Determining Current Month Yr 0CALMONTH automatically in Input Ready Query

Hi,
Is there a standard way of Determining 0CALMONTH in an Input ready query so that when the user enters a line into the Infocube the current Month is stored into the 0CALMONTH field.
Regards,
Arun

Hi.
You can achive this by using characteristics relationship.
Plz refer following [link|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/f0e3df0c-c370-2910-a696-96f5f38574d7&overridelayout=true].
Regards.

Similar Messages

How to set input ready query to display mode as default when open workbook?

Dear All,
Hi, i have a question here about IP query.
as my current situation, my workbook included one input ready query, therefore, when i open my workbook which default is Edit mode which mean all value can be edited.
but, i want it to display mode when open workbook, and i already have a edit button, if i want to edit the value i will use Edit button, so, i wan it as display mode when i first open workbook.
so, can anyone tell me how to set it as display mode when open workbook which included input ready query?
Regards
wenlong
Thanks a million

in Data Provide Specfici commad
Edit
Dsiplay
Filter command
Assigen Query /Query view
pls select Edit then save

Data from an Input ready query back into BW

Hi All,
One of the reports I am working on should allow users to write comments for each characteristic value (i.e in each row). I have toyed with different ways of doing it, but based on our company specific requirements, I have finally arrived at this design - Users enter comments in a column in an input ready query and the data is sent back to a real time cube.
However, I have never done this kind of stuff before. Can anyone please give me a step by step procedure of how to achieve this?
The most informative answer will be rewarded with the highest points.
Thank you.

I had already tried the document property in BI, but unfortunately it did not seem to work. This is the error I got when I did a right click on a characteristic value -> Documents -> Create new comment
u201CCannot determine the KM folder for storing documents with these types of propertiesu201D
u201CError while launching new document dialogu201D
http://img184.imageshack.us/img184/6505/docproperror1wg8.jpg
When I asked my basis team about this error, they had no clue what it meant and they thought it had to do with KM, and currently we do not have KM enabled in BI portal. Thats the reason why I had look for an alternative. However, I am pretty sure its not a KM issue because I believe "Characteristic is a Document Property" is a standard out-of-box BI property.
Do you know what that means and how to fix it?

BI IP input ready query not working

Hello,
I have created an input ready query on a aggregation level and am trying to create a planing application using analyzer.
However the query is not opening in inout ready mode at all. I have checked the setting in Querry design and it is ready for input.
Please help.
Regards,
Vijay

Hello,
I think problem with the buffer. I have two option for you. Please check it and let me know if you need any further help.
1) Check the notes 1136163, 1138864, 1146957, 1179076.
In case of no other solution, You can use program RSR_GEN_DIRECT_ALL_QUERIES with proper variant for query generation. You can automate this process using a process chain.
2)please check the below;
Delta buffer query in RSRT for BI-IP ("<infoprovider>/!!1<infoprovider>)
Planning query donu2019t show the current data
Thanks.
With regards,
Anand

Unit Conversion in Input Ready Query

Hi Experts,
I need to do unit conversion in Input ready query. here is the requirement.
I have 3 columns in report, 'Year to Last Month', 'This Month' and 'YTD'. In this, 'This Month' is input ready. and YTD is sum of the first two collumns. I have a variables 'This Month' and 'Unit'. User may enter units either in Litres and HectoLitres. depends on the user input, i should get the values converted to corresponding units.
currently, if i use Litres, i am able to get the result in Litres, when i select in HectoLitres, i should be able to convert the values in HL. please let me know if this possible and how.
Thanks in advance!
Best Regards,
Ali.

Hi,
You can try unit conversion planning function,create planning function and add it at the back of button.
Can refer to link below:-
Not sure if it can solve your problem.As it also depends upon source and target keyfigure used.
http://help.sap.com/saphelp_nw70/helpdata/en/44/21643cedf8648ee10000000a1553f7/content.htm

Input ready query and Circular reference formula

Hello Everyone,
I have a situation whereby I have to calculate following:
Current Salary Merit Inc % Merit Inc Amount
(user entry)      (user entry) (user entry)
10,000             10%            1,000
While users are planning to enter above using Input ready query, if Merit Increase   % is entered formula should calculate the Merit Inc amount but if Merit Inc Amount is entered then it should also calculate Merit Inc % automatically.
Is this kind of calculation possible? I can calculate either Merit % based on Merit Amount or Merit Amount based on % but cannot dynamically calculate both the values based on user's choice of entry.
Any suggestions.
Regards,
Sachin

Ragav,
My example can be somewhat similar, which only works one way which means it calculates merit percentage based on amount entered, but if I try to change Merit % Merit amount is not changing because of missing fox code which I am not able to formulate.:
Operand display      {Key Figure Name,Posting period}
DATA PERIOD TYPE 0FISCPER3.
DATA MERPER TYPE I.
DATA MERAMT TYPE I.
Key figure ZCURRSAL represents base salary
Key figure ZMERITPCT represents Merit %
Key figure ZMERITAMT represents Merit amount.
*MERPER = {ZMERITPCT,#}.
*MERAMT = {ZMERITAMT,#}.
IF {ZMERITAMT,#} = 0.
{ZMERITAMT,#} = {ZCURRSAL,#} * {ZMERITPCT,#}/100.
ELSE.
{ZMERITPCT,#} = {ZMERITAMT,#}/{ZCURRSAL,#}*100 .
ENDIF.
Alternative one which I was trying with no luck was:
IF MERPER > 0.
*MERAMT = 0.
{ZMERITAMT,#} = {ZCURRSAL,#} * MERPER/100.
ENDIF.
IF MERAMT > 0.
*MERPER = 0.
{ZMERITPCT,#} = { ZMERITAMT,#}/{ZCURRSAL,#}*100 .
ENDIF.
Thanks,
Sachin

Input-ready query; Layout dependant on variable value

Hello,
I need to create an input-ready query where I have months Jan-Dec in colums. If the planner gives a variable value for the planning period for example April, he should get a layout where he can plan for April-Dec and view the values for Jan-March. How can I create this kind of input-ready-query? Thanks in advance. Points will be assigned.
Regards,
Marika

Hi Marika,
Step1: You need to create a variable (with user restriction), you can provide fixed values for all months of the year, perhaps on 0CALMONTH. You will get the text displayed when you select the month number in the planning folder where u use it. Say WM1 is the name you gave.
Step2: Create 2 exit variables. 1st one would check the entry by the user from WM1. If the period is > January, store all the months starting from January to the month preceeding to one selected in WM1. Set this as WM2.
In the second exit variable, the code must check for which month user has selected to start planning from and store all months starting from and ending December in it. Set this as WM3. You will have to create these 2 variables on 0CALMONTH again.
Step3: Now, in the Layout builder, 1st screen, for the additional settings, in the data columns tab, select 0CALMONTH for dynamic.
Step4: In the second screen of Layout builder, create 2 rows for the data column settings. First row would be set for comparison. Check dynamic box. Assign WM2 as the variable for 0CALMONTH here.
Second row would be for planning, but check dynamic box here again and assign WM3 as the variable for 0CALMONTH here.
You must be having WM1 as the variable in header.
In the 3rd screen you will find just 2 data columns displayed.
When you run the layout, user prompt will insist you input the desired month and layout on further opening, will bring in the desired data as you require from the Cube.
I hope you have ur actuals and plan data both in the same cube. Else you have to assign separate cubes for plng area in comparison and plan settings in the 2nd screen of builder.
Hope this will help solve ur problem.
Regards,
Aby

Can we display comments row for row in Input Ready Query...

Dear All,
Currently I have created Web template with Signle Document. When executed it in the Portal it will come up with a "Save" and "Cancel" button of its own and can allowing me to capture comment here & Finally Click on SAVE button which was stored in Documents area in RSA1.
Now I am was trying to figure out to display comments Row for Row in Input Ready Query...
Can you give ideas on this...

Check link http://help.sap.com/saphelp_nw04/helpdata/en/1e/99ea3bd7896f58e10000000a11402f/frameset.htm
In query properties in BEx query designer you have to do settings to - Display document links
For metadata, master data, and InfoProvider data for a query, you can display links to Documents that you have created for these objects. If documents exist for these objects, the symbol appears next to these objects. If you click on this symbol, you jump to where the document is displayed on the Web.
Highlight the appropriate setting so that the document links for the desired document class are displayed. The document classes are oriented to the various categories of BW objects. InfoProvider data, metadata and master data.

How to get Input-Ready Cell Value of Input Ready Query?

Hi,
How to get input ready cell value in fox formula?
for example :
In Input-Ready Query,
C_Code Month Psale(input ready)
1000 05.2012 800
now i want Psale 800 in fox formua before value save in cube,
is it possible?
Thanks
Ravi

Hi,
as I understand your requirement: you want to execute a planning function before 'save'. This possible, cf. note 1356805
for more details.
Regards,
Gregor

How to allow users to record new lines in an input ready query?

Dear All,
I am using BI integrated planning (NW2004s) and I would like to create an input ready query with account numbers in the rows. I drag 0ACCOUNT into the line field in the BEx Analyzer which has many individual values in the relevant filter.
I do not want to show all possible account values in the rows automatically (there are too many accounts) but I would like if the user write the desired account numbers by hand or select them from a list of possible values.
In summary, I would like to create a solution similar to a BPS Layout where the characteristic combinations are 'From Transaction Data'.
Is it possible to create an input ready qurey in such a way?
Thanks in Advance,
Dezso

Hi Dezso,
Yes,
If you want the query to work like a "from transaction data" layout. Goto the extended tab on the charicteristic 0account and change the setting under "Access type for result values" to "Posted values" Then only lines with posted values will appear.
M.

Syntax error when creating input-ready query

Hi,
When creating an input-ready query, I set the key-figure to 'Data can be changed by user entries or Planning Functions' in the Planning Properties in the query designer.
When I execute the query, I get the following error:
Syntax Error in : CL_RSR_RRK0_KEYFIGURE
In se24, the class has a syntax error in its Constructor method.
The error is not occuring when I change the Planning property to 'Data Cannot be changed' or 'Data can be changed via Planning Functions'.
Has anyone encountered such an error. If yes, how to proceed further?
Anything do with the the ABAP Patches. Currently I am in Patch13.
Thanks,
Balaji

Hi,
Plz apply the notes 1042924 and 1043103.After appling the notes regenerate the
query.
This should solve the error.
Regards,
Srikanth.

How can I do this input help in the Input ready query

Dear all,
Do you konw this function?
The following steps is that:
1,I create the Input ready Query.
2,I can insert the new record.
3,I can use the input help for the characteristics.
4,When I double the space, I got the pop-up for input help.
5,I want to get the function is that:
for example:
char1 is the char2 attribute.
char2 - - - - - - - -- - char1
m- - - - - -- -- - - - -a
n-- - - - -- - - - - - a
u- - - - -- - - - - - - -a
v- - - - - - - - - - - -b
w- - - - - - - -- - - -b
x- - - - - - - - - - - - b
when I write the "a" for the char1 in the new record at input ready query, I only want to got "m","n","u" for char2 from the char2 input help.
How can do it?
Thank you so much.
Best regards,
Leon

Hello Leon,
As you have already set char1 as an attribute of char2, what you would need to do is create an attribute variable for char2 of type exit.
Using a variable exit, you can pass the value of char1 to char2. This would then automatically restrict the selection list to "m", "n", "u" as values for char2 when you enter "a" as the value for char1.
Hope this helps.
Sunil

Error in Integradted Planning - Input Ready Query Design

Dear Gurus,
I am facing an error while designeing input ready query. I have created a query on Aggr. Level which is on Multi Provider.
I have 2 key figs. In my second key fig. I have restricted Planning Infor priovider with Plan version for version info object , Calender Year/month , and other info object of version , I have selected Variable for input.
When I am going to Planning tab of this key figure in change mode option I have selected Data Can be changed using user entries or Planning Functions. But my other options i.e. Disaggrgation and Type of Distriburtion are in the freezed state. That I can't select any of them. The system is giving Red hightlights and the highlight is showing error " Not Supported by Server"
Can you please advice me where is the problem ?
Regards,
B. Rajesh

Hi Rajesh,
This like would help you to resolve the issue
http://aiokeh.wdf.sap.corp:1080/SAPIKS2/contentShow.sap?_SCLASS=IWB_STRUCT&_SLOIO=C574D0123CD5DD44A8B271D6DADE8490&TMP_IWB_TASK=PREVIEW2&RELEASE=690&LANGUAGE=EN&_SEQNUM=253&_LOIO=4727759655EA6560E10000000A11466F&_CLASS=IWB_EXTHLP
Thanks and Regards,
Sateesh pasodi

Copy Input Ready Query Variables into Planning Sequence

Hi all,
       We have the following scenario. We developed a model using Web Template. The model has an input ready query and a Panning sequence associated with it. Both of them using the same Planning Filter that has a input variable for Profit Center (say ZPCTR). If I run this model in Portal the planning sequence automatically takes the variable given for the input ready query and the sequence runs without any problem.
       We were asked to implement the same model in BEx as the users felt more comfortable using Excel when working on this model. When we assinged the planning sequence to a button and after we run the input ready query and then click on the button to run the planning sequence, we get an error message saying "You have to enter values before you execute". The Planning sequence is not taking the values we enter for the input ready query automatically.
      I read through the forums on the same issue and saw that most of them reported about the same but could not find a conclusive answer. I tried the following options.
1) Enter the expected values in the excel in one location and gave the address in the "Command Range" of the planning sequence. Still it does not work.
2) Tried SAP suggested method as given in http://help.sap.com/saphelp_nw70/helpdata/en/45/e301089d574a88e10000000a155369/frameset.htm It also does not work
3) Couple of them suggested to use a different variable for Profit Center in the filter of Planning sequence (say ZPCTR_EXIT) and populate this variable. I wrote an exit for this variable and populated a fixed value say '100' into it. The sequence runs as expected. But I do not want use a constant, I want to store the value entered in ZPCTR into ZPCTR_EXIT.
   when I use the regular logic "LOOP AT i_t_var_range INTO var_inpiut WHERE vnam = 'ZPCTR' ", it does not work. the exit variable works if I store some constant values, not variable values.
    Can you please suggest how can I work with this. Is there any table from which I can read the profit center value the users enters into the Exit variable.
Thanks for your time,
Ram.

This error generally comes when we use some user input variable in the sequence which is not restricted in the query. Even though you are using the same filter for both planning sequence and query, check the planning functions inside the sequence which might read an user input variable which is not available in the query so that it is not appearing in the query selection screen. Like in FOX reading a variable using VARV or a variable restricted in the field for condition of planning function etc. Make sure that all the variables used in the sequence (planning functions) are kept in query restrictions if they are of type ready for user input so that they will appear in the selection screen.

Wrong cache for input-ready query

Dear Expert,
I encountered some issues about input-ready query. When I first open one input-ready query and input some plan data, I can save the data successfully. But after I saved data for the first query, if I don't re-connect the analyzer and open a new query, usually the plan data in the new query can not be saved successfully. After re-connect the analyzer, it works well. When I debug it, if I do not re-connect analyzer, I found the new query I opened still got some data which belong to the first query (Such as variable value). I guess it probably caused by some Bex cache? (It's not OLAP cache in RSCACHE, as we have disabled the cache for planning query in RSRT).
Could you please help me with this? Is there any way we can disable this kind of cache for the input-ready query? Or if we have any solution to clear this kind of cache without re-connect bex analyzer every time when I open a new input-ready query.
Thank you in advance.
Best Regards,
Fuyang

Hi Fuyang,
We are facing similar problem.
1st problem:
(1) When we run workbook that time variable values are automatically filled up.
(2) Variable values for version, year is filled up and then query output is displaying.
(3) There is no personalization or variant used. Its looks to me Values are coming from Cache.
(4) Cleared RSRCACHE and there is no cache used for this query.
(5) If we enter version = u201CZ2010u201D and Year = u201C2010u201D and after running workbook (input query) and then closing and reopening same variable values are coming. If we change version from u201CZ2010u201D to u201CZ2011u201D and run/save query and again reopening version variable values are coming again to u201CZ2010u201D.
2nd problem:
(1) We have planning sequence which is using below variables.
(2) Version, Year, Plant.
(3) Version and Year is input ready variables
(4) Plant is Userexit variable.
(5) Plant Dropdown is used.
(6)When we execute planning sequence first time without filtering plant then it is working fine. Receiving message u201C100 records read,100 records changedu201D u2013 This is working fine.
(7) When we use plant dropdown and filtering u201CABCu201D plant then planning sequence working fine and receiving message u201C20 records read, 20 records changedu201D u2013 This is working fine.
(8)When we clear drop down/filter using CMD - REMOVE FILTER which is used in button clear plant u201CABCu201D filter. u2013 This is working fine.
(9) Then we again apply planning sequence for all the records and receiving message u201C20 records read, 20 records changedu201D. This is not working. The message should come u201C100 records read,100 records changedu201D
This time plant variable has still with value u201CABCu201D and not clearing in variable cache.
We are on below BI 7 level and above application is Excel based.
SAP_ABA u2013 701-SAPKA70104
SAP_BASIS-701-SAPKB70104
SAP_BW-701-SAPKW70104
BI_CONT-701-SAPK-70403INBICONT
SAP GUI 7.1 patch 17
SAP BI BEx AddOn 7.1 patch 10 (1000)
Any help will be greatly appreciated.
Thanks in advance.

Determining Current Month Yr 0CALMONTH automatically in Input Ready Query

Similar Messages

Maybe you are looking for