Desktop icons go off the screen

My son was most likely trying to play a game and I am thinking he changed the screen somehow. Now, my screen icons go off the page. My menu bar at the top alos moves so the time, etc., are not fixedin the top right corner. Where do I go to change this.
Mac OSX
Version 10.6.7
Many thanks to anyone that can help me with this.

Try going to System Preferences - Universal Access and set Zoom to Off.
BTW you probably want to change your profile, it says you're using 10.6.4 which I'm guessing is incorrect.

Similar Messages

Imac display problem, the resolution seems to be unusual, top bar and all folders on the desktop background is off the screen

Need help with 21" imac display problem. The resolution seems to be unsual, everything on the desktop background goes off the screen. The resolution is set at 1920 x 1080

Quit the game and restart the iPad.
To quit the game - Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
If that doesn't work try this.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

[FIXED BUT NOT SOLVED] NVIDIA - Desktop shifted left off the screen...

Hello Community!
For a pretty long time right now, I am trying to fix the video setup of my HTPC but without success. Because I'am run out of ideas, I really need Your help.
PROBLEM:
The desktop is shifted left off the screen, round about 100 Pixel.
It started some time in the past, while upgrading a one year old Ubuntu installation (NVDIA drivers). Because I couldn't fix it and also wanted to replace Ubuntu with ArchLinux, I performed a clean ArchLinux installation.
First I used the nouveau drivers ending up with the same problem. I read an configured using xrandr and cvt, but with no success.
So I restored the system to a snapshot taken before X11 and nouveau drivers installations, thank's BTRFS, and installed the proprietary NVIDIA drivers ending up with the same problems. Again I tried all the tips and tricks found in the documentations and forums, used nvidia-xconfig, hand crafted the xorg.conf all with no success.
HARDWARE
The system is a MSI Media Live (http://www.msi.com/product/desktop/Media-Live.html)
. Support AMDR Athlon 64 X2, Athlon 64 and Sempron in the Socket AM2 package
. North Bridge: nVidia® C51PVG Chipset
. South Bridge: nVidia® MCP51 Chipset
. Graphics is Integrated NVIDIA GPU GeForce 6150 LE
. VGA, SCART and HDMI - Connectors
The display Problem is on VGA and HDMI now, where in the past the VGA was perfect. Therefor I connected and used the VGA port only, in all tests.
INSTALLATION HISTORY
2012-12-30 + Installation according ArchLinux install guide
2012-12-31 + pacman -S openssh
systemctl start sshd
2012-12-31 + pacman -S btrfs-progs
2012-12-31 pacman -S sudo
2012-12-31 + sudo pacman -S bash-completion
2013-01-03 + pacman -S rsync wget gptfdisk
2013-01-10 + pacman -Suy nvidia-304xx
2013-01-10 + pacman -Syu nvidia-304xx-utils
2013-01-10 + pacman -S xorg-server xorg-xinit xorg-server-utils
2013-01-10 + pacman -S mesa
2013-01-10 + pacman -S xorg-twm xorg-xclock xterm
2013-01-10 + pacman -S ttf-dejavu
2013-01-10 + pacman -Suy lxdm
2013-01-10 + systemctl enable lxdm.service
2013-01-10 + pacman -S xorg-xdpyinfo
2013-01-10 + pacman -S pkgtools
2013-01-10 + pacman -S pkgfile
2013-01-10 + pacman -S bc
As You can see, I installed only a minimal X11 environment for test. The lxdm display manger shows up but with very small font and shifted to the left. Only if I force a resolution of 1024x768 the image is centered on screen/tv but still the very small font. Obviously not a solution for a HTPC.
Here are the xorg.conf and the Xorg.0.log of my last test configuration.
xorg.xonf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 304.64 (buildmeister@swio-display-x86-rhel47-12) Tue Oct 30 12:04:46 PDT 2012
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 100 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
In the Section "ServerLayout" I modified the line
Screen 0 "Screen0" 100 0
by adding the 100 0 at the end.
Xorg.0.log
[ 12.997]
X.Org X Server 1.13.1
Release Date: 2012-12-13
[ 12.997] X Protocol Version 11, Revision 0
[ 12.997] Build Operating System: Linux 3.7.0-1-ARCH x86_64
[ 12.997] Current Operating System: Linux media-pc 3.6.11-1-ARCH #1 SMP PREEMPT Tue Dec 18 08:57:15 CET 2012 x86_64
[ 12.997] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=0f1f870d-ccaa-4bc2-b149-1792f0c69fce
[ 12.997] Build Date: 16 December 2012 04:45:14PM
[ 12.997]
[ 12.997] Current version of pixman: 0.28.2
[ 12.997] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 12.997] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 12.998] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan 18 13:18:12 2013
[ 13.065] (==) Using config file: "/etc/X11/xorg.conf"
[ 13.065] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 13.066] (==) ServerLayout "Layout0"
[ 13.066] (**) |-->Screen "Screen0" (0)
[ 13.066] (**) | |-->Monitor "Monitor0"
[ 13.066] (**) | |-->Device "Device0"
[ 13.066] (**) |-->Input Device "Keyboard0"
[ 13.066] (**) |-->Input Device "Mouse0"
[ 13.066] (==) Automatically adding devices
[ 13.066] (==) Automatically enabling devices
[ 13.066] (==) Automatically adding GPU devices
[ 13.213] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 13.213] Entry deleted from font path.
[ 13.213] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 13.213] Entry deleted from font path.
[ 13.222] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 13.222] Entry deleted from font path.
[ 13.222] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 13.222] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 13.223] Entry deleted from font path.
[ 13.223] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 13.223] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 13.223] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 13.223] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 13.223] (WW) Disabling Keyboard0
[ 13.223] (WW) Disabling Mouse0
[ 13.223] (II) Loader magic: 0x7fcc40
[ 13.223] (II) Module ABI versions:
[ 13.223] X.Org ANSI C Emulation: 0.4
[ 13.223] X.Org Video Driver: 13.1
[ 13.223] X.Org XInput driver : 18.0
[ 13.223] X.Org Server Extension : 7.0
[ 13.226] (--) PCI:*(0:0:5:0) 10de:0241:1462:3290 rev 162, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfc000000/16777216, BIOS @ 0x????????/131072
[ 13.226] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 13.226] Initializing built-in extension Generic Event Extension
[ 13.226] Initializing built-in extension SHAPE
[ 13.226] Initializing built-in extension MIT-SHM
[ 13.226] Initializing built-in extension XInputExtension
[ 13.227] Initializing built-in extension XTEST
[ 13.227] Initializing built-in extension BIG-REQUESTS
[ 13.227] Initializing built-in extension SYNC
[ 13.227] Initializing built-in extension XKEYBOARD
[ 13.227] Initializing built-in extension XC-MISC
[ 13.227] Initializing built-in extension SECURITY
[ 13.227] Initializing built-in extension XINERAMA
[ 13.227] Initializing built-in extension XFIXES
[ 13.227] Initializing built-in extension RENDER
[ 13.227] Initializing built-in extension RANDR
[ 13.227] Initializing built-in extension COMPOSITE
[ 13.227] Initializing built-in extension DAMAGE
[ 13.227] Initializing built-in extension MIT-SCREEN-SAVER
[ 13.227] Initializing built-in extension DOUBLE-BUFFER
[ 13.227] Initializing built-in extension RECORD
[ 13.227] Initializing built-in extension DPMS
[ 13.227] Initializing built-in extension X-Resource
[ 13.227] Initializing built-in extension XVideo
[ 13.227] Initializing built-in extension XVideo-MotionCompensation
[ 13.227] Initializing built-in extension XFree86-VidModeExtension
[ 13.227] Initializing built-in extension XFree86-DGA
[ 13.227] Initializing built-in extension XFree86-DRI
[ 13.227] Initializing built-in extension DRI2
[ 13.227] (II) LoadModule: "glx"
[ 13.414] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 15.559] (II) Module glx: vendor="NVIDIA Corporation"
[ 15.559] compiled for 4.0.2, module version = 1.0.0
[ 15.559] Module class: X.Org Server Extension
[ 15.559] (II) NVIDIA GLX Module 304.64 Tue Oct 30 11:18:32 PDT 2012
[ 15.560] Loading extension GLX
[ 15.560] (II) LoadModule: "nvidia"
[ 15.560] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 15.868] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 15.868] compiled for 4.0.2, module version = 1.0.0
[ 15.868] Module class: X.Org Video Driver
[ 15.868] (II) NVIDIA dlloader X Driver 304.64 Tue Oct 30 10:59:51 PDT 2012
[ 15.868] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 15.868] (++) using VT number 7
[ 15.875] (II) Loading sub module "fb"
[ 15.875] (II) LoadModule: "fb"
[ 15.984] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 16.008] (II) Module fb: vendor="X.Org Foundation"
[ 16.008] compiled for 1.13.1, module version = 1.0.0
[ 16.008] ABI class: X.Org ANSI C Emulation, version 0.4
[ 16.008] (II) Loading sub module "wfb"
[ 16.008] (II) LoadModule: "wfb"
[ 16.008] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 16.025] (II) Module wfb: vendor="X.Org Foundation"
[ 16.025] compiled for 1.13.1, module version = 1.0.0
[ 16.025] ABI class: X.Org ANSI C Emulation, version 0.4
[ 16.025] (II) Loading sub module "ramdac"
[ 16.025] (II) LoadModule: "ramdac"
[ 16.025] (II) Module "ramdac" already built-in
[ 16.025] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 16.025] (==) NVIDIA(0): RGB weight 888
[ 16.025] (==) NVIDIA(0): Default visual is TrueColor
[ 16.025] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 16.026] (**) NVIDIA(0): Enabling 2D acceleration
[ 19.582] (II) NVIDIA(GPU-0): Display (Acer AT3220 (CRT-0)) does not support NVIDIA 3D
[ 19.582] (II) NVIDIA(GPU-0): Vision stereo.
[ 19.584] (II) NVIDIA(0): NVIDIA GPU GeForce 6150 LE (C51) at PCI:0:5:0 (GPU-0)
[ 19.584] (--) NVIDIA(0): Memory: 262144 kBytes
[ 19.584] (--) NVIDIA(0): VideoBIOS: 05.51.28.56.19
[ 19.584] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 19.584] (--) NVIDIA(0): Valid display device(s) on GeForce 6150 LE at PCI:0:5:0
[ 19.584] (--) NVIDIA(0): Acer AT3220 (CRT-0) (connected)
[ 19.584] (--) NVIDIA(0): TV-0
[ 19.584] (--) NVIDIA(0): DFP-0
[ 19.584] (--) NVIDIA(0): Acer AT3220 (CRT-0): 350.0 MHz maximum pixel clock
[ 19.585] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
[ 19.585] (--) NVIDIA(0): TV encoder: (null)
[ 19.585] (--) NVIDIA(0): DFP-0: 310.0 MHz maximum pixel clock
[ 19.585] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[ 19.585] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 19.585] (**) NVIDIA(0): device Acer AT3220 (CRT-0) (Using EDID frequencies has
[ 19.585] (**) NVIDIA(0): been enabled on all display devices.)
[ 19.585] (==) NVIDIA(0):
[ 19.585] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 19.585] (==) NVIDIA(0): will be used as the requested mode.
[ 19.585] (==) NVIDIA(0):
[ 19.585] (II) NVIDIA(0): Validated MetaModes:
[ 19.585] (II) NVIDIA(0): "CRT-0:nvidia-auto-select"
[ 19.585] (II) NVIDIA(0): Virtual screen size determined to be 1360 x 768
[ 19.587] (WW) NVIDIA(0): Unable to support custom viewPortOut 1360 x 765 +0 +1
[ 19.588] (WW) NVIDIA(0): Unable to support custom viewPortOut 1360 x 765 +0 +1
[ 19.589] (--) NVIDIA(0): DPI set to (49, 48); computed from "UseEdidDpi" X config
[ 19.589] (--) NVIDIA(0): option
[ 19.589] (--) Depth 24 pixmap format is 32 bpp
[ 19.599] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 19.599] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 19.599] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 19.599] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 19.599] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 19.599] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 19.599] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 19.599] (II) NVIDIA(0): Config Options in the README.
[ 19.599] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
[ 19.754] Loading extension NV-GLX
[ 19.797] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 19.797] (==) NVIDIA(0): Backing store disabled
[ 19.797] (==) NVIDIA(0): Silken mouse enabled
[ 19.798] (**) NVIDIA(0): DPMS enabled
[ 19.798] Loading extension NV-CONTROL
[ 19.799] Loading extension XINERAMA
[ 19.799] (II) Loading sub module "dri2"
[ 19.799] (II) LoadModule: "dri2"
[ 19.799] (II) Module "dri2" already built-in
[ 19.799] (II) NVIDIA(0): [DRI2] Setup complete
[ 19.799] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 19.799] (--) RandR disabled
[ 19.817] (II) Initializing extension GLX
[ 20.522] (II) config/udev: Adding input device Power Button (/dev/input/event3)
only removed the input detection stuff
Question
How can I shift the display to the right?
Many thanks for any hints.
rale
Last edited by rale (2013-01-19 11:46:14)

Mr.Elendig wrote:Switch to dvi/hdmi if you can. Else you have to play with screen calibration etc.
Thank You Mr.Elendig!
The simplest answer often is best. After I connected a TFT display, instead of my TV, I was able to calibrate the screen output and got the desktop shifted. Knowing that, I tried the settings of my TV again. There is a hard to find option for calibration wich is set to automatic but doesn't do it. Trying to turn it of did the trick. Even the option stays on automatic and even the display format is fixed to 4:3 instead of 16:9, finaly the TV adjusted the display correctly.
None the less, the problem not to be able to shift the desktop using the screen paramters in xorg.conf remains.
Thanks
rale

After successful install of Windows 7, the desktop edges are off the screen. Please help.

I'd used the previous bootcamp and win xp just fine. Just bought a new mac mini and a new copy of windows 7 (well, an upgrade where I did the clean install approach). I have this mac mini approached to an LCD tv using an HDMI connection.
No matter what I've tried, I can't force the desktop to not be off the edges (unless I go to a super small resolution where it looks crappy).
The Lion/mac operating system does just fine with the LCD/HDMI connection. In Windows, I've played around with the resolutions, ran an update for the graphics driver, and checked my TV settings for an "overscan" setting.
None of the above worked.
I tried looking in the windows settings for something with the graphics card but I think I'm looking in the wrong area. I've seen discussion boards talk about a "just scan' setting but I can't find that on my TV menus or in windows.
Any suggestions?
Thanks.

No one?
I've been doing more research and it seems the issue may be in some setting with the graphics card but for the life of me I haven't been able to find it. I have the new mac mini. Anyone?
Thanks.

Print preview toolbar has too many icon & spreds off the screen.

Hi
Ubuntu 11.04, Firefox 6.0.1
When I bring up 'Print Preview' there are a load of icons I don't want on the toolbar & they cause the 'Close Preview' to end up off screen. How do I edit the 'Print preview toolbar'; I've tried right click but nothing happens?
Have fun
d0m.

In my updated firefox, the print button does NOT open print preview first.
How can I access print preview function?

The entire window went off the screen to the right, can see icon at bottom but when I click on it it zips off to the right.

I was working in Firefox and clicked on something which made the entire window flash off to the right, unable to be seen. The Firefox icon is available at the bottom but when I click it, it sends the screen off to the right. Click on icon again and it will take it from "off the screen" back into the icon. I tried restarting with no change. It only affects one user on the computer.

Hi,
See if these Links for Home Sharing add any light to the problem
Understanding
http://support.apple.com/kb/HT3819
Troubleshooting
http://support.apple.com/kb/TS2972
How to
http://support.apple.com/kb/HT2688

I was asked to download the iOS on my ipad3 which then completed automatically but instead iTune with a plug-in icon came on the screen. SInce then I can't operate the ipad even after I switch it off and on again. The icon just monopolize the screen.

I was asked to download iOS on my ipad3 which the completed automatically but instead iTune with a plug-in icon came up on the screen. SInce then I can't operate the ipad3 even after I switch off and on again. That icon just monopolize the screen ! What shall I do now? Please help.

Try and put your iPad in recovery mode
http://support.apple.com/kb/ht1808

How do I recover a window that has gone off the screen ?

The upper and right hand sides of my "Adobe Elements Organizer" application window have gone permanently off my Imac screen and try as I might, I can't drag or minimize this window to centre it on my desktop as a much smaller size and thereby recover control of it.    The missing window top contains some commands I can't access and so does the missing right hand side of the application window. Have tried junking app prefs, turning off Spaces, starting and restarting the computer.   Problem does not occur in other accounts using the same app - so something is screwed up with this app's window size defaults or settings or prefs in my user account only.
anyone have any suggestions?
Deleting all the "com.adobe.elements organizer.plist" files does NOT cure my problem.   I suspect it has something to do with Mavericks' poorly tested 'multiple displays' feature -- that likely has some bugs in it.   This app window seems to think it's on a much bigger monitor than my 21.5" Imac.'   short of removing and reinstalling the app itself or getting a windows machine, I can think of nothing else to do.

Not sure I follow what you mean: When I open Mission Control, the entire troubled application window is then (hurrah !!!) visible on the Mission Control "Overview" screen - but when I c\olick in that app and I am returned to the normal operating screen, it's all cut off again. It will not let me click and hold and then drag on its lower black border; I can only resize it in the direction that pushes it further off the screen.
This app's main window remains stubbornly frozen in position - up at, and extending right off of, the top right of my screen and it does not respond to normal dragging - normal attempts to pull it down and see the lower right corner so I can resize the window by dragging its corner inward diagonally.
Can you describe what you want me to try in different words. By invoking I assume you mean opening mission control.   That I am doing and that's the only way I can see the whole window looming quite normal.   But it won;t render for me that normal way on a normal operating screen.

MacBook Pro Display (window) shifts off the screen when I move my mouse

With a slight move with my magic mouse, my entire open window will shift completely off the screen with only a part of the window still visible. I have to click on the exposed edge of the window for it to shift back into place. It's only the window of the program that I have open that moves. The dock and the desktop image stays in place. I'm using an HP external monitor now but it was doing this before I hooked up the monitor. I've tried maximizing and minimizing my window but that does not seem to have an effect. Could it be the magic mouse? Thanks in advance for any help.

Wow. The power of Google is truly amazing. Just a little while ago, my husband was going nuts with our computer. I googled the words 'when I move my mouse to the left, the screen moves to the right'. And, Eureka! What do you think was the first thing that popped up on Google?
Well, the answer to my question, of course!:P Which led me right to here. It may not have been me that asked the question, but this did answer MY question!
Apparently this applies to Leopard too. Thanks alot!
Message was edited by: Linda Schodowsky

Hi i am have had a lot of trouble emptying my trash. when i go to put something in there it asks from my password and the item goes off the screen, but this does not clear any space on the hard drive.

Hi i am have had a lot of trouble emptying my trash. when i go to put something in there it asks from my password and the item goes off the screen, but this does not clear any space on the hard drive.

1. Triple-click the line below to select it:
~/.Trash
2. Right-click or control-click the highlighted line and select
Services ▹ Show Info
from the contextual menu. An Info dialog should open.
3. The dialog should show "You can read and write" in the Sharing & Permissions section. If that's not what it shows, click the padlock icon in the lower right corner of the window and enter your password when prompted. Use the plus- and minus-sign buttons to give yourself Read & Write access and "everyone" No Access. Delete any other entries in the access list.
4. In the General section, uncheck the box marked Locked if it's checked.
5. From the action menu (gear icon) at the bottom of the dialog, select Apply to enclosed items and confirm.
6. Close the Info window and test.

Reader XI has the print button off the screen when on 800x600 resolution

Reader XI has the print button off the screen when on 800x600 resolution as well, how to fix without changing resolution? A user needs the resolution set to that for her eyes.
I see that this was an issue in Reader X and update 10.1.3 resolved it. What was the fix?

The scrollbar appears and works but unfortunately the dialog size is still too big therefore the print button ends up being hidden by the windows taskbar. Could you please make sure that the print dialog size is calculated against the work area (desktop size minus the taskbar, there's a win32 API to get that) rather than the whole desktop to fix the issue?
That would also fix another issue: when the taskbar is sized higher than usual whatever the resolution you have it could still end up covering the print buttons but if you calculate against the work area rather than the desktop area that issue would be fixed as well.
Please don't leave it unfixed because even if the requirements say 1024x768 if you have higher DPI settings or have a taskbar with a non-default size the print button could easily become unreacheable.

Menu opens off the screen vertically?

I have a component and a button on top of the component which
opens a Menu. For some reason the flex team coded the menu so it
adjusts itself horizontally so it doesn't go off the screen from
left to right but not vertically from top to bottom. So if you open
a menu at the bottom of the screen the menu and submenu items will
run off the screen. Does anyone have a fix for this screw up? Flash
had a similar problem with their menus but seem to have fixed the
horizontal issue. I've seen several blogs but no solution so if
anyone can help I would appreciate it...

Ok, it could be two other things.
The monitor resolution could have changed. Go to System Preferences > Displays > Display tab > scroll this list of resolutions down and choose the bottom most resolution.
If that doesn't help you could have another monitor attached to extend the desktop. An additional tab (arrangement) will be present in System Preferences > Displays if that's the case.
Physically disconnect anything plugged into the mini displayport. The desktop should reset to one non-extended desktop.
Regards,
Captfred

IPhone 4s 'ringer' icon stays on the screen and i can't get rid of it..?

Hi, I have the new iPhone 4s but am finding that the mute o'ringer' icon stays on the screen and i can't get rid of it..! Which means it overshadows anything you are doing. Any ideas how to get rid of it? I have tried holding on/off and home button but it still does it... Thank you in advance.

I don't know if anyone else has this problem: iphone ringer icon stays on
I backed my phone up then did a complete reset on iTunes and its working fine now hope it helps someone

My itouch won't turn on. All that shows is the apple icon and then the screen goes blue to white. Is there a way to fix this or is my itouch unfixable? HELP ME!!!

My itouch won't turn on. All that shows is the apple icon and then the screen goes blue to white. Is there a way to fix this or is my itouch unfixable? HELP ME!!!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Software window slid off the screen - can no longer access this software

I cannot acces my Filemaker Pro database.
When I open the database, the window has slid off the screen, only the bottom is visible.
I cannot pull it back on the desktop, I cannot see the fields.
How can I get it back on the desktop?
Comments appreciated.

Here is the area of the desktop where it is.
I also tried the "assign to" desktop trick, but "assign to" is grayed out.

Desktop icons go off the screen

Similar Messages

Maybe you are looking for