Designjet 111 Printer Utility Issues with Mavericks

Hi There,
I am using an HP Designjet 111 with tray, and no matter how many times I install the driver, when I launch the printer utility I get the following message:
"The utility could not be launched. Utility not found. Please reinstall your software."
I've already done this about 5 times now and no improvement, if anyone has had this trouble I'd appreciate your help as I really need to use the utility to do a printer head clean etc.
Thanks.

Hi Greg,
This is the link I am using.
At the end of the install, it says that I cannot use the setup assistant because the disk image has not been ejected?
Thanks for your help on this
http://h20566.www2.hp.com/portal/site/hpsc/public/psi/swdHome/?lang=en&cc=au&sp4 ts.oid=4123144

Similar Messages

Any fix for the PC based network printer communication issue with Mavericks?

Any fix for the PC based network printer communication issue with Mavericks?

I just signed up for FIOS and am not experiencing your problem (had enough other ones instead).
Go to mail preferences ~ click on a mail account ~ click on the advanced tab. The only settings that worked for me were: port 110 SSL OFF, authentication: Authenticated POP (APOP). If I remember correctly when I first set this up another window opened and I typed in my password and never had to do that again.
Hope this helps.

Canon pixma mx922 compatibility issues with Mavericks?

Thinking of getting canon pixma mx922. Any body had compatibility issues with Mavericks?

Go to http://support.apple.com/kb/HT3669 for a list of printers that are still supported.
If you don't see the printer, check Printer software no longer available through Software Update.

I use an older Macbook Pro from 2007 with OS X 10.7 – had issues with Mavericks, so I uninstalled it. I want to get a trial version of AE CS6 but I need to know the specs for it.

I use an older Macbook Pro from 2007 with OS X 10.7 – had issues with Mavericks, so I uninstalled it. I want to get a trial version of AE CS6 but I need to know the specs for it.

System requirements | After Effects

HT6030 Sound output issue with Mavericks

There is a sound output issue with Mavericks and Firewire800 Audio devices. I am using a MIO 2882 but now people are having issues with other devices as well. Is this something that will be addressed in an update? If not I will need to downgrade my OS.

maybe the adapter went bad.....fast. try getting one thats made by sony. or apple. i have had bad luck with some cheap products i bought.
or maybe thats the brand you have ad luck with. i remember when i use to get some quantom fireball drives, and they just died on me the next week. im down to two and keeping a good eye on them. especially fujitsu. the only ones i have GREAT LUCK with are Seagate and Western digitals drives.

What is the best laser wireless printer to use with Mavericks?

What is the best laser wireless printer to use with Mavericks?
I am currently connecting my printer via USB cable to Airport Express.
Do any laser printers work better than other?
Thanks in advance!!

I got this Brother printer:
http://thewirecutter.com/reviews/brother-hl-2270dw-best-laser-printer/
It has been great for me. I have it connected to my Time Capsule and it works great.

Scanning Issue with Maverick and Office Jet Pro 8600

Just wanted to add my voice to the numerous problem reports. Specifically:
1) I could scan just fine until I upgraded to Maverick (Mac OS 10.9)
2) to address the problem, I downloaded the latest HP drivers for 10.9-didn't help
3) Tried to use the separate HP Scan application-no luck; couldn't fine the computer (even though I have been printing regularly)
4) Based on the HP problem solution posting (which seems a bit out of date), tried to uninstall the software and reinstall; the uninstall would not complete, although it did delete all of my printers.
It appears that it is finally time to abandon HP for printers, if they can't keep up with Apple's releases.

Hi amaltz,
I understand you are having an issue with the scan software working with Mavericks. I can't help you with this. My suggestion is to completely remove all HP software from the computer and reinstall. Follow the instructions below to resolve the issue.
Scrub
Open the Applications folder > HP or Hewlett Packard folder > HP Uninstaller
Click continue, click on one of the printers in the list.
Hold down Control, Option and Command
While holding the three buttons down, Click uninstall.
Reset Printing System
Click the Apple icon ( ), and then click System Preferences.
In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
Right-click (or Ctrl +click) in the left panel, and then click Reset printing system…
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Repair Disk Permissions (I know many of you have done this but because we have now done a scrub it is good measure to ensure non of your permissions differ)
On the Dock, click Applications, and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
Click the Repair Disk Permissions button at the bottom of the window.
Once the repair is complete, restart the computer.
Restart the computer.
Now you will have a fresh start and be able to reinstall the software. Please let me know if this resolves the issue you are experiencing. If it does not, I will gladly follow up.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

System Image Utility - Issues with making bootable images

During the image creation process for a Netboot, the System Image Utility reports an error. I've included the log file (everything before the removal of the bad image below).
------------Begin Log File --------------
2006-06-02 13:19:25 -0400 Initiating user authentication
2006-06-02 13:19:28 -0400 Image creation in progress
2006-06-02 13:19:28 -0400 Starting image creation
newfs_hfs:
2006-06-02 14:10:30 -0400 b=400: bitmap clump size is too small
--------------End Log File--------------------
I have no issue creating images from restore disk sets (that shipped with machines) or retail masters of various OS's. This issue seems to be related to the particular drives I am trying to create images from.
The drives that give me this error are hardwarily OK and the software works great. I can boot from these drives and have no issues with the machines imaged from them after the fact. I just want to Netboot off of these so I don't have to lug a million drives around...
Any clue?

i know that was the case in Leopard and Snow Leopard but i just mounted a leopard image to create a new netrestore on my lion server. i was not able to boot any of my images created on Leopard or SL when running Lion Server. I assume i need to recreate the images on Lion. Right now my Lion server is using a leopard image as the source to create a netrestore i can push on the Lion server.

What printer will work with Maverick OS 10.9

I recently purchased a Brother HL- 2280 DW only to find that the device doesnt support Maverick OS 10.9. Plus I am having a problem finding a printer that will work with Maverick OS 10.9 (Perhaps that is why it is named Maverick) Please help!

Bopfromphillie wrote:
I did not get past loading the cd that came with the printer. It stated that my my operating system was not supported.
I personally avoid loading any crapware that comes with peripheral devices, printers, scanners, hard drives, etc. Very little of it is useful on a Mac.
Should I have ignored the cd info and gone ahead and plugged the printer into my Mac Pro then loaded the cd from brother?
No. You should have just plugged in your printer and added it in the Printers & Scanners System Prefs without loading the CD at all.

Are there any compatibility issues with Mavericks and EMC Celerra File shares, particularly with the SMB protocols?

Our company uses a EMC Celerra file share, but most of our users are Windows based. We have a small production department of 7 macs. Starting with Snow Leopard, we noticed some issues with SMB. We were able to resolve those issues, but had to wait to upgrade to Lion because there were additional SMB or permissions concerns with the Celerra file share and Lion. Now, we are again waiting to upgrade to Mavricks because of the way it handles user permissions. Does anyone using Mavericks now also connect to a EMC Celerra file share? Thanks!

Our company uses a EMC Celerra file share, but most of our users are Windows based. We have a small production department of 7 macs. Starting with Snow Leopard, we noticed some issues with SMB. We were able to resolve those issues, but had to wait to upgrade to Lion because there were additional SMB or permissions concerns with the Celerra file share and Lion. Now, we are again waiting to upgrade to Mavricks because of the way it handles user permissions. Does anyone using Mavericks now also connect to a EMC Celerra file share? Thanks!

Adobe Premiere Pro Issues with Maverick

Hello Apple friends, photographers, and video editors
Since I installed Maverick, I have the following issues with Adobe Premiere Pro CS6:
Why in **** did I update before waiting 6 months...
- browser window flashes on then disapears when importing new files.
- browser window sometimes shows all items gryed out when importing files.
- cannot "Link Media" by example multiple TIFF and one EDL file for subtitles. 1st time menu quickly appears then disapears, then all is greyed out.
I have a mid 2012 Macbook PRo Retina with SSD @ 50% capacity. All else is extremely fast.
All my Adobe Master Collection CS6 is up to date.

Suggest you post on the Adobe forums since it's their software you're having issues with.

Are there any issues with Maverick and Canon Pro10 printers

Are there any issues with Canon Pro10 printers, Dymo 450 LaserWriter and Epson SX400 with the new Maverick?

Try searching these forums and "Googleing" those devices on the web.....
Barry

USB drive issues with Maverick

Good day Apple friends,
Since I installed Maverick I have numerous issues with my Macbook Pro-Retina mid 2012.
When I connect my usual USB drives they don't react the first time. I always have to deconnect and immediately reconnect to make it work.
It is not a question of delay, it is a question of 1st or 2nd time. I basically go: connect, disconnect, reconnect and voilà!
It happens with many 2-4-8 GB USB sticks which were fine before Maverick. It does NOT happen with SD cards though.
Why?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Mail issues with Mavericks

I have just installed Mavericks on my MacBook Pro running OSX version 10.9. I am now unable to view and open incoming mail. From the menu I can create a new message.The icon indicates that mail has arrived into the mailbox. When I click on the 'Mail' icon it brings up the menu bar only.

Hello Tom
Start with the article below for troubleshooting issues with Mail and your outgoing server.
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Regards,
-Norm G.

Installation issues with mavericks

I have an early 2011 - 15" Macbook Pro which I have recently tried to upgrade to OS X 10.9 Mavericks. The installer grey's out the only hard drive on the system despite having 349.0 GB free on the drive. I have looked at the permissions, I have checked the format and even done the CMD + R on reboot but to no avail. Does anyone have any ideas? There appears to be no partition on the drive so I am stumped. Funnily enough my 2008 Mac Pro had no issue with the upgrade. Any thoughts or ideas welcome.

Hi mikeallan35!
I have an article that may help you resolve this issue with installing Mavericks on your computer:
Firmware updates for Intel-based Macs require a GUID partition scheme
http://support.apple.com/kb/ht2434
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Designjet 111 Printer Utility Issues with Mavericks

Similar Messages

Maybe you are looking for