FRM-41830 :List of values contain Lov After upgrade Form patch set to 19

We are facing the below issue when click on menu,
FRM-41830 :List of values contain Lov After upgrade Form patch set to 19
Please let us know if someone has got similar type of issues.
Regards,

Hi,
Please verify that you have completed all the steps in the Developer 6i upgrade doc. Also, please post the complete error message.
Have you tried to regenerate the forms via adadmin and see if it helps?
If none of the above helps, please obtain the FRD file as per (Note: 150168.1 - Obtaining Forms Runtime Diagnostics (FRD) In Oracle Applications 11i) and post the contents of the log file here.
Thanks,
Hussein

Similar Messages

We are trying to do a Quick payment from payment workbench and getting 'FRM-41830: List of values contains no entries' error for payment document column/field. Payment document setup looks good. Not sure what the issue is.

We are trying to do a Quick payment from payment workbench and getting 'FRM-41830: List of values contains no entries' error for payment document column/field. Payment document setup looks good. Not sure what the issue is.

Already gone through following three notes but didn't found resolution.
APXPAWKB: FRM-41830 When Clicking on Payment Document LOV (Doc ID 1081305.1)
R12: APXPAWKB: Payment Document Lov Is Empty When Entering A Payment (Doc ID 857587.1)
R12: Payment Workbench Error: FRM-41830 List Of Values Contains No Entries (APXPAWKB.FMB) (Doc ID 1323875.1)

When I am trying to create an organization in HRMS, and clicking on Type field, it is showing me "Frm-41830: List of values contains no entries". Please suggest me what is the solution

When I am trying to create an organization in HRMS, and clicking on Type field, it is showing me "Frm-41830: List of values contains no entries". Please suggest me what is the solution

Hi,
Type is one part of Org creation....
Optionally, select an organization type in the Type field.
Organization types do not classify your organization, you use them for reporting purposes only. The type may identify the function an organization performs, such as Administration or Service, or the level of each organization in your enterprise, such as Division, Department or Cost Center. You create the organization types you require by entering values for the Lookup Type ORG_TYPE.
Regards:
Shahzad M. Saleem (mark this answer as helpful if it helps u)

List of values from Database Adapter - BPM Forms

Hi all,
Can anyone tell me how to get list of values from Database adapter and a ServiceTask.
As example lets say a table has Employee and Department columns.
I want to list down all the Employees in BPM form (Select One List Box) once i provide the department to the Database Adapter.
Is it possible from the DB Adapter?? What will be the variable type?
Thanks,
Nir

Hi DanielAtwood,
Thanks for your reply...
Actually when i send the variable in 'WHERE Clause' in Db Adapter query it will retrieve more than one record as the output.
I want to put that values to a 'SelectOneChoice' component and list down all the values..
First I tried with data control. But i couldn't find the way to pass the value to the variable(in WHERE clause) to the query in data control view.
Thanks,
Nir

Iphone 4 contact list search doesn't work after upgrading to ios 7

After upgrading I can't find any of my contact list while searching, it's like I type for example 'A' and it's sais no match found
how can I fix it ?

I have same problem,,,,,
Actually, in case of contact added after upgrading, I can find that.
But I can't find any contact list added before upgrading.
How can I fix it??

Error with a copy function after upgrading to patch 18 on the server

Hi experts,
I had the following error when I try to execute with trace in RSPLAN a copy function that was right and functioning over a workbook before upgrading to patch 18 in the server:
'Char. value of 0COSTELMNT does not correspond to value of block char. 623004'
The functions seems to be right also when I check the values but the error message is still there and over the workbook Copy function button.
Thanks,
Diego

Technically, Oracle supports Oracle XE through that forum. At least that was the policy as I knew it a while ago.
With installation issues for XE and the like it's probably better to just post it there. Obviously a grey area and you may well get a hit or two here, but I think you should post these kinds of questions on the XE forum.
When it comes to Apex development questions you can definitely post them here. I know, I know, it really is a pain! But you want to post where you have the best chance of getting good help.
Earl

List of notes after upgrading CIn patch level 22 to 27

Hi
We want upgrade system from 470 CIN patch level 22 to 470 CIN patch level 27.
i would like to know what will be the side effects and precautions to be taken for MM prospective wise. i also wanted know after upgradtion what all the notes required to be applied for new secondary and higher education cess. i need side effects of upgradation, precaustions and list of notes after upgradtion.

Dear,
You may have a look at the "Side Effects" report which is available in SAP Service Marketplace at http://service.sap.com/swdc-addinfo
-> SAP Support Packages in Detail
-> Side-Effects of SAP Notes
There you can define the source/target queues of support packages .
This report provides an overview of currently known side-effects of SAP Notes contained in a Support Package. The list also includes pointers to other SAP Notes, which are able to resolve undesired side-effects.
i hope that helps.
Lucio Rodrigues
SAP AGS

List Of Values problem while running a form

Hi all,
Actually I had developed a form in Forms 4.5. If I connect to the Personal Oracle Database on the same machine, then it is working properly. But if I connect to Oracle server across network and try to run the form, then a message is coming ' F45RUN - The program you are trying to running had problem. Choose ''Close'' or ''Ignore'''. It is giving error of that sort.
Actually the form has two list items, which will have the values selected from the database. If I comment out the statements 'Populate_list(....)', then the form is opening for runtime. What could be the problem??
Thanks in Advance.
Badarinath ([email protected]) If someone could mail me, then it would be even helpful.

Hi Badrinath,
I couldn't underestand the exact problem that you are facing. This may be just because of the different Datase versions. Just try to add "onlogon trigger" to your form having the following code in it:
logon('username','password@connect_string to the server');
Fully compile the form and then run.
Let me know if OK.
Regards,
Aqueel([email protected])
Hi all,
Actually I had developed a form in Forms 4.5. If I connect to the Personal Oracle Database on the same machine, then it is working properly. But if I connect to Oracle server across network and try to run the form, then a message is coming ' F45RUN - The program you are trying to running had problem. Choose ''Close'' or ''Ignore'''. It is giving error of that sort.
Actually the form has two list items, which will have the values selected from the database. If I comment out the statements 'Populate_list(....)', then the form is opening for runtime. What could be the problem??
Thanks in Advance.
Badarinath ([email protected]) If someone could mail me, then it would be even helpful.

Why does iOS application keychain values are deleted after upgrade?

During upgrade testing for my iPad app, I noticed that if I install a newer version (using XCode) on my app-store-installed version, then keychain values I saved prior to the upgrade are not retrieved as expected - they return empty. I tried to check if this is related to the way I installed the app (app store/xcode/testflight) and experienced the same behavior when upgrading versions using only testFlight (testFlight version -> testFlgiht version).
Is this scenario reasonable? How can I make sure I will keep my keychain values between upgrades on the app store?
Thanks, Ori

Hi Melaniefromnorth saanich,
Take a look at the Photos User Manual below. Is it possible you were deleting photos from an album and not from your library?
Delete photos and video - Photos Help
https://help.apple.com/photos/mac/1.0/index.html#/pht3bfab2f96
Delete photos and videos
Do one of the following:
Delete a photo from an album, but not from your library: Select the items you want to delete, then press Delete.
Delete a photo from a moment (placing it in the Recently Deleted album): Select the items you want to delete, press Delete, then click Delete.
Delete a photo from a moment or album (placing it in the Recently Deleted album): Select the items you want to delete, then press Command-Delete.
Deleted photos and video aren’t immediately removed from your library; they’re placed in the Recently Deleted album, where they remain for the number of days shown, and then are deleted. You can recover the items before that period of time (see the next task). If you have iCloud Photo Library turned on, the photos may remain in iCloud up to 40 days and then are removed from all your devices that use iCloud Photo Library. If you’re not using iCloud Photo Library, your deleted photos are removed from your Mac only.
Restore recently deleted items
Deleted items remain in the Recently Deleted album for the number of days shown, and then are deleted permanently. You can view recently deleted items and restore them back into your Photos library.
Choose File > Show Recently Deleted.
Select the photos you want to restore.
Click Recover.
To delete recently deleted items immediately, select the items, then click Delete.
If you use Time Machine to back up your computer, you may be able to recover items after they are deleted permanently from your Mac or iCloud.
For more information on using Time Machine, see Restore a Photos library from a Time Machine backup.
Hope that helps,
- Judy

ACL-list syntax error in PIX after upgrade, need urgent help!

Hello everyone
We have a setup including Cisco ACS + a VPN 3005 Concentrator and a PIX 515E (7.2.4)
We upgraded the PIX version from 7.0 to 7.2.4 and suddenly our downloadable access-list was getting refused when users authenticated against the ACS.
When debuging radius in the PIX we found that entering this line in the downloadable access-list give error and stop the users of getting the ACL.
"deny ip any 192.168.0.0 0.0.255.255"
PIX refused to process their auth request when encountering this line.
Fine we said, we changed the ACL syntax to this : deny ip any 192.168.0.0 255.255.0.0
This made the PIX process the ACL.
We were happy for awhile until VPN users started to complain.
It seems that the VPN 3005 cant deal with the syntax we entered in the PIX!
The VPN 3005 doesnt seem to be able to handle the acl line "deny ip any 192.168.0.0 255.255.0.0" !
It can only handle "deny ip any 192.168.0.0 0.0.255.255" !
Which the PIX cant handle..
I'm a loss at what to do here..
We got VPN users who cant surf now with these ACL problems.
What can I do? Anyone else encountered this?
We upgraded the VPN 3005 to the lastest SW version
Really need some help here guys!
Thanks

I don't think Cisco ever changed anything on the PIX. It uses subnet masks from day one AFAIK and VPN Conc uses wildcard masks like IOS. You can use the acl-netmask-convert command on the ASA to fix this issue. This way you define a willdcard ACL on the ACS/AAA server and then use this command on the ASA to use the same downloadable ACL for both devices (PIX,VPNC).
http://www.cisco.com/en/US/docs/security/asa/asa81/command/ref/a2.html#wp1622944
Please Rate if helpful.
Regards
Farrukh

Store procedure which get list of values separated by semicolon and return result set as a string semicolon separated string

Hello,
I am trying to make stored procedure in what i am getting i_group_id as a list of groups seprated by semicoln like 1,2,14,17,23.
And i want list of emails based on that group. And result set will be as a list of emails seprated by semicolon.
If you know how to install that in stored procedure please help me. Appreciate your help.
Thanks.
PROCEDURE get_groups_email(i_group_id    IN VARCHAR2,
                           x_group_email_dtl_cur OUT resultcur)
IS
x_group_email VARCHAR2(4000):=NULL;
BEGIN
   FOR i IN (SELECT   TRIM(emp.email) email
               FROM   ems.employee emp,
                      ems.groups_employee egrp
              WHERE   egrp.group_id IN (i_group_id)
                AND   emp.person_id = egrp.person_id) LOOP
    x_group_email:= x_group_email || i.email ||';';
END LOOP;
x_group_email := RTRIM(x_group_email,';');
   OPEN x_group_email_dtl_cur FOR
     SELECT   x_group_email
       FROM   DUAL;
DBMS_OUTPUT.PUT_LINE('x_group_email:' || x_group_email);
END get_groups_email;
PROCEDURE get_groups_email(i_group_id    IN VARCHAR2,
                           x_group_email_dtl_cur OUT resultcur)
IS
x_group_email VARCHAR2(4000):=NULL;
BEGIN
   FOR i IN (SELECT   TRIM(emp.email) email
               FROM   ems.employee emp,
                      ems.groups_employee egrp
              WHERE   egrp.group_id IN (i_group_id)
                AND   emp.person_id = egrp.person_id) LOOP
    x_group_email:= x_group_email || i.email ||';';
END LOOP;
x_group_email := RTRIM(x_group_email,';');
   OPEN x_group_email_dtl_cur FOR
     SELECT   x_group_email
       FROM   DUAL;
DBMS_OUTPUT.PUT_LINE('x_group_email:' || x_group_email);
END get_groups_email;

1013527 wrote:
I am using Oracle 9.7.2. Not 11g.
No Database at hand to provide a working example.
So use http://asktom.oracle.com/pls/apex/f?p=100:11:0::::P11_QUESTION_ID:73830657104020 to split your list into rows.
Join that to your table of e-mail addresses
then take a look at http://www.sqlsnippets.com/en/topic-11787.html maybe chosing http://www.sqlsnippets.com/en/topic-12087.html
and you're done.
Regards
Etbin
something to play with (still NOT TESTED!)
with
e_mails as
(select 1 user_id,'alpha' || chr(64) || 'domain.eu' e_mail from dual union all
select 2,'beta' || chr(64) || 'domain.eu' from dual union all
select 3,'gamma' || chr(64) || 'domain.eu' from dual union all
select 4,'delta' || chr(64) || 'domain.eu' from dual union all
select 5,'epsilon' || chr(64) || 'domain.eu' from dual union all
select 6,'zeta' || chr(64) || 'domain.eu' from dual union all
select 7,'eta' || chr(64) || 'domain.eu' from dual union all
select 8,'theta' || chr(64) || 'domain.eu' from dual union all
select 9,'iota' || chr(64) || 'domain.eu' from dual union all
select 10,'kappa' || chr(64) || 'domain.eu' from dual union all
select 11,'lambda' || chr(64) || 'domain.eu' from dual union all
select 12,'mu' || chr(64) || 'domain.eu' from dual union all
select 13,'nu' || chr(64) || 'domain.eu' from dual union all
select 14,'xi' || chr(64) || 'domain.eu' from dual union all
select 15,'omicron' || chr(64) || 'domain.eu' from dual union all
select 16,'pi' || chr(64) || 'domain.eu' from dual union all
select 17,'rho' || chr(64) || 'domain.eu' from dual union all
select 18,'sigma' || chr(64) || 'domain.eu' from dual union all
select 19,'tau' || chr(64) || 'domain.eu' from dual union all
select 20,'upsilon' || chr(64) || 'domain.eu' from dual union all
select 21,'phi' || chr(64) || 'domain.eu' from dual union all
select 22,'chi' || chr(64) || 'domain.eu' from dual union all
select 23,'psi' || chr(64) || 'domain.eu' from dual union all
select 24,'omega' || chr(64) || 'domain.eu' from dual
groups as
(select 1 g_id,'1,15,21,17' members from dual union all
select 2,'23,10,3,20,7,23,15,9' from dual union all
select 3,'3,4,5,6,7,8' from dual union all
select 4,'23,24,15,16,7,18' from dual
select g_id,
       substr(sys_connect_by_path(e_mail,';'),2) e_mail_list
from (select g.g_id,
               e.e_mail,
               row_number() over (partition by g.g_id order by e.user_id) rn
          from e_mails e,
               groups g
         where instr(','||g.members||',',','||to_char(e.user_id)||',') > 0
           and instr(','||:group_list||',',','||to_char(g.g_id)||',') > 0
where connect_by_isleaf = 1
start with rn = 1
connect by rn = prior rn + 1
        and g_id = prior g_id
Message was edited by: Etbin provided a small example

Store procedure which get list of values separated by semicolon and return result set as a string semicolon separated strin

Hello,
I am trying to make stored procedure in what i am getting i_group_id as a list of groups seprated by semicoln like 1,2,14,17,23.
And i want list of emails based on that group. And result set will be as a list of emails seprated by semicolon.
Can anybody please help me for that. Thanks in advance.
PROCEDURE get_groups_email(i_group_id    IN VARCHAR2,
                           x_group_email_dtl_cur OUT resultcur)
IS
x_group_email VARCHAR2(4000):=NULL;
BEGIN
   FOR i IN (SELECT   TRIM(emp.email) email
               FROM   ems.employee emp,
                      ems.groups_employee egrp
              WHERE   egrp.group_id IN (i_group_id)
                AND   emp.person_id = egrp.person_id) LOOP
    x_group_email:= x_group_email || i.email ||';';
END LOOP;
x_group_email := RTRIM(x_group_email,';');
   OPEN x_group_email_dtl_cur FOR
     SELECT   x_group_email
       FROM   DUAL;
DBMS_OUTPUT.PUT_LINE('x_group_email:' || x_group_email);
END get_groups_email;
PROCEDURE get_groups_email(i_group_id    IN VARCHAR2,
                           x_group_email_dtl_cur OUT resultcur)
IS
x_group_email VARCHAR2(4000):=NULL;
BEGIN
   FOR i IN (SELECT   TRIM(emp.email) email
               FROM   ems.employee emp,
                      ems.groups_employee egrp
              WHERE   egrp.group_id IN (i_group_id)
                AND   emp.person_id = egrp.person_id) LOOP
    x_group_email:= x_group_email || i.email ||';';
END LOOP;
x_group_email := RTRIM(x_group_email,';');
   OPEN x_group_email_dtl_cur FOR
     SELECT   x_group_email
       FROM   DUAL;
DBMS_OUTPUT.PUT_LINE('x_group_email:' || x_group_email);
END get_groups_email;

>
Can anybody please help me for that
>
Not in this forum they can't. This forum, as the title says, is for SQL Developer questions only.
Please mark this question ANSWERED and repost it in the SQL and PL/SQL forum
https://forums.oracle.com/community/developer/english/oracle_database/sql_and_pl_sql

Creating databases with dbca templates after upgrades and patches

I have a 10.2.0.1 base release Oracle Home. Over time it has been upgraded to 10.2.0.3 and quarterly security patches have been applied. Now I want to create a new database using a dbca (database configuration assistant) template.
During the 10.2.0.3 install did the templates also upgraded to include all the 10.2.0.3 stuff? Or are they still back at 10.2.0.1?
What about the quarterly CPU patches? Do they need to be applied to the new db after it is created?
Thanks,
Rob

I opened a Service Request. Here is the official answer from Oracle support.
QUESTION
=========
After applying the latest CPU(JAN2008CPU) I have created a new database using DBCA's seed template (General). Do I need to run the catcpu
.sql on the newly created database? Are the seed templates already updated with
the CPU?
ANSWER
=======
No, as these templates are not containing the Oracle binaries that is updated by the CPU.
Please let me know if you need further assistance regarding this issue and I will be glad to assist you further.
Otherwise please close this SR from MetaLink.
Thanks!
Greetings from Oracle,
Oracle Support Services

Adobe Acrobat no longer works on my Apple 10.5.8 after upgrading latest patch?

After my Apple 10.5.8 OS automatically downloaded the latest Adobe Acrobat the other day, (after I ok'd it), it no longer works at all, can't open any pdf's at all. It says the following:
The currently selected language resources are not supported by the current version of Adobe Acrobat. Please reselect the language in the International System Preferences panel. I have been to this panel and nothing is working???
Does anyone know what has happened here? Thank you

Try the Adobe Acrobat forum; this is the Reader one.
http://forums.adobe.com/community/acrobat

Problem after upgrade from patch level 36 to 43

Hi,
Recently our system is upgraded from 36 to 43 patch level. After this there are problem in doing hiring action, IT0000 is saving but the next infotype IT0001 does not gets saved and also no error message. So, really not able to figure out what could be the problem.
I was debugging the standard code i.e once the 'save' button is clicked in IT0001 in PA40, but in vain. I am not able to find out where or in which program/include the data gets saved in PA0001. If any one aware of this please let me know.
Since IT0001 is not getting saved, there are probs with IT0007 and IT0008.
Please let me know your views.
Thanks,
Arunsri

Hi Raju,
Thanks for the reply. Ya, the problem was not due to upgrade,but some other issue. Not able to find till now. I checked IGMOD features and it is in 'Active' mode only. No luck.
Edited by: Arunsri on Jan 27, 2012 4:18 PM

FRM-41830 :List of values contain Lov After upgrade Form patch set to 19

Similar Messages

Maybe you are looking for