Development of a program

Hi Experts,
I have to develop a new program.
below mentioned is the requirement.
can anybody help me please.
1.     Selection screen:
a.     Sales order number  - VBAP-VBELN (allow for range and to be able to upload from clip board)
b.     Sales order line item - VBAP-POSNR
2.     Before initiating the cancellation process; list all the requested sales orders with the following data.  This step will allow us to analyze the data again and make sure that no other sales order was added in error.
a.     Sales order number - VBAP-VBELN
b.     Sales order line item - VBAP-POSNR
c.     Material u2013 VBAP-MATNR
d.     Plant u2013 VBAP-WERKS
e.     Quantity u2013 VBAP-KWMENG
f.     Sales order document type - VBAK-AUART
g.     Create on date - VBAK-ERDAT
h.     Created by - VBAK-ERNAM
i.     Sales org. - VBAK-VKORG
j.     Distribution channel - VBAK-VTWEG
k.     Division - VBAK-SPART
l.     Sold to party - VBAK-KUNNR
m.     Shipping point u2013 VBAP-VSTEL
n.     Reason for rejection code - VBAP-ABGRU
3.     Allow the user to select which orders and line items are needed to be cancelled
a.     Add deselect all/select all button.
4.     Once the sales orders are selected, allow the user to select which reason for rejection code will be used.  The reason for rejection code selected will apply to all orders selected.  Reason for rejection code - VBAP-ABGRU
5.     Once the reason for rejection code is added, change the sales order to add the reason for rejection code to all the orders selected. 
a.     The sales orders that were not selected will be left alone and not changed.
b.     Keep track of any error messages returned.
6.     Provide a final output that gives any error messages received by the program
Thanks in advance.

Hi Sudheer,
  You have the complete requirement with you. Devolop the program. If you face any problem then give a poast in SDN. We can't give the whole code for you, but can help you in this if you have already done something.
This following link gives you the way to write your code in an optimized way:
http://www.sapbrainsonline.com/ARTICLES/TECHNICAL/optimization/optimization.html
Hope this helps you.
Regards,
Chandra Sekhar

Similar Messages

  • Developing a CDC program

    hi,
    i have a big problem when using the JavaPhone APIs ( like the Telephony classes ) in the Windows XP,im trying to solve this problem for a week but i cant resolve it till now.
    im using the WTK2.3, and when i import the javax.telephony package it tells me that it does not exsist, so i've downloaded the JavaPhone .class package and the .java package too, and i've pasted them in the WTK23/wtklib/emptyapi.zip, but the WTK still not recognize them, and the same sentence ( does not exsist ) is still appearing.
    so, please can you help me .. how could i develop a CDC program in the Windows platform and what programs i need to do it ... ???

    You can create your own 'MessageBox' class, by extending the AWT Dialog class.
    Send me an e-mail and I'll attach some code samples of how I implemented that type of class.

  • Tables for development class and program name

    Hi,
    IN which tables can we find the program name and its development class?
    Thanks,
    Kumar

    Hi Kumar,
       Check the Table TADIR.
    Regards,
    Swapna.
    Edited by: NagaSwapna Thota on Jul 9, 2008 10:41 AM

  • Developing Reverse Engineering Program -- JAVA to UML what needed

    Hi there,
    I am wondering why people want to develop reverse engineering?? it is useful? but developing the reverse Engineering sound interesting for me.
    Anyway I just intend to figure out how to develop a reverse Engineering program FROM java to UML diagram. Which create Use cases, class and sequence diagram. Is that possible??
    what kinds of Knowledge I need to know in order to develop reverse Engineering. Is there any tutorial that can teach me on how the Reverse Enginneering works?
    Does Reverse Enginneering check words by words in order to develop the program?
    That all...

    Hi,
    You need a parser, like ANTLR, plus a java grammar for that parser (antlr has one). You need a uml model implementation like MDR, EMF or the obsolete NSUML. You need a diagramming library like GEF or JGraph. With those 3 components you could build your own r.e. tool. search google for urls.
    you're interested in the subject so try to read http://citeseer.nj.nec.com/545406.html and related papers.
    you'll need to understand the java language specification (java.sun.com), JSR26 (jcp.org) [a std mapping from java to uml], and the uml metamodel (download the specification from www.omg.org).
    many reverse engineering scenarios are possible, although not all tools have found time to implement them.
    eg. java class -> class diagram
    java method -> sequence diagram
    I don't know of any tutorials. But you could look at the implementation of ArgoUml (argouml.tigris.org) and ask questions on the developer mailing list.
    That should keep you busy for the rest of the year...

  • Cocoa,mac-app development,objective-c programming books

    I have knowledge of C language and little bit of object oriented programming using Java.
    Recommend me some books for the topics that I want to learn are given below:
    1. Objective-C language learning course.
    2. Cocoa Programming using XCode 4
    Please recommend books that are readily available in India.
    Books that you recommend should have comprehensive knowledge of each topic. 
    P.S- I have gone through some of the pages at developer.apple.com on topics like objective-c.Still I require some more knowledge through books.

    If you're new to iPhone development, then you should definitely read this first:
    My First iPhone App, a Programming Tutorial.
    In a nutshell if you want to develop for the iPhone:
    You need a Mac Computer of some kind, Mac Mini, iMac, MacBook etc. You cannot develop for the App Store on a Windows or Linux PC.
    Join the Free iPhone Developers Program. This gives access to the SDK and Xcode development system which you download and install. It includes an emulator so you can test most apps except those which need hardware such as the camera or GPS.
    Pay $99 a year for access to the developer program. This lets you install apps on your own iPhone/iPod Touch/iPad. It also gives earlier access to betas and past versions of the SDK.
    Development Process
    So you've been developing away and have got a version that runs in the emulator. Next you've paid your $99 and been accepted in the developer's program. This means you can now try your app out on your iPhone. Here is an overview of how you do that. Apple's developer website provides a lot more detail.

  • How to develop a setup program!

    Hi all,
    You all must have seen the setup program of
    jdkx.x.x , and how it installs java in our program.
    'was just feeling inquisitive how to prepare such
    programs, which will install some program in the
    system, along with user interface!!!
    any highlight is welcomed.
    thanks.

    Hi,
    try to look for InstallShield JAVA Edition. Especially Prof version.
    Regards, Alex.

  • Developing Urdu language program (non-English)

    Hi,
    I want to develop a small application using MIDP 2.0 that will be in Urdu language in addition to English. Can somebody point me in right direction as to how to do that?
    Plus I want to know if this is something which is device dependent i.e. it may work on some devices and may not work on some?
    Thanks

    Hi Friend,
    please refer to nokia.forum localization
    Hopefully it will meet ur req.
    [email protected]

  • How to use CooCox software(C​oBuilder+C​oDebugger+​CoFlash) to develop applicatio​n program using

    1、Install JAVA platform and GCC compiler.
    eg:
    jdk-6u2-windows-i586-p.exe
    arm-2009q3-68-arm-none-eabi.exe
    website:
    https://cds.sun.com/is-bin/INTERSHOP.enfinity/WFS/​CDS-CDS_Developer-Site/en_US/
    -/USD/ViewProductDetail-Start?ProductRef=jre-6u16-​oth-JPR@CDS-CDS_Developer
    http://www.codesourcery.com/sgpp/lite/arm/portal/r​elease1033
    2、Download CoBuilder,CoDebugger,CoFlash and Colink Plugin.(four packages).
    3、Using CoBuilder create project and build it.
    4、Download the bin file to the target by using colink and coflash.
      Note:using coflash to download the bin file,you must in Command Line mode.
    5、Then,you can debug the project using CoDebugger.(open the CoDebugger,import the project you
    created just now, and debug it)
    www.coocox.org

           Yes. They are all developed by Eclipse.
           CoBuilder provides a completely free and highly automatical integrated development environment for the application based on ARM Cortex M3. It integrates plenty of drivers and components for users, so users can fully concentrate on the development of application software.
           It support devices:
    ATMEL
    ST
    NXP
    Luminary
     AT91SAM3U4E   AT91SAM3U4C   AT91SAM3U2E   AT91SAM3U2C   AT91SAM3U1E   AT91SAM3U1C
    STM32F103VB,STM32F103V8 STM32F103T8, STM32F103RB STM32F103R8,STM32F103CB
    STM32F103C8
    LPC1768, LPC1766 LPC1765, LPC1764 LPC1758, LPC1756 LPC1754, LPC1752
    LPC1751
    LM3S811 LM3S8962 LM3S9B96
    www.coocox.org

  • Does anybody has the code for developping multi-process program .thank you.

    I want to run two instance of the same program ,the motive is to access the same data-base at the same time.
    I set the database evironment with the flag of DB_INIT_TXN | DB_RECOVER | DB_INIT_LOCK,but the one instance
    can't see the modification as the other one has modified the database .

    problem has been solved .
    improper flag for DbEnv::Open() is the ring-leader :
    newly set flag :
    #define DEFAULT_EVIRONMENT (DB_CREATE | DB_INIT_LOG | DB_INIT_MPOOL | DB_THREAD | DB_REGISTER)
    former flag :
    #define DEFAULT_EVIRONMENT (DB_CREATE | DB_INIT_LOG | DB_INIT_MPOOL | DB_THREAD | DB_PRIVATE)

  • Development class for program RFIDESM340 ( Model 340 )

    Hello everyone ,
    I have implemented all the notes pertaining to Model 340 .
    I have a doubt regarding the development class for report  RFIDESM340 .
    In the system the development class for report  RFIDESM340   is ' BUPA_TAX ' .
    I want to confirm if this is the right one or should we change the development class to ' ID-FI-ES '.
    Thanks ,
    Lalitha Iyer .

    Hola Eduardo!
    La clave de operacion ya está parametrizada en la tabla ES340_OPRKEY.Este no es el problema.
    Lo que necesitamos es poder incluir dos Tipos de libros .
    El estándar de sap solo saca dos tipos de libros
    Libro de facturas expedidas.
    Libro de facturas recibidas.
    que están identificados en el reporte con las claves de tipo de libro E y R.
    Necesitamos que el reporte obtenga tambien los libros de
    Libro de determinadas operaciones intracomunitarias.
    Libro de bienes de inversión.
    Cuyas claves de tipo de libro son: U y S
    Estas claves No tienen nada que ver con la clave de operacion.
    Este es un requerimiento a la hora de presentar el reporte y SAP no  aporta solucion.

  • Do I need Developer studio (C++ programming language) in my computer when I call a dll through my labview?

    Thanks in advance...
    Solved!
    Go to Solution.

    yemin wrote:
        Thank you Rolf and  smercurio_fc 
        My C++ code has many inputs and I am going to get different results ( pressure-temp-friction etc). I am looking at call library function and I couldnt add more than one "return type" . Do I need to name parameters like return type 1, 2, 3 etc... Do you have an idea, how can i get more than one return result? 
    A C function can have only one return value. This is a C limitation, not a LabVIEW limitation. What's sometimes done in this case is to have these additional values "returned" as function arguments. You pass in a pointer to a value of the appropriate data type, and the function will write the new value to that memory location. If you don't know what that means, then I'd suggest spending some time with C tutorials.
        Also, when i run my c++ code, I can get all results in a notepad file.... In labview when I run the dll, how can i create that kind of file in the computer to store my run's result?
    As noted, you can use Write to Text File. Or, you can use Write Spreadsheet File to create a delimited text file that can be easily imported into a spreadsheet application such as Excel. Or, you can use the Write to Measurement File VI if you want extra formatting at the beginning.
       Thank you again, I am very beginner at Labview.....
    We were all beginners at one point. To learn more about LabVIEW it is recommended that you go through the introduction material, tutorial(s), and other material in the NI Developer Zone's Learning Center which provides links to other materials and other tutorials. You can also take the online courses for free.

  • Is ICQ developed by Java Program??

    if it's right,what network programs are used?(TCP/Http/UDP)
    Also,how can it(icq program) cope with a large amount of its user?
    thank..

    if it's right,Probably not... it's a protocol, as said, so wouldn't matter what language.
    what network programs areused?(TCP/Http/UDP)These are not programs. It's probably using TCP as the connection protocol, but that has nothing to do with the protocol of the content. TCP and UDP are ways to make connections, HTTP is a "language" protocol. HTTP is a language spoken over a TCP connection, for example.
    Also,how can it(icq program) cope with a large amount
    of its user?Big servers.

  • Develop a report program

    How to get  tcode  users and its authorization,restrictions
    Moderator message : Search for available information, thread locked.
    Edited by: Vinod Kumar on Nov 10, 2011 11:06 AM

    Hi,
    are you asking for a Reporting Services Report? You can find this information in Reporting DB (2010) resp. schema dbo for reporting (2013).
    Here a simple query:
    SELECT PROJ.ProjectName
    , ISSUE.Title AS Issue
    , RISK.Title AS Risk
    FROM dbo.MSP_EpmProject_UserView AS PROJ
    LEFT OUTER JOIN dbo.MSP_WssIssue_OlapView AS ISSUE ON PROJ.ProjectUID = Issue.ProjectUID
    LEFT OUTER JOIN dbo.MSP_WssRisk_OlapView AS RISK ON RISK.ProjectUID = PROJ.ProjectUID
    Or are you looking for something different?
    Regards
    Barbara
    To increase the value of this forum, please mark the replies that helped to solve your issue as answer. If you find answers to questions from other forum participants to be helpful, please mark them as helpful. Your participation will help others to find
    an appropriate solution faster. Thanks for your support!

  • Which Java Version to develop Java-XML Programs

    Hello,
    I was wondering if someone could help me figure out which java bundle to download to be able to compile and run java files using the XML parser classes, and also, do I need any third party api's or somthing to use SAX and DOM.
    Sincerely
    Fredrik G�rander

    do I need any third party api's or somthing to use SAX and DOMSince it doesn't come with Java you are going to need something.
    I would suggest finding that first and then getting the jdk/jre that matches the version that it requires.

  • HT4910 Am I able to backup and restore document files developed in microsoft programs (eg excel & word) to icloud??

    Am I able to backup  & restore microsoft excel & word files from my PC onto iCloud??

    iCloud only backs up mobile devices not computers.
    Allan

Maybe you are looking for