Designing frames imported from JBuilder

Hello everyone, I've tried looking for that info but didn't manage. Sorry if it has already been posted.
I have imported a JBuilder project in Netbeans through the JBuilder Project Importer module and I cannot see the design of its frame classes, only the source. Is there a way to convert the Jbinit methodes or something else that can resolve my problem?
The project builds and runs just fine under Netbeans, apart from the following warning:
Note: Some input files use or override a deprecated API.
Note: Recompile with -Xlint:deprecation for details.
Note: Some input files use unchecked or unsafe operations.
Note: Recompile with -Xlint:unchecked for details.I am currently using the 1.6.0 JDK and the JBuilder project was made with the 1.4.2 JDK, if that helps.
Thanks in advance.

Those warnings (likely) have nothing to do with JBuilder or NetBeans. It's the fact that your moving from 1.4.2 to 6.
I'm currently going through the same thing (though we're only moving to 1.5). I got 4800+ "unchecked" warnings because of generics. A few others appeared (deprecated and such) but about 98% were unchecked warnings.
Some choices:
1) roll up the sleeves and fix 'em all
2) ignore them if the code still works
3) annotations (these are cool as I've just learned)
4) compiler args (nowarn, deprecation, target=1.4, source=1.4, etc.)
When you do compile with -Xlint options, you also should use -Xmaxwarns [some really high number] to see just how deep you're in. Keep bumping up the number until you see them all. As stated before, I had to go to 5000 to see them all (default is 100).
Good luck.

Similar Messages

Missing frames importing from .mov

I'm trying to import several .mov files into imovie, and am having problems with imovie removing many frames from each. The help file said that it may be a problem with FileVault being on, but I checked and it is, and has been, off. Any idea how to fix this? I'm using iMovie 4.0.1, and have OSX 10.3.9.
Thanks in advance.

iMovie is a video edit app meant to work with firewire connected miniDV camcorders
soo, any videos outside the standard settings of NTSC/PAL needs a conversion, e.g. in your case, I'm pretty sure, your files don't have 30fps, have they?
and iM/Quicktime has to "add" interlacing... that is heavily computing...
if MMFlash offers some settings in its export dialog, set to dv/NTSC… direct-from-source to wanted format is allways rcommended procedure....

Import from Enterprise is in disable mode

Hi Experts,
I am new to Xcelsius, i am trying to import data from Business Objects Enterprise, but in my Xcelsius 2008 Designer, the 'Import from Enterprise' option under Data Tab is in disable mode. Could any one please explain the reason why it is in disable mode and how to resolve to this error.
Thanks & Regards
Ramakrishna Kamurthy

My understanding is that the 30 day evaluation version is Engage version of the product. I tried a search but could not find an Enterprise Eval version. Can you provide the link to where you are downloading it.
If it is Engage it will not have the BO Enterprise import or the Export to enterprise options available. If you contact BO they should be able to give you a evaluation key for the full product.
Regards
Alan

Import from Designer crashes with IMAGE data type

Hello,
I'd like to report an issue with Data Modeler while importing from Oracle Designer. If you consider this a bug, please let me know if I need to do anything else to request a fix for it.
I've used the import > Oracle Designer Model tool to import an application model. The import runs fine for a while, then crashes with a message "There are errors in import - check log file".
The application to be imported has 509 domains, 963 entities to import.
The summary info displayed after the import (when I close the error message pop up) is:
All statements: 1472
Imported statements: 538
Failed statements: 0
Not recognized statements: 934
The log file has the lines below:
2011-04-28 10:55:46,505 [Thread-8] ERROR XMLTransformationManager - Unable to load object from XML: C:\Users\Beatriz\Documents\ODTUG\2011\SDDM designs\GAME\GAME\rel\0EEBE15E-D9EFB22E4D6B\subviews\02A206F8-0C6C-0DF9-E643-5919DBCB895A.xml
java.io.FileNotFoundException: C:\Users\Beatriz\Documents\ODTUG\2011\SDDM designs\GAME\GAME\rel\0EEBE15E-D9EFB22E4D6B\subviews\02A206F8-0C6C-0DF9-E643-5919DBCB895A.xml (The system cannot find the file specified)
     at java.io.FileInputStream.open(Native Method)
     at java.io.FileInputStream.<init>(FileInputStream.java:106)
     at oracle.dbtools.crest.model.metadata.XMLToObjectTransformer.transformToObject(Unknown Source)
     at oracle.dbtools.crest.model.metadata.XMLTransformationManager.transformFromXMLToObject(Unknown Source)
     at oracle.dbtools.crest.model.metadata.XMLTransformationManager.openDesignPart(Unknown Source)
     at oracle.dbtools.crest.model.design.Design.openDesign(Unknown Source)
     at oracle.dbtools.crest.swingui.ControllerApplication$Recent$1.run(Unknown Source)
2011-04-28 11:03:44,114 [Thread-12] WARN ODODomain - ODOType.initStructuredTypeAttributes() - Unable to find Logical DataType for: IMAGE
2011-04-28 11:03:46,532 [Thread-12] ERROR ODExtractionHandler - Error during import from Designer Repository
java.sql.SQLException: Numeric Overflow
     at oracle.jdbc.driver.NumberCommonAccessor.throwOverflow(NumberCommonAccessor.java:4380)
     at oracle.jdbc.driver.NumberCommonAccessor.getInt(NumberCommonAccessor.java:111)
     at oracle.jdbc.driver.OracleResultSetImpl.getInt(OracleResultSetImpl.java:928)
     at oracle.jdbc.driver.OracleResultSet.getInt(OracleResultSet.java:434)
     at oracle.dbtools.crest.imports.oracledesigner.logical.ODOEntity.generate(Unknown Source)
     at oracle.dbtools.crest.imports.oracledesigner.ODExtractionHandler.generateDesign(Unknown Source)
     at oracle.dbtools.crest.imports.oracledesigner.ODExtractionController$Runner.run(Unknown Source)
     at java.lang.Thread.run(Thread.java:619)
I see the issue with the IMAGE data type in the log. The model to be imported does have domains and entities using this data type. The domain actually did get imported, but it shows as "Unknown" logical type, even though there is an Image type available in the Data Modeler type list. None of the entities using IMAGE got imported.
Please let me know if you can provide a fix or workaround for this (other than changing the format in Designer).
Thank you,
Beatriz.

Hello Beatriz,
definitely this is a bug. The problem with entities is not IMAGE data type it's supported there (it's overlooked for domains). The problem is volume information - Initial, Maximum, Average, Growth rate. No workaround for that.
Domain can be changed manually if it's just one affected.
Philip

Can't see import from planning in Target Designer

Hi,
I'm using Informatica Power Center 8.1.sp5 , and trying to connect to hyperion planning 11.1.3.
Created the connection under application connection browser, but now when I go to target designer, I don't see Import From Plannig Option. Please let me know if anyone has seen this before. Thanks
Vinil

Hi Damodhar,
What front-end patch do you have installed? This works in Front-end patch 902. If possible I'd recommend upgrading to get this functionality enabled. There are also a number of other functional enhancements provided in the upgrade.
One word of warning would be that we have found some functionality has stopped working so I'd recommend performing the front-end upgrade on a test machine first.
Hope this helps,
R

4.0 EA3 import from designer and database leads to differences in compare models

Hello,
I followed two ways to import a model in Data Modeler:
1 - an import from Oracle Designer
2 - an import from the database generated on basis from Oracle Designer
Then I compare the two models in Data Modeler, and found differences ...
One of the differences is in Table check constraints. The text is the same when viewing it in the compare model.
So I opened the corresponding XML files for the tables and compared the XML for the constraint text. And there are differences:
example:
<rule>(file_locatie is not null and file_naam_org is not null) or<br/>(file_locatie is null and file_naam_org is null)</rule>
<rule>(file_locatie is not null and file_naam_org is not null) or<br>(file_locatie is null and file_naam_org is null)</rule> <<-- designer
the design imported from designer contains br, the databse imported version contains br/
This should not be considered during comparision, or better: boths imports should use the same way of formatting.
Joop

The Rule specification is not re-formatted in Data Modeler code; it is stored as extracted from the database.
For Oracle Database, the Rule is extracted using SQL of the form SELECT search_condition FROM dba_constraints/all_constraints WHERE constraint_type = 'C';
For Oracle Designer, the Rule is extracted using SQL like SELECT txt_text FROM rm_text_lines WHERE txt_type = 'CDWHCL';
Are you able to tell how your Table Check Constraint is represented (with respect to the 'br') in your Database and Designer?
Regards,
Tony

Dropped frames when importing from sony dcr-hc52

hey all,
i'm getting a lot of dropped frames when importing from my sony cdr-hc52. anyone had this experience? is there a setting i'm missing that would correct this?
thanks in advance,
filmgrrrl

Hello kellyfromkenley, Depending on how you move the video or share the video from iMovie to iDVD it can make a big difference. One way is to go to the Share Menu > Share to iDVD. But the better is to Share to Media Browser instead. Try this:
Go back to iMovie and open your Project in Project Library.
Go to Share Menu > Share to Media Browser
Choose the Large size and let it run until it finishes
Quit iMovie and open iDVD.
In iDVD click on the Media Button, then click on the Movies button and look for your project under the iMovie star icon in the Media Browser itself.
Drag that project icon into the iDVD project window and burn another disk
I think you'll see an increase in the visual quality using this method.
The reason this has an effect on the visual quality is there's a whole different set of operations performed on the video when you first Share to Media Browser. The side effect of those changes in steps is a much better looking DVD from your iMovie project.

Import from my hard drive

From my videocamera hd i copy some clips to my hard drive. Then from my imovie, i try to import those clips but imovie do not recognize those clips. Then i try directly to import from the video camera and it works. Is there a way to import clips from the hard drive. Thanks

From my videocamera hd i copy some clips to my hard drive. Then from my imovie, i try to import those clips but imovie do not recognize those clips. Then i try directly to import from the video camera and it works.
This is probably normal for the compression format involved. Finder level importing of files works differently than camcorder importation. In the first case, iMovie does not perform any conversion because it expects the user to only import "edit" compatible files. In the latter, Apple is attempt to add support for the newer delivery compression formats now being adopted as a medium for storing video content but which are not designed for editing purposes. In these cases, the iMovie '08 software attempts to negotiate the proper protocols to communicate with the various hardware devices, identify the specific source file compression format, and apply the proper conversion to make the files iMovie '08 compatible during the importation process. HDV and AVCHD content are normally converted to AIC files when imported from a camcorder. If you have Final Cut HDV codecs installed on your computer, I believe HDV files may be imported at the file level. AVCHD, on the other hand, does not, to my knowledge, have a QT component that will allow such content to be imported at the file level to iMovie '08 so a third-party conversion application is necessary here. (I believe Voltaic is most often recommended for this.) Lastly, camcorders using HDD/DVD storage are normally stored as "muxed" MPEG-2/AC3 content which is not "edit" compatible in QT applications in its "native" format. iMovie '08 can, however, demux such files to elementary streams, convert the audio to AIFF in an MOV container, transform the P/B-frames to all MPEG I-frames and merge the result with timing offsets into the MOV file container with minimal audio/video drift. These files can also be imported at the file level but do require an MPEG-based, third-party application to convert the files first.
Is there a way to import clips from the hard drive.
Yes, As indicated above, all files can be imported at the "Finder" file level if first converter to an iMovie '08 compatible format or if you have the appropriate codec component installed. However, in order to select the best work flow here, it is first necessary to know what type of file you are dealing with you your particular case. The method referred to be AppleMan is normally used by individuals who cannot get their files to import directly from the camcorder which does not seem to be your problem. Basically, you have the option of picking and choosing your preferred method of import whereas many others do not.

Import from Illustrator?

So I see that there's a Photoshop CC Connect feature in Reflow. Bypassing the issue of how well it works, wouldn't it make sense to extend this functionality to Illustrator soon?
Designs often come from working in Illustrator or passing PDFs from elsewhere through Illustrator and I see more of a correlation between html-css objects and Illustrator's vector objects than raster art. If a realtime connection isn't feasible then at least an import feature could save us a lot of time. Creating entirely within Reflow is still slower than Illustrator and there's no other form of import (html, etc.) available. There's also no direct way to go from Illustrator to Photoshop to then connect to Reflow.

It says here - http://help.adobe.com/en_US/aftereffects/cs/using/WS3878526689cb91655866c1103906c6dea-7f7c a.html#WS3878526689cb91655866c1103906c6dea-7f54a"
"Create your document in Illustrator CS5 using one of the Video And Film document profiles. In addition to creating a document at the appropriate size for video or film work, this creates a document with two artboards: one at the appropriate frame size, and one much larger. When you bring such a document into After Effects, the area outside the smaller artboard isn’t cropped and lost; it’s retained outside of the composition frame. This only works for an Illustrator document with multiple layers imported as a composition."
Ok I just tested this with a new document and its correct it doesnt crop however for some reason in the document I am working on the outside artboard has disappeared. ANyone know why?

ORA-02248 when importing from the RAU

Designer 6i rel. 4.6
ODS 10g rel. 9.0.4
Oracle 9.2.0.5
I did a full Designer 6i repository export from the RAU and then imported the dmp file into another Designer 6i repository from its RAU. The RAUs from both instances use the import/export utilities from ODS 10g rel. 9.0.4.
The export completes succesfully, but the import gives me the following warnings:
IMP-00017: following statement failed with ORACLE error 2248:
"ALTER SESSION SET "_PLSQL_LOAD_WITHOUT_COMPILE" = TRUE"
IMP-00003: ORACLE error 2248 encountered
ORA-02248: invalid option for ALTER SESSION
IMP-00017: following statement failed with ORACLE error 2248:
"ALTER SESSION SET "_PLSQL_LOAD_WITHOUT_COMPILE" = FALSE"
IMP-00003: ORACLE error 2248 encountered
ORA-02248: invalid option for ALTER SESSION
I've searched Metalink but the only relevant information I could find was Note 19481.1. This note hasn't been updated since 1999, so I don't know if it's still relavent to the above versions.
Does anyone know what these warnings mean?
Thanks.

Yes I got it and talked to Oracle. As per them its a bug but I got a workaround for this problem.
If you still haven't got throught this mail me at [email protected]
Regards
Nikunj sharma

Images imported from library are empty

Sorry, I did post this query a few days ago, and I did get a
response but unfortunately it did not help.
When I import my images to the library, I can see them fine
in the viewer window. However, when I drag the images to the stage
I get just an empty frame. I do not know what the problem is. I
have tried importing the same images into a stage on an older
version of Flash and there is no problem. I see the images fine.
So, what can be the problem with Flash CS3.
I was advised by this forum to check to make sure the
"outlines" option was turned off on that layer. I tried this, but I
had no luck. Interestingly though if I work in Flash 8 on the same
computer and then import the Flash 8 files to CS3 I can then see
images I import from the library, even after I have converted the
Flash 8 files to CS3 format. At the moment it is the only way I can
work with CS3. Does anyone have any advice on what to do?
Thanking you all,
Mary

Hi
There are several layers to this.
a. There are no HD-DVD - DVD is as standard only Standard Definition as on old CRT-TVs and can never be anything btter as iPhoto showes on Your Mac screen (5 to 10 times higher resolution)
b. One can get a result less than iDVD SD quality and down to really bad by
• Using iMovie'08 or 09 or 11 - as they discard every second line in the picture = 50% loss
• Using iMovie HD6 and NO Ken Burns effect AND "Share to iDVD" as this also results in disaster (heavely pixelated Bad bad pictures) - (as iMovie will render badly)
c. I build my SlideShow in
• iMovie HD6 - and no Ken Burns effect - BUT I close iMovie and import iMovie movie project (SlideShow) from within iDVD and now iDVD will render and so much better.
• FinalCut also delivers maximal quality over to iDVD
(from FCE/P - Export out as QuickTime .mov - NO QuickTime conversion (Important))
• iMovie'08 to 11 - I Share to Media Browser and as Large (not HD or other)
iMovie HD6/FinalCut + iDVD will give as high quality possibly to the resulting DVD.
I use
• Verbatim DVD-R
• set down burn speed to x4 (Plays better on many DVD-Players)
• Pro Quality encoding - I got the time and like the result
Yours Bengt W

How import from camcorder to iMovie as one clip?

When I import from my mini-dv camcorder (Canon) into iMovie '09, iMovie splits into many clips. The problem is, it gets confused and about 10% of the clips are like 0.1 sec and named something not related to date/time like the rest of the clips. As a result, they appear in the event library out of order, creating a mess. I just want to import as one clip to avoid this misordering. My objective is archive video from tape to hard drive. As background, I suspect the timecodes may be wacky on the mini-dv tape because it is a copy from an 8mm tape.
I have many of these mini-dv tapes so an answer to this problem will save me many hours. I can achieve a 1-clip import using Vidi, but it won't automatically stop recording so I can't start one importing when I go to bed.
Thanks

I have the same problem. The video was created with a sony hcr-dc96 using the "smth int rec" mode. The would be a "time lapse video" in English. I suspect every frame looks like a new scene to the importer.
It imports and creates an even, but if I click on the event I get the beach ball and unresponsiveness, and eventual crash. Looking at the even library I can see there are 3249 files in the folder corresponding to that event.
Is there any way to recover using imovie? Do I need to import using some other means?

Jumpy, choppy animation (imported from Illustrator)

Hello, I am having a problem with some vines I imported from illustrator having very choppy animation. Every other animation in my project thus far has been smooth, except for the vines which I just want to move slowly and slightly as if blowing in the wind. I did the same effect for some leaves in the background which animate fine, so its something to do with the vines in particular.
I imported all the shapes from Illustrator (the vine shafts, leaves, and thorns) which came into flash as "drawing objects". I then turned every piece into individual movie clips, and then combined everything further into 4 seperate movie clips I could animate. The animation is very simple, just rotating back and forth ever so slightly accrost 250 frames.
I uploaded the .swf in question which you can download here: http://www.filedropper.com/splashscreen10
I appreciate any and all help! Thanks!

From the sound of it, I'm having this exact same problem. Does anyone have suggestions for how to solve this problem?

Migration of Designer Repository Owner from 7.3.4 to 8.1.7

My goal is database import from Oracle 7.3.4(Windows NT 4.0) to Oracle 8.1.7( Linux 7.1).
But, I have problem with importing Objects of Designer Repository Owner( no matter whether Designer 2.1 or Designer6.0).I gave Designer Repository Owner all necessary privileges an roles,but import just hangs! I can't find in log some exact information.
Thanks in advance!

I do that-full export,then full import.Then I found out that Designer Owner makes problem.
I tried to import only Designer Owner, but it didn't work again!

Save me! Missing pics after import from CD? what the..?

Hello Mac superstars,
I'm on a macbook pro from late 2011, on lion so I think that I would then have iphoto 11?
Here's my story:
- Imported some photos from disc & first event created. But after ejecting disc, couldn't view pictures in iphoto (thumbnail fine, shows up in event but can't open to view full picture).
- Re-inserted disc, uploaded same pics to desktop then imported same pics from desktop into iphoto, to a new event.
- Think I opened the wrong event (direct from CD) and created an album & began editing. But disc was still in there so must have been working from disc?
- All was working fine for a while there...couldn't view photos at all.
- Then, I thought I deleted the original event with the pics uploaded from CD but may have deleted the event with the import from desktop??
- Can't restore from iphoto trash, original files nowhere to be found on my mac.
- Can't find photos from when they were saved to desktop using remorecovery software
All other photos fine, just this one group of photos missing .. Please provide troubleshooting tips!!
Many thanks

Thre's nothing odd here, it's exactly by design and as you have chosen.
You imported from a CD in a Referenced Library. If you run a Referenced Library then you decide where the files are stored. You decided they are stored on the CD. Now there is no CD there are no files.
When you import any files in any iPhoto set up, the app creates a thumbnail for fast viewing in the iPhoto Window. That thumbnail is stored in the Library package. That's why you can see it.
So, these files were never on your HD - or if they were they were deleted - so unless you're willing to run expensive File Recovery software there is no way to get them back.
If you wish to try something like File Salvage you may be lucky, if the files were on the HD at some point and if they haven't been overwritten since.

Designing frames imported from JBuilder

Similar Messages

Maybe you are looking for