PCI6534 not reading the data correctly
Hi,
I am using PCI6534 to read the digital data from out of ADC. I am using port 2 as the input port and PFI3 as the external trigger ( given to the clock of the ADC). I am not able read the data properly ( missing the first few bits of data).
Hi,
I am using PCI6534 to read the digital data from out of ADC. I am using port 2 as the input port and PFI3 as the external trigger ( given to the clock of the ADC). I am not able read the data properly ( missing the first few bits of data).
Similar Messages
-
File Adapter fixed length Native format Builder schema not reading the data as expected
Hi
We are using a File Adapter for reading a fixed length data. Using the schema we are able to read the file but the places are incorrect. Following is the schema that we used and the payload.
At the last you can find our expected read of data how it should be.
With out the record type code we are not even reading the file. Hope there should be a correction in the schema. Please suggest
Schema that we are using:
<?xml version= '1.0' encoding= 'UTF-8' ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
xmlns:tns="http://xmlns.energy.com/CreateReturnedItemGENVNDRPReqABCSImplFileAdapterReadReturnedItem"
targetNamespace="http://xmlns.energy.com/CreateReturnedItemGENVNDRPReqABCSImplFileAdapterReadReturnedItem"
elementFormDefault="qualified" attributeFormDefault="unqualified" nxsd:version="NXSD" nxsd:stream="chars"
nxsd:encoding="US-ASCII">
<xsd:element name="GENVNDRReturnedItem">
<xsd:complexType>
<xsd:sequence minOccurs="1" maxOccurs="unbounded" nxsd:choiceCondition="fixedLength" nxsd:length="1">
<xsd:element name="HeaderRec" nxsd:style="terminated" nxsd:terminatedBy="${eol}" nxsd:startsWith="1">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="RecordTypeCode" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="1" nxsd:padStyle="tail"/>
<xsd:element name="PriorityCode" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="2" nxsd:padStyle="tail"/>
<xsd:element name="ImmediateDstn" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="10" nxsd:padStyle="tail"/>
<xsd:element name="ImmediateOrgin" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="10" nxsd:padStyle="tail"/>
<xsd:element name="FileCrDt" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="6" nxsd:padStyle="tail"/>
<xsd:element name="FileCrTm" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="4" nxsd:padStyle="tail"/>
<xsd:element name="FileIdMdfr" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="1" nxsd:padStyle="tail"/>
<xsd:element name="RecSize" type="xsd:string" nxsd:style="fixedLength" nxsd:length="3"
nxsd:padStyle="tail"/>
<xsd:element name="BlockingFctr" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="2" nxsd:padStyle="tail"/>
<xsd:element name="FormatCd" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="1" nxsd:padStyle="tail"/>
<xsd:element name="ImmediateDstnNm" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="23" nxsd:padStyle="tail"/>
<xsd:element name="ImmediateOrginNm" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="23" nxsd:padStyle="tail"/>
<xsd:element name="RefCd" type="xsd:string" nxsd:style="fixedLength" nxsd:length="8"
nxsd:padStyle="tail"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="BatchHdrRec" nxsd:style="terminated" nxsd:terminatedBy="${eol}" nxsd:startsWith="5">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="RecordTypeCode" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="1" nxsd:padStyle="tail"/>
<xsd:element name="ServClsCode" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="3" nxsd:padStyle="tail"/>
<xsd:element name="CmpnyName" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="16" nxsd:padStyle="tail"/>
<xsd:element name="CmpnyDiscretionaryData" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="20" nxsd:padStyle="tail"/>
<xsd:element name="CmpnyIdfn" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="10" nxsd:padStyle="tail"/>
<xsd:element name="StdClsCode" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="3" nxsd:padStyle="tail"/>
<xsd:element name="CmpnyEntryDesc" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="10" nxsd:padStyle="tail"/>
<xsd:element name="CmpnyDescDate" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="6" nxsd:padStyle="tail"/>
<xsd:element name="EffEntryDate" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="6" nxsd:padStyle="tail"/>
<xsd:element name="SettlementDate" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="3" nxsd:padStyle="tail"/>
<xsd:element name="OrgntrStatusCode" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="1" nxsd:padStyle="tail"/>
<xsd:element name="OrgntrBatchCode" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="15" nxsd:padStyle="tail"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="FileControlRec" nxsd:style="terminated" nxsd:terminatedBy="${eol}"
nxsd:startsWith="9">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="RecordTypeCode" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="1" nxsd:padStyle="tail"/>
<xsd:element name="BatchCnt" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="6" nxsd:padStyle="tail"/>
<xsd:element name="BlockCnt" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="6" nxsd:padStyle="tail"/>
<xsd:element name="EntryAddendaCnt" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="8" nxsd:padStyle="tail"/>
<xsd:element name="EntryHash" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="10" nxsd:padStyle="tail"/>
<xsd:element name="TtlDbtEntryDlrAmt" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="12" nxsd:padStyle="tail"/>
<xsd:element name="TtlCrdtEntryDlrAmt" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="12" nxsd:padStyle="tail"/>
<xsd:element name="Reserved" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="39" nxsd:padStyle="tail"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
Sample data:
1011390714890 0910000191406110449A094101MCSCLDA_TESTIN
XPLLS KNRGO CNNK
5200MCSCLDA_TESTIN e-Bill
2390714890TELe-Bill
1406100001091000017000001
6262759774891010000074743
0000033793102651-013 U HOLBACH KARLA & JAMES 1091000013925011
799R01091000013925011
27597748
091000010000001
820000000200275977480000000337930000000000002390714890
091000010000001
9000060000025000001200995048661000001265867000000000000
Read File receive Activity:
<GENVNDRReturnedItem>
<HeaderRec>
<RecordTypeCode>0</RecordTypeCode>
<PriorityCode>11</PriorityCode>
<ImmediateDstn>390714890</ImmediateDstn>
<ImmediateOrgin>0910000191</ImmediateOrgin>
<FileCrDt>406110</FileCrDt>
<FileCrTm>449A</FileCrTm>
<FileIdMdfr>0</FileIdMdfr>
<RecSize>941</RecSize>
<BlockingFctr>01</BlockingFctr>
<FormatCd>M</FormatCd>
<ImmediateDstnNm>CSCLDA_TESTIN X</ImmediateDstnNm>
<ImmediateOrginNm>PLLS KNRGO CNNK</ImmediateOrginNm>
<RefCd></RefCd>
</HeaderRec>
<BatchHdrRec>
<RecordTypeCode>2</RecordTypeCode>
<ServClsCode>00M</ServClsCode>
<CmpnyName>CSCLDA_TESTIN e</CmpnyName>
<CmpnyDiscretionaryData>-Bill 2</CmpnyDiscretionaryData>
<CmpnyIdfn>390714890T</CmpnyIdfn>
<StdClsCode>ELe</StdClsCode>
<CmpnyEntryDesc>-Bill</CmpnyEntryDesc>
<CmpnyDescDate>1</CmpnyDescDate>
<EffEntryDate>406100</EffEntryDate>
<SettlementDate>001</SettlementDate>
<OrgntrStatusCode>0</OrgntrStatusCode>
<OrgntrBatchCode>91000017000001</OrgntrBatchCode>
</BatchHdrRec>
<FileControlRec>
<RecordTypeCode>0</RecordTypeCode>
<BatchCnt>000600</BatchCnt>
<BlockCnt>000250</BlockCnt>
<EntryAddendaCnt>00001200</EntryAddendaCnt>
<EntryHash>9950486610</EntryHash>
<TtlDbtEntryDlrAmt>000012658670</TtlDbtEntryDlrAmt>
<TtlCrdtEntryDlrAmt>00000000000</TtlCrdtEntryDlrAmt>
<Reserved></Reserved>
</FileControlRec>
</GENVNDRReturnedItem>
Expected Read data how we are looking:
<GENVNDRReturnedItem>
<HeaderRec>
<RecordTypeCode>0</RecordTypeCode>
<PriorityCode>11</PriorityCode>
<ImmediateDstn>39071489</ImmediateDstn>
<ImmediateOrgin>0091000019</ImmediateOrgin>
<FileCrDt>140611</FileCrDt>
<FileCrTm>0449</FileCrTm>
<FileIdMdfr>A</FileIdMdfr>
<RecSize>094</RecSize>
<BlockingFctr>10</BlockingFctr>
<FormatCd>1</FormatCd>
<ImmediateDstnNm>MCSCLDA_TESTIN</ImmediateDstnNm>
<ImmediateOrginNm>XPLLS KNRGO CNNK</ImmediateOrginNm>
<RefCd/>
</HeaderRec>
<BatchHdrRec>
<RecordTypeCode>2</RecordTypeCode>
<ServClsCode>200</ServClsCode>
<CmpnyName>MCSCLDA_TESTIN</CmpnyName>
<CmpnyDiscretionaryData>e-Bill</CmpnyDiscretionaryData>
<CmpnyIdfn>2390714890</CmpnyIdfn>
<StdClsCode>TEL</StdClsCode>
<CmpnyEntryDesc>e-Bill</CmpnyEntryDesc>
<CmpnyDescDate/>
<EffEntryDate>140610</EffEntryDate>
<SettlementDate>000</SettlementDate>
<OrgntrStatusCode>1</OrgntrStatusCode>
<OrgntrBatchCode>091000017000001</OrgntrBatchCode>
</BatchHdrRec>
<FileControlRec>
<RecordTypeCode>0</RecordTypeCode>
<BatchCnt>000060</BatchCnt>
<BlockCnt>000025</BlockCnt>
<EntryAddendaCnt>00000120</EntryAddendaCnt>
<EntryHash>0995048661</EntryHash>
<TtlDbtEntryDlrAmt>000001265867</TtlDbtEntryDlrAmt>
<TtlCrdtEntryDlrAmt>000000000000</TtlCrdtEntryDlrAmt>
<Reserved/>
</FileControlRec>
</GENVNDRReturnedItem>at step 8 of 9 of the file adapter wizard, the icon appears as a cog, on the right, with caption "define schema for native format".
I have JDev 11..1.1.3.0
The problem might be with the version of the SOA extensions you have installed.... -
Profit Center is not reading the data...
hi all,
When I assigned each Cost center with a profit center and posted costs through in FB50 to cost centers and was trying to check the data in KE5Z, system displaying the message that 'No data Read'.....
Why it is soo..
Thank you..
SureshHi Karhik,
Thank you for that Trans Code... thers it is working...
but why not in KE5Z ?? I was specifying there doc no...
Anywys.. Thank you Karthik..
Byee.. Suresh
Message was edited by:
Suresh Kumar -
RFC not Reading the data's all time.......
Hi all,
I am sending the delivery information from sap to b2b , through rfc, When i do the test run for this RFC i took data's sometime and the next time it is not taking any data, Casn you explain me.Hi Karhik,
Thank you for that Trans Code... thers it is working...
but why not in KE5Z ?? I was specifying there doc no...
Anywys.. Thank you Karthik..
Byee.. Suresh
Message was edited by:
Suresh Kumar -
RFC -Not reading the data all time
Hi all,
I am sending the delivery information from sap to b2b , through rfc, When i do the test run for this RFC i took data's sometime and the next time it is not taking any data, Casn you explain me.Hi,
For this issue,I would like to know if we can access or see the file in the DVD.
Did you receive the error message?
I suggest you check the Device Manager to see if the device is marked with a yellow exclamation point.
Meanwhile,please use the CD/DVD troubleshooter tool ,which can automatically find and fix some problems with CD/DVD.
http://go.microsoft.com/?linkid=9840807
Hope this helps.
Regards,
Kelvin hsu
TechNet Community Support -
MacBook not reading the data on my harddrive now?
So I have a Lacie 80 gig harddrive that I have been able to read before but for some reason it won't now. It shows that there is data on there but it won't show the folders. It does read my WD Passport and it's contents. I have all of my 60 gigs of music on the Lacie and was about to convert all the WMA's and put them on the WD but now I might be out of luck. Does anybody have any ideas?
hi
format it with a pc in msdos mod
regards -
Strange scenario,Oracle can not display the data in mysql correctly
I use Heterogeneous Service+ODBC to achieve "oracle access mysql"(any other method?),and now i find Oracle can not display the data in mysql correctly:
-------mysql------------
mysql> create table tst(id int,name varchar(10));
Query OK, 0 rows affected (0.00 sec)
mysql> insert into tst values(1,'a');
Query OK, 1 row affected (0.00 sec)
mysql> select * from tst;
------------+
| id | name |
------------+
| 1 | a |
------------+
1 row in set (0.00 sec)
mysql> show create table tst\G
*************************** 1. row ***************************
Table: tst
Create Table: CREATE TABLE `tst` (
`id` int(11) DEFAULT NULL,
`name` varchar(10) DEFAULT NULL
) ENGINE=MyISAM DEFAULT CHARSET=utf8
1 row in set (0.00 sec)
-------------oracle ------------------
SQL> select count(*) from "tst"@mysql;
COUNT(*)
49
SQL> select * from "tst"@mysql;
id
1
SQL> desc "tst"@mysql;
Name Null? Type
id NUMBER(10)You can make the following query on the result page:
"select * from the_table where movietitle = ? and cinema = ?"
then you set movietitle and cinema to those which the user selected. If the resultset contains more than 0 rows, that means the movie is available.
Below is the sample code, it assumes you have a connection to the database:
PreparedStatement stat = myConnection.prepareStatement("select * from the_table where movietitle = ? and cinema = ?");
stat.setString(1, usersMovieTitleSelection);
stat.setString(2, usersCinemaSelection);
ResultSet res = stat.executeQuery();
if (res.next()) {
out.print("The movie is available");
} else {
out.print("The movie is not available");
}Now just add that to your JSP page. Enjoy ! =) -
I can not count the data from the module. Can prompt as it to make. It is desirable with examples (data read-out from the module and data transmission between channels. It is in advance grateful.
Hello. Most of the engineers in developer exchange are more familiar
with NI products. Contacting ICS for technical support is a better
course of action. -
I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?
Attachments:
try2.txt 2 KB
read_array.vi 21 KBThe problem is in the delimiters in your text file. By default, Read From Spreadsheet File.vi expects a tab delimited file. You can specify a delimiter (like a space), but Read From Spreadsheet File.vi has a problem with repeated delimiters: if you specify a single space as a delimiter and Read From Spreadsheet File.vi finds two spaces back-to-back, it stops reading that line. Your file (as I got it from your earlier post) is delimited by 4 spaces.
Here are some of your choices to fix your problem.
1. Change the source file to a tab delimited file. Your VI will then run as is.
2. Change the source file to be delimited by a single space (rather than 4), then wire a string constant containing one space to the delimiter input of Read From Spreadsheet File.vi.
3. Wire a string constant containing 4 spaces to the delimiter input of Read From Spreadsheet File.vi. Then your text file will run as is.
Depending on where your text file comes from (see more comments below), I'd vote for choice 1: a tab delimited text file. It's the most common text output of spreadsheet programs.
Comments for choices 1 and 2: Where does the text file come from? Is it automatically generated or manually generated? Will it be generated multiple times or just once? If it's manually generated or generated just once, you can use any text editor to change 4 spaces to a tab or to a single space. Note: if you want to change it to a tab delimited file, you can't enter a tab directly into a box in the search & replace dialog of many programs like notepad, but you can do a cut and paste. Before you start your search and replace (just in the text window of the editor), press tab. A tab character will be entered. Press Shift-LeftArrow (not Backspace) to highlight the tab character. Press Ctrl-X to cut the tab character. Start your search and replace (Ctrl-H in notepad in Windows 2000). Click into the Find What box. Enter four spaces. Click into the Replace With box. Press Ctrl-V to paste the tab character. And another thing: older versions of notepad don't have search and replace. Use any editor or word processor that does. -
I have received a PDF which prints fine in Windows 7 but with Windows XP I get "Acrobat Reader An error exists on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem." and a blank piece of paper passes through the printer. I appreciate that Windows XP is no longer supported but I would like to think that the solution to this problem is not too difficult!
I have tried Acrobat 9, 10 and 11.
Any advice (apart from use Windows 7! ) would be most welcome.
Many thanks.If you use the same Adobe Reader versions with the same PDF on Windows 7 and XP, then I would expect the outcome to be the same.
Is this a local or online PDF?
If local, is the file really exactly the same?
If online, in what browser? -
my up to date iMac can not read the lightroom 5 installation dvd I received for christmas, the dvd player works fine with other dvd's, is there a way to download the program with the dvd's serial number?
No need to worry about the disk version. You would just have to install an update anyway as soon as it was installed. Download from the link provided below and use the serial number you have to activate.
Product updates -
"An error exist on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem."
Any ideas how to get rid of this? Realistically its not practical to contact them, nor the other 1,000,000 web site owners whom host pdf's.
I really would like to disable the pop up only.
Seem to get it on quite a few PDF's. This web page seems to have quite a few that produce the problem.
http://www.2010.cannell.co.uk/manuals/manuals_porsche.html
click on the link to the pdf, scroll down a few pages and it pops up.
I do not get the error when using reader 10, only the new 11.0.0.1 version.Hi Pat,
No problem withthe link you supplied.
This is one that has the problem "948 Cayenne Owners Manual - 2008 - Turbo" http://www.2010.cannell.co.uk/manuals/manuals_porsche.html
Just FYI, I look after 8000 clients, have the same problem on 3 of my test machines.
All windows 7, 64 bit IE9 fully patched.
Using 32 bit IE
Testing prior to upgrade from 10 to 11 -
Iam not getting the data on screen after using the user exit zxpadu01
Dear Freinds
As per my requirement when the user enters value Ansal it should get defaulted to Amount field (bet01 ) based on the wage type
i have written calculation ( q0008-bet01 = ansal/100) before it getting defaulted to bet01, i found that value is not getting default on the screen for bet01 once i enter value for Ansal , please any body correct my code
in ZXPADU02 i have written the code as below :
data : wa_p0008 like p0008,
i0008 like p0008,
l_v_ANSAL type ANSAL_15,
l_v_amount type PAD_AMT7S.
CASE innnn-infty.
when '0008'.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008. -- HERE I GOT ALL THE DATA EXCEPT BET01
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008 --- HERE I CAN SEE EVEN THE BET01 IS FILLED
IMPORTING
prelp = innnn. --- HERE I CAN SEE LGART BUT NOT AMOUNT VALUE
endif.
when others.
endcase.
IN ZXPADU01 I HAVE WRITTEN AS BELOW:
data : wa_p0008 like p0008,
i0008 like p0008,
l_v_ANSAL type ANSAL_15,
l_v_amount type PAD_AMT7S.
CASE innnn-infty.
when '0008'.
MOVE-CORRESPONDING innnn to wa_p0008.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008.
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008 --- I CAN SEE ONLY WHEN I COME AGAIN
IMPORTING
prelp = innnn.
endif.
when others.
endcase.
Now my problem is as follows :
i have entered the value for Ansal (ex: p0008-Ansal = 1000) ..........and i say enter then i should found the calculated value for the ansal through my coding
and it should display in bet01 as 10 ( q0008-bet01 = p0008-ansal /100)
but i dont find the value 10 being displayed for the field bet01 on the screen when
user enters Ansal as 1000 .........even then i have saved it to test the scenario......
now i came in displayed mode (pa20 ) for the infotype 008 for the same personnel no for the same dates .....where i created the record........i found that the value
bet01 is there i.e i can see the value bet01 as 10 ( my requiremnt here matching)
but when the user say enter during the time of creation of the record the value
bet01 is not getting defaulted with 10 .........why iam not able to understand
PLEASE ANY BODY HELP ME IN THIS REGARD
regards
shanti.Hi Pranesh,
i have used the logic which you hav given as below
in ZXPADU02
FIELD-SYMBOLS <fs> TYPE ANY.
ASSIGN ('(MP000800)Q0008-betrg') TO <fs>.
if <fs> is assigned.
<fs> = l_v_amount . --- amount as (ansal /100 i.e 1000/100 = 10) 10
endif.
still iam not getting the data for the field bet01
this is the coding i am using
data : wa_p0008 like p0008,
i0008 like p0008,
l_v_ANSAL type ANSAL_15,
l_v_amount type PAD_AMT7S.
FIELD-SYMBOLS <fs> TYPE ANY.
CASE innnn-infty.
when '0008'.
MOVE-CORRESPONDING innnn to wa_p0008.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008.
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
ASSIGN ('(MP000800)Q0008-betrg') TO <fs>.
if <fs> is assigned.
<fs> = l_v_amount .
endif.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008
IMPORTING
prelp = innnn.
endif.
when others.
endcase.
please help me as iam still not getting (value in bet 01) when i press enter once i enter value in ansal feild.
regards
shanti. -
Reading the data from one component view into another component view
Hi All,
I have requirement to read the data from one component into another component while creating the service order. Here are the details.
Main View for Service order: BT116H_SRVO in that we have two assignment blocks like Organizational data(BTORGSET) and amount allocation(BTAMNTALL).This two blocks are two different component which are associated with main component(BT116H_SRVO).
I need to read the sales org data from component/View(BTORGSET/Orgsetdata) into Component/View(BTAMNTALL(HdrBillPlanDet) method DO_VALIDATE_INPUT.
I searched in SDN but all the posts are related to the data exchange between two views in same component. But My scenario is different as explained above.
Refer the attachments for the component link..
Please let me know how we can achieve this one..
Thanks,
Sapsar.Finally I was able to fix my code...My Mistakes were need to read the parent node above three levels and need to use the relation entity name while reading the data..
Below is the correction code
IF iv_index IS NOT INITIAL.
lr_iterator ?= collection_wrapper->get_iterator( ).
lr_current ?= lr_iterator->get_by_index( iv_index ).
lr_entity ?= lr_iterator->get_by_index( iv_index ).
ELSE.
lr_current = collection_wrapper->get_current( ).
ENDIF.
*loop back to root entity
WHILE lr_entity->get_name( ) NE 'BTAdminH'.
lr_entity = lr_entity->get_parent( ).
ENDWHILE.
*Get the related entity
IF lr_entity IS BOUND.
lr_collection ?= lr_entity->get_related_entities( iv_relation_name = 'BTHeaderOrgmanSet' ) .
IF lr_collection IS BOUND.
lr_orgset_m = lr_collection->get_current( ).
* lr_orgset = lr_orgset_m->get_related_entity( iv_relation_name = 'BTOrgSet' ).
lr_orgset = lr_orgset_m->get_property_as_string( 'SALES_ORG' ).
ENDIF.
ENDIF.
Thanks,
Sapsar. -
Hi,
as thousands of other users, my WD Passport drive worked like a charm until yesterday and now it wont show on any computer, but does show in the Disk management and when plugged in , the Disk Management offers two ways of initialization : MBR and GPT
i dont understand any of that and want to know if any of those two methods will make the disk initialize wITHOUT loosing the data on the drive?
i looked on so many forums and some people say that it will and others that it will not erase the data.
can you please tell me what is correct?? also a suggestion is to add some more wording to that initializaiton dialog box so that we can know what initialization does and doesnt
thank you so much
tTry connecting it to a different computer to see if you can access the data, under no circumstances should you Initialize the drive as all existing data will be lost.
If you still can't access your files, then remove the drive from the case and connect it via an extra SATA cable and power connector (you usually need a desktop PC in order to do this if the drive is a 3.5 inch model, a 2.5in drive will fit into a laptop
if you have a spare slot).
J W Stuart: http://www.pagestart.com
Never be afraid to ask. This forum has some of the best people in the world available to help.
Maybe you are looking for
-
DROID RAZR PROBLEMS! When I try to edit a picture in my gallery in any way the gallery app freezes up and then the screen returns back to viewing my gallery. I went into Verizon and had told them my phone had been funny lately (but the gallery had be
-
HELP! Dreamweaver 8 won't start!
When I try to start Dreamweaver 8, it goes through it's regular start up, shows the Dreamweaver 8 startup icon but when it reaches "initializing files" it quits and I get the error message "the application Dreamweaver quit unexpectedly". I use a Mac
-
Oracle Planning Server on Redhat
Has anybody had any experience with running Oracle Planning (Server) Module on Linux. Concern's are running 5 MRP's at one time, 200 gig database. Any concerns/issues that I should consider "if you could do it over again?".
-
Screen stays on when making a phone call
I am wondering if there is a setting for making the screen go black when making a phone call. I have done some research and it seems there should be a proximity sensor that makes the screen turn off when the sensor is activated. If there is no settin
-
I need help with creating some formulas
I'm not sure if anyone around here can help me, but I'm trying to create a Numbers document and need some help with creating a formula/function. I have a column of amounts and I would like to create a formula which deducts a percentage (11.9%) and pu