Developer 6i Upgrade

Hi,
We are in a process of 11g upgrade(with EBS).
As a part of it we are upgrading Developer 6i to patchset 18.
We are about to apply Patch 4948577 and the read of this patch suggests as below.
Note: You should be logged in as the oracle user with write previleges to the
ORACLE_HOME.(ie. You have write permission to all the files under $ORACLE_HOME)
So do we have to apply this patch as orauser or appsuser as in one of the posts i found that we have to apply this patch as appsuser...?
Anyone please help in this regard...
Thanks,
Praveen

Hi,
During our Developer 6i upgrade the following step of relinking
cd $ORACLE_HOME/forms60/lib; make -f ins_forms60w.mk install
failed as follows:
/usr/bin/ld -o /u04/Rel11i/devora/8.0.6/lib/libifjapi60.so -z muldefs -G -L/u04/Rel11i/devora/8.0.6/lib/ context.o create.o destroy.o formsapi.o iauasst.o iauexcep.o ifjapi.o objlib.o persistc.o /u04/Rel11i/devora/8.0.6/lib/libifjapi60.a /u04/Rel11i/devora/8.0.6/forms60/lib/ipcpcr.o /u04/Rel11i/devora/8.0.6/forms60/lib/ipdecr.o /u04/Rel11i/devora/8.0.6/forms60/lib/ipkbu.o sslidtab.o -ld2f -lie -lil -lie -lig -lifg -lig -limg -liwg -lidd -lidl -lidg -lid2 -lidg -lid1 -ligo -litg -lihm -lib1 -limg -lipg -licg -lipc -limc -lifc -liwc -liplsd -liod -lioc -lic -lsosd -liic -lit -lic -lipc -lnn60 -lobx60 -lzrc60 -lge60 -lvgs60 -lde60 -lucol60 -lca60 -lnvu60 -lnvc60 -lnvs60 -luicc60 -lmma60 -lmmiw60 -lmmov60 -lmma60 -lmmos60 -lmmoi60 -lmmia60 -lmmft60 -lmmcm60 -luihx60 -luc60 -luipr60 -luimotif60 -lot60 -lrem60 -lree60 -lrec60 -luiimg60 -luimotif60 -luipr60 -luiimg60 -luc60 -lrem60 -luimotif60 -luia60 -ltknqap60 -luipr60 -luimotif60 -lutt60 -lix60 -lixd60 -lrod60 -lror60 -lros60 -lrod60 -lror60 -lros60 -lrod60 -luat60 -lutc60 -lutl60 -lutsl60 -lplsf -lplsb -lextp -lpsd -lplsf -lplsb -lextp -lslax -lsql /u04/Rel11i/devora/8.0.6/lib/nautab.o /u04/Rel11i/devora/8.0.6/lib/naeet.o /u04/Rel11i/devora/8.0.6/lib/naect.o /u04/Rel11i/devora/8.0.6/lib/naedhs.o -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lncr -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lclient -lvsn -lcommon -lgeneric -lmm -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lncr -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lclient -lvsn -lcommon -lgeneric -lepc -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lclient -lvsn -lcommon -lgeneric -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -ldl -lm -lpthread -ldl -lpthread -lm -L/usr/lib -lm -L/usr/X11R6/lib -lXm -L/usr/X11R6/lib/ -L/usr/X11R6/lib/ -lXt -lX11 -lm -lix60 -lixd60 -lX11 -lnlsrtl3 -lXp -lXext -Bdynamic -lnsl -ldl -lm -lc -Bstatic
/usr/bin/ld: cannot find -lXm
make: *** [u04/Rel11i/devora/8.0.6/lib/libifjapi60.so] Error 1
Anyone pls help to solve this error.
Thanks,
Praveen

Similar Messages

Developer 6i upgrade patch 19 JRE doubt

As part of the Developer 6i patch 19 You have to follow the Doc 290807.1 to upgrade Sun JRE
I was reading the following section
Step 2. Rename the JRE Plug-in and Place it on Webserver
Rename the downloaded JRE Native plug-in file from jre-6_uX-windows-i586-p.exe to j2se160X.exe
(Where X = the version number. (For single digit version numbers, please prefix the version number with a zero). Using jre-6u7 as an example X would be 07, so the file would be renamed j2se16007.exe).
Step 2.1.1. Place the JRE 6 Plug-in on the Web Application Tier
Move the j2se160X.exe file to the web application tier and place it in $[COMMON_TOP]/util/jinitiator.
I have a few doubts.....
My webserver is a linux server .....The file I downloaded is a windows file .....Is the step okay ...am I missing something ?

Hi,
My webserver is a linux server .....The file I downloaded is a windows file .....Is the step okay ...am I missing something ?You are not missing anything as this file will be downloaded by the client machines which is running on Windows OK and will be installed there.
Regards,
Hussein

SQL Developer Exchange Upgrade?

Can the APEX installation used to provide the SQL Developer Exchange be upgraded to APEX 3.1 and the various reports redeveloped as Interactive Reports? This would give Exchange users the ability to customise the screens to their requirements, particularly the Feature Requests which has become unwieldy. The ability to perform more complex custom filtering on this report would be very useful.

Agreed. Done.
http://apex.oracle.com/pls/otn/f?p=42626:46
-kris

Ios developer account upgrade

i know i can upgrade my ios personal developer account to a business account by having all documentation and contacting apple support, now i have two question:
usually how long is this process
what happen to all the downloads i have on my existing apps

I assume you mean converting from an individual developer account to a company account.
I did this (I'm in the US) and the entire process took 3 days.
You'll need access to a fax machine for sending Apple the documentation.
You current apps are unaffected except the seller name will now be your company name.

Why isn't Mozilla sending beta versions to registered Firefox add-on/plug-in providers so they can develop compatible upgrades?

Upgrade from Firefox 7.0 to Firefox 7.0.1 after a dialog box appears strongly advising users to upgrade.
Fast Dial is no longer compatible with Firefox 7.0.1.

There are 3+ channels that anyone can access. There are releases, beta, and nightly channels that developers can use to test their extension/plug-in.
See http://www.mozilla.org/en-US/firefox/channel/

BW Upgrade and in parallel development

hi ,
I have some doubts abt in parallel development with bi upgrade.hope someone could clear my doubts on this.
Currently, I'm working on a development request that involves ODS/Cube/Infoobject change.All this are done in dev 3.5x.
Parallely, there is another bi team that's working on the upgrade activity which will upgrade this bw 3.5x to Bi7.0. Issue is that no freeze on development done during this upgrade activity. both development and upgrade is being carried out in parallel by 2 teams.
questions :
1.can anyone highlight the impact of this parallel activity
2.if i choose to stop the development work now temporarily, can i use the same transport request number which was generated in BW 3.5 dev and transport to new BI 7.0 production? or should i choose to recollect the objects again in BI 7.0 environment and continue development after the upgrade activity completed?
3.will i face any compatibility issue later if i stop the development work half way now?
4.Is there any other risk of in parallel dev and upgrade?
Hope someone could advice me on this.
Thank you.
Regards,
Maili
Edited by: Maili06 on Feb 10, 2011 9:51 AM

Infoproviders are version independent. While BW 7.x has different names for ODS (DSO) and additional features, there is no 'conversion' process per se at the infoprovider level. BW 7.x does provide new data transformation and data flow methodologies, but the BW 3.x methods are still functional in the BW 7.x environment.
However.. you will need to release and migrate your 3.x development transports before you perform the BASIS level conversion programs. You will not be able to 'keep them open'. So based on this factor alone, you will need to either
A) create and manage a dual development environment.
B) establish a development "Freeze" schedule that follows your overall development program.
When we converted from BW 3.5 to 7.0, we established a freeze.

Forms Upgrade Developer Days

2 new dates have been added to the Forms Developer Day - Upgrade to the Web Event. For details go to
http://www.oracle.com/ao/events_seminars/forms_email_invite.html
Regards
Grant Ronald
Forms Product Management

Hi Grant,
For those who did not or cannot attend the Forms Upgrade Developer Days, is there anything on the web that one can watch.
Thanks

Oracle Report Failing After Database Version Upgrade

Hi,
I have function code created in RDF file of oracle reports 10g as below-
create or replace function clobblobtest (TMP_MID varchar2) return varchar is
missed_text varchar2(1000) := '';
v_time_stamp date;
v_end_time date;
cursor c1(c_time_stamp in date,
          c_mid in varchar2) is
       select mn.TEXT from msgnotes mn
where mn.mid=c_mid
      and mn.create_date >= c_time_stamp;
cursor c2(c_time_stamp in date,
          c_mid in varchar2,
          c_end_time in date) is
       select mn.TEXT from msgnotes mn
where mn.mid=c_mid
      and mn.create_date >= c_time_stamp
      and mn.create_date <= c_end_time;
begin
IF ('1' = 'INWARD RETURN') then
    select bbi into missed_text from mtf1000 where mid=TMP_mid;
    ELSIF '1'='QPH Missed' then
Select max(nj.update_date) into v_time_stamp
from newjournal nj
where nj.mid=TMP_mid and nj.status = 'CTOVRQ';
for i in c1(v_time_stamp,TMP_mid) loop
missed_text:=missed_text||' '||i.text;
END Loop;
ELSIF ('Rejected'='Rejected' OR 'REJECTED'='REJECTED') then
IF ('TERMINATED' in ('TERMINATED')) THEN
Select min(nj.update_date),max(nj.ENDDATE) into v_time_stamp,v_end_time
from newjournal nj
where nj.mid=TMP_mid and nj.actionid2='16' and nj.actionid1 is null;
for i in c2(v_time_stamp,TMP_mid,v_end_time) loop
missed_text:=missed_text||' '||i.text;
END Loop;
ELSE
Select max(nj.update_date) into v_time_stamp
from newjournal nj
where nj.mid=TMP_mid and nj.status = 'UNSETLED';
for i in c1(v_time_stamp,TMP_mid) loop
missed_text:=missed_text||' '||i.text;
END Loop;
END IF;
ELSE missed_text := null;
END IF;
return(missed_text);
End;
Note:- Text column from table msgnotes is of datatype CLOB.
I have executed report having this function before oracle upgrade and it works fine.
But when i am trying to execute report after oracle version upgrade from 11.2.0.3.0 to 11.2.0.4.0 with same data report fails with runtime error Rep-1401: '' Fatal PL/SQL Error.
With New version we tried to typecast Text column from clob to varchar and executed report then it works... but report runs on old version without any explicit typecasting.
Please note when i run and call this funtion from sql developer with upgraded database version it works fine.
Please advise.

This error can possibly depend on the fact that the PL/SQL engines are in different versions. When using SQL Developer you use the PL/SQL engine in the database. When using Oracle Reports you use the PL/SQL engine in the Oracle Reports Server (Web Logic Server even maybe). These versions - in the Forms and Reports realm - are different (read: a lower version) than the PL/SQL engine in the database.
If I check what version I have in Oracle Forms, as an example, I get 11.1.0.7.0 (Help in the Oracle Forms Builder menu) but in the database I have (select * from product_component_version;) 11.2.0.3.0.
That COULD be your issue...how to fix it I am not sure...

Dispatcher Not Started in Upgrading to ECC 6.0

We are upgrading the system to 4.7 to ECC 6.0 while upgrading the system ,
1)We are taking back up of old prod Server (system copy) in New Dev Server.
2) hardware Configurations of New Dev Server is OS Windows Server 2003 ,32 .bit SQL 2000.
3)we are Upgrading the system to ECC 6.0 in New Dev Server. With the same hardware Configuration which I have Written in Point no2.
4we have format the server and install OS win server 2008 with 64 Bit.18 GB Ram Support.SQL 2005.
4when Format the Server ,and Copy the Data through Attach and Detach in New Dev Server,there was some Error displayed when reebot the server Dispatcher Stops.
5)Dispatcher Not Started.
Regards
Ritesh sharma
ABAP Consultant

Hi Ritesh,
Please check with Basis team on this.
Take the backup of production and physical copy of datafiles and transaction log file.
Now build the new system by system copy (detach/attach).(The platform should be same as production.)
Now you upgrade to your o/s to 2008 64 bit on the development server.Upgrade the mssql 32 bit to mssql2005 64 bit.Then convert the sap to 64 bit and then perform the upgrade to ecc6.
Format will not work.A basis person onsite will help.
Regards
Ashok Dalai

Re: developement Issue

Hi
I am Planning to develop an windows phone 8.1 universal app which i am going to release one year Later. right now i am using windows7 machine.i am planning to buy Windows 8.1 O.S for development. But i got a question.... whether in middle of the development
... does they release any further versions of windows...there will be a problem right...??? Does we have a back ward capability for universal apps...????
can u suggest me whether i can go ahead and buy windows 8.1 O.S or need to wait for Windows 10 release date ???
Give me reply as soon as possible !!!

It's not clear what your concern is, however it has been announced that Windows 10 will be a free upgrade from Windows 8.1 and Windows 7, so you can buy Windows 8.1 now to start development and upgrade it later if needed (
http://blogs.windows.com/bloggingwindows/2015/01/21/the-next-generation-of-windows-windows-10/ )
If you are going to target Windows Phone 8.1 then Windows 8.1 will be fine.
The Windows 10 Technical Preview is available through the
Windows Insider Program if you want to try it out now. Windows 10 will launch this summer (
http://blogs.windows.com/bloggingwindows/2015/03/17/windows-10-launching-this-summer-in-190-countries-and-111-languages/ )
Development details for Windows 10 are not yet available but will be covered at
Build at the end of April. (
http://blogs.windows.com/buildingapps/2015/03/02/a-first-look-at-the-windows-10-universal-app-platform/ )
Update:
Windows 10 developer tooling preview now available to Windows Insiders

Siebel 7.8 -- 8 upgrade process and environments

Hi,
I'm new to Siebel Upgrade and I'm trying to figure out the upgrade process searching on the bookshelf and white papers (best practices).
I still can't comprehend the upgrade architecture and where the new Siebel sw (for ex. Siebel 8 in my case) has to be installed:
Let's suppose to have 3 starting environments: development (7.8), test/production replication (7.8) and production (7.8).
According to the bookshelf there's an initial phase (and this is valid for development environment too) called "upgrade infrastructure" in which they talk about "upgrading" the server, gateway, SWSE, etc. and about installing Siebel software.
For example at pag. 26 in Upgrade Guide version 8.1, during the development environment upgrade explanation, you can read:
"...Upgrade the Gateway Name Server, Siebel Servers, and Siebel Web Server Extension (SWSE).
For information upgrading these Siebel Enterprise components, see Siebel Installation Guide for the operating system you are using.
3 - Install the Siebel Database Server files on the Siebel Server you will use to perform the upgrade.
You only need to install the database server files for the database type that you are upgrading.
4 Install language packs for your currently deployed languages and any new languages...."
Now, starting with a 7.8 development environment, what do they mean: Do I need to install on the same development box (where the 7.8 already resides) also a new 8 development environment (server, gateway, etc.) in order to execute the development upgrade process?
And then, should I install another new 8 environment on the Production/Test machine, in order to perform the production/test environment?
Finally, should I use the test machine (once all is tested as the new production environment?
Probably I'm a bit confused. Can you help me?
Thank you,
Best Regards

Your upgrade process depends on how you want to carry out.
For a Inplace upgrade, whicih means you will be using the existing hardware where earlier version exists, you need to uninstall the earlier version install the new version and the kick of your siebel database upgrade.
The other process is where you obtain new hardware, in this case install new version of siebel software as per requirements and then start your siebel database upgrade. For this you may need to replicate your existing siebel database.
This process applies to all the environments.

Combined Upgrade and Unicode Conversion

Hello, I'm planning to implement an Upgrade from I386/ORA8/46C TO I386/ORA10/ECC6 using CUUC method.
According to the guide, I better build up a sperate Sandbox Server for ABAP Program Modification and Testing. Since the customed ABAP Reports used to be related with the customed table, I suppose the best way for the Sandbox Server is to upgrade it to higher version.
I'm running the Prepare and stuck on the Transport Request import. The sandbox server is not ready yet in a few days.
My question is, can I just ignore the ABAP Program Import at the current phase and import it at the end of 'Prepare' and before the 'Upgrade'.
If yes, how? mannually import the TR for Abap Program changes to 46c after the 'Prepare' finished? Any steps that I should pay attention to spcially?
Any experience is welcome.
Thanks in advance and BR, Sam

This would depend on whether your quality and production are consistent in terms of modifications along with your development server. If all changes to quality and production has happened through changes in development and then transporting those changes to qas and prd, then i would suggest when you run your development system upgrade (sandbox in this case) ideally you should do the changes and modifications and record them in transport request using the option "select for transport". Later when you upgrade another sandbox (copy of qas or prd) you should select the transport request to be imported during the prepare.
But as you are now running PREPARE for copy of development, the prompt for importing transport request into this system is irrelevant and you should say " no" and complete the upgrade, and then the process outlined above..
Hope this helps.
Cheers,
Chetan

Disturbing message when upgrading repository

I'm doing some testing of an upgrade from DI 11.5 to version 12.1 in preparation for our development environment upgrade. When upgrading a repository from version 11.5 to 12.1 I get the follow message at the end of the upgrade log:
Adding 12.0.0 functions... (BODI-300001)
Upgrading repository objects (BODI-300071)
Adding Data Services new substitution configuration ... (BODI-300123)
Adding Data Quality new substitution configuration... (BODI-300133)
Adding Data Cleanse transform... (BODI-300125)
Adding Country IDs transform... (BODI-300126)
Adding Global Address Cleanse transform... (BODI-300127)
Adding Global Suggestion List transform... (BODI-300128)
Adding Match transform... (BODI-300129)
Adding Associate transform... (BODI-300130)
Adding USA Regulatory Address Cleanse transform... (BODI-300131)
Adding User Defined transform... (BODI-300132)
Fixing the UI_mapping_text... (BODI-300124)
The local repository upgrade was cancelled. (BODI-300056)
What is the meaning of this message? Does it indicate an error? Should I be concerned?
Logging into the repository with Designer, everything behaves fine and I am able to run a simple job from the repository.

Found this message, and this thread when upgrading 11.7.0.1 repositories to 12.2.1.0. Worryingly the above posts refer to DS 12.1 and service packs that you'd have thought would already be in 12.2.1.0!
I was upgrading about 14 local repositories and 11 central repos and I struggled to find the common error as to why the fabulous "The central repository upgrade was cancelled. (BODI-300022)u201D message appeared. There seemed to be nothing wrong with the repositories and after the upgrade failed DS thought they were 12.2.
Anyway, to cut a long story short, I solved it thus.
*Close the SAPBO Data Services Repository Manager after each upgrade. Reopen for the next upgrade and it works.*
hmmmm.

FRM-41830 :List of values contain Lov After upgrade Form patch set to 19

We are facing the below issue when click on menu,
FRM-41830 :List of values contain Lov After upgrade Form patch set to 19
Please let us know if someone has got similar type of issues.
Regards,

Hi,
Please verify that you have completed all the steps in the Developer 6i upgrade doc. Also, please post the complete error message.
Have you tried to regenerate the forms via adadmin and see if it helps?
If none of the above helps, please obtain the FRD file as per (Note: 150168.1 - Obtaining Forms Runtime Diagnostics (FRD) In Oracle Applications 11i) and post the contents of the log file here.
Thanks,
Hussein

SQL Developer on Mac OS X Lion (10.7)?

Hi,
I upgraded to MacOSX Lion, but SQL Developer won't start. It's trying though, but finally gives up, only succeeding in starting the cooling fan.
At first I used 1.5.5, then I tried the latest 3.0 version. No difference.
Anyone know how to fix it? Has anyone succeeded to run SQL Developer after upgrading to Lion?
I've been trying to erase old traces of SQL Developer, but perhaps didn't find everything. What files should be deleted, and from where?
Unfortunately I can't find any traces of Oracle being aware of a new OS version on Mac. Do they know, and in that case how do I find that information?
Thanks! Joachim

Did you install java ? Try going to the command line and type in java -version and see what it says. I upgraded to Lion and it's all working fine but I had to install java which is now not included in the default install.
-kris

Developer 6i Upgrade

Similar Messages

Maybe you are looking for