Detremine any user is logged in.

I know this has been asked before but none of the threads I have found give an answer to this or at least a good answer. Is there any way that I can determine if there is a user logged into a workstation, not the Primary user or logged onto primary workstation option. (The Primary user and Primary Workstation is useless in our environment as we have multiple users per workstation daily.) There are some actions in bundles that do not play nice when no user is logged in and it would be nice not filling up the log with these messages, for example "There is no user session available or user session cannot be determined". Also if there is a bundle that needs to know if there is a user logged in, as it may need to be run differently if they are not. This would be simple as adding a filter under the Requirements to say "User Logged In" (Yes or No) or something similar so that this action could determine if it needs to run or not.
Michael

Craigdwilson,
> Set an System Requirement for "LogonServer"
> If nobody is logged on, the var will not exist.
> I have multiple customers using this solution.
Perfect. Thanks!
Anders Gustafsson (NKP)
The Aaland Islands (N60 E20)
Have an idea for a product enhancement? Please visit:
http://www.novell.com/rms

Similar Messages

How can i know about any users who log on sap last one month..all data and

Dear all,
how can i know about any users who log on sap last one month..all data and transaction code they used in a month.
Regards,
ASHUTOSH
9891595497

Dear Ashutosh,
I think your question is in the wrong forum. This is for SAP MDM related questions and answers. SAP MDM does not use Transaction codes. So you may not get much help here.
Please try posting your question in the ABAP forums and you may get the right resources to help you.
Thanks.
Siva K.

Can't add any users while logged in as the ADMIN

Back in my post, http://discussions.apple.com/message.jspa?messageID=5314598#5314598 , I was stuck in a broken auto login, unable to get past the solid blue screen. I was able to fix that but now I can not add any new users to the accounts pane. Logged in as the ADMIN, I click on the + and nothing happens. I can not add anymore accounts. What can I do to solve this?

It is probably some residual effect from your single user mode actions detailed in your previous post.
Run *Repair Permissions* from Disk Utility to see if that is the cause.
If that doesn't fix it, try deleting the com.apple.loginwindow.plist from your admin account's Library/Preferences folder.
There is also the same file in
HD/Library/Preferences/com.apple.loginwindow.plist
but I am not sure about the consequences of deleting that, as I've never done it.
Whichever you delete, log out and log back in again to re-create them.

Is there any way I can have a program like PocketCloud's server start at reboot, even before any user has logged in? Thanks and cheers, Rob

Thanks in advance for any help or insight you might have on the above question.
Rob

(new ScriptingExample()).run();
note how ive changed in light of all the complaints about coding
in the constructor in example code ; )
import javax.script.*;
public class ScriptingExample{
public static void main(String[] args){
     (new ScriptingExample()).run();
public void run(){
     try{
     ScriptEngineManager manager = new ScriptEngineManager();
     ScriptEngine engine = manager.getEngineByName("js");
     engine.put("answer", "0");
     engine.eval("answer = (8 / 4) * 3.5"); // = 7
     Object answer = engine.get("answer");
     System.out.println("Answer: " + answer);
     } catch(Exception e){
     e.printStackTrace();
}

Query of Clients with a user currently logged on

This is probably a pretty simple one
I am trying to build a query of machines that have any user currently logged on.
I am aware that we can find a list of last logged on user, but I am just looking for a way to find systems that currently have any user currently logged into the computer.

To do that you would need to have hardware inventory running every 1 minute on clients.
Or DCM running every 1 min.
let me clarify before someone actually tries to do this.... I think this was meant to be sarcasm. You CANNOT run HINV each 1 min.
John Marcum | http://myitforum.com/myitforumwp/author/johnmarcum/

Oracle 10g 10.2.0.1.0 - Unable to log with any user

Hi
I have Oracle 10g R2 10.2.0.1.0. Recently, I enabled ARCHIVELOG on my server as I wanted to migrate the database to a new server. After one day, I tried to access the database using any user apart from SYS or SYSTEM but I could not log in.
I investigated further and this is what happened:
1. When i try to connect to the database using SQLDeveloper with SCOTT, it gives me a message confirming that it has successfully connected to the database.
2. But after that, i cannot access any of my tables/views for this user as it again tries to load the database on the client. SQL developer hangs and I have to terminate the process to restart the client.
When I try using SQL Plus and log in using sqlplus sys@orcl as sysdba; I can connect to the database, but when I try sqlplus scott@orcl; I get this error,
ERROR:
ORA-12154: TNS:could not resolve the connect identifier specified
Please HELP!!! i am really stuck!!!

OK... a new one.. after I try what you suggested, sqlplus is stuck after I enter the password:
C:\Documents and Settings\Administrator>sqlplus scott@orcl
SQL*Plus: Release 10.2.0.1.0 - Production on Tue Apr 13 23:01:21 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter password:
_+

Is there any way to log web traffic information of the users with RV082 router ?

Dear all,
I just bought a RV082 router. I can't find any way for logging the web traffic of the users.
Can it be done with the router ?
Thanks
Fabio

Hello,
If I am not mistaking the best you can do is to send syslog traffic to a server or locally (to a server being preferred) .
But you are going to see stuff like this:
30>Aug 3 22:12:40 2005 gw RGFW-OUT: ACCEPT (TCP 192.168.1.111:2101->212.5.219.46:80 on ppp0) [0,0]
<30>Aug 3 22:12:40 2005 gw RGFW-OUT: ACCEPT (TCP 192.168.1.111:2102->81.0.235.240:80 on ppp0) [0,0]
<30>Aug 3 22:12:40 2005 gw RGFW-OUT: ACCEPT (TCP 192.168.1.111:2103->81.0.235.251:80 on ppp0) [0,0]
<30>Aug 3 22:12:41 2005 gw RGFW-OUT: ACCEPT (TCP 192.168.1.111:2104->212.5.219.46:80 on ppp0) [0,0]
<30>Aug 3 22:12:41 2005 gw RGFW-OUT: ACCEPT (TCP 192.168.1.111:2105->81.0.235.250:80 on ppp0) [0,0]
<30>Aug 3 22:12:41 2005 gw RGFW-OUT: ACCEPT (TCP 192.168.1.111:2106->212.5.219.46:80 on ppp0) [0,0]
You will need an external device to make this happen, Having a proxy server such as Squid would do it for you and not just that but will optimize the newtork :)
Regards,
Jcarvaja
CCIE 42930

Can't Log Any Users Onto My Domain Except the Administrator Getting The Following Error "The user profile service failed the logon"

Hi All,
I am currently completing a project for college which involves the creation of a domain, OU's, GPO's etc within a virtual environment.
I am using Windows Server 2008 Enterprise running this on VMware however after having completed and tested all my GPO's now none of my users are able to log on to the domain and keep getting the following error message "The user profile service failed
the logon" "User profile cannot be loaded".
I have tried to a lot of different options prior to posting which include:
Creating a new user account/s in case the previous user policies were corrupt the same error message is shown.
I also configured my DC to allow users to log onto the DC in case this was a network issue but the same error still exists.
My Administrator account always logs onto the DC without fail and applies all the GPO's as it should.
I have rebuilt my servers twice now at this stage and the same problems keep happening at first it was just confined to users within a single OU but now is Domain wide any suggestions on what I can do.
Thanks,
John

John,
Since this is a project, you may have experimented with various settings in multiple Group Policies, so I would recommend you run the Group Policy Modelling Wizard, as it will show you all the GP settings down to a specific user on a specific computer, plus
tell you which Group Policy sets and which settings, and thereby perhaps find where the problem occurs.
Please mark as answer or vote
as helpful when
it applies. Thanks!

Pisuper Authorization error, I can't logged with any user on Int Builder

Hi SAP Guru's ,
Please help me as i new in SAP XI . I am unable to logged on in Integration Builder with any user i tried pisuper, sapuser but still got the same error "Authorization error, unknown username or password" . I check with T-Codo SU01 but pisuper does not exist so i create one user and assign him SAP_XI_Developer , SAP_XI_Configuration etc but still i am unable to login so kindly requesting you to please help me as quickly as possible.
even though i am unable to logged on user management with any user. PLease tell me the step by step configuration of how to setup each and every part of XI.

check with naveen's reply
XI 7.0 - Authorization error; unknown username or incorrect password
Also visit the blog
Unable to open IR/ESR/ID ? (XI/PI/PI 7.1) [Updated for PI 7.1 support]

Macbook pro will power up but cant log on any user. Buttons on keynoard work but nothing responds to curser.

Macbook pro will power up but cant log on any user. Buttons on keyboard work and light up etc. but nothing responds to curser. Have powered off manually and tried with powercord attached but still same problem.

Have you reset the SMC?
http://support.apple.com/kb/ht3964

How do you make a program run when any user logs in?

I have an application which will need to run when any users logs in.
Such that Joe downloads and installs the application, logs out, then Sally logs in and the application runs for Sally.
Does anyone know how to do this?

Hey Steve, thanks for that link. It seems to be what
I am looking for. What is the meaning of the
~/Library vs /Library ? They are definitely
different folders.
Yes, they are definitely different folders. The "~" character represents the current users home folder, so "~/Library" represents the Library folder that's located inside a users home folder. Anything placed in there will only affect the one user whose home folder you've accessed.
The "/Library" folder is the Library folder that exists at to root of the boot volume. Things placed in this Library folder will affect all users of the system. Basically it's sort of a "global" Library.
Also, from a script, how do I add an item to execute
for that kind of PList?
That could be tricky based on the structure of that particular plist file. I haven't really looked at it closely but one place you could start is to read the "man" page for the "defaults" command... enter "man defaults" in Terminal. The "defaults" command allows you to read/write plist files, but defaults is not very good at accessing deeply nested plist items.
Related to that, how do I tell if the logging item
for my App is already there? I do not want to keep
adding to the list if it is there. If someone
deletes my app and then reinstalls it, I do not want
it to run twice, three times, etc..
Again, you could possibly read the plist using the defaults command and determine whether your item was already present or not.
Do you know of the one in the ~/Library path, what
user it execute as? Since it is all users, it
probably is root or something like that.
No, the one in ~/Library is in each individual user home folder. It will execute with the current user's privileges. This is where Login Items normally go when you go through the GUI... "Sys.Prefs -> Accounts -> Login Items" and add a login item for one user.
Even items placed in /Library, which should execute for all users, will execute with the current user's privileges.
In the near
future we might need root privileges, so I might need
a program to startup for all users as root instead of
the user.
Is your app, that needs to run at login time, a GUI application or is it a faceless shell script (or something similar). Your original post gave me the impression that you needed to launch a GUI application. However, if it's a shell script then you probably want to look at doing a LoginHook instead of using the Login Items procedure at the web page I posted earlier. I believe a LoginHook will also give you the ability to run the script as root.
Check out this link at the ADC website.
or
Take a look at this information and this utility at Mike Bombich's website.
Steve

I loaded microsoft office on my mac airbook. I have no problem accessing it from my user. When the other log on user is clicked the software icons are not avauilable. How do I have any user on my airbook have access. i.e. my wife

I loaded microsoft office on my mac airbook. I have no problem accessing it from my user. When the other log on user is clicked the software icons are not avauilable. How do I have any user on my airbook have access ? . i.e. my wife

Greetings Niel
I was able to copy down the Word, Excel and PowerPoint icons and access "however" when I exit out of the guest user it deletes them from the tool tray at the bottom.... I need them to stay there not have to copy them down..
Can you still assist?

Unable to log into SA540 as any user

This is the 2nd time that this has happened. I am unable to log in my SA540 as any user including the Admin either through the SSL VPN portal or directly connected to the box. The fix is to reboot the device and it starts working but I as I am not on-site all the time, this is a problem. I recently upgraded the firmware to 1.1.65.
Has anyone else experienced this issue and if so, how can it be resolved?
Thanks

HI Mark,
Could you please collect the log when this happens again.
To collect logs from the SA520 router. Please log in to the SA520 router and
in the URL type with IP address https://IP_address_of_SA520/scgi-bin/dbglog.cgi
thanks
wei

How can I backup my mac on a Time Capsule (connected with ethernet), without any user logged on the mac?

Time Machine by default does not run when no user is logged in, there's some way to let backups run without any user logged on the mac?
I need to backup 3 iMac connected through ethernet network to a Time Capsule.
Some hint?

If you use eithernet for your main connection then just plug the TC bridged into the network.
If you use wireless for your internet connection then you can use the TC isolated from the network by ethernet.. but this is really only convenient on a desktop Mac.
The instructions I put in this thread with screenshots.. see near the bottom.
https://discussions.apple.com/thread/4817218?tstart=30
It is a bit tricky so if you have questions ask back here.
Just to say a USB for firewire external drive is faster and more reliable than a TC.. cheaper to buy as well.. although since you already have the TC that is not a concern.. but you can ebay the TC and buy a bigger and better external drive with the proceeds.

ANY TECHNOLOGY/API FOR MAINTAINING USER HISTORY LOG

Hi all!
Im working on a web application. When any user logins to my site and selects some values I want to store those values (permanently) so that when user logs in again these values are selected by default. I mean the values he selected on his last login. I know how to do it myself but I want to know that if there is any standard java technology or API which can provide me the functionality to do so.
Thans 2 U all
jIIA

I am not sure about any standards or APIs that would do that. The simplest solution seems serialization of the session object.

Detremine any user is logged in.

Similar Messages

Maybe you are looking for