/dev/sequencer does not exist --- Found a fix for this !!!!!

Hi guys i used to be able to play midi files and load sf2 into my audigy 2 platinum card. But last week i upgraded my system which was a 2.4 kernel and since then i get /dev/sequencer no such device.
I bit the bullet and upgraded to the 2.6-scsi kernel.
Got my sound working under alsa but still if i use sfxload i get /dev/sequencer no such device.
Now i know its there in /dev/sequencer becuase i checked the links etc.
Also here is my lsmod output :
Module Size Used by
DAC960 76072 0
parport_pc 29124 1
pcspkr 4172 0
shpchp 100868 0
pci_hotplug 30788 1 shpchp
ehci_hcd 37256 0
ohci_hcd 23044 0
i2c_i801 9100 0
i2c_core 22784 1 i2c_i801
uhci_hcd 33808 0
emu10k1_gp 4096 0
gameport 17160 2 emu10k1_gp
hw_random 5908 0
appletalk 40276 2
ipx 32420 2
p8022 2816 1 ipx
psnap 4356 2 appletalk,ipx
llc 8212 2 p8022,psnap
nvidia 3713700 12
eth1394 21256 0
videodev 10368 0
ohci1394 36404 0
ieee1394 106200 2 eth1394,ohci1394
lp 13060 0
parport 38600 2 parport_pc,lp
snd_seq_oss 36352 0
snd_seq_midi_event 8448 1 snd_seq_oss
snd_seq 57488 4 snd_seq_oss,snd_seq_midi_event
snd_pcm_oss 55456 0
snd_mixer_oss 20480 1 snd_pcm_oss
snd_emu10k1 120324 3
snd_rawmidi 26784 1 snd_emu10k1
snd_seq_device 8972 4 snd_seq_oss,snd_seq,snd_emu10k1,snd_rawmidi
snd_ac97_codec 83960 1 snd_emu10k1
snd_pcm 97796 5 snd_pcm_oss,snd_emu10k1,snd_ac97_codec
snd_timer 27012 3 snd_seq,snd_emu10k1,snd_pcm
snd_page_alloc 10244 2 snd_emu10k1,snd_pcm
snd_util_mem 4992 1 snd_emu10k1
snd_hwdep 9760 1 snd_emu10k1
snd 60388 15 snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_emu10k1,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_pcm,snd_timer,snd_hwdep
soundcore 10848 1 snd
3c59x 42792 0
mii 6272 1 3c59x
ide_scsi 18948 0
ide_floppy 20864 0
usb_storage 76992 0
usbcore 127740 5 ehci_hcd,ohci_hcd,uhci_hcd,usb_storage
rtc 14156 0
tsdev 8384 0
evdev 10240 0
Also i have tried reloading alsa to no avail.
I have audio just no sequencer audio using my sound fonts.
Even tried rebuilding awesfx.
HELP PLEASE...

Just thought id post this fix to my problem in case someone else has a similar nightmare.
I was reading through the wiki when i saw the usb midi page . Now my keyboard is not usb but still it can't hurt i thought.
And guess what i got my sound fonts to load again and my midi keyboard working.
Carefully went through all the options i had entered in the terminal to find that it was "aconnect -i" that did the trick for me so i entered this in my rc.local and rebooted to see if my midi still worked.
Hey presto i've got sound fonts and midi everytime now .
Heres my lsmod output after aconnect -i ....
Module Size Used by
appletalk 40276 2
ipx 32420 2
p8022 2816 1 ipx
psnap 4356 2 appletalk,ipx
llc 8212 2 p8022,psnap
nvidia 3713700 12
snd_seq_midi 9632 0
snd_emu10k1_synth 8448 0
snd_emux_synth 39296 1 snd_emu10k1_synth
snd_seq_virmidi 8832 1 snd_emux_synth
snd_seq_midi_emul 8192 1 snd_emux_synth
eth1394 21256 0
videodev 10368 0
ohci1394 36404 0
ieee1394 106200 2 eth1394,ohci1394
lp 13060 0
parport 38600 1 lp
snd_seq_oss 36352 0
snd_seq_midi_event 8448 3 snd_seq_midi,snd_seq_virmidi,snd_seq_oss
snd_seq 57488 8 snd_seq_midi,snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_oss,snd_seq_midi_event
snd_pcm_oss 55456 0
snd_mixer_oss 20480 1 snd_pcm_oss
snd_emu10k1 120324 4 snd_emu10k1_synth
snd_rawmidi 26784 3 snd_seq_midi,snd_seq_virmidi,snd_emu10k1
snd_seq_device 8972 7 snd_seq_midi,snd_emu10k1_synth,snd_emux_synth,snd_seq_oss,snd_seq,snd_emu10k1,snd_rawmidi
snd_ac97_codec 83960 1 snd_emu10k1
snd_pcm 97796 5 snd_pcm_oss,snd_emu10k1,snd_ac97_codec
snd_timer 27012 3 snd_seq,snd_emu10k1,snd_pcm
snd_page_alloc 10244 2 snd_emu10k1,snd_pcm
snd_util_mem 4992 2 snd_emux_synth,snd_emu10k1
snd_hwdep 9760 2 snd_emux_synth,snd_emu10k1
snd 60388 17 snd_emux_synth,snd_seq_virmidi,snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_emu10k1,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_pcm,snd_timer,snd_hwdep
soundcore 10848 1 snd
3c59x 42792 0
mii 6272 1 3c59x
ide_scsi 18948 0
ide_floppy 20864 0
usb_storage 76992 0
usbcore 127740 2 usb_storage
rtc 14156 0
tsdev 8384 0
evdev 10240 0
I hope this helps someone...

Similar Messages

"404 Error - The requested resource does not exist" found in portal for Collaboration room

Hi Experts,
I am trying to resolve this issue since a week but not able to solve it, so i need your help.
The Problem is when i assign a collaboration room to a user, the room is assigned but when the user clicks on the room link it gives the "404 Error - The requested resource doesn't exist". But if a new room is created and give access to the user, the user is able to open the new room through the link and view the documents.
The Unique thing about the error is, it doesn't occur for every user it happens with few users, since I am the super_admin I am able to view all the rooms without getting such "404 error" even for once.
I have tried by setting up all the permissions to the room and also assigning Everyone role to the rooms, still the problem persists.
I am unable to find a solution for this, so need your help.
Eagerly waiting for your helpful replies.
Thanks in advance.
Thanks & Regards,
Shumana.

Hi
Try with following link (VC should be in Caps) -
http://localhost:50400/VC/default.jsp
Also check whether you have proper admin roles assigned to your user id.
Regards
Sandeep
Edited by: Sandeep Patki on Sep 16, 2009 8:47 AM

Compilation error[ORA-02289: sequence does not exist] ,even if dbVersion '9.3.350',so strange!

I know the reason is that PL/SQL is pre-compilation, so now dbVersion < '9.3.350', even if I don't need get REFDESIG_ID_SEQ.nextval ,
it will also cause this compilation error. So my question is how should I code that?
When dbVersion < '9.3.350' , no sequence REFDESIG_ID_SEQ, just print '1####';
else get REFDESIG_ID_SEQ.nextval , then print '2####'
But now even if dbVersion < '9.3.350', it will cause compilation error[ORA-02289: sequence does not exist] .
How to resolve this? Thanks a lot.
declare
    maxid   number;
    nextid number;
    agileid number;
    v_date date;
    dbVersion varchar(8):=0;
begin
select substr(value,1,7) into dbVersion from propertytable where parentid = 5001 and propertyid=37;
        DBMS_OUTPUT.PUT_LINE(dbVersion);
        if (dbVersion < '9.3.350') then
              DBMS_OUTPUT.PUT_LINE('1####');
        else
              DBMS_OUTPUT.PUT_LINE('2####');
              select REFDESIG_ID_SEQ.nextval into agileid from dual;
        end if;
end;

In my DB, If dbVersion < '9.3.350' , no sequence REFDESIG_ID_SEQ
When dbVersion >= '9.3.350' ,sequence REFDESIG_ID_SEQ will exist,
Now my dbVersion < '9.3.350' , and this pl/sql also cause this error.
SO how should I to resolve it ?
Now I need a test case, if dbVersion < '9.3.350' , then print '1####';
else , get REFDESIG_ID_SEQ.nextval   firstly , then print '2####'
How should I code?Thanks a lot.

Workflow error [WF_ERROR] ERROR_MESSAGE=ORA-02289: sequence does not exist

Dears,
I created simple custom workflow (Start -> Notification -> End).
I got the following error when I run the workflow.
[WF_ERROR] ERROR_MESSAGE=ORA-02289: sequence does not exist ERROR_STACK= FND_SEARCH_EVENTS.On_Object_Change(oracle.apps.wf.notification.send, 5C84790B967158FFE04400144F23BF3C)
The notification activity returned this error but the notification has been sent to performer.
I searched for solution to fix this problem and I found one result for the same problem without any solution.
http://www.itpub.net/thread-1558559-1-1.html
Thank you

It looks as if DB sequence FND_SEARCH_EVENTS_SEQ does not exist. Please try to reload it as follows:
java oracle.apps.fnd.odf2.FndXdfCmp applsys <pwd> apps <pwd> thin "<db server>:<db port>:<SID>" all $FND_TOP/patch/115/xdf/fnd_search_events_seq.xdf $FND_TOP/patch/115/xdf/xsl
Regards,
Alejandro

Error creating sdo_pc point cloud: "ORA-02289: sequence does not exist"

Oracle Database 12c Enterprise Edition Release 12.1.0.1.0
I've come across a problem when creating point clouds - every so often I'll get an error about a sequence not existing.
ERROR at line 1:
ORA-13199: Invalid Parameters for Partition_Table
ORA-13199: Invalid Parameters for Partition_Table
ORA-13249: Stmt-Execute Failure: DROP SEQUENCE "MDPCS_a_17745$$$"
ORA-29400: data cartridge error
ORA-02289: sequence does not exist
ORA-06512: at "MDSYS.PRVT_PC", line 3
ORA-06512: at "MDSYS.PRVT_PC", line 171
ORA-06512: at "MDSYS.SDO_PC_PKG", line 179
ORA-06512: at line 17
I've got a test case which creates a table where we'll put a sdo_pc, a block table and then a loading XYZ table. We then loop a bunch of times and create a PC for each.
Test case setup:
create table pc_test (
    id integer primary key,
    pc sdo_pc);
create sequence pc_test_id;
create table pc_test_blocks as select * from mdsys.sdo_pc_blk_table;
create table xyz (
    rid number,
    val_d1 number,
    val_d2 number,
    val_d3 number);
insert /*+ append */ into xyz (
    select
        rownum,
        round(dbms_random.value(1,10000),2),
        round(dbms_random.value(1,10000),2),
        round(dbms_random.value(20,50),2)
    from dual
    connect by level <= 1000);
commit;
Run test case:
declare
l_pc sdo_pc;
    l_id pls_integer;
begin
    for i in 1..50 loop
        l_pc := sdo_pc_pkg.init(
            'PC_TEST', 'PC', 'PC_TEST_BLOCKS', 'blk_capacity=500',
            sdo_geometry(2003, 2157, NULL, sdo_elem_info_array(1,1003,3), sdo_ordinate_array(400000, 500000, 800000, 1000000)),
            0.005, 3, null);
        l_id := pc_test_id.nextval;
        dbms_output.put_line('PC_TEST id=' || l_id);
        insert into pc_test (id, pc) values (l_id, l_pc);
        sdo_pc_pkg.create_pc(l_pc, 'XYZ');
    end loop;
end;
Some of the PCs will create, but eventually it'll blow up with
ORA-02289: sequence does not exist
In so far as I can tell, once I call sdo_pc_pkg.create_pc(), Oracle is creating a sequence with a name such as MDPCS_a_1751F$$$. When it is done creating the blocks, it then tries to drop the sequence. However the statement to drop the sequence is wrapped in double quotes - so if the sequence name contained any lowercase letters then it will error out when trying to drop it. The values used between the underscores seem to be hexadecimal - sometimes they're numbers only, sometimes numbers and uppercase letters, sometimes numbers and lowercase letters.
Has anybody else come across this issue?
The issue isn't critical as the PC blocks do seem to be created correctly, so the issues are: (a) my pl/sql block errors out and (b) I'm left with sequences lying around.
For the former I'll catch the exception and ignore it, for the latter I'll just drop the sequences myself afterwards.

I tried the test on 11.2.0.4. On that release I get an error during a rename:
ERROR at line 1:
ORA-13199: Invalid Parameters for Partition_Table
ORA-13199: Invalid Parameters for Partition_Table
ORA-13249: Stmt-Execute Failure: RENAME "MDPCI_a_26062$$$" TO "M3_A_26062$$"
ORA-29400: data cartridge error
ORA-04043: object MDPCI_a_26062$$$ does not exist
ORA-06512: at "MDSYS.PRVT_PC", line 3
ORA-06512: at "MDSYS.PRVT_PC", line 157
ORA-06512: at "MDSYS.SDO_PC_PKG", line 74
ORA-06512: at line 17

Error ORA-02289: sequence does not exist

While I was practicing chapter 6 a book on "hands-on oracle database 10 g express edition for windows" by Mr. Bobrowski forwarded by tom kyte, I like to be one those as well, lol, the living legend of oracle technology <page 225-226> , I got the following error while trying to insert the data manually
error ORA-02289: sequence does not exist
I also checked the sequence, it does exist ,
host-ids, db-ids, ap-ids all do exists
I am wondering my OS windows xp and however, I have entered AIX in host OS field and 5.2.0.0 in the hostos_version field and cpu=4
I kind do not understand this too since my pc running windows xp
any help would be appreciated since i couldn't go forward in my practice.
I e-mailed the author of the book (oracle Press) but no-reply so far, well I can understand that there is no money.

Basically, I copied everything from the cd-rom provided in the book of this author steve, oracle press. I logged on using my account <system> and password. The user is here only one which is <system>.
Everything was working well, until then as per the direction in the chapters upto 1- to mid 6, this is the first time I am stuck in following this book's simple excercises. It also asks me to look at the object if the sequence host_ids does exists in the drop down combo, as a matter of fact it does exist.
I am still wondering my question "my OS windows xp and however, I have entered AIX in host _OS field and 5.2.0.0 in the host_os_version field and cpu=4
I kind do not understand this too since my pc running windows xp "

ORA-02289 (10: 10): PL/SQL: ORA-02289: sequence does not exist

Hi,
I want to run a trigger on SCOTT account.But wheni try to run it.I am getting ' ORA-02289 (10: 10): PL/SQL: ORA-02289: sequence does not exist'.PLease help out

Sequence FUNCTION_SEQ does not exist...
Pease run
Select * from user_objects
where object_type='SEQUENCE'
and object_name='FUNCTION_SEQ'In order to see that this object doesnt exist on your schema...
Maybe you are trying to use sequence in different schema... Check it out too
Select * from all_objects
where object_type='SEQUENCE'
and object_name='FUNCTION_SEQ'And if you has access to DBA_ views check this too...
Select * from dba_objects
where object_type='SEQUENCE'
and object_name='FUNCTION_SEQ'If you need such sequence please give us an example of values you need and will provide a sequence creation script for you..

ORA-02289: sequence does not exist Error

When add Entity Attribute Value : adf.object.nextVal('DenialCommentId')
Value Type: Expression
Iam getting ORA-02289: sequence does not exist Error in 11g 1.1.3.0 version .How to Solve it .Any solutions please suggest me .Thanx in advance
Ravi

try using adf.object.nextValue('DenialCommentId') to find out whether the compiler is looking for a sequence named object in schema adf or not.
Regards
Etbin

Client sync failure: "sequence does not exist"

Hello everyone,
I could use some help on this.Using 10.3 mobile server and a mobile6 client (using the official mobile6 patch). After some syncs, a mobile client gets the error "sequence does not exist", and the replication fails.
When looking at the server log, after the client has successfully uploaded its data, a sequence "M$8232031$M" is created on the server just before the client can download its new data. Then, the server tries to get the nextval from that sequence - and the sequence is not there !!
What happened, what can cause this behaviour ?
Here is an excerpt from the server log with the "faulty" client sync :
clog: Subscription.prepStatement: ALL: SQL: INSERT INTO MOBILEADMIN.C$ALL_MANGLED_NAMES(CLIENTID,ORIGINAL_NAME,MANGLED_NAME) VALUES(?,?,?):
Object: @1da9a66
clog: Subscription.execDirectLogged: FINEST: GENERAL: Created M$8232031$M
clog: Subscription.mangleOS: ALL: FUNCTION: Exiting
clog: Subscription.pstmClose: ALL: FUNCTION: Entering
clog: Subscription.pstmClose: FINEST: GENERAL: pstmt::close
clog: Subscription.pstmClose: ALL: FUNCTION: Exiting
clog: Subscription.mangle: FINEST: GENERAL: conn user =MOBILEADMIN, e[0]=MOBILEADMIN
clog: Subscription.mangle: ALL: FUNCTION: Exiting: user.equals(e[0])
clog: Consolidator.DQ: ALL: FUNCTION: Invoking
clog: O8Server.advanceSequence: ALL: FUNCTION: Invoking
clog: Subscription.execSelectDirect: ALL: FUNCTION: Entering
clog: Subscription.execSelectDirect: ALL: SQL: exec:::
Object: SELECT "M$8232031$M".NEXTVAL FROM DUAL
clog: HeliosSession.startSession: FINEST: GENERAL: Decrement client download 0
clog: HeliosSession.clientDownload: ALL: FUNCTION: Invoking
clog: HeliosSession.startSession: MANDATORY: ALL:
Exception: java.sql.SQLException: ORA-02289: Sequence ist nicht vorhanden.
ORA-02289: Sequence ist nicht vorhanden.
clog: HeliosSession.sendE, s=ORA-02289: Sequence ist nicht vorhanden.
: ALL: FUNCTION: Entering
clog: HeliosSession.sendCompress: ALL: FUNCTION: Entering
clog: HeliosSession.sendCompress: FINEST: GENERAL: deflated total in,out is 52,2 bytes
clog: HeliosSession.sendCompress: FINEST: GENERAL: Sending byte array of 2 bytes
clog: HeliosSession.sendConv: ALL: FUNCTION: Invoking
clog: HeliosSession.initConvOS: ALL: FUNCTION: Invoking
clog: Client.send: ALL: FUNCTION: Entering
clog: Client.send: ALL: FUNCTION: Exiting
clog: ConvAtOutputStream.write: ALL: FUNCTION: Entering
clog: ConvAtOutputStream.write: FINEST: GENERAL: exlen:16
clog: ConvAtOutputStream.write: ALL: FUNCTION: Exiting
clog: ConvAtOutputStream.write: ALL: FUNCTION: Entering
clog: ConvAtOutputStream.write: FINEST: GENERAL: exlen:8
clog: ConvAtOutputStream.write: ALL: FUNCTION: Exiting
clog: HeliosSession.sendCompress: ALL: FUNCTION: Exiting
clog: HeliosSession.sendE: ALL: FUNCTION: Exiting
clog: HeliosSession.sendCompress: ALL: FUNCTION: Entering
clog: HeliosSession.sendCompress: FINEST: GENERAL: Sending byte array of 60 bytes
clog: HeliosSession.sendConv: ALL: FUNCTION: Invoking
clog: ConvAtOutputStream.write: ALL: FUNCTION: Entering
clog: ConvAtOutputStream.write: FINEST: GENERAL: exlen:6
clog: ConvAtOutputStream.xop: ALL: FUNCTION: Invoking
clog: Client.send: ALL: FUNCTION: Entering
clog: Client.send: ALL: FUNCTION: Exiting
clog: ConvAtOutputStream.xop: ALL: FUNCTION: Invoking
clog: Client.send: ALL: FUNCTION: Entering
clog: Client.send: ALL: FUNCTION: Exiting
clog: ConvAtOutputStream.xop: ALL: FUNCTION: Invoking
clog: Client.send: ALL: FUNCTION: Entering
clog: Client.send: ALL: FUNCTION: Exiting
clog: ConvAtOutputStream.xop: ALL: FUNCTION: Invoking
clog: Client.send: ALL: FUNCTION: Entering
clog: Client.send: ALL: FUNCTION: Exiting
clog: ConvAtOutputStream.write: ALL: FUNCTION: Exiting
clog: HeliosSession.sendConv: ALL: FUNCTION: Invoking
clog: ConvAtOutputStream.flush: ALL: FUNCTION: Entering
clog: ConvAtOutputStream.flush: FINEST: GENERAL: tail = 6
clog: ConvAtOutputStream.xop: ALL: FUNCTION: Invoking
clog: Client.send: ALL: FUNCTION: Entering
clog: Client.send: ALL: FUNCTION: Exiting
clog: ConvAtOutputStream.flush: FINEST: GENERAL: Sent to pipe 16 bytes
clog: HeliosSession.sendCompress: ALL: FUNCTION: Exiting
clog: Client.flush: ALL: FUNCTION: Entering
clog: Client.flush: ALL: RESUME: Data length: 86
clog: Client.flush: ALL: FUNCTION: Exiting
clog: HeliosSession.startSession: FINEST: GENERAL: disconnecting jdbc
clog: JupConnection.destroy: ALL: FUNCTION: Entering
clog: JupConnection.destroy: ALL: FUNCTION: Exiting
clog: HeliosSession.startSession: ALL: FUNCTION: Exiting
clog: Client.startSync: MANDATORY: ALL:
Exception: java.sql.SQLException: ORA-02289: Sequence ist nicht vorhanden.
ORA-02289: Sequence ist nicht vorhanden.
clog: HeliosSession.getSessionType: ALL: FUNCTION: Invoking
clog: Server.newConnection (): ALL: FUNCTION: Invoking

Check your err.log after you create the users to see if there is any issues.
I have had various issues with users Data Subsetting not being set. I find this happens when there are many blocking locks and users are being drop, created, password change, etc. Blocking locks are part of the nature of the application, the only way to really combat that is to do some performance tuning on the MGP and the SYNC.
Here is how I create my user:
        try {
            rm.createUser(USERNAME, PASSWORD, DISPLAY_NAME, "U");
            rm.setUserAccess("/app", USERNAME, true);
            rm.setTemplateVariable("/app", USERNAME, "USER_ID", PARAMETER);
            rm.commitTransaction();
        } catch (ResException res) {
            rm.rollbackTransaction();
            res.printStackTrace();
        }

In Adobe Pro XI when converting an excel file to a pdf, the pdf is not retaining the page size settings. Has anyone found a fix for this?

In Adobe Pro XI when converting an excel file to a pdf, the pdf is not retaining the page size settings. Has anyone found a fix for this?

It shouldn't print each page as a separate job and
each tab has a different name, so, even if it did, it
ought to give the printouts the name of the tabs.
It doesn't print each page as a separate job unless the orientation is different - that's the bug. And the name of the job is taken from the name of the window, not the name of the tabs. That's how every application works, which, I think, is why Excel allows the specific selection or the active sheets to be printed.
Still, that does sound like a plausible explanation.
However, even if presented with multiple prints with
the same name, the spooler should print each one!
The spooler does print each one - you can watch the spooler process the multiple jobs. I think, though, that they are being overwritten since all the jobs have the name of the window as the job title. And since this happens after the Save Dialog is presented, there's really nothing the application can do. To Excel, it's one job, the multiple orientations don't matter; it's just that Apple doesn't handle it correctly.
As a workaround, you can print the selections one at a time and give them unique names and then rejoin them in one PDF file.

"ORA-21700: object does not exist or is marked for delete" select from ADT

Posted this in OLAP section as well, but since this is Object technology, I thought I would repeat it here. Sorry about the duplication.
BTW, I'm using Oracle9i 9.2.0.4.1.
I'm trying to create a script that can automate the process of generating abstract data types for use in an OLAP_TABLE function. I'm following the examples in the documentation. Everything runs great the FIRST time I run my script, but when I drop my types and re-create them, when I run the next SELECT statement against the OLAP_TABLE function, I get:
ERROR at line 1:
ORA-21700: object does not exist or is marked for delete
My script drops the ADTs before creating, but somehow they are not REALLY being dropped.
SET ECHO ON
SET SERVEROUT ON
DROP TYPE ts_table_6;
DROP TYPE ts_row6;
CREATE TYPE ts_row6 AS OBJECT(
CONJ2002 VARCHAR2(400),
CONJ2002_DATA number(16),
PERIOD VARCHAR2(10),
PERIOD_NAME VARCHAR2(20));
CREATE TYPE ts_table_6 AS TABLE OF ts_row6;
SELECT CONJ2002, period, period_name, conj2002_data FROM TABLE(OLAP_TABLE(
'REFVLMTA DURATION QUERY',
'ts_table_6',
'limit CONJ2002 to first 3',
'MEASURE CONJ2002_DATA from CONJ2002.DATA
DIMENSION CONJ2002 from CONJ2002
DIMENSION PERIOD from PERIOD WITH
ATTRIBUTE PERIOD_NAME from period.name'));
Again, it works the first time, but not the second time. I need to bump up the ADT names to ts_row7 and ts_table_7. SQL Plus says the types are being dropped.
Any ideas?
Dan Vlamis [email protected]

Hi Dan
What append if you do a connect between the DROP and the CREATE statements?
Chris

The security database on the server does not have a computer account for this workstation trust relationship

When I try to log on to my DC it says "The security database on the server does not have a computer account for this workstation trust relationship". It won't let me log on. I installed another server server 2012r2 (its virtual )
and I can get to ADSI edit.
I think what happened was I had a pc that could not connect without unplugging the network cable. So I found this fix
FIX: “The security database on the server does not have a computer account for this workstation trust relationship”2032011
I’ve seen a lot of solutions, or suggestions rather, with regard to the error in the title of this post. In my experience, the problem can almost always be resolved without extra domain add/removes and reboots, which is the most prevalent solution I have
seen around. Usually, this issue is due to a mismatch between attributes of the computer account in Active Directory and those values on the system itself. Here are the steps I take to fix this issue when it crops up:
Open up Active Directory Users & Computers pointed to the domain the computer account resides in
From the “View” pull-down menu, make sure that “Advanced Features” is checked
Navigate to the part of your organizational unit (OU) structure where the computer account for this server resides
Open the Properties for the computer object
Choose the “Attribute Editor” tab on the Properties dialog box
Check the Attributes dNSHostName & servicePrincipalName – anywhere that a fully qualified hostname is specified (e.g. myserver.mydomainname.com), make sure that the entry matches the hostname
you have configured when you go here on your server: Start -> Computer -> Right-Click, Properties -> Change Settings (under “Computer name, domain… settings”) -> Full Computer Name
As an example, for a fictitious W2K8 R2 server whose Full Computer Name is “srv1.mydomainname.com”, these attribute/value pairs should be in Active Directory:
dNSHostName:
srv1.mydomainname.com
servicePrincipalName:
HOST/SRV1
HOST/srv1.mydomainname.com
RestrictedKrbHost/SRV1
RestrictedKrbHost/srv1.mydomainname.com
TERMSRV/SRV1
TERMSRV/srv1.mydomainname.com"
Not reading it carefully I add a computer with the same name as the pc having the issue and followed the above. The problem is that I did not notice that the spn did not want the name of my server (serv1) but the name of the trouble
pc.
dcdiag output
PS C:\Users\administrator.TOM> dcdiag.exe
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
***Error: DC3 is not a Directory Server. Must specify /s:<Directory Server> or /n:<Naming Context> or nothing to
use the local machine.
ERROR: Could not find home server.
PS C:\Users\administrator.TOM> dcdiag.exe /s:DC2
Directory Server Diagnosis
Performing initial setup:
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site\DC2
Starting test: Connectivity
The host 9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM could not be resolved to an IP address. Check the DN
server, DHCP, server name, etc.
Neither the the server name (DC2.TOM) nor the Guid DNS name (9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM)
could be resolved by DNS. Check that the server is up and is registered correctly with the DNS server.
Got error while checking LDAP and RPC connectivity. Please check your firewall settings.
......................... DC2 failed test Connectivity
Doing primary tests
Testing server: Default-First-Site\DC2
Skipping all tests, because server DC2 is not responding to directory service requests.
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : TOM
Starting test: CheckSDRefDom
......................... TOM passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... TOM passed test CrossRefValidation
Running enterprise tests on : TOM
Starting test: LocatorCheck
......................... TOM passed test LocatorCheck
Starting test: Intersite
......................... TOM passed test Intersite
PS C:\Users\administrator.TOM> regsvr32 schmmgmt.dll
PS C:\Users\administrator.TOM> netdig /fix
netdig : The term 'netdig' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ netdig /fix
+ ~~~~~~
+ CategoryInfo : ObjectNotFound: (netdig:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> Setup /PrepareSchema
Setup : The term 'Setup' is not recognized as the name of a cmdlet, function, script file, or operable program. Check
the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ Setup /PrepareSchema
+ ~~~~~
+ CategoryInfo : ObjectNotFound: (Setup:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> netdiag /test
netdiag : The term 'netdiag' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ netdiag /test
+ ~~~~~~~
+ CategoryInfo : ObjectNotFound: (netdiag:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> nslooup
nslooup : The term 'nslooup' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ nslooup
+ ~~~~~~~
+ CategoryInfo : ObjectNotFound: (nslooup:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM>

Ok fixed.
At a elevated cmd prompt run ;
C:\Users\administrator.TOM>setspn -x
As you can see the DC serv1 had duplicate SPNs.
Checking domain DC=TOM
Processing entry 1
HOST/serv1.TOM is registered on these accounts:
CN=SERV1,OU=Domain Controllers,DC=TOM
CN=C00049,CN=Computers,DC=TOM
{14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/TOWN-HBWJ29ZOQC is registered on these ac
counts:
CN=Administrator,CN=Users,DC=TOM
CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
{14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/town-hbwj29zoqc.TOM is registered on thes
e accounts:
CN=Administrator,CN=Users,DC=TOM
CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
RestrictedKrbHost/serv1 is registered on these accounts:
CN=C00049,CN=Computers,DC=TOM
CN=SERV1,OU=Domain Controllers,DC=TOM
RestrictedKrbHost/serv1.TOM is registered on these accounts:
CN=C00049,CN=Computers,DC=TOM
CN=SERV1,OU=Domain Controllers,DC=TOM
found 5 groups of duplicate SPNs.
Went to the computers OU and changed computer c00049 to the correct SPN. Now I have a new issues, I'll start a new thread.

This PC does not meet the minimum requirements for this version of iTunes

Trying to update my iTunes, the installer gives the error message:
"This PC does not meet the minimum requirements for this version of iTunes"
I have gone through the procedures listed in the support section, and have completely removed all Apple software, deleted the file folders etc etc.... still no joy.
This is most annoying as I've just received my brand new iPhone 6+ and I was trying to backup my old device to iTunes so I could restore it onto the new phone and get using it today. Hacked off big time :-\

Well I've eventually managed a work-around. Ver. 11.5.1 was no good because it wasn't compatible with my iphone 5, next one wasn't compatible with my iphone 6+, eventually got 11.4 installed so I could back up my old iphone 5 to it, then restore that backup onto my iphone 6+, which then wasn't up to date with the current iOS so I had to do that before it would sync my apps.
What a ball ache.
If someone would kindly let me know when the latest iTunes works again I's appreciate it, until then I'll have to stick with what I've got.
I need to start again with my music collection, re-import everything and get it on my iphone, because I had to delete it all a few months ago when iOS updated because it didn't have enough storage space on the device! Somehow lost it all off my iTunes in the process!
TBH I've always found the Apple system hideously complicated and infuriating when it doesn't work properly. Instead of making it more and more complex it needs simplifying and making fool-proof so people don't have to go through all this BS just to use their **** phone!

Your system does not meet the minimum requirement for this update (9996)

Hi
recently had to reformat my system with windows 7 profesional. All windows updates where performed and all the drivers where installed correctly except the ethernet driver. windows 7 cannot find a suitable driver. I then downloaded the driver from the link provided on the hpe-590t download site, which is described as a intel gigabyte driver sp52222, however the software driver comes up with the following message your system does not meet the minimum requirement for this update (9996). Has anyone had a similar problem.
Hardware Ids are:
PCI\VEN_8086&DEV_0000&SUBSYS_00008086&REV_00
PCI\VEN_8086&DEV_0000&SUBSYS_00008086
PCI\VEN_8086&DEV_0000&CC_020000
PCI\VEN_8086&DEV_0000&CC_0200
Regards artie

I solicited the the assistance of another one of our experts who is a driver guru, you may see his reply here:
http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-Software-Recovery/Paul-Tikkanen/m-p/4990422#M...
I tend to agree that either the NIC is bad or possiblly a factory restore would help.
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

Found a fix for this: Unable to open Itunes Store on windows XP

Hi,
     I have been searching for this all weekend. For the last month we have been unable to connect to Itunes store. We can connect to the Internet and also access to itunes itself. I have phoned Apple as well as our service provider. No luck with the solutions offered. I have uninstalled and downloaded it again. I have done the winsock suggestion. I have disabled the firewall solution. I have gone into security settings and clicked enable the miscellaneous part. I have run as administrator. Basically everything from this forum and numerous others and also from advice from apple and my service provider. NOTHING WORKED for me on this computer. However on my Laptop which is vista the winsock fix did work. Still didn't solve my desktop until I found another solution and tried. Blow me down it worked. 2 days and hooray.....finally. I found this on a Geek website called "geeks to go" and I have cut and pasted it from there.
This is it.
Copy and paste the text in the code box below into Notepad.
@Echo on
pushd\windows\system32\drivers\etc
attrib -h -s -r hosts echo 127.0.0.1 localhost>HOSTS
attrib +r +h +s hosts popd ipconfig /release
ipconfig /renew ipconfig /flushdns
netsh winsock reset all
netsh int ip reset all
shutdown -r -t 1
del %0
Save as flush.bat to your desktop.
Double-click flush.bat file to run it. Your computer will reboot.
Note: For Windows Vista or Windows 7, right-click flush.bat and select "Run as Administrator".
Hope this one helps anyone out there that has tried most of the other fixes. No bugs or viruses from this...so far.
Steve

You're probably going to need to install service pack 2 or 3.

/dev/sequencer does not exist --- Found a fix for this !!!!!

Similar Messages

Maybe you are looking for