Desperately need BizSpark help, received no response from support email after several days

I emailed [email protected] on 02/25 and still have not received a response.  Where can I post questions?  Here is the original email:
Hello, I recently started working for a new company. My previous company was a BizSpark graduate. I loved the program, so thought I would apply for it again at my new company. I went through the signup process
using my existing MS account (redacted). At no point did it indicate I was doing anything other than filling out a new application. When I finished, it went to my old bizspark page, but all the company information was changed (except for the logo)! Not only
is that terrible, because now it appears as though my new company is a BizSpark graduate, but I still want to try to enroll my new company in the program!
Please advise!
I have since edited everything except my company name because I cannot find a way to change it.

Scott, I dont deal directly with the BizSpark program, but I've reached out to a few people internally who I think do.  I'll let you know what I hear back, and maybe we can get your email replied to.
Thanks,
Mike
MSDN and TechNet Subscriptions Support
Did Microsoft call you out of the blue about your computer?
No, they didn't.

Similar Messages

  • Hi, I recently got the iPhone 6, a bit of mucking around with iMessage, over it to be honest. When i message from my macbook air my recipients receive my message from my email. HELP! it never used to do this. its so annoyingly frustrating.

    Hi, I recently got the iPhone 6, a bit of mucking around with iMessage, over it to be honest. When i message from my macbook air my recipients receive my message from my email. HELP! it never used to do this. its so annoyingly frustrating.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode.)

  • I've applied for my free copy of mountain lion but have received no response from apple. What do I do?

    I haver received no response from apple. I applied 2 days ago.

    I've been waiting since yesterday morning... Haven't heard a single thing. I called AppleCare and was told it would be up to 24 horus, which has well since passed.

  • App testing phase: Push notifications are not getting delivered to certain devices (iphone 4S/ios7.0.4 and ios7.0.3 - Push never worked for these two devices for this app). Received OK responses from Apple PUSH services, but notifications not delivered

    We are testing an app at work and Push notifications are not getting delivered to certain devices (iphone 4S/ios7.0.4 and ios7.0.3 - Push never worked for these two devices for this app). Received OK responses from Apple PUSH services, but notifications not delivered to these tow devices.
    PUSH notification were delivered to some of the other iOS devices: (iPhone5 / iOS 6.1.4 and iPhone5 / iOS 7.0.3)

    Sounds like you have a battry issue but don't want to believe it.
    If a car was running fine on one tank of gas, then you filled it up with another tank of gas and it began to run funny, one might suspect that tank of gas. But let's just say coincidence blew a valve-- would you think the new tank of gas was the culprit?
    BUT WAIT!! It just might have been! The gas could have been of higher octane and put more more strain on the valves; you know, like going from 87 octane (OS6) to 93 octane (OS7) and showing you the engine was on the edge of compromise.
    Sometimes you have to go with common sense. If everything else is ruled out, it must be the battery. And if it runs fine one moment in OS6 but immediately ***** in OS7, I'd believe my battery was suspect-- though comfy-- in OS6 but the OS7 showed its true power.
    Moreover, if you had the answer-- or didn't want to believe someone's more competent advice-- why did you even call?  You've already shown that you don't know much when you asked if you could go backwards after setting up the new OS as a new phone.
    Additonally, if you're such the know-it-all, but yourself the $29 battery and put it in yourself. It's a piece of cake.
    <Edited By Host>

  • HT3939 i purchased iphone 5c from ebay india . after 35 days i updated software n from that day phone battry is not workin well , getting dry in 4 hrs . i m reaaly ****** with phone performace , please help or suggest

    i purchased iphone 5c from ebay india . after 35 days i updated software n from that day phone battry is not workin well , getting dry in 4 hrs . i m reaaly ****** with phone performace , please help or suggest

    Ebay is not an official reseller.  Return it if you can for a refund.
    Basic troubleshooting from the Users Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • Allowing only one response from each emailed form.

    I am interested in creating a survey/voting scenario and allowing people to submit their responses including their vote.  My issue is that as the program stands now a person could actually fill out their form multiple times and submit multiple votes.  Is there a way to limit the responses from each emailed form to one?
    Thanks

    This was answered here: http://forums.adobe.com/thread/1109120?tstart=0

  • No response from support?

    I've repeatedly called and emailed for weeks trying to get an s-user login for the new closed off support site, which apparently we can't get help without.  Aside from one email asking for more info on us, which I happily replied with, I've been met with complete silence (hold music notwithstanding).
    If no one will answer an email or pick up the phone, then I'm at a loss where to go from here.
    What does it take to get support from SAP?

    Hi Allyn,
    We sincerly apologize for the delay in getting your account setup with us.
    Below I have provided the numbers and e-mail address where you can reach out to, to get the S-User Id.
    Contact information for Business Objects # new support telephone numbers, all numbers available 24 hours 7 days a week.
    America
    Cust. Interaction Contact information 
    T: 1866 8907686 (toll-free)
    T: +54 11 5129 3717   
    E: support.bosapamerica @ sap.com
    Canada
    T: 1866 6603577 (toll-free) 
    T: +54 11 5129 3717    
    E: support.bosapamerica @ sap.com
    (Please remove the extra spaces in the e-mail address)
    If the telephone number listed above is not available for your Customer Interaction Center, call the following number:
    +49-6227-744969  (available worldwide)
    Please let us know if this helps.
    Regards,
    Abhishek.

  • Help needed to resolve Received HTTP response code 401 : Unauthorized

    2011-04-08 11:37:48 Error Transmitting the message to endpoint http:---/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 401 : Unauthorized
    while i was executing file to file scenario. the error occoured.
    Edited by: subbuk76 on Apr 8, 2011 8:12 AM

    As the error indicates, the username/PWD you are using in file adapter to write the file (FTP) at target location is incorrect and hence the error. Please check and let us know.
    3) Error: HTTP_RESP_STATUS_CODE_NOT_OK 401 Unauthorized
    Description: The request requires user authentication
    Possible Tips:
    u2022 Check XIAPPLUSER is having this Role -SAP_XI_APPL_SERV_USER
    u2022 If the error is in Adapter Engine
    u2013then have a look into SAP note- 821026, Delete the Adapter Engine cache in transaction SXI_CACHE Goto --> Cache.
    u2022 May be wrong password for user XIISUSER
    u2022 May be wrong password for user XIAFUSER
    u2013 for this Check the Exchange Profile and transaction SU01, try to reset the password -Restart the J2EE Engine to activate changes in the Exchange Profile After doing this, you can restart the message
    Also, for HTTP errors in future do refer this blog:
    /people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
    It will help you

  • Empty box received, no response from seller, claim opened, paypal says to send item back

    Item is a 30" lawnmower blade and by the looks of the box it slipped out of the bottom during shipment.  I called seller initially and he said they would send another and file a claim with the carrier.  I waited about 2 weeks and still no item so I left voicemails over the course of a couple days, also emailed the seller with no response. I opened claim with paypal and they said they ruled in my favor, but need tracking info showing that I sent the item back to the seller.  Do I really need to pay more $ and spend more time shipping an empty box?  This does not make sense and it has been a month (6/19) since I paid for the item. I have tried calling paypal and there is a series of 5-6 advertisements, then it says to call a different number which goes to a completely different company for phone/internet service. I emailed paypal about this and got a generic response with links to some FAQs.   What would you do?

    That's all terrible. Just for clarification, this is a peer to peer forum. I am guessing that you posted this here to have others be aware of this. You most likely won't get a response from a VZW rep here and if you do it may not be fruitful.
    I can also tell you that a store rep doesn't have the ability to change the shipping address unless it is done at the time of the order. It is correct that to change the shipping address the tracking number has to be generated and then VZW has to fill out a form with FedEx and that could delay the package by up to 48 hours. I don't know how you received 2 packages BUT when VZW sends a device they make a note of the ESN on your account with the package's tracking number. If, in deed, their records indicate that 2 devices were sent they can easily rectify this situation. How? It is simple.
    1.) Take note of the ESN on your current device. Take the battery out and it is on the sticker. It will most likely begin with 99.
    2.) Call them. I know that you don't want to do this but insist that they look through the notes and confirm the ESNs that were sent to determine which one is on your account and which one is the missing one.
    3.) Have them input the ESN in to the system and see if it is activated on another account. If it is, they won't tell you who has it but they should easily see that it isn't you.
    This can also be done in a corporate VZW store. Not that you'd want to but if the store that Brian works at is one, I would go back there.
    Hope this information helps you start to get to the bottom of this. It shouldn't be on us to do any legwork but we have to be proactive when it comes to our money.

  • Help: Received HTTP response code 404 : Not Found

    Transmitting the message to endpoint http://chmsxd42:52200/sap/xi/engine?type=entry using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 404 : Not Found.
    Our senario is a simple file transfer one, no object has been created in IR.
    While we run the wizard, we just put the dummy interface name and namespace in the interface and namespace blanks.
    After we activate the objects, the source files were picked up and deleted but there is no file created in the target directory, and we got the error message listed at the top.
    Does anyone has some clue about this? Please help.
    Thanks a lot.
    Aditya Babu

    Hi,
    The port of Integration Engine is 80XX, and so 8001.
    In the SLD you must to select the Business System of XI and there you can just set the corret Pipeline URL.
    It means you AE is unable to communicate with IE.
    t-code SMICM..check the HTTP port No:
    open the SMICM code...just right click anywhere in the window...then click on the Services..it will show u the HTTP and HTTPs port no.
    THen from SLD --Business Landscape --your Business System..chek the Pipeline URL http://<host>:<port>/sap/xi/engine?type=entry
    the HTTP port that u will see in the SMICM should be same in the pipeline URL
    Have you checked this one,...
    /people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
    Go through this link which as the information of all HTTP errors in XI
    /people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
    Thanks
    Vikranth

  • Cant send data to nike cause i tunes received unexpected response from server

    my workout can not be sent to nike+ because i tunes received an unexpected response from server

    Hi,
    From
    this documentation, though SharePoint 2013 supports several commonly used web browsers including Apple Safari (latest released version), it is not guarantee
    that SharePoint 2013 can run perfectly on all these browsers, “certain web browsers could cause some SharePoint 2013 functionality to be downgraded, limited, or available only through alternative steps”.
    According to the code provided, it seems more relate to ASP.NET, therefore, a suggestion is that you can open a thread in ASP.NET forum, communities there will be more familiar
    with this issue:
    http://forums.asp.net/
    Thanks
    Patrick Liang
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Patrick Liang
    TechNet Community Support

  • I desperately need to UNINSTALL adobe reader XI from my Mac OSX, does anyone know how?

    I have installed Adobe Reader XI and I have found it will force other (main) programs to crash. I desperately need to uninstall it from my Mac osx. Does anyone know how to do this? It does not have an uninstall function and adobe customer help don't know what I can do.

    hello
    i have exactely the same problem than Photoguru76
    i have removed the 2 plugin AdobePDFViewer.plugin and AdobePDFViewerNPAPI.plugin
    but i have a black page when i want to open a pdf from internet
    what can i do to really uninsatll AR
    thank you for your help

  • Why is it taking over 10min. to receive a response from the direction "Contact Us"?

    ON 2/5/13 I received a reply from Tyler Downer containing three links to use to download
    updates. The link to update Flash Player 11.5 has expired. What is the comparable link
    for Flash Player 11.6?
    I also need a link to update my Adobe Reader which will not download anything on-line.

    Where did you click "Contact Us"??
    Adobe software now has updaters built in. Try the following:
    * Windows Control Panel > Flash Player > Advanced tab > "Check Now" button
    * Adobe Reader (10 or 11) > Help > Check for Updates...
    Or you can download from their sites:
    * http://get2.adobe.com/flashplayer/ (uncheck unwanted extras)
    * http://get.adobe.com/reader/ (uncheck unwanted extras)

  • Need SQL help in select data from 2 table..

    hi,
    i need some help here as i am new to sql statement
    I have 3 tables.
    Table1 :- TeamID, Team_Name, Team_Logo
    Table2:- TeamID, PlayerID
    Table3:- PlayerID, Player_Name
    How do i do a single select statement that select all information from table1 and the count of playerID from table2?
    My MS access table has relationships.
    One team can have many players. So how do it get the numbers of player in my team?
    Thanks.

    Thanks.
    but may i know why i have to max (a.team_name)???Actually there is no need of max() here, but it must be an aggregate function to use in this context. There is no harm in using it like this. This is a work around, I didn't get enough time to work on it.
    But as long as it gives correct result, don't worry about it.
    btw, how do i assign duke $$ to u?
    i am new to this forum.You can read at http://forum.java.sun.com/rewardFaq.jsp#assign
    Have a nice weekend.
    Sudha

  • Why hasn't my problem from 10/26 received a response from Apple tech support as of a month later?

    Back on 10/26, I began a discussion about an iPhone iOS 7 glitch which was an issue for my work.  It has been a month and there has been no response from anybody representing Apple.  Are Apple Support Communities merely manned by non-staff, volunteer effort or has some staffer missed my post?  Could someone from Apple Support in the iPhone department please answer my post from 10/26?  Our campus of nearly all Apple products of which I am in charge is at the end of our campus-wide AT&T phone contracts.  It's getting pretty hard to convince our board that Apple is "the way to go" when the user-focused philosophy is waning so significantly that it's led to constantly increasing IT time & $$.  If you want a more detailed list of issues we've got concerns about check out my follow-up reply to the post https://discussions.apple.com/message/23530965#23530965 shown in my image below.  I'd love to ask about those issues, too, but Apple Support Communities won't even respond to a mere iOS7 phone glitch post.  I'm disappointed.  Apple has been phenomonal in the past and we've been very appreciative.  Please help me and give me some relief as I fight the board to keep our organization Apple-based.

    Apple will not respond, as this site is indeed supported by other Apple product users. To comment to Apple directly use the link below.
    http://www.apple.com/feedback/

Maybe you are looking for