">
<group name="strtcs" />
</security-role-mapping>
<security-role-mapping name="stusearch">
<group name="stusearchs" />
</security-role-mapping>
<security-role-mapping name="stcportlet">
<group name="stcportlets" />
</security-role-mapping>
<security-role-mapping name="stwireless">
<group name="stwires" />
</security-role-mapping>
<security-role-mapping name="stvmfax">
<group name="stvmfaxs" />
</security-role-mapping>
<!-- use JAZN-XML by default -->
<jazn provider="XML" location="./jazn-data.xml" />
</orion-application>
++++++++++++++++++++++++++++++++++++++++++++++++++++++
Plz. clarify about the listing of the EAR file you wants to have a look?? -
Could not read jazn-data config file
I am using JDev 10.1.2
When deploying my app I am receiving
"oracle.oc4j.admin.internal.DeployerException: Cound not read jazn-data config file..." when deploying my app of OC4J 10.1.2.
When I deploy directly to an EAR file and open the EAR file I see:
application.xml
data-source.xml
blah.war
orion-application.xml
I belive what I should see in my EAR file is:
META-INF
blah.war
And drilling down into META-INF I should see:
application.xml
data-source.xml
jazn-data.xml
orion-application.xml
It seems that there is something that is configured incorrectly in my blah.deploy file but I can't find it. I have compared line for line with another app that creates the EAR as expected and I can successfully deploy from that application.
Please help.Hi,
the orion-application.xml file should have a content similar to this
<?xml version = '1.0' encoding = 'windows-1252'?>
<!DOCTYPE orion-application PUBLIC "-//Evermind//DTD J2EE Application runtime 1.2//EN" "http://xmlns.oracle.com/ias/dtds/orion-application.dtd">
<orion-application>
<data-sources path="./data-sources.xml"/>
<jazn provider="XML" location="jazn-data.xml"
default-realm="jazn.com"/>
</orion-application>
Otherwise the jazn-data.xml file cannot be found.
Frank -
Lightroom not reading correct data for Lens and Camera Serial Number
Hi you all.
Recently got Lightroom, and I'm so impressed - I never imagined image organizing and adjustment could be this easy and at the same time very advanced.
I have a problem, however. Lightroom (and Adobe Bridge, too) does not correctly read the EXIF data of Lens type and Camera Serial Number.
The first ~50 images I took and imported turned out correctly and displayed my serial number and lens (18-55 mm Canon) inside Lightroom.
But now, whenever I import photos into Lightroom or view them with Bridge, they all display "Unknown Lens" and "Unknown Camera Serial Number".
At first I thought that maybe the camera didn't correctly record this data on to the photos anymore for some reason, but a comparison using EXIFToolGUI shows that the metadata is EXACTLY the same as in the photos that display this info in Lightroom correctly.
I have not done any changes to either my camera (Canon EOS-350D / Digitial Rebel XT) or lens (the kit lens, 18-55 mm Canon).
It seems that for some reason, Lightroom has stopped reading these two fields of metadata - all the other fields, such as aperture and shutter speed, all display correctly.
I also tried to reimport the photos into Lightroom, but it didn't help. Neither did "Synchronize Folder" -> "Scan for metadata updates".
What should I do? I'd like my lens information do display correctly, as I'll buy a new lens soon.
I have attached one of the photos that Lightroom doesn't read the data correctly from. Try importing it into your Lightroom, and see if how the info displays.
Thanks in advance.Are these jpgs or RAW? I have only edited metadata on jpgs.
It looks like Vista's import stripped out all the makernotes. I didn't look at your file but that seems to be what happened. Be warned, Photoshop CS2 also strips out makernotes!
Now how to fix the problem. If you want to edit the metadata on files already loaded into LR, you need to write out your metadata to the files first, then edit the metadata, then read the new metadata into LR. This is scarey for me, so I always make sure my backup is up to date on the images first.
What to do... You probably can't put back all of the makernotes, so what to do to get the lens information in. I don't know if putting back in the makernote LensType would trigger LR to reconsider its lens information. I don't know. If it had a real lens name, my guess would be no because it would have an XMP::Lens field which would override. But maybe unknown lens doesn't have this field and it would re-read the makernotes.
The other solution is to forget about makernotes for these images and put the exact text you want into XMP::Lens. I think that's the "easy" way.
In either case, you will have to become familiar with exiftoolGUI or exiftool itself. I use the command line exiftool but it looks like you can edit multiple files with exiftoolGUI. Select your files, click the edit thingy (^) under XMP, choose various, and there is lens. Put in the text you want.
I would do this with one file first. If the lens shows up after you read the new metadata into LR, you know you have it right.
Note, exiftool can write backup files for each file. This makes too much of a mess for me. I prefer to copy the directory first (I have copies anyway, I just have to make sure the backups are up to date).
Good luck! I'm struggling with a similar situation where the same lens used by two different cameras is coming out with a different name. I need to go back and "fix" the names in the images already imported, and then develop my procedure for setting a single unique name before I load new images into LR. Not too much of a problem because I'm loading in GPS information anyway... What's another call to exiftool...
Judy -
File Adapter fixed length Native format Builder schema not reading the data as expected
Hi
We are using a File Adapter for reading a fixed length data. Using the schema we are able to read the file but the places are incorrect. Following is the schema that we used and the payload.
At the last you can find our expected read of data how it should be.
With out the record type code we are not even reading the file. Hope there should be a correction in the schema. Please suggest
Schema that we are using:
<?xml version= '1.0' encoding= 'UTF-8' ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
xmlns:tns="http://xmlns.energy.com/CreateReturnedItemGENVNDRPReqABCSImplFileAdapterReadReturnedItem"
targetNamespace="http://xmlns.energy.com/CreateReturnedItemGENVNDRPReqABCSImplFileAdapterReadReturnedItem"
elementFormDefault="qualified" attributeFormDefault="unqualified" nxsd:version="NXSD" nxsd:stream="chars"
nxsd:encoding="US-ASCII">
<xsd:element name="GENVNDRReturnedItem">
<xsd:complexType>
<xsd:sequence minOccurs="1" maxOccurs="unbounded" nxsd:choiceCondition="fixedLength" nxsd:length="1">
<xsd:element name="HeaderRec" nxsd:style="terminated" nxsd:terminatedBy="${eol}" nxsd:startsWith="1">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="RecordTypeCode" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="1" nxsd:padStyle="tail"/>
<xsd:element name="PriorityCode" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="2" nxsd:padStyle="tail"/>
<xsd:element name="ImmediateDstn" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="10" nxsd:padStyle="tail"/>
<xsd:element name="ImmediateOrgin" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="10" nxsd:padStyle="tail"/>
<xsd:element name="FileCrDt" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="6" nxsd:padStyle="tail"/>
<xsd:element name="FileCrTm" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="4" nxsd:padStyle="tail"/>
<xsd:element name="FileIdMdfr" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="1" nxsd:padStyle="tail"/>
<xsd:element name="RecSize" type="xsd:string" nxsd:style="fixedLength" nxsd:length="3"
nxsd:padStyle="tail"/>
<xsd:element name="BlockingFctr" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="2" nxsd:padStyle="tail"/>
<xsd:element name="FormatCd" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="1" nxsd:padStyle="tail"/>
<xsd:element name="ImmediateDstnNm" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="23" nxsd:padStyle="tail"/>
<xsd:element name="ImmediateOrginNm" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="23" nxsd:padStyle="tail"/>
<xsd:element name="RefCd" type="xsd:string" nxsd:style="fixedLength" nxsd:length="8"
nxsd:padStyle="tail"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="BatchHdrRec" nxsd:style="terminated" nxsd:terminatedBy="${eol}" nxsd:startsWith="5">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="RecordTypeCode" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="1" nxsd:padStyle="tail"/>
<xsd:element name="ServClsCode" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="3" nxsd:padStyle="tail"/>
<xsd:element name="CmpnyName" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="16" nxsd:padStyle="tail"/>
<xsd:element name="CmpnyDiscretionaryData" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="20" nxsd:padStyle="tail"/>
<xsd:element name="CmpnyIdfn" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="10" nxsd:padStyle="tail"/>
<xsd:element name="StdClsCode" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="3" nxsd:padStyle="tail"/>
<xsd:element name="CmpnyEntryDesc" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="10" nxsd:padStyle="tail"/>
<xsd:element name="CmpnyDescDate" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="6" nxsd:padStyle="tail"/>
<xsd:element name="EffEntryDate" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="6" nxsd:padStyle="tail"/>
<xsd:element name="SettlementDate" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="3" nxsd:padStyle="tail"/>
<xsd:element name="OrgntrStatusCode" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="1" nxsd:padStyle="tail"/>
<xsd:element name="OrgntrBatchCode" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="15" nxsd:padStyle="tail"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="FileControlRec" nxsd:style="terminated" nxsd:terminatedBy="${eol}"
nxsd:startsWith="9">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="RecordTypeCode" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="1" nxsd:padStyle="tail"/>
<xsd:element name="BatchCnt" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="6" nxsd:padStyle="tail"/>
<xsd:element name="BlockCnt" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="6" nxsd:padStyle="tail"/>
<xsd:element name="EntryAddendaCnt" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="8" nxsd:padStyle="tail"/>
<xsd:element name="EntryHash" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="10" nxsd:padStyle="tail"/>
<xsd:element name="TtlDbtEntryDlrAmt" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="12" nxsd:padStyle="tail"/>
<xsd:element name="TtlCrdtEntryDlrAmt" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="12" nxsd:padStyle="tail"/>
<xsd:element name="Reserved" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="39" nxsd:padStyle="tail"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
Sample data:
1011390714890 0910000191406110449A094101MCSCLDA_TESTIN
XPLLS KNRGO CNNK
5200MCSCLDA_TESTIN e-Bill
2390714890TELe-Bill
1406100001091000017000001
6262759774891010000074743
0000033793102651-013 U HOLBACH KARLA & JAMES 1091000013925011
799R01091000013925011
27597748
091000010000001
820000000200275977480000000337930000000000002390714890
091000010000001
9000060000025000001200995048661000001265867000000000000
Read File receive Activity:
<GENVNDRReturnedItem>
<HeaderRec>
<RecordTypeCode>0</RecordTypeCode>
<PriorityCode>11</PriorityCode>
<ImmediateDstn>390714890</ImmediateDstn>
<ImmediateOrgin>0910000191</ImmediateOrgin>
<FileCrDt>406110</FileCrDt>
<FileCrTm>449A</FileCrTm>
<FileIdMdfr>0</FileIdMdfr>
<RecSize>941</RecSize>
<BlockingFctr>01</BlockingFctr>
<FormatCd>M</FormatCd>
<ImmediateDstnNm>CSCLDA_TESTIN X</ImmediateDstnNm>
<ImmediateOrginNm>PLLS KNRGO CNNK</ImmediateOrginNm>
<RefCd></RefCd>
</HeaderRec>
<BatchHdrRec>
<RecordTypeCode>2</RecordTypeCode>
<ServClsCode>00M</ServClsCode>
<CmpnyName>CSCLDA_TESTIN e</CmpnyName>
<CmpnyDiscretionaryData>-Bill 2</CmpnyDiscretionaryData>
<CmpnyIdfn>390714890T</CmpnyIdfn>
<StdClsCode>ELe</StdClsCode>
<CmpnyEntryDesc>-Bill</CmpnyEntryDesc>
<CmpnyDescDate>1</CmpnyDescDate>
<EffEntryDate>406100</EffEntryDate>
<SettlementDate>001</SettlementDate>
<OrgntrStatusCode>0</OrgntrStatusCode>
<OrgntrBatchCode>91000017000001</OrgntrBatchCode>
</BatchHdrRec>
<FileControlRec>
<RecordTypeCode>0</RecordTypeCode>
<BatchCnt>000600</BatchCnt>
<BlockCnt>000250</BlockCnt>
<EntryAddendaCnt>00001200</EntryAddendaCnt>
<EntryHash>9950486610</EntryHash>
<TtlDbtEntryDlrAmt>000012658670</TtlDbtEntryDlrAmt>
<TtlCrdtEntryDlrAmt>00000000000</TtlCrdtEntryDlrAmt>
<Reserved></Reserved>
</FileControlRec>
</GENVNDRReturnedItem>
Expected Read data how we are looking:
<GENVNDRReturnedItem>
<HeaderRec>
<RecordTypeCode>0</RecordTypeCode>
<PriorityCode>11</PriorityCode>
<ImmediateDstn>39071489</ImmediateDstn>
<ImmediateOrgin>0091000019</ImmediateOrgin>
<FileCrDt>140611</FileCrDt>
<FileCrTm>0449</FileCrTm>
<FileIdMdfr>A</FileIdMdfr>
<RecSize>094</RecSize>
<BlockingFctr>10</BlockingFctr>
<FormatCd>1</FormatCd>
<ImmediateDstnNm>MCSCLDA_TESTIN</ImmediateDstnNm>
<ImmediateOrginNm>XPLLS KNRGO CNNK</ImmediateOrginNm>
<RefCd/>
</HeaderRec>
<BatchHdrRec>
<RecordTypeCode>2</RecordTypeCode>
<ServClsCode>200</ServClsCode>
<CmpnyName>MCSCLDA_TESTIN</CmpnyName>
<CmpnyDiscretionaryData>e-Bill</CmpnyDiscretionaryData>
<CmpnyIdfn>2390714890</CmpnyIdfn>
<StdClsCode>TEL</StdClsCode>
<CmpnyEntryDesc>e-Bill</CmpnyEntryDesc>
<CmpnyDescDate/>
<EffEntryDate>140610</EffEntryDate>
<SettlementDate>000</SettlementDate>
<OrgntrStatusCode>1</OrgntrStatusCode>
<OrgntrBatchCode>091000017000001</OrgntrBatchCode>
</BatchHdrRec>
<FileControlRec>
<RecordTypeCode>0</RecordTypeCode>
<BatchCnt>000060</BatchCnt>
<BlockCnt>000025</BlockCnt>
<EntryAddendaCnt>00000120</EntryAddendaCnt>
<EntryHash>0995048661</EntryHash>
<TtlDbtEntryDlrAmt>000001265867</TtlDbtEntryDlrAmt>
<TtlCrdtEntryDlrAmt>000000000000</TtlCrdtEntryDlrAmt>
<Reserved/>
</FileControlRec>
</GENVNDRReturnedItem>at step 8 of 9 of the file adapter wizard, the icon appears as a cog, on the right, with caption "define schema for native format".
I have JDev 11..1.1.3.0
The problem might be with the version of the SOA extensions you have installed.... -
PCI6534 not reading the data correctly
Hi,
I am using PCI6534 to read the digital data from out of ADC. I am using port 2 as the input port and PFI3 as the external trigger ( given to the clock of the ADC). I am not able read the data properly ( missing the first few bits of data).Hi,
I am using PCI6534 to read the digital data from out of ADC. I am using port 2 as the input port and PFI3 as the external trigger ( given to the clock of the ADC). I am not able read the data properly ( missing the first few bits of data). -
COI not reading equity data after consolidation group change
Dear experts,
I am running the consolidation of investments task for a new group that has been created on 012.2009. This new group CG2 is a child of an existing one CG1, and all the consolidation units that I have in 012.2009 under CG2 were in 012.2008 under the CG1.
In my new group GC2 all the units have as first consolidation period 012.2009 and on the parent group they have as last consolidation period 012.2009.
The problem is that when I run the COI task the system does not read the equity data for these consolidation units. I have both, equity data and Investment data defined to be read from additional financial data. The system reads correctly the investment data for the parent consolidation unit, and tries to eliminate it, but as it does not read the equity data of the child so it takes the value to consolidation a difference, that is incorrect.
Does anyone know what I am missing?
Thanks in advance.
Kind regards,
SóniaHi Sonia
i dont want to confuse you as Dan is guiding so far. let me put my thoughts some here.
CG1 12/2008
- CU - A Parent 12/2008 to 999/9999
- CU- B 12/2008 to 999/9999
- CU - C 12/2008 to 999/9999
do you have any another sub node for CU-B and CU-C? as B has investment in C
New Group: 12/2009
CG1
- CU -A 12/08 to 999/9999
- CU - B 12/08 to 12/9999
- CU - C 12/08 to 12/2009
CG2 group supose to be like this
CG1
-CU-A
-CU-B
I--- CG2
CU - B Parent 12/09 to 999/9999
CU - C 12/09 to 999/9999
- CU-C
Now with above scenario you can invest in C from B and system will treate as FIRST CONSOLIDATION based on AFD Investments/Equity
How did you maintain B investments in C at CG1 12/08 level?
and or as per Dan
You have to run PREP for CONSOLIDATION GROUP CHANGE task before CT task and after Elim Taks but before COI task
thx -
Hi Ashwinprabhu,
thank you very much for your answer.
i have one more query, I have orchestration published as wcf service in IIS and internally orchestration calling one more service , it means orchestration sending a request and getting response back from the service.
actually we are implementing the copy of that called service through biztalk orchestration for system automatic and tracking failed messages and n/w failures.
But tracking profiler not tracking the Data.
And we need to develop the http service as https(Over SSL), we implemented in iis using self
signed certificate, it is working just browser for wsdl(in browser), we are not able to test the service in wcf test client, it is giving wsdl error, in wsdl schema reference showing with HTTP only,
please help me how to resolve the issue.
TeegalaFirst things first, I think it's best to publish only schemas as WCF service for dependency management reasons. That said - WSDL availability is covered in the WCF adapter under the behaviors. If you're using HTTPBasic this may be hard to modify, but using
WCFCustom allows you to add the WSDL behavior and specify that it should be available via HTTPS.
As to the BAM, are you using TPE within the orchestration or at the port level? I'd imagine your TPE tracks the start and end events of your orchestration using the Orchestration Schedule. If you're fairly confident that the TPE is correct and
yet don't see BAM data 1) make sure your SQL Agent is running healthy and all jobs look OK and 2) check the TDDS tables in both the message box and the BAMPrimaryImport databases. These will show you if there has been some sort of sync issue. There's
even a TDDS errors tables - so check that out.
Kind Regards,
-Dan
If this answers your question, please Mark as Answer -
Hello all,
I have dowloaded songs from a Thai band, but my iPod does not read characters and I just have a blank stripe.
How can I fix this?
Thank you in advance.Thai is not one of the supported languages.
http://www.apple.com/ipodclassic/specs.html
Languages
Czech, Danish, Dutch, English, Finnish, French, German, Greek, Hungarian, Italian, Japanese, Korean, Norwegian, Polish, Portuguese, Russian, Simplified Chinese, Spanish, Swedish, Traditional Chinese, and Turkish
Additional language support for display of song, album, and artist information: Bulgarian, Croatian, Romanian, Serbian, Slovak, Slovenian, Ukrainian, and Vietnamese
B-rock -
My SWF is not reading a data file when off my machine
I have done a build out of Flash Builder 4.5.
My app reads an external XML in the local dir and displays a pie chart and then a bar chart for each of the selected pie wedges.
Works great for me.
But when I share the SWF and XML with co workers the SWF does not seem to read the XML for them.
Is there another file I need to provide them?
Or is there a build setting I have not set?Thank you.
I tried this and it seems to work.
But a total standalone app is not what I am looking for.
I am producing this for researchers that would then want to add these visualizations
to their presentations and reports.
So the product needs to be able to be embeded into Word docs, Power Point and the like.
My goal is to produce an SWF that reads an external XML file for data to
then visualize on charts.
I have found that if I embed the data in the original mxml file it seems to work fine.
I only am having trouble when I start trying to read external data.
I guess I will resort to hard wiring the data into the SWF but it seems to not be right.
Maybe you are looking for
-
PO vendor is not an invoicing party
Hi, Would like to seek for help for the following scenerio,unable to post transaction from MIRO to FICO during invoice verification level with the above subject. Later, we found out the capex purchase order have worngly selected an invalid vendor wh
-
Default series in purchase order
Hi All, I have defined two series in purchase order i.e IMPORT & domestic.My requirement is when i am making Purchase order through Order Recommendation Report system should automatically make the series for Purchse order by default as per the Vendor
-
Using GridBagLayout to fill the full width of a JFrame, ...
I have two quick questions regarding GridBagLayout. 1st, I would like the fill the full width of a JFrame with a JPanel. I have tried: JFrame frame = new JFrame(); //Set width and height of frame JPanel panel = createFilledPanel(); panelConstraints.g
-
My sleep button doesnt work so i tried to restore when i was restoring it was the apple with the loading circle it just stop and it dosent move from 1 day ago an i cant restore with sleep an home button cause it dont work!!!! When i connect it to itu
-
Will theis Hard drive fit in my macbook pro?
I think it is the right size but I want to be sure. http://www.amazon.co.uk/Western-Digital-Scorpio-Mobile-Internal/dp/B0034ZD5P0/re f=wlit_dpo?ie=UTF8&coliid=I1KM8BQJUSARMS&colid=3JEKXYVUZW51O