Copy Input Ready Query Variables into Planning Sequence

Hi all,
       We have the following scenario. We developed a model using Web Template. The model has an input ready query and a Panning sequence associated with it. Both of them using the same Planning Filter that has a input variable for Profit Center (say ZPCTR). If I run this model in Portal the planning sequence automatically takes the variable given for the input ready query and the sequence runs without any problem.
       We were asked to implement the same model in BEx as the users felt more comfortable using Excel when working on this model. When we assinged the planning sequence to a button and after we run the input ready query and then click on the button to run the planning sequence, we get an error message saying "You have to enter values before you execute". The Planning sequence is not taking the values we enter for the input ready query automatically.
      I read through the forums on the same issue and saw that most of them reported about the same but could not find a conclusive answer. I tried the following options.
1) Enter the expected values in the excel in one location and gave the address in the "Command Range" of the planning sequence. Still it does not work.
2) Tried SAP suggested method as given in http://help.sap.com/saphelp_nw70/helpdata/en/45/e301089d574a88e10000000a155369/frameset.htm It also does not work
3) Couple of them suggested to use a different variable for Profit Center in the filter of Planning sequence (say ZPCTR_EXIT) and populate this variable. I wrote an exit for this variable and populated a fixed value say '100' into it. The sequence runs as expected. But I do not want use a constant, I want to store the value entered in ZPCTR into ZPCTR_EXIT.
   when I use the regular logic "LOOP AT i_t_var_range INTO var_inpiut WHERE vnam = 'ZPCTR' ", it does not work. the exit variable works if I store some constant values, not variable values.
    Can you please suggest how can I work with this. Is there any table from which I can read the profit center value the users enters into the Exit variable.
Thanks for your time,
Ram.

This error generally comes when we use some user input variable in the sequence which is not restricted in the query. Even though you are using the same filter for both planning sequence and query, check the planning functions inside the sequence which might read an user input variable which is not available in the query so that it is not appearing in the query selection screen. Like in FOX reading a variable using VARV or a variable restricted in the field for condition of planning function etc. Make sure that all the variables used in the sequence (planning functions) are kept in query restrictions if they are of type ready for user input so that they will appear in the selection screen.

Similar Messages

Input Ready Query, Variable read mode setting Only Values for InfoProvider

Hi,
I have a problem with Selection Variable for a BEx Query :
- I'm working with SAP BI 7.0 support package 15
- My query is an input ready query built for an "aggregation level" based on "real time infocube" (Planning);
- Characteristic, I want to filter with variable, has query property Advanced->Query Execution for Filter Value Selection = Only Values in InfoProvider
- Characteristic (info-object) has set the property: Business Explorer tab--> Query Def. Filter Value Selection as Only Values in the info-provider...
My problem is:
when I execute a query,
the Select Values for Variables screen appears
I push on the Select from List button
and Select Values For MyCharacteristic appears...
but it shows me all values in master data table of my characteristic instead of only values in the infoprovider!!!
If I build a query for the Real Time Cube it works correctly, but if the query is built for the aggregation level it doesn't work!
Could someone explain me why it doesn't work correctly?
Thanks in advanced
Fede

Thanks to Mariana Lazar
30.03.2009 - 12:30:36 CET - Risposta by SAP
Dear Fede,
Regarding the query built on aggregation level please note the following
the aggregation level is always a Virtual Provider built other
InfoProvider and hence it does not have the dimension table and hence
the F4 mode D is not supported.
Therefore when aggregation level is used in a query, F4 does not supportD-mode: 'Only Values in InfoProvider' and all master data values are
displayed in the value list.
Reference from the note
984229 F4 modes for input help as of SAP NetWeaver 2004s BI
4. Since other InfoProviders do not have a dimension table, the system
displays only posted values if you select "Only Posted Values for
Navigation". Otherwise, it displays the values from the master data
table.
Hope this should clarify your doubts. Please let me know if you have
questions else please confirm the message at your earliest convenience.
Thank you for your cooperation and kind regards,
@KR@ Mariana Lazar
Senior Support Consultant
SAP Active Global Support
Netweaver Business Warehouse

Data from an Input ready query back into BW

Hi All,
One of the reports I am working on should allow users to write comments for each characteristic value (i.e in each row). I have toyed with different ways of doing it, but based on our company specific requirements, I have finally arrived at this design - Users enter comments in a column in an input ready query and the data is sent back to a real time cube.
However, I have never done this kind of stuff before. Can anyone please give me a step by step procedure of how to achieve this?
The most informative answer will be rewarded with the highest points.
Thank you.

I had already tried the document property in BI, but unfortunately it did not seem to work. This is the error I got when I did a right click on a characteristic value -> Documents -> Create new comment
u201CCannot determine the KM folder for storing documents with these types of propertiesu201D
u201CError while launching new document dialogu201D
http://img184.imageshack.us/img184/6505/docproperror1wg8.jpg
When I asked my basis team about this error, they had no clue what it meant and they thought it had to do with KM, and currently we do not have KM enabled in BI portal. Thats the reason why I had look for an alternative. However, I am pretty sure its not a KM issue because I believe "Characteristic is a Document Property" is a standard out-of-box BI property.
Do you know what that means and how to fix it?

Issue with Input Ready Query in Integrated Planning.

Hello Everyone,
I've been working on Integrated Planning for some time now. My company recently started using a new server for this work. I find that I am unable to make the queries "input ready". Though I edited the properties of the key figure to "accept user entered values" and chose the option to "start query in change mode", when I execute the query, I find that it the values for the Key Figure cannot be changed. I tried to search in the OSS for any note(s) regarding this issue, but was unable to come up with a solution. Is the problem related to the server or is there some other configuration that I should take care of? Additionally, I would also like to know if there is any method to debug such a problem. I would appreciate it if someone could help me out in this regard.
Thanks,
Jake.

Hi,
Please verify the following.
1. Check if the underlying realtime cube is in "Planning Mode:Loading not allowed" state in rsa1
2. If you have created an aggregation level, Check if the most detailed information is available at that Aggregation Level(i.e, include characteristics so that the record can be uniquely identified at that aggregation level).Best would be to include all characteristics and create a query first and ensure it works.Then remove unwanted charecteristics one by one, so that you can fix the issue.Best thing to start with is to create the aggregation level on top the real time cube itself.
3. Check for any characteristic restrictions been defined for the real-time cubes.If so, try removing them temporarily and execute the query
4.Also check if any data slices has been created on the real time cube. If so, try removing it temporarily and then execute the query.
5. Set the property for Planning "Start query in Change Mode"- this is for th Query
6. Set the 'Key Figure' Planning Property to "Can be changed Manually or via Planning Functions" for the appropriate KeyFigures- this is for the key figures
7. Try removing the currency/unit from row/column. Try restricting them in filters rather than in row/columns.
8. Check if there are any locks occurring due to filter., i.e if you are using a filter and even if 1 record of this selection locks with another user's selection you lose the input readiness.
Mostly this should fix the issue. Assign points if this info helps you.
Thanks,
Balaji.

*****Can we make charcterstics as a Input ready in the input ready query.**

Hi experts,
Our business requirement as follows.
the existing business scenerio is, Master data ( say Product list ) )will comes from CRM , By using the input ready query , we will plan against to that master data by using IP.
But my requiment is " though the master data is not avilable( say new product came into the market which is not avilable in CRM) in the CRM end, user wants to enter the that product name directly in the input ready and also user wants to plan against that product.
As per our requirement , user wants to enter charcterstics directly in the query like entering the key figure values directly in the input ready query.
As per as my knowledge concern , this functionality is not avilable in IP.
so can you please suggest if any other work around solutions for this to fix this issue.
Thanks,
Subhratha benargeee.

Hi Subhrata,
As I said, its not possible in IP at all. If we talk technically, IP infrastructure needs SID's. Meaning it communicates through SID values.
Once you enter characteristic value in the query, the system automatically sends the SID values to OLAP when the round trip happens. There was a certain period of time, when system automatically used to create sid's if there does not exist that value in master data for the characteristic. I dont remember the exact support pack, But that was a bug and has been fixed. Its not possible in any form web, bsp or bex analyzer on OLAP write infrastructure. As long as you dont find some RFC which can write this value to the master data table of the characteristic before the OLAP is triggered.
I understand you are writing transaction data only, But OLAP works through SID's when it gets data from infoproviders. So due to the same reason without an entry into sid and master table of the characteristic there can not exist an entry in the infoprovider. OLAP simply can not communicate without SID's.
Now coming to the scenario I explained earlier, its Business Planning & Simulation. If you design your planning application on BPS, you can design web interfaces which is a BSP application can achieve what I said.
Its not the speciality of BSP(business server pages) which is making it possible, But the BPS interfaces are designed such a way that it communicates directly through master data and text table of charcteristics.
As of now, I do not have a solution for your scenario on IP, If I find or come across one I will surely let you know.
All the best.
Best regards,
ravi.

Error in Integradted Planning - Input Ready Query Design

Dear Gurus,
I am facing an error while designeing input ready query. I have created a query on Aggr. Level which is on Multi Provider.
I have 2 key figs. In my second key fig. I have restricted Planning Infor priovider with Plan version for version info object , Calender Year/month , and other info object of version , I have selected Variable for input.
When I am going to Planning tab of this key figure in change mode option I have selected Data Can be changed using user entries or Planning Functions. But my other options i.e. Disaggrgation and Type of Distriburtion are in the freezed state. That I can't select any of them. The system is giving Red hightlights and the highlight is showing error " Not Supported by Server"
Can you please advice me where is the problem ?
Regards,
B. Rajesh

Hi Rajesh,
This like would help you to resolve the issue
http://aiokeh.wdf.sap.corp:1080/SAPIKS2/contentShow.sap?_SCLASS=IWB_STRUCT&_SLOIO=C574D0123CD5DD44A8B271D6DADE8490&TMP_IWB_TASK=PREVIEW2&RELEASE=690&LANGUAGE=EN&_SEQNUM=253&_LOIO=4727759655EA6560E10000000A11466F&_CLASS=IWB_EXTHLP
Thanks and Regards,
Sateesh pasodi

Input-ready query; Layout dependant on variable value

Hello,
I need to create an input-ready query where I have months Jan-Dec in colums. If the planner gives a variable value for the planning period for example April, he should get a layout where he can plan for April-Dec and view the values for Jan-March. How can I create this kind of input-ready-query? Thanks in advance. Points will be assigned.
Regards,
Marika

Hi Marika,
Step1: You need to create a variable (with user restriction), you can provide fixed values for all months of the year, perhaps on 0CALMONTH. You will get the text displayed when you select the month number in the planning folder where u use it. Say WM1 is the name you gave.
Step2: Create 2 exit variables. 1st one would check the entry by the user from WM1. If the period is > January, store all the months starting from January to the month preceeding to one selected in WM1. Set this as WM2.
In the second exit variable, the code must check for which month user has selected to start planning from and store all months starting from and ending December in it. Set this as WM3. You will have to create these 2 variables on 0CALMONTH again.
Step3: Now, in the Layout builder, 1st screen, for the additional settings, in the data columns tab, select 0CALMONTH for dynamic.
Step4: In the second screen of Layout builder, create 2 rows for the data column settings. First row would be set for comparison. Check dynamic box. Assign WM2 as the variable for 0CALMONTH here.
Second row would be for planning, but check dynamic box here again and assign WM3 as the variable for 0CALMONTH here.
You must be having WM1 as the variable in header.
In the 3rd screen you will find just 2 data columns displayed.
When you run the layout, user prompt will insist you input the desired month and layout on further opening, will bring in the desired data as you require from the Cube.
I hope you have ur actuals and plan data both in the same cube. Else you have to assign separate cubes for plng area in comparison and plan settings in the 2nd screen of builder.
Hope this will help solve ur problem.
Regards,
Aby

Integrated Planning input ready query

Hi All,
I am new to integrated planning. I have created an input ready query with key figure "revenue" ready to input.
When I run the query, I can change the revenue figures, but the save button is greyed out.
Is this an authorization issue or am I missing something?
Any help is appreciated. Thanks!

Hello Payal,
I sugguest to read the documentation on help.sap.com about BI Planning; the documation contains an example how to create a planning application with BEx Analyzer.
I did not mention what UI you are using, BEx Analyzer oder BEx Web Analyzer. In both cases there is no default save button, you have to create it, e.g. in the design mode of BEx Analayzer oder for the BEx Web Analyzer in the WAD (Web Application Designer).
Regards,
Gregor

IP: input-ready query shows data in Load mode but not in Plan mode

Hello experts,
we're currently experiencing a very strange issue regarding an input-ready query which consists of a single lead column (read from the cube) and an input-ready plan column. The issue is as follows:
When the cube is in Load mode the lead column shows its data perfectly. However, when switching to Plan mode the data is not shown.
The cube is indexed by a BIA which may be part of the problem.
We're on BW 7.00 SP 21. I've read that this may be related to the OLAP cache, but haven't been able to find any notes relevant for 7.00 SP 21.
Thanks in advance for any suggestions.
Regards, Dirk

Hi Dirk,
I think that the problem comes from the cache used in the plan buffer query. Delete the cache via RSRCACHE. The query name is
IC/!!1IC if you have a query on an aggregation level on an InfoCube IC
MPRO/!!1MPRO if you have a query on an aggregation level on a multiprovider MPRO or directly on the multiprovider MPRO
You might search for note using 'cache' and component pattern BW-BEX-OT*, e.g. 1408959, 1528191, 1560036.
Regards,
Gregor

How to calculate and save planning data in bex input-ready query using keyfigures for calculation from different infoproviders

Hi Dear All,
We have two real time infocubes and two aggregation levels based on these cubes in one multiprovider
first cube1 is like
char1| char2| keyfig_coefficient(single value for each combination of char1 and char2)
same aggregation level1
(we have input query to fill coefficients by one responsible user)
second cube2 is like
char1| char2| keyfig_quantity| keyfig_result
same aggregation level2
Input ready query should be like (for all other users of different org units)
char1|char2|keyfig_coeff| keyfig_quant(for input) | keyfig_result = keyfig_coeff*keyfig_quant(calculated value, should be saved to cube2)
And we don't have pregenerated lines in cube2, users have to add new lines themselves by wad.
Question is, what is the optimal (easiest) way to make calculation and save result data to cube2 where keyfigures for calculation should be used from different infoproviders. I need just a hint.
Appreciate any help.
Nadya.

I found decision, agregation levels sould be based on multiprovider, not included.

Input Ready Query using Analysis grid in WAD - Integrated Planning

While running the input ready query in analyzer, I am able to key in values.
In WAD, I get the following message and there is no new row.
"No new row or column added because not all characteristics have a key cell"
Waiting for response on fly!!!
Thanks in advance,
Siva

Hi Siva,
New lines in web applications modeled by WAD only work with SP09 and note 984601.
Please assign points if this helps.
Regards,
Anil

Wrong cache for input-ready query

Dear Expert,
I encountered some issues about input-ready query. When I first open one input-ready query and input some plan data, I can save the data successfully. But after I saved data for the first query, if I don't re-connect the analyzer and open a new query, usually the plan data in the new query can not be saved successfully. After re-connect the analyzer, it works well. When I debug it, if I do not re-connect analyzer, I found the new query I opened still got some data which belong to the first query (Such as variable value). I guess it probably caused by some Bex cache? (It's not OLAP cache in RSCACHE, as we have disabled the cache for planning query in RSRT).
Could you please help me with this? Is there any way we can disable this kind of cache for the input-ready query? Or if we have any solution to clear this kind of cache without re-connect bex analyzer every time when I open a new input-ready query.
Thank you in advance.
Best Regards,
Fuyang

Hi Fuyang,
We are facing similar problem.
1st problem:
(1) When we run workbook that time variable values are automatically filled up.
(2) Variable values for version, year is filled up and then query output is displaying.
(3) There is no personalization or variant used. Its looks to me Values are coming from Cache.
(4) Cleared RSRCACHE and there is no cache used for this query.
(5) If we enter version = u201CZ2010u201D and Year = u201C2010u201D and after running workbook (input query) and then closing and reopening same variable values are coming. If we change version from u201CZ2010u201D to u201CZ2011u201D and run/save query and again reopening version variable values are coming again to u201CZ2010u201D.
2nd problem:
(1) We have planning sequence which is using below variables.
(2) Version, Year, Plant.
(3) Version and Year is input ready variables
(4) Plant is Userexit variable.
(5) Plant Dropdown is used.
(6)When we execute planning sequence first time without filtering plant then it is working fine. Receiving message u201C100 records read,100 records changedu201D u2013 This is working fine.
(7) When we use plant dropdown and filtering u201CABCu201D plant then planning sequence working fine and receiving message u201C20 records read, 20 records changedu201D u2013 This is working fine.
(8)When we clear drop down/filter using CMD - REMOVE FILTER which is used in button clear plant u201CABCu201D filter. u2013 This is working fine.
(9) Then we again apply planning sequence for all the records and receiving message u201C20 records read, 20 records changedu201D. This is not working. The message should come u201C100 records read,100 records changedu201D
This time plant variable has still with value u201CABCu201D and not clearing in variable cache.
We are on below BI 7 level and above application is Excel based.
SAP_ABA u2013 701-SAPKA70104
SAP_BASIS-701-SAPKB70104
SAP_BW-701-SAPKW70104
BI_CONT-701-SAPK-70403INBICONT
SAP GUI 7.1 patch 17
SAP BI BEx AddOn 7.1 patch 10 (1000)
Any help will be greatly appreciated.
Thanks in advance.

Input ready query with default data

hi expert
How do I make input ready query to have a default value when signing in using WAD?
thanks.

Hi,
Use the following document for your query. If found useful do grant me number!
Revaluating Planning Functions (with Analysis Web Item)
Use
You want to build a planning application with which you can enter turnover amounts for certain account numbers and revaluate them using a factor that can be set. If you select a row of the table, only the amount in this row is to be revaluated. If you do not select any rows, all values are to be revaluated. The planning application is to look roughly as follows on execution:
This example serves in particular to clarify the interaction between a planning function and an Analysis Web item. Special properties here are:
●      Variable handling in the planning function
●      Row selection in the Analysis Web item
Prerequisites
In the planning modeler, you have created an aggregation level that contains the following InfoObjects: unit Currency Key, time characteristics Quarter and Calendar Year, key figure Amount, characteristics Version, Account Number, Cost Center.
The planning function and the query are to use the same data of this aggregation level.
Procedure
Planning Modeler: Creating Planning Functions, Variables, and Filters
       1.      Choose the Planning Functions tab page and create a planning function of the type Revaluate with technical name REVALUATE and description Revaluate for your aggregation level.
       2.      On the To the Parameters tab page, use the input help for the revaluation factor to create the REVAL_FACTOR variable with the Revaluation Factor description. The variable is to be specified in detail as follows: The variable is to be a required variable and is to be input ready; it is to be of type Number, but is not to contain a standard default value.
       3.      Choose the Filter tab page and create a filter with technical name ACCOUNT_FILT and description Revaluation Selection for your aggregation level.
Select the characteristics one after another and choose the input help icon in the column after Characteristic Restrictions. The dialog box for specifying characteristic restriction appears. Specify the required restrictions (in our example, Version = VERSION 1, Quarter = QUARTER 1, Calendar Year = 2007; Cost Center = 100002, Currency = Euro; for Account Number, all values are taken over), choose Add, and save the selections by clicking OK.
Choose Show Extended Settings and ensure that the Version characteristic cannot be changed on execution. (It must be possible to change the Amount key figure).
More information about creating planning functions, variables, and filters: Modeling Planning Scenarios
BEx Query Designer: Creating Queries
       1.      In the BEx Query Designer, create a query Revaluate (technical name: QUERY_REVALUATION) for your aggregation level.
       2.      Drag and drop the ACCOUNT_FILT filter into the Characteristic Restrictions area for filter values. In doing so, all characteristics are restricted to single values.
Drag and drop the Account Number characteristic into the area for default values.
       3.      Specify that the Account Number characteristic is in the rows. The values for this come from the master data.
Specify that the Amount key figure is in the columns. The values for this can be changed; on the Planning tab page, choose the Data Can be Changed Using User Input or Planning Functions option.
       4.      Save your query definition.
BEx Web Application Designer: Creating Web Templates
       1.      In the BEx Web Application Designer, create a Web template with technical name REVALUATION.
       2.      Create the following data providers:
○       DP_PLAN_DATA of the type Query View Data Provider, based on query QUERY_REVALUATION
○       DP_FILT_REVALUATION_FUNCTION of the type Filter. The data binding should come from the ACCOUNT_FILT filter.
       3.      Create the following Web items:
○       INPUT_FIELD_REVALUATION_FACTOR. Specify 10 as the default value (Internal Display ® Text: 10).
○       BUTTON_GROUP_ REVALUATION. Using Internal Display, create pushbutton1 with label Revaluation and, as Action, use the command wizard to assign the following commands (INSTRUCTION):
Table of Commands
Command
Parameters
Data provider-specific command: SET_SELECTION_STATE BY BINDING (Set Filter Values According to Different Sources)
●      Command target: target data provider DP_FILT_REVALUATION_FUNCTION
●      Data binding: selection binding using the Account Number (ZD_ACCNT) characteristic, where the value of the Web Item Selection binding type is to come from the ANALYSIS_ITEM_1 Web item, characteristic Account Number (ZD_ACCNT).
Planning-specific command EXEC_PLANNING_FUNCTION_SIMPLE (Execute Planning Function )
●      Data binding: Reference to data providers of type Filter DP_FILT_REVALUATE_FUNCTION, where the value from variable REVAL_FACTOR of connection type Web Item with Manual Input (ITEM_INPUT) is to come from INPUT_FIELD_REVALUATION_FACTOR.
●      Command-specific parameter: planning function REVALUATE
○       ANALYSIS_ITEM_1. Data provider DP_PLAN_DATA is assigned to the analysis grid as the (source) data provider.
Choose Behavior ® Row Selection ® Multiple (MULTIPLE).
In this case, it must be possible to select multiple rows and to execute the revaluation command on all selected rows. It is not therefore possible to give the command along with the row selection; the command must instead be given using pushbuttons.
       4.      Create a CONTAINER_LAYOUT_ITEM_1 (Web Items ® Enhanced ® Container).
Divide the container into columns, choose the With Tray display option, and enter label Revaluation under Tray Settings.
Add the following Web items to the container:
○       1st row, 1st column: INPUT_FIELD_REVALUATION_FACTOR
1st row, 2nd column BUTTON_GROUP_ REVALUATION
○       2nd row, 1st column (with option Colspan=2, that is, with a merge of columns 1 and 2): ANALYSIS_ITEM_1
The following figure illustrates the layout of the REVALUATION Web template:
Execution on the Web
       1.      Execute the Web template on the Web.
       2.      For testing, extend the URL to include parameter &debug=X.
If you have set this parameter, the selection is shown in the Executing Planning Function section.
       3.      Enter amounts for one or more account numbers, change the revaluation factor if necessary (default value = 10), select the required rows, and choose Revaluation.
For example, enter amount 100 in the first row, retain revaluation factor 10, and choose Revaluation. The query outputs an amount of 110 in both the selected row as well as in the overall result (as long as you have not entered any other values).
Regards,
SUbha

How to allow users to record new lines in an input ready query?

Dear All,
I am using BI integrated planning (NW2004s) and I would like to create an input ready query with account numbers in the rows. I drag 0ACCOUNT into the line field in the BEx Analyzer which has many individual values in the relevant filter.
I do not want to show all possible account values in the rows automatically (there are too many accounts) but I would like if the user write the desired account numbers by hand or select them from a list of possible values.
In summary, I would like to create a solution similar to a BPS Layout where the characteristic combinations are 'From Transaction Data'.
Is it possible to create an input ready qurey in such a way?
Thanks in Advance,
Dezso

Hi Dezso,
Yes,
If you want the query to work like a "from transaction data" layout. Goto the extended tab on the charicteristic 0account and change the setting under "Access type for result values" to "Posted values" Then only lines with posted values will appear.
M.

Error on a input ready query

Hello SAP Gurus,
Can anybody advise on the following error of an input ready query?
u2022 Error reading the data of InfoProvider ZIPNA002 - Notification Number DBMAN 305
u2022 Error while reading data; navigation is possible - Notification Number BRAIN 289
u2022 System error in program CL_RSPLS_PLAN_DATA and form GETREQ_FREE-01- (see long text ) - Notification Number BRAIN 299
The query is based on an aggregation level (integrated planning)
The filter has a navigation attribute variable for the characteristic 0WBS_ELEMT__0PROJECT Project definition and in the line a list of 0WBS_ELEMT PEP elements should be displayed for planning.
We are with support package SAPKW70017 SAP NetWeaver BI 7.0
Thanks and best regards,
Patrícia

Hi Patrícia
first check in transaction SNOTE that there are no inconsistent notes (no lightning icons). If not, tell your basis team to fix it.
Then check in transaction SPAU that there are no inconsistent objects (everything must be green). If not, tell your basis team to fix it.
Next implement all notes that are listed as "side effects" in note SAP note 1101187 .
Finally, generate the plan query again in transaction RSRT. b
Regards,
Marc
SAP NetWeaver RIG

Copy Input Ready Query Variables into Planning Sequence

Similar Messages

Maybe you are looking for