Determining the Status of Provisioned Resources from the database

What is the best way to determine the status of a provisioned resource when looking at the OIM database?
In the USR_UDF_APPLICATION_P table I see all the fields for the resource, but not the status. What table contains the status?
Thanks in advance!
Kerry

The status of the application will be stored in "ost" table.
Following query will give u to get all the users who has provisioned to particular resource.
SELECT usr.usr_login FROM idm.ost,idm.oiu,idm.obj,idm.usr WHERE oiu.ost_key = ost.ost_key AND obj.obj_key = ost.obj_key AND oiu.usr_key = usr.usr_key and ost_status='Provisioned' and obj.obj_name='Application Name'
Where in OST status, you can give what ever status u want to find.
Let me know if you have any questions.
Thanks,
Venkatesh.

Similar Messages

Error obtained while provisioning resource to the organisation

Hi,
I have created a workflow to connect to a target and provision resource.But when i am trying to provision resource to the organisation i am getting the below error.
l
Either you do not have the appropriate permissions to complete this action or a system error has occured.
Please contact your administrator for further assistance.
logs show that one entity adapter is throwing error as its reading a OBJ_key as 0 ..why is that so
Please help.
Its urgent.
Thanks
Sk

You have an entity adapter where? Can you explain the whole process from beginning to end what happens when you submit the request?
-Kevin

Abort Could not determine a value for variable 0DAT from the authorizations

Hi All,
I encountered an error '/ Abort Could not determine a value for variable 0DAT from the authorizations\' when executing my query on a multiprovider in BW 3.5.
Can anyone help me in finding a solutionn to this issue.
Thanks,
Kartik.

Hi Kartik,
I am sorry as that note is for NW2004s. Please check if 0DAT variable installed from a business content? if not then I think thats the cause of the problem.
Hope this helps,
Bye...

Set the status of mass orders from CLSD (Business completion) to TECO

Hi All,
Can you please help me out on how to set the status of multiple orders from CLSD (Business completion) to TECO(Technical Complete) .
Regards,
Shruthi.

I'm assuming production orders, you can do that in COHV, selection criteria Sys. Status "CLSD". Click on Mass Processing button and select Technically Complete.

Including resource from the other application

          Application "Common" contains headers, footers and resources that I want to include
          in other apps. How should I formulate URL in include page directive to do that
          App Common has structure:
          Common
          /header.html
          /footer.html
          and App Custom has an jsp page
          /demo.jps
          and demo.jsp looks like
          <%@ include file="../Common/header.html" %>
          ... my content ...
          <%@ include file="../Common/footer.html" %>
          Is it possible to move outside of app (Servlet) context ?
          Thanks,
          tj


That is illegal. Include refers to a resource from the current application.
          Instead, use a URL to the resource and suck in its contents and write them
          to the response. You can create a simple tag with the resource url as the
          parameter thta does just that. Suggestion: using caching liberally for
          static resources.
          Peace,
          Cameron Purdy
          Tangosol Inc.
          << Tangosol Server: How Weblogic applications are customized >>
          << Download now from http://www.tangosol.com/download.jsp >>
          "tj" <[email protected]> wrote in message
          news:[email protected]...
          >
          > Just to clarify... (WLS6.0 sp2, Win 2000)
          > I want to include static resource from different application in my JSP
          using page
          > include directive. My question is how to specify relative URL to
          accomplish that
          > ? How to reffer to web server root ? "/" is application root, so if
          resource is
          > in the other app, "../otherapp/pathinotherapp/resource.htm" should work or
          it
          > should not, if not what is the best way to isolate common static files
          (headers,
          > footers ...) shared among all apps ?
          > (btw I think this works in webSphere)
          >
          > Thanks
          >
          > "tj" <[email protected]> wrote:
          > >
          > >Application "Common" contains headers, footers and resources that I want
          > >to include
          > >in other apps. How should I formulate URL in include page directive to
          > >do that
          > >?
          > >
          > >App Common has structure:
          > >
          > > Common
          > > /header.html
          > > /footer.html
          > >
          > >and App Custom has an jsp page
          > > /demo.jps
          > >
          > >
          > >and demo.jsp looks like
          > >
          > ><%@ include file="../Common/header.html" %>
          > >.... my content ...
          > >
          > ><%@ include file="../Common/footer.html" %>
          > >
          > >
          > >Is it possible to move outside of app (Servlet) context ?
          > >
          > >Thanks,
          > >tj
          > >
          > >
          > >
          >

CUA: One or more errors occurred while checking the status of Windows Firewall on the cluster nodes

Cluster with 2 hosts 2012 R2
Scheduled CAU fails with:
CAU run {4EFE116C-AB49-456D-8EED-F7EDC764DA49} on cluster Cluster1 failed. Error Message:One or more errors occurred while checking the status of Windows Firewall on the cluster nodes. Review the errors for more information on how to resolve the problems.
Error Code:-2146233088 Stack:   at MS.Internal.ClusterAwareUpdating.Util.<CheckFirewallsAsync>d__3a.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.ClusterAwareUpdating.Commands.InvokeCauRunCommand.<_ProcessCluster>d__78.MoveNext()
If I run CAU "Analyze Readiness" ALL comes as PASS
If I run CUA by hand on same hosts with NO change to the system (not even reboot) it finishes OK
Anybody any ideas?
Thanks
Seb

Hi,
In some case if you disabled the connection in Windows firewall inbound of
"Cluster aware updating" service it will can’t use the CAU.
More information:
Starting with Cluster-Aware Updating: Self-Updating
http://blogs.technet.com/b/filecab/archive/2012/05/17/starting-with-cluster-aware-updating-self-updating.aspx
What is Cluster Aware Updating in Windows Server 2012? (Part 1)
http://blogs.technet.com/b/mspfe/archive/2013/02/06/what-is-cluster-aware-updating-in-windows-server-2012.aspx
Cluster-Aware Updating Overview
http://technet.microsoft.com/en-us/library/hh831694.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to make iTunes read the song's name/singer from the file's name itself?

Hi everyone,
So I have this file with songs from everywhere. I spent quite some time now to make sure that the structure of each file's name is as such : "Singer - Song name", hoping that everything would be read by iTunes accordingly. However, either iTunes read it well, or it didn't read it at all ("Singer - Song name" appearing in Title alone), or iTunes read the "media" of the file (ie. what the guy I downloaded it from wrote for it in the Preferences, which usually is in capital letters or with a bunch of weird underscores). As I'm OCD and need everything to be neat, I'm highly tensed right now. I really want everything to be neat and clear!
So, how do I make sure that iTunes reads the files' names such that it knows the structure is "Singer - Song name"? Thanks.

iTunes doesn't use file names to determine how music appears in your library, Rather, it uses metadata that is split between:
data elements that are embedded within the media files
data elements that are included in the entries in the iTunes database
No amount of reorganization, renaming or other manipulation at the file level will make any difference to how songs will appear in iTunes. Using your example:
the value of the track number element is 1
the value of the artist element is "Elvis Presley"
the value of the song name element is "Blue Suede Shoes"
Depending on how you configure iTunes then the file name is either:
completely independent of iTunes (i.,e., the file containing this song could be xyz.mp3)
dependent on the metadata managed by iTunes, (i.e., when you have these two options set:
then iTunes will set the file name to be 1-01 Blue Suede Shoes.mp3 where:
the file is in a folder called "Elvis Presley" (the name of the album)
that folder is in one called "Elvis Presley" (the name of the artist) which is in iTunes Media\Music
Going back to your question "How to make iTunes read the song's name/singer from the file's name" the answer is simple - you can't, as this is not how iTunes works. There are some third-party utilities that you can use to set some metadata element values based on parsing of file names which might be a useful first step. However, to use iTunes effectively you should really forget about / ignore file names - manage your media using appropriate metadata and allow iTunes to look after file names behind the scenes.

How to check the status of an IDoc in the Target system

Hi Experts,
we are using a self-made program to send Material and BOMs from Client A to Client B into the same ERP System.
How can I check the status of an IDoc in the Target Client B (like BD87 - ALE Monitor) ?
If you have some examples or Function, please give me the information.
Rewards if helpful.
Regards,
David

Hi David
As mentioned in the earlier reply you can check your status with tcodes:-BD87,WE02,WE05.What i guess from your querry is the staus of your idoc whether posted or not in target client B.Check in the target client for the message type which you are using (since its an program that means you must be using an customised idoc type or standard) .You might have maintained Basic type tcode:-WE30.Give in your messagetype,Basictype,Created at and executed using tcode :- BD87.The prerequisites are you need to create an Partner Profile(WE20) .For this you need to create to provide in your message type and Process code(we41,we42,we57).If you have to create an process code for customised one(se37) .You need to actuivate the idoc inbound processing .If you are using a file in your file make it sure the port is being maintained for the same to chek for unicode format in tcode :-WE21 (check or uncheck).
For standard BOM i recon you are using message type :-BOMMAT and Processing code as:-BOMM.Its always advisible that instead of using an whole abap program you need to have an ETL tool that would take care of the extraction of data provided your client do have existing Legacy system in its place since it would be much faster and easier.
Regards
Somnath

How can I keep tabs on the file size when importing from the Event Library into a Project? I want to ensure the movie will fit onto a 4.7Gb disc?

How can I keep tabs on the file size when importing from the Event Library into a Project? I want to ensure the movie will fit onto a 4.7Gb disc?

iDVD does not care about file sizes, as it compresses the file to the standard DVD format of mpeg2.
It only cares about length i.e. max 2 hours including titles etc.
iDVD encoding settings:
http://docs.info.apple.com/article.html?path=iDVD/7.0/en/11417.html
Short version:
Best Performance is for videos of up to 60 minutes
Best Quality is for videos of up to 120 minutes
Professional Quality is also for up to 120 minutes but even higher quality (and takes much longer)
Professional Quality: The Professional Quality option uses advanced technology to encode your video, resulting in the best quality of video possible on your burned DVD. You can select this option regardless of your project’s duration (up to 2 hours of video for a single-layer disc and 4 hours for a double-layer disc). Because Professional Quality encoding is time-consuming (requiring about twice as much time to encode a project as the High Quality option, for example) choose it only if you are not concerned abo
In both cases the maximum length includes titles, transitions and effects etc. Allow about 15 minutes for these.
You can use the amount of video in your project as a rough determination of which method to choose. If your project has an hour or less of video (for a single-layer disc), choose Best Performance. If it has between 1 and 2 hours of video (for a single-layer disc), choose High Quality. If you want the best possible encoding quality for projects that are up to 2 hours (for a single-layer disc), choose Professional Quality. This option takes about twice as long as the High Quality option, so select it only if time is not an issue for you.
Use the Capacity meter in the Project Info window (choose Project > Project Info) to determine how many minutes of video your project contains.
NOTE: With the Best Performance setting, you can turn background encoding off by choosing Advanced > “Encode in Background.” The checkmark is removed to show it’s no longer selected. Turning off background encoding can help performance if your system seems sluggish.
And whilst checking these settings in iDVD Preferences, make sure that the settings for NTSC/PAL and DV/DV Widescreen are also what you want.
http://support.apple.com/kb/HT1502?viewlocale=en_US

How to get the server port and id from the Initialcontext

hi
i know that i can get the server port and id where the jndi service is listening from the InitialContext ( when i create InitialContext ic = new InitialContext(); from within a EJB. ). Does this work on any application server and where (at what position is for example the port) in the Enumeration at the ic are the different things put?

I would usually just get the PROVIDER_URL property from the InitialContext and use that to determine the location of the naming service:
String providerURL = (String)ic.getEnvironment().get(Context.PROVIDER_URL);You'll then need to parse that string to obtain the port and the server name. For example:
// Assume that the provider URL is of form "protocol://server:port"
int serverStartIndex = providerURL.indexOf("://" + 3);
int serverEndIndex = providerURL.indexOf(:, serverStartIndex);
String server = providerURL.substring(serverStartIndex, serverEndIndex);
String port = providerURL.substring(serverEndIndex + 1);It's a fairly universal approach but there'll doubtlessly be some special cases (for example, the provider URL could be null and the InitialContextFactory class defaults it).
You might have to adjust the server/port parsing stuff a bit as I just made that up and your URL might not conform to the pattern I described.
Hope this helps.

UWL: The request cannot be started from the Business Workplace?

Hi All
Please assist I am currently trying to execute the standard leave request approval within the UWL.
This is the standard leave approval screen for workflow template WS12300111.
I get the below error in a SAP ECC easy web screen.
The request cannot be started from the Business Workplace
Message no. HRTIM_ABS_REQ066
Can anyone give me any insight to this as I have made multiple changes tothe UWL config.
Regards
Maahir

BY seeing the error message I think you might have not registered the task in the Portal, as you are have mentioned easy web screen
1. When ever you are trying to execute the workitem from the UWL and you are able to See the SBWP SAP inbox in the browser then it means that the task of the workflow is not registered in the portal.
2. Please ask your portal team to register the task in UWL with corresponding visualization parameters.
[check for the parameters that are to be configured|http://help.sap.com/saphelp_nw04/helpdata/en/20/f0c82c9f6748c58d9ea14b3bbed93a/frameset.htm]
You cannot execute a leave workitem from the Inbox. if you try to execute then it prompts the error message that you have mentioned.
Try to do check all the below points.
1. Check whether the task TS12300097 is registered in the SWFVISU txn it should be using a Java Application. with the parameters
APPLICATION     LeaveRequestApprover
DYNPARAM     wi_id=${item.externalId}
PACKAGE     sap.com/ess~lea
2. Second thing is make the task as General Task from the PFTC txn. so that the agent can approve
3. Ask the portal guys to register this task in the XML file where all the application specific task's are registred. and then try to execute the workitem, this time it will show you the leave request application.

I updated my iPod and it erased everything i had on it. How do i retrieve the songs that i bought from the iTunes store? when i try to download/buy them again they tell me i have already purchased them do i want to buy them again?

I updated my iPod and it erased everything i had on it. How do i retrieve the songs that i bought from the iTunes store? when i try to download/buy them again they tell me i have already purchased them do i want to buy them again? I have authorized my computer but none of them are in my music now.

You buy one and only one download.
It is your responsibility to move/copy/backup your music.
Certainly you did not update your ipod without making sure that you had transferred anything purchased on the ipod to your computer and included it in your regular backup copy of your computer.

How to get the values of Select-options from the screen.

The value of parameter can be obtained by function module 'DYNP_VALUES_READ' but How to get the values of Select-options from the screen? I want the F4 help values of select-options B depending on the values in Select-option A.So I want to read the Select-option A's value.

Hi,
Refer this following code..this will solve your problem...
"Following code reads value entered in s_po select options and willprovide search
"help for s_item depending upon s_po value.
REPORT TEST.
TABLES : ekpo.
DATA: BEGIN OF itab OCCURS 0,
ebelp LIKE ekpo-ebelp,
END OF itab.
SELECT-OPTIONS   s_po FOR ekpo-ebeln.
SELECT-OPTIONS s_item FOR ekpo-ebelp.
INITIALIZATION.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_item-low.
DATA:
dyn_field TYPE dynpread,
temp_fields TYPE TABLE OF dynpread,
zlv_dynpro TYPE syst-repid.
zlv_dynpro = syst-repid.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname     = zlv_dynpro
      dynumb     = syst-dynnr
      request    = 'A'
    TABLES
      dynpfields = temp_fields
    EXCEPTIONS
      OTHERS     = 0.
LOOP AT temp_fields INTO dyn_field.
    IF dyn_field-fieldname EQ 'S_PO-LOW'.
        SELECT * INTO CORRESPONDING fields OF TABLE itab FROM ekpo
        WHERE ebeln EQ dyn_field-fieldvalue.
        EXIT.
    ENDIF.
ENDLOOP.

How can I get netflix streaming audio, the video is fine but the audio coming through is from the TV(dish)

how can I get netflix streaming audio, the video is fine but the audio coming through is from the TV(dish)

It's exactly as I stated. Whenever I try to drag these kinds of loops (ESX24 / software instrument loops? the ones marked in green with the white music note next to them) from the loop browser into the timeline a message comes up saying Audio Not Found for that loop. And a new track is created automatically when loops are dragged into the timeline, so I'm not creating some other random / synth instrument track so I'm not sure what the deal is... But perhaps I'll try creating a software instrument track first and then drag the loop into that track and see what happens - maybe there's something with the default settings that automatically creates audio tracks whenever loops are imported?

I have two different apple id's, one on my computer and one on my phone. i connected my phone to sync music and i lost most of my music. i realised that the music i lost is from the apple id on my mac. how do i undo this mess? help anyone?

i have two different apple id's, one on my computer and one on my phone. i connected my phone to sync music and i lost most of my music. i realised that the music i lost is from the apple id on my mac. how do i undo this mess? help anyone?

The iphone will mirror the selected content of your computer.
Make sure everything is on your computer. Select what you want on your iphone, sync

Determining the Status of Provisioned Resources from the database

Similar Messages

Maybe you are looking for