Development Request on Financials Report in VND Currency - Money Overflow

Dear all,
In Vietnam, customer uses VND currency and encountered the issues when generating financial report with big amount. Generating T/B or G/L with long period or large amount would come with the error: "Error while running report due to money overflow; one or more amounts generated are inaccurate".
There was a note provided by SAP note was since 2009, and there is no fix yet until now u2013 2012 (3years) (SAP Note: [1247215 |https://websmp230.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3030303132343732313526]).
In case of these issues, customer cannot get reports from SAP and must switch to MS Reporting Service web report provided by us.
Actually customer had some transaction amounts around VND 6,000,000,000,000 and accumulated amount in report was greater than VND 9,223,372,036,854 mentioned on the Note 1247215. And some customers in financial services or petro fields we should consulate to use thousand VND instead to reduce digits when posting.
Could SAP increase one or more digits on SAP B1 to adapt to Vietnam?
Thanks,
Doan

Dear Doan,
I am afraid using 1,000 VND as the unit should be your solution. I doubt 1 - x00 VND can buy any goods.
B1 is global system used by hundreds of countries. Unless you can represent majority need. no one may sacrifice the other to meet one localization need.
Thanks,
Gordon

Similar Messages

  • Request for sample reports developed using report designer

    Hi All,
    Request for sample reports developed using report designer.
    Thanks

    Ramesh,
    right now there really is no way to solve what you are looking for.  There partial solutions, but you will not be able to force a page break in a dynamic report.
    Here is what I have faced, and what I have come up with so far:
    I have a series of reports that have the same column heading, but spread over 5 pages in a fixed structure.  I need to be able to re-use the header and the general report design with 6 reports.  Here is my solution:
    1. Create an outline of the report.  I did all the formatting by creating a report section for each page.  You can force page breaks between the pages.  Upgrade to patch 1502 (came out last week) and you will see some new functionality (such as fit to page, page numbers, etc).
    2. Insert all you page breaks and do all the formatting.
    3. Insert an infoprovider.  Once in, you can just drag and drop the key figure cells into your formatted report.
    4. Create additional modification for formatting as needed.
    This fixes my problem (for now), but I had to do a lot of work to come up with this.  Also, the latest patch (1501 and 1502) has created an issue for me - there is a null exception when I try to use a variable or a filter value in the report body - I can't save the report.  I have an OSS message out, but our BASIS guys are going to be taking the lead on troubleshooting this.
    The reason that you are seeing some customers on the new pages is probably because of "how the cookie falls" - they just fit that way.
    I am trying to be positive and overcome the limitations that are in place right now. If my technical issue is solved, I would recommend upgrading to the new patch (1403 is the latest stable one in my opinion)
    good luck
    Pavel

  • Report with Transaction currencies

    Hi All.
    i am in the process of developing a report in project systems with my developer.
    The scanerio is investment projects (all internal projects) . Exchange rate type P is defined and is uploaded one in an year.
    We have been using budgets in different currencies. So, a project is budgeted in 3-4 curriencies at differenct WBS levels and is posted with many currencies. As of now its working fine ...........................now the requirement of the client is , he need a report in transaction currencies.
    So, a WBS many be budgeted in one currency, but might be posted in different currencies. So for one WBS, we might have 4-5 currencies existing. Now a report need to be developed.
    Is this possible? any suggestions from your end?

    Hi Surya,
    You need to explain your client the transaction curr report will be meaningless when time comes to give a total for the columns. They need to go with either object or controlling area currency to make some sense out of these figures.
    I hope it helps,
    Regards,
    Dave

  • Find workbench request for existing report

    Hi
    Someone created an Report for me in order to develop some new functionalities.i have to transport it now in the test system but i do not know how i can find the workbench request for it or how i can save it in another workbench request.
    thanks

    Hi Seba ,
    You can find the workbench request for the report by displaying the report and following this path in the menubar.
    Utilities > version > version management.
    If you want to add this request into another request goto SE01 and there you will find the icon for adding the objects for your request.
    Regards,
    Anuj

  • How to submit a concurrent request from Discoverer report.

    I would like to know If any one has tried submitting a concurrent request from Discoverer Report?_
    This is no stupid question, but our team here finally decided with a solution to our long pending issues with few of the discoverer report. To Proceed further, we would like to know, how to submit a concurrent request from Discoverer report?
    We are looking for calling a package from the Disco admin by passing the parameters from the disco to the 6i report.
    All help us in this regards are much appreciated.
    Kindly help us in the same!
    Thanks
    Arun

    Thanks Rod for confirming the same.
    I will be trying the same today and will let you know if I succeed in doing it.
    If I can share the actual requirement with you, it goes like this.
    "I will be triggering the Oracle 6i standard AP Trail balance report through the Disco report. The standard report will be inserting the required data to one of my custom table. Once the concurrent program completes normal, my custom table will be having the required data to create the workbook specific to the current run of the concurrent program.
    The one problem which I think could happen is, How can I make my disco report to wait till the standard program to complete in normal so that my disco report can be generated with the data from custom table.
    Will the above requirement is possible If I follow the way you mention in the PDF or Could you suggest a better way for achieving the same.
    In short, my requirement is: The custom table(say XX_TABLE) will be populated with data when the standard 6i report is run and the disco admin will be making of the custom table (XX_TABLE) to generate the report.
    Please advice.
    Thanks
    Arun

  • Need Help to develop a Funnel Graph Report using Multiple Subject Areas.

    Hi Everybody,
    Did any body developed Funnel based graph report in Answers..
    Scenario: I need to develop a report which is based on 4 Facts(4 Subject Areas) Report is sectioned with 4 block one blovk with one Fact Metrics like this four blocks.
    If any idea on such scenario it will be huge benefit for me.
    Thanks in advance.
    Thanks,
    Govardhana

    Yes, i can see datatype and number of columns is same in both queries.
    i have challanges to copy message but Error message seems to general. Error says (near to FROM) and I checked there are three FROM in query and all seems to be ok
    Query is something like as below
    select SA1.col1 saw_0,
    SA1.col2 saw_1,
    SA2.col1 saw_2,
    SA2.col2 saw_3,
    FROM
    (select col1 saw_0, col2 saw_1 from "subject area1") SA1
    FULL OUTER JOIN
    (select col1 saw_0, col2 saw_1 from "subject area2") SA2
    ON SA1.col1 = SA2.col1
    I can't see any issue in the query...please comment.

  • Cost budget report in local currency

    Hello all,
    I would like to use a statistical project to link maintenance costs to a budget that is maintained in PS. The functionality is all there. i'm now trying to find a proper report.
    Currently I'm doubting between 2 options:
    Option 1:
    CJ30: budgetting in object currency
    CJE0: reporting in Controling area currency. Translate to certain currency.
    Problem: This always leeds to conversion issues:
    budgetted 10000 ---> report shows 9940.
    actual cost: 9000 -
    > report shows 8340
    Option 2:
    CJ40 for planning on costelement level
    S_ALR_87013543 in object currency
    Problem: CJ40 is planned in Controling area currency
    What I want is the following:
    CJ30 or CJ40 in object currency
    Report in object currency where.
    Does anybody have an idea how to handle this?
    thanks in advance,
    Peter

    NAG,
    Thanks for your help. I have copied a standard hierarichal report and i'm now trying to add object currency as a key.
    I have added the selection characteristic object currency in the characteristic tab, but that's not working. Ca you maybe gvie some more specific tips or if you have a certain link where i can find more details about configuration of a report?

  • Report in diffrent currency- internal Order

    Hi,
    I have created internal order,  and by using KPF 6 to put the phased budgets in GBP Currency into the system, when i use report “s_alr_87012993 – Orders: Actual/ Plan/Variance report”  the report is showing in EUR (Which is controlling area currency).
    Can you please let me know how can I extract the report in the currency which was entered (GBP)? 
    Regards

    Unfortunately there is no report for internal orders, which gives plan data in object / transaction currency. Plan data is reported in controlling area currency.
    To take care of your requirement you will have to create a report using report painter, which will give you plan data in object currency.
    The method suggested by JeCcas_DJ will not give origanal plan amounts but will give you translation.
    Regards
    Rakesh Pawaskar
    Message was edited by:
            Rakesh Pawaskar

  • Best way to develop a BI Publisher Report

    Dear All,
    which is the best way to develop a XML/BI publisher report?
    1) Using a RDF for fetching data using data group
    2) Using a Data Template
    3) Writing PLSQL code
    4) Using BI Publisher Enterprise
    In R12 , all seeded reports are XML using PLSQL coding. Why oracle did not create RDF based XML reports? Are RDF s going to be obsolete??
    Please clear my confusion
    Thanks in Advance
    Raj

    Pl see your duplicate post here - Best way to develop a BI Publisher Report
    Srini

  • How to develop a group above report in mailing lable style

    i want to know the method to develop a group above report (multi level groups) in mailing lable style like yellow pages on reports 6i e.g.
    group 1: country
    group 2: province
    group 3: Industry
    group 4: product or service
    mailing lable: Company Name
    Address
    Contact No
    I will highly appreciate if someone can help in this regard
    M. Imran Shahzad
    [email protected]

    Post Author: V361
    CA Forum: Formula
    I am slightly confused, but perhaps you can create a formula
    Then group on the formula.  If this is not what you want, could you post some sample data, with the desired results.

  • Problem with Inventory stock audit Report in other currency

    Hi I have a problem with Inventory stock audit, the SBO show me the report in local currency, and I have to obtain that report in other currency, I was working with OINM table, but I don't know how obtain the report

    Alberto,
    Other currency information is available at the document row level and in the Journal Entries.
    What you could do is join the OINM with the associated document and let the foriegn currency value.
    OINM.TransType = ObjType (marketing document)
    OINM.BASE_REF .......Document Ref
    OINM.DocLineNum ......LineNum
    Suda

  • Cost Center Report in Object Currency

    Hi there,
    Any idea if it is possible to display the SAP standard Cost Center Reports in object currency instead of controlling area currency.
    Thank you.

    Hi there,
    Thanks for the reply. What about the SAP Standard report, i.e., S_ALR_87013611 - Cost Centers: Actual/Plan/Variance ?
    How can we have the object currency displayed?
    Pls advise.
    Thank you.

  • Bank Reconcilliation Report in Foreign Currency

    Hi,
    We are on SAP B1 8.8 PL4.
    Please advise on how to get/print the bank reconciliation report in foreign currency.
    The current report (Reports-Banking-External Reconcilliation-Bank Reconcilliation report) only allows printing of the report in the local currency.
    Kind Regards,
    Asif

    Hi Asif,
    In the latest B1 version, you can have External Reconciliation By Summary (FC). Check if you have the same option. If not, you need to create your own or upgrade to the latest version.
    Thanks,
    Gordon

  • Show report in different currency depending on user parameter

    hi all,
    i'm trying to show my report in different currency, depending on users given parameter.
    i hold my account balance in USD based. User should select one parameter, in which currency they want to see their account balance. (e.g. EURO, GBP ...) and depending on their selection, i want to convert USD based info into chosen currency, by fetching field from currency table and making some calculation.
    also i want to include in report currency($, £ ...) accordingly ().
    how can i achieve this, has somebody any suggestion to me?
    thanks in advance.
    bogi.

    hi,
    i think i need to explain my problem more detailed. anyone who has suggestion, please help me.
    i have 3 tables account, times and currency.
    - times table has time_key, date, day_of_week fields.
    - account table has - account_balance and time_key_FK fields.
    - currency table has currency_type, amount, time_key_FK fields.
    1. i have function decode(:Currency,'USD',account_balance,'EURO',--here i want to replace my calculation CALC1---)
    CALC1- this calculation need to some calculation like this: account_balance * (fetched field from this sql)(select amount from currency, account where currency.currency_type='EURO' and account.time_key_FK=currency.time_key_FK)
    i tried to do this, but discoverer plus doesn't let me make condition and calc. i'm very confused.
    2. after i achieve this query, somehow i want to display on worksheet on which currency is it based. can i get parameter value, and show this value as in column heading?
    tnx!!!

  • Display Report in Object currency

    Hi all,
    Report created by report painter, object currency(EUR), but report shows the values in controlling area currency(SEK).How can the values be seen in object currency in the report?
    Thank you.

    If it is a cost element report, then you can set the object currency as default in RPP0. If it is heirarchy reports, then you can use Settings>Currency inside the report, but you have to mention the currency here.

Maybe you are looking for

  • Project Web App (PWA)/Sharepoint 2013: is there any way to display two different views of the Project Center PWA web part to the same user in a site collection?

    i want some of my users to see all the projects in the Project Center at my top-level site, and those same users to see only the projects they own at a subsite level in Project Center. that way they could see an 'all project' view on the homepage and

  • Looking for a specific iOS App

    I need to figure out what an iOS app is based on its icon. It is what looks like a white flower in front of a purple background. It's one of the ones on the mobile in the front window of the apple store. PLEASE HELP! I need to figure out what this ap

  • How can i view the variables of the session memory

    Hi experts    How can i view the variables of the session memory.Such as I want display the variables of memory which id is 'BULRN' in ABAP debug. In program i can use import from memory id visit the momery of session,but i don't know the name of var

  • How to write ascii extended codes?

    I�m making an application that read from a serial port and write to a file. But I having problems with the extended ascii codes. I have all the data in a ByteBuffer and when I wrote to a file I lose all the accebtuated vowels. an example byte[] b = n

  • NetService seem so simple - but I'm hosed

    I've looked at dozens of examples that all use about the same code for connecting to a cold fusion cfc in AS3. The service works fine in AS2, but fails in my ported code. I can't event get the URL to work, as per the examples. CF code is in a cfc cal