DHCP and SMB service failing

We have a X server with 10.5.5 installed.
This server is our main server with active settings for OD, SMB, DNS, DHCP and AFP.
At variable intervals the DHCP and SMB service gets corrupt.
here's excerpt from the server log:
Nov 15 04:19:59 FileServer servermgrd[54]: pipe(status) error: 24
Nov 15 04:19:59 FileServer servermgrd[54]: servermgrd: readFile File /etc/ipfilter/ipaddressgroups.plist is not a valid plist
Nov 15 04:19:59 FileServer servermgrd[54]: Exception in doCommand: couldn't spawn task: path = /usr/sbin/sso_util, errno 24
Nov 15 04:19:59 FileServer Server Admin[81743]: * -[ServiceEntry sessionHost]: unrecognized selector sent to instance 0x2a9040
Nov 15 04:20:29: --- last message repeated 1 time ---
Nov 15 04:23:30 FileServer servermgrd[54]: pipe(stdout) error: 24
Nov 15 04:23:30 FileServer servermgrd[54]: Exception in doCommand: couldn't spawn task: path = /usr/bin/smbstatus, errno 24
Nov 15 04:24:08 FileServer servermgrd[54]: pipe(stdout) error: 24
Nov 15 04:24:08 FileServer servermgrd[54]: Exception in doCommand: couldn't spawn task: path = /usr/bin/smbstatus, errno 24
Nov 15 04:24:08 FileServer servermgrd[54]: pipe(status) error: 24
Nov 15 04:24:08 FileServer servermgrd[54]: Exception in doCommand: couldn't spawn task: path = /usr/bin/smbstatus, errno 24
Now this only happens when we leave the server admin app open on the specific server.
If we close the application the server seems to be working fine (for at least 3 weeks...).
We even reinstalled the server from scratch, but this problem is persistent...
Is this a bug en the Server Admin app?

Hi
Get into the habit of not leaving either of the two applications (Server Admin and WorkGroup Manager) open. Especially Server Admin. When you've done with the application quit out of it. If you can develop your command line skills (man serveradmin is useful), try and use these where possible instead. Best advice I can give you.
If your server is not configured as Advanced please ignore this advice.
Tony

Similar Messages

Non-ISP DDNS with Apple DHCP and DNS Services

I have two questions about Dynamic DNS (DDNS) as it applies to Apple's DNS and DHCP services within my home network. I am not talking about DDNS in the context of making my external-facing router available by a domain name on the Internet using the dynamically-assigned IP from my ISP.
Starting with Snow Leopard Server, I attempted to use Apple's DNS and DHCP services (I have the firmware-based DHCP service in my router turned off.) The difficulty I immediately faced was that Apple's DHCP implementation didn't update the DNS service as IPs were handed out to DHCP clients. Because of this, it wasn't possible to access hosts by their hostname, since getting a DHCP-assigned dynamic IP at boot-up didn't do anything to automagically register the hostname-to-IP mapping in DNS. Manually registering the hostname in DNS was pointless, becuase over time the client IP address can and did change. I could create static IP assignments based on the MAC address, but doing that for all of the devices on my home network sort of defeated the purpose of using dynamic IPs.
The only solution I eventually found was to go out and get an open source DHCP server, compile it for my Mac, install it, and configure it. After doing this, everything worked great; every time a new host or other device was booted it got a dynamic IP through DHCP, and then the DHCP server automatically updated Apple's DNS serive with the hostname and assigned IP. I could immediately access every device on my network by hostname. As IP addresses changed over time, the hostname-to-IP mapping in DNS was automatically updated.
Except, Apple's point upgrades kept breaking my non-Apple DHCP install. Every time I applied software updates to my server I had to go back and re-finagle DHCP to get it to automatically start and run. By the time Lion Server came out, I drank the Kool-Aid and went back to Apple's DHCP implementation. I was disappointed that it still didn't seem able to update DNS with hostnames as it assigned IPs, but I was so tired of mucking about at the command prompt to fix DHCP every time Software Updates broke it, I just lived with the inconvenience of not being able to access devices on my network by hostname.
I'm sorry to say this, but Windows Server has had this capability since at least server 2003. In fact, until I dumped my Windows Server and switched to Snow Leopard Server, I was running Microsoft's DNS and DHCP services on Server 2003 and they did exactly what I'm describing brilliantly.
Can anyone offer any advice here? Does Mountain Lion's implementation of DHCP allow for DDNS updates to the DNS service? If not, how are other people handling this? Should I go back to running Windows Server for my DNS and DHCP services? My Netgear WNDR3700 router appears to have the standard, substandard DHCP server in firmware as most home routers, and no facility for DNS at all--much less the ability to update an on-site DNS sever with IP addresess it hands out. In fact, the only appliance I know of that does this is the InfoBlox my employer uses, but that's too expensive for a home solution.
As a Post Script, I'll add that I've been VERY unhappy that I lost the ability to bind Windows clients to Open Directory under Lion Server. Since I'm starting to see articles that say this capability hasn't been added back to Mountain Lion Server, I'm seriously considering implementing a Windows Server AD master and establishing a "magic triangle" or "golden triangle". If I end up having to do that, I wonder if I might as well just go back to using Microsoft's DNS and DHCP services.

Hi,
Whether to move your DHCP to another server depends on the workload of your server. If there are too many clients on the network, you should move your DHCP to another server.
Did the record which owned by the machine generate before you configure the DnsUpdateProxy group? You can try to regenerate the record and check the result.
For more detailed information, you can view the link below.
DNS best practices
http://technet.microsoft.com/en-us/library/cc778439(v=ws.10).aspx
Using DNS servers with DHCP
http://technet.microsoft.com/en-us/library/cc787034(v=ws.10).aspx
DNS registration changes for Windows Server 2003 based DHCP Servers
http://technet.microsoft.com/en-us/library/ee441167(v=ws.10).aspx
Hope this helps.
Steven Lee
TechNet Community Support

[Solved] Mismatch on GID and shadow.service fails

Hi, randomly the shadow.service fails on loading and it gives me this output:
$ systemctl status shadow.service
● shadow.service - Verify integrity of password and group files
Loaded: loaded (/usr/lib/systemd/system/shadow.service; static; vendor preset: disabled)
Active: failed (Result: exit-code) since sab 2015-03-28 14:54:50 CET; 13min ago
Process: 1988 ExecStart=/usr/bin/pwck -r (code=exited, status=2)
Main PID: 1988 (code=exited, status=2)
mar 28 14:54:50 vivopicenin pwck[1988]: user 'git': no group 999
mar 28 14:54:50 vivopicenin pwck[1988]: user 'systemd-journal-remote': no group 998
mar 28 14:54:50 vivopicenin pwck[1988]: user 'systemd-journal-upload': no group 997
mar 28 14:54:50 vivopicenin pwck[1988]: user 'sddm': no group 996
mar 28 14:54:50 vivopicenin pwck[1988]: user 'rtkit': no group 133
mar 28 14:54:50 vivopicenin pwck[1988]: pwck: nessuna modifica
mar 28 14:54:50 vivopicenin systemd[1]: shadow.service: main process exited, code=exited, status=2/INVALIDARGUMENT
mar 28 14:54:50 vivopicenin systemd[1]: Failed to start Verify integrity of password and group files.
mar 28 14:54:50 vivopicenin systemd[1]: Unit shadow.service entered failed state.
mar 28 14:54:50 vivopicenin systemd[1]: shadow.service failed.
The output instead of pwck is:
$ sudo pwck
user 'polkitd': no group 102
user 'avahi': no group 84
user 'colord': no group 124
user 'git': no group 999
user 'systemd-journal-remote': no group 998
user 'systemd-journal-upload': no group 997
user 'sddm': no group 996
user 'rtkit': no group 133
pwck: nessuna modifica
So for example for sddm group it requires a 996 GID, but on my /etc/group file i have this content:
$ cat /etc/group
root:x:0:root
bin:x:1:root,bin,daemon
daemon:x:2:root,bin,daemon
sys:x:3:root,bin
adm:x:4:root,daemon
tty:x:5:
disk:x:6:root
lp:x:7:daemon
mem:x:8:
kmem:x:9:
wheel:x:10:root,marco
ftp:x:11:
mail:x:12:
uucp:x:14:
log:x:19:root
utmp:x:20:
locate:x:21:
rfkill:x:24:
smmsp:x:25:
proc:x:26:
http:x:33:
games:x:50:
lock:x:54:
uuidd:x:68:
dbus:x:81:
network:x:90:
video:x:91:
audio:x:92:
optical:x:93:
floppy:x:94:
storage:x:95:
scanner:x:96:
input:x:97:
power:x:98:
nobody:x:99:
users:x:100:
systemd-journal:x:190:
systemd-journal-gateway:x:191:
systemd-timesync:x:192:
systemd-network:x:193:
systemd-bus-proxy:x:194:
systemd-resolve:x:195:
systemd-journal-upload:x:994:
systemd-journal-remote:x:995:
ntp:x:87:
mysql:x:89:
git:x:993:
usbmux:x:140:
vboxusers:x:108:
sddm:x:992:
There are some mismatches, for example on sddm group which requires 996 GID but on my system i have GID 992.
What should i do in oder to fix it?
Thanks!
P.s. sudo gpwck gives me no output and i don't have any .pacnew on my system.
Last edited by toketin (2015-03-29 17:18:03)

Hi thanks for the reply, i've fixed fot the half of the groups' errors, for the others it gives me that the group X doesn't exist. This the output:
# groupmod --gid 102 polkitd
groupmod: group 'polkitd' does not exist
# groupmod --gid 84 avahi
groupmod: group 'avahi' does not exist
# groupmod --gid 124 colord
groupmod: group 'colord' does not exist
# groupmod --gid 133 rtkit
groupmod: group 'rtkit' does not exist
I had tried to re-install yesterday for example git and sddm packages but it didn't fix the issue.
Last edited by toketin (2015-03-29 12:38:01)

What is the difference between SmartNet and SMBS service level

Good Afternoon
I would like to ask if what is the difference between Cisco's SmartNet and Cisco's SMBS service level?
Thank you

Hi Rey,
SMARtnet covers traditional Cisco products (enterprise products ie. ISR routers), Small Business Support Center covers the small business line.
In the UC group of products, for some reason, Cisco considers the UC520, AP521, and WLC526 which are branded small business to be traditional Cisco products and are covered under SMARTnet. But, the UC540 and UC560 are covered by SBSC. One major difference in the UC arena is the support for CLI vs CCA config.
However, I noticed your post was in the Small Business - switches category. If you have a small business switch those are covered by SBSC not TAC. SBSC will support the CLI and web gui config of the small business switches, where CLI is applicable to the model.
SBSC contracts tend to be for 3 year periods and can be significantly less expensive than SMARTnet agreements.
Hope that helps.
Best,
David
Please rate helpful posts and identify correct answers.

Solaris 10 x86 u5 dhcp and jumpstart install fail

hello
I have problem in solaris 10 u5 jumpstart install.
I can use jumpstart install with dhcp and get a static ip address (assigned by dhcp server) before solaris 10 u3.
But now I can't use jumpstart install in solaris 10 u5 without setting up a static ip address in sysidcfg.
I have many x86 machines.
If I have to set up every different sysidcfg for every machine when I install a new machine.
I will get into big trouble.
here is my sysidcfg
###### sysidcfg #######
system_locale=en_US
timeserver=localhost
timezone=Asia/Taipei
terminal=sun-color
security_policy=NONE
root_password=xxxxxxxx
nfs4_domain=example.com
network_interface=primary { hostname=solaris
default_route=192.168.100.254
netmask=255.255.255.0
protocol_ipv6=no}
name_service=DNS {domain_name=example.com
name_server=192.168.100.1
search=example.com}
Edited by: cheung79 on 2008/4/19 ?? 5:29

I think that you should modify the script discovery-install, so you'll be able to create the sysidcfg file dynamically. I had the same problem as you and there is a possibility to add some arguments to the boot command that you execute at the ok prompt. These arguments can be defined in the discovery-install script. It's quite easy.
Regards,
Przemek

Cannot log into CMS and all services fail to load on installation.

A trial version of Crystal Server XI r2 was installed due to problems with the license key for our purchased version of XI. The r2 has since expired and I have uninstalled it. I have now tried to install XI several times, but I am having a problem with the installation where it is Starting Services. I get errors for each server Error 1920 Service Destination and server failed to start. Please can you advise why this is occurring and what I can do to fix it?
I keep getting the log in for the CMS, but no matter what I enter it fails. Possibly I have selected something wrong in the installation. I do not believe we had to log into the CMS previously.
It comes up with
System: CrystalReports (no other options) User Name: Administrator
Password:
Authentication: Enterprise (other options LDAP, Windows NT, Windows AD - all these come up with error that there is no plug-in). I have entered the server password which failed, tried it blank which failed. I do not know what is required here.
I have tried all our passwords, but no users or passwords work. I have tried selecting different options, but have mostly tried New with the Create new or use existing, java and iis both selected as default, SQL Server and entered sa + password,
I think probably an old version of the CMS exists from the original installation, but I have tried complete uninstall.
In the event viewer there is error:
Event Type:     Error
Event Source:     Application Error
Event Category:     (100)
Event ID:     1000
Date:          18/08/2010
Time:          14:16:24
User:          N/A
Computer:     CRYSTALREPORTS
Description:
Faulting application cacheserver.exe, version 11.0.0.1282, faulting module unknown, version 0.0.0.0, fault address 0x7ff2fbfc.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 41 70 70 6c 69 63 61 74   Applicat
0008: 69 6f 6e 20 46 61 69 6c   ion Fail
0010: 75 72 65 20 20 63 61 63   ure cac
0018: 68 65 73 65 72 76 65 72   heserver
0020: 2e 65 78 65 20 31 31 2e   .exe 11.
0028: 30 2e 30 2e 31 32 38 32   0.0.1282
0030: 20 69 6e 20 75 6e 6b 6e    in unkn
0038: 6f 77 6e 20 30 2e 30 2e   own 0.0.
0040: 30 2e 30 20 61 74 20 6f   0.0 at o
0048: 66 66 73 65 74 20 37 66   ffset 7f
0050: 66 32 66 62 66 63         f2fbfc
Please can someone help? I am almost suicidal!
Georgie

Moved to BOE forums where CRS is supported.

[SOLVED]Systemd and Crashplan service failed.

Hello,
Crashplan service won't start.
systemctl status crashplan.service
crashplan.service - CrashPlan Backup Engine
Loaded: loaded (/usr/lib/systemd/system/crashplan.service; enabled)
Active: failed (Result: exit-code) since Wed, 17 Oct 2012 11:21:39 -0600; 1h 11min ago
Process: 922 ExecStop=/opt/crashplan/bin/CrashPlanEngine stop (code=exited, status=0/SUCCESS)
Process: 527 ExecStart=/opt/crashplan/bin/CrashPlanEngine start (code=exited, status=0/SUCCESS)
Main PID: 920 (code=exited, status=127)
CGroup: name=systemd:/system/crashplan.service
Oct 17 11:21:29 arch CrashPlanEngine[527]: Starting CrashPlan Engine ... Using standard startup
Oct 17 11:21:29 arch CrashPlanEngine[527]: OK
Oct 17 11:21:29 arch systemd[1]: Started CrashPlan Backup Engine.
Oct 17 11:21:29 arch CrashPlanEngine[922]: Stopping CrashPlan Engine ... /opt/crashplan/bin/CrashPlanEngine: line 144: kill: (920) - No such process
Oct 17 11:21:39 arch CrashPlanEngine[922]: OK
Please let me know what information can I provide to sort out this issue.
Thanks.
Last edited by donniezazen (2012-10-18 07:04:11)

/usr/lib/systemd/system/crashplan.service
[Unit]
Description=CrashPlan Backup Engine
After=network.target
[Service]
Type=forking
PIDFile=/opt/crashplan/CrashPlanEngine.pid
EnvironmentFile=/opt/crashplan/bin/run.conf
WorkingDirectory=/opt/crashplan
ExecStart=/opt/crashplan/bin/CrashPlanEngine start
ExecStop=/opt/crashplan/bin/CrashPlanEngine stop
[Install]
WantedBy=multi-user.target

The DHCP service failed to see a directory server for authorization.

We have two DHCP servers hosted on Hyper-V.
But after shutdown activity at our DC, the servers gave an usual issue.
"The DHCP service failed to see a directory server for authorization."
We have rebooted number of time before getting this server into production but it never gave such kind of error.
Also this time the local DC was shutdown.
Please suggest the necessary steps to be taken.

Hi,
The authorized DHCP server contacts a domain controller every 60 min to detect/redetect his status. Maybe your DHCP has tried to reach the DC which was offline thus throwing that error. Are you still having issues with DHCP server servicing clients?
Once the server talks to a DC and checks that his authorized the service will start leasing IPs to clients.
http://technet.microsoft.com/en-us/library/cc754493.aspx
http://technet.microsoft.com/en-us/library/cc781697(v=ws.10).aspx
Regards,
Calin

The DHCP Service failed to see a directory server for authorization error

Hi Experts,
"The DHCP Service failed to see a directory server for authorization error"
I have DHCP Server installed on the same server where Active directory is installed its a domain controller, when I see the event logs I saw the above error.
This alert comes a number of times, just after the error
"The DHCP/BINL service on the local machine, belonging to the Windows Administrative domain eg.com.pk, has determined that it is authorized to start. It is servicing clients now."
Please somebody suggest some solution for this.
TechSpec90

Two questios:
Is the server a domain controller?
And, according to this, "The DHCP/BINL service on the local machine, belonging to the Windows Administrative domain eg.com.pk, has determined that it is authorized to start. It is servicing clients now", the service eventually do start, yes?
Best Regards,
Jesper Vindum, Denmark
Systems Administrator
Help the forum: Monitor(alert) your threads and vote helpful replies or mark them as answer, if it helps solving your problem.

Job for httpd.service failed. See 'systemctl status httpd.service' and

Hello,
I am the problem. I change "/etc/httpd/conf/httpd.conf" to install php5 on apache.
sudo systemctl start httpd
Job for httpd.service failed. See 'systemctl status httpd.service' and 'journalctl -xn' for details.
systemctl status httpd.service
● httpd.service - Apache Web Server
Loaded: loaded (/usr/lib/systemd/system/httpd.service; enabled)
Active: failed (Result: exit-code) since lun. 2014-08-25 12:19:31 CEST; 1min 18s ago
Process: 2208 ExecStop=/usr/bin/apachectl graceful-stop (code=exited, status=1/FAILURE)
Process: 2433 ExecStart=/usr/bin/apachectl start (code=exited, status=1/FAILURE)
Main PID: 2060 (code=exited, status=0/SUCCESS)
août 25 12:19:31 creaprog apachectl[2433]: httpd: Syntax error on line 66 o...y
août 25 12:19:31 creaprog systemd[1]: httpd.service: control process exite...=1
août 25 12:19:31 creaprog systemd[1]: Failed to start Apache Web Server.
août 25 12:19:31 creaprog systemd[1]: Unit httpd.service entered failed state.
Hint: Some lines were ellipsized, use -l to show in full.
cat /etc/httpd/conf/httpd.conf
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
ServerRoot "/srv/http"
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
# Mutex default:/run/httpd
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule allowmethods_module modules/mod_allowmethods.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule cache_socache_module modules/mod_cache_socache.so
#LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule macro_module modules/mod_macro.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule echo_module modules/mod_echo.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule data_module modules/mod_data.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule request_module modules/mod_request.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule deflate_module modules/mod_deflate.so
#LoadModule xml2enc_module modules/mod_xml2enc.so
#LoadModule proxy_html_module modules/mod_proxy_html.so
LoadModule mime_module modules/mod_mime.so
#LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule logio_module modules/mod_logio.so
#LoadModule lua_module modules/mod_lua.so
LoadModule env_module modules/mod_env.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
#LoadModule remoteip_module modules/mod_remoteip.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_crypto_module modules/mod_session_crypto.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule dialup_module modules/mod_dialup.so
LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule mpm_event_module modules/mod_mpm_event.so
LoadModule unixd_module modules/mod_unixd.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule asis_module modules/mod_asis.so
#LoadModule info_module modules/mod_info.so
#LoadModule suexec_module modules/mod_suexec.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
#LoadModule imagemap_module modules/mod_imagemap.so
#LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
#LoadModule rewrite_module modules/mod_rewrite.so
#Load php5 module
LoadModule php5_module modules/libphp5.so
<IfModule unixd_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
<Directory />
AllowOverride none
Require all denied
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.4/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# AllowOverride FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Require all granted
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ".ht*">
Require all denied
</Files>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#EnableMMAP off
#EnableSendfile on
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
# PHP settings
Include conf/extra/php5_module.conf
# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>
Thanks, sorry my english is bad .
Last edited by Creaprog (2014-08-25 10:25:17)

I just noticed the exact same thing. It turns out that the httpd-ssl.conf file on my system is still the old v2.2 syntax, which means that the SSLMutex directive is still in there. This is an invalid directive after 2.2.
This is where things get interesting. At first, I simply thought I had forgotten to merge httpd-ssl.conf.pacnew after apache had been upgraded to 2.4. However, when I check my pacman.log, it appears that httpd-ssl.conf was never upgraded when apache went to 2.4 - (2.2.26-1 -> 2.4.7-1). There was never a pacnew file generated to be merged.
I took a look at the apache package via the abs and the "proper" httpd-ssl.conf is certainly in there, so why pacman never created a pacnew file is a mystery.
Anyway, to fix this: pull the httpd-ssl.conf from the apache package, either from your cache, using the abs and building it, or (I think) pacman may re-install it if you move the file to a backup location (not sure about this). Then merge your original httpd-ssl-conf with the new one.

W7: User Profile Service service failed at log on: Apparently W7 is no longer creating any user profile data other than username and picture.

First time poster, but I think I've done my homework on this issue.
This issue has similar symptoms to a problem with vista: http://www.vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html
However, it is definitely not the same issue (see further).
Current Config:
HP dv7-1450.
W7 RC 7100 x64
Last update (up to date as of 8/31/09) installed succesfully 8/26/09 and should be unrelated to this issue (not verified yet by a pre-update restore).
Running with Admin account while diagnosing/troubleshooting.
Currently have two working accounts, one standard, one admin.
Symptom:
New user accounts cannot be logged into. On an attempted login to the new account, the following information is displayed on the login screen: "The User Profile Service service failed the logon. User profile cannot be loaded." Windows then logs off the operator and returns to the initial user selection screen. All other aspects of use are normal.
Current Diagnostics:
First attempts to resolve this problem were to recreate the new account. This was attempted when logged in as both Standard and Admin. This was also attempted under safe mode. This has been attempted with virus protection disabled. All to no difference in the symptom.
The similarity to the Vista issue (linked above) caused me to check the registry entry under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\ for the new profile (as suggested by that link). Unlike that issue, there simply is no entry for the new user. Examination of the new log entries from creation of account to attempted log in provides the following entries:
Level Date and Time Source Event ID Task Category
Information 8/31/2009 12:34:31 PM Microsoft-Windows-Winlogon 6000 None The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
Warning 8/31/2009 12:34:11 PM Microsoft-Windows-Winlogon 6001 None The winlogon notification subscriber <Profiles> failed a notification event.
Information 8/31/2009 12:34:11 PM Microsoft-Windows-Winlogon 6000 None The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
Warning 8/31/2009 12:34:11 PM Microsoft-Windows-Winlogon 6001 None The winlogon notification subscriber <Sens> failed a notification event.
Error 8/31/2009 12:34:10 PM Microsoft-Windows-User Profiles Service 1500 None "Windows cannot log you on because your profile cannot be loaded. Check that you are connected to the network, and that your network is functioning correctly.
DETAIL - Only part of a ReadProcessMemory or WriteProcessMemory request was completed.
Warning 8/31/2009 12:34:10 PM Microsoft-Windows-User Profiles General 1509 None "Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to location C:\Users\TEMP\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm. This error may be caused by network problems or insufficient security rights.
DETAIL - Access is denied.
Error 8/31/2009 12:34:09 PM Microsoft-Windows-User Profiles Service 1511 None Windows cannot find the local profile and is logging you on with a temporary profile. Changes you make to this profile will be lost when you log off.
Warning 8/31/2009 12:34:09 PM Microsoft-Windows-User Profiles General 1509 None "Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to location C:\Users\{New Username}\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm. This error may be caused by network problems or insufficient security rights.
DETAIL - Access is denied.
Naturally I started with the earliest error first, and decided to look to see what is going on. The file that is trying to be copied is there, but the destination folder does not exist. As near as I can tell, whatever process (the User Profiles General Service?) is trying to perform the copy does not have sufficient access to perform the operation. Specifically I suspect it may not be able to create the appropriate folders before performing the copy. Interestingly, it appears that when windows attempts to open/create a temporary account profile, the same issue occurs. Since there is no registry entry either, I suspect that the issue also extends to the creation of registry keys, but I am not familiar enough with the sequence of events in the creation of a user profile to determine if this would come before or after a user profile's first login.
I attempted to find more information, and was able to investigate the UPS diagnostic event log (for a different, but identical attempt at creating and using the new profile). The following two (unhelpful to me) log entries were generated.
Level Date and Time Source Event ID Task Category
Information 8/31/2009 12:34:10 PM Microsoft-Windows-User Profiles Service 1002 (1001) "The description for Event ID 1002 from source Microsoft-Windows-User Profiles Service cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
The message id for the desired message could not be found
Information 8/31/2009 12:34:09 PM Microsoft-Windows-User Profiles Service 1001 (1001) "The description for Event ID 1001 from source Microsoft-Windows-User Profiles Service cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
It seems to imply that the User Profiles Service may be corrupted, but this may also be unrelated. I do not know how to specifically repair this service anyway (but am open to try it if someone can walk me through it a bit).
There's the info. I'd like to figure out how to watch the account creation process in more detail to see if I gleen more, but I don't have the experience to know what to do to enable such a log. I will not perform a reinstall and am loath to do a restore, instead looking more for a cause and effect repair: something that would actually help MS fix the problem rather than have the customer fix the symptom.
Thanks in advance to responders!

First time poster, but I think I've done my homework on this issue.
This issue has similar symptoms to a problem with vista: http://www.vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html
However, it is definitely not the same issue (see further).
Current Config:
HP dv7-1450.
W7 RC 7100 x64
Last update (up to date as of 8/31/09) installed succesfully 8/26/09 and should be unrelated to this issue (not verified yet by a pre-update restore).
Running with Admin account while diagnosing/troubleshooting.
Currently have two working accounts, one standard, one admin.
Symptom:
New user accounts cannot be logged into. On an attempted login to the new account, the following information is displayed on the login screen: "The User Profile Service service failed the logon. User profile cannot be loaded." Windows then logs off the operator and returns to the initial user selection screen. All other aspects of use are normal.
Current Diagnostics:
First attempts to resolve this problem were to recreate the new account. This was attempted when logged in as both Standard and Admin. This was also attempted under safe mode. This has been attempted with virus protection disabled. All to no difference in the symptom.
The similarity to the Vista issue (linked above) caused me to check the registry entry under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\ for the new profile (as suggested by that link). Unlike that issue, there simply is no entry for the new user. Examination of the new log entries from creation of account to attempted log in provides the following entries:
Level Date and Time Source Event ID Task Category
Information 8/31/2009 12:34:31 PM Microsoft-Windows-Winlogon 6000 None The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
Warning 8/31/2009 12:34:11 PM Microsoft-Windows-Winlogon 6001 None The winlogon notification subscriber <Profiles> failed a notification event.
Information 8/31/2009 12:34:11 PM Microsoft-Windows-Winlogon 6000 None The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
Warning 8/31/2009 12:34:11 PM Microsoft-Windows-Winlogon 6001 None The winlogon notification subscriber <Sens> failed a notification event.
Error 8/31/2009 12:34:10 PM Microsoft-Windows-User Profiles Service 1500 None "Windows cannot log you on because your profile cannot be loaded. Check that you are connected to the network, and that your network is functioning correctly.
DETAIL - Only part of a ReadProcessMemory or WriteProcessMemory request was completed.
Warning 8/31/2009 12:34:10 PM Microsoft-Windows-User Profiles General 1509 None "Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to location C:\Users\TEMP\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm. This error may be caused by network problems or insufficient security rights.
DETAIL - Access is denied.
Error 8/31/2009 12:34:09 PM Microsoft-Windows-User Profiles Service 1511 None Windows cannot find the local profile and is logging you on with a temporary profile. Changes you make to this profile will be lost when you log off.
Warning 8/31/2009 12:34:09 PM Microsoft-Windows-User Profiles General 1509 None "Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to location C:\Users\{New Username}\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm. This error may be caused by network problems or insufficient security rights.
DETAIL - Access is denied.
Naturally I started with the earliest error first, and decided to look to see what is going on. The file that is trying to be copied is there, but the destination folder does not exist. As near as I can tell, whatever process (the User Profiles General Service?) is trying to perform the copy does not have sufficient access to perform the operation. Specifically I suspect it may not be able to create the appropriate folders before performing the copy. Interestingly, it appears that when windows attempts to open/create a temporary account profile, the same issue occurs. Since there is no registry entry either, I suspect that the issue also extends to the creation of registry keys, but I am not familiar enough with the sequence of events in the creation of a user profile to determine if this would come before or after a user profile's first login.
I attempted to find more information, and was able to investigate the UPS diagnostic event log (for a different, but identical attempt at creating and using the new profile). The following two (unhelpful to me) log entries were generated.
Level Date and Time Source Event ID Task Category
Information 8/31/2009 12:34:10 PM Microsoft-Windows-User Profiles Service 1002 (1001) "The description for Event ID 1002 from source Microsoft-Windows-User Profiles Service cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
The message id for the desired message could not be found
Information 8/31/2009 12:34:09 PM Microsoft-Windows-User Profiles Service 1001 (1001) "The description for Event ID 1001 from source Microsoft-Windows-User Profiles Service cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
It seems to imply that the User Profiles Service may be corrupted, but this may also be unrelated. I do not know how to specifically repair this service anyway (but am open to try it if someone can walk me through it a bit).
There's the info. I'd like to figure out how to watch the account creation process in more detail to see if I gleen more, but I don't have the experience to know what to do to enable such a log. I will not perform a reinstall and am loath to do a restore, instead looking more for a cause and effect repair: something that would actually help MS fix the problem rather than have the customer fix the symptom.
Thanks in advance to responders!
To resolve this issue, I suggst you delete the file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm.Arthur Xie - MSFT

Em uninstalled "start up faster" addon im on firefox version 4 and yet when i try to install again i get the error message create service failed , can anyone tell me how to resolve this , i would like to make sure i get this addon back

im on firefox 4 ,recently ,i tried new addon for firefox 4 called start up faster, i removed it, just as comparison to see boot up times , and then when i tried to install again i get the message create service failed, the icon stays on my desktop, want to check this addon is still performing its role, or could i fix something to make sure its properly on my addon list, thank you,

Is it still showing up in your ad-on manager?

Apple Mobile Device Service failed to start which eventually leads to windows error 193 which never goes away no matter what I do and the dreaded

Mid way through download of I-Tunes after clearing every Apple program from my computer I get "Apple Mobile Device Service" failed to start message. Eventually leading to Windows error 193 (error 7). How do I get Apple Mobile Device Service to start so I do not get error messages and failure of I-Tunes to install?

If you have a 64-bit machine, then try the "for older video cards" version...
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

How to set up DHCP and NAT for QNAP NAS MyCloud service?

I have an Apple AirPort Extreme Base Station (AEBS) attached to my DSL model (no router in the modem). My QNAP NAS is attached via ethernet to the QNAP NAS. My iMac (running AirPort Utility 6.x) is connected to the AEBS via wifi.
I've found several folks who've tried this (and apparently succeeded) but I'm a networking novice and am having trouble making this work. What I did was to go into the AirPort utility and in the networking section configure "DHCP and NAT" and then called out the static IP and MAC address of the QNAP NAS (as well as the ports I'd like to remain open). However, when I did this and applied the changes, my iMac (connected to the AEBS via wifi) could no longer see the AEBS, which then required me to reset the AEBS, re-configure it back to the previous known good conifiguration and start over. After about 5 cycles of this I gave up.
So, what am I doing wrong here? Do I need to go in and configure every device that is going to access the AEBS as static and call out each device's IP and MAC address? (hopefully not, that'd be a major PITA).
Help. Anyone?

When I run diagnostics with the QNAP, here is the reply I get (IPs redacted):
------ NAT PMP Diagnostics ------
initnatpmp() returned 0 (SUCCESS)
using gateway : xx.x.x.x
sendpublicaddressrequest returned 2 (SUCCESS)
readnatpmpresponseorretry returned 0 (OK)
Public IP address : 192.168.xxx.xxx
epoch = 2621
closenatpmp() returned 0 (SUCCESS)
------ UPnP Diagnostics ------
upnpc : miniupnpc library test client. (c) 2006-2011 Thomas Bernard
Go to http://miniupnp.free.fr/ or http://miniupnp.tuxfamily.org/
for more information.
List of UPNP devices found on the network :
desc: http://xx.x.x.x:60606/8CC1212D0C6D/Server0/ddd
st: upnp:rootdevice
desc: http://xx.x.x.x:9000/TMSDeviceDescription.xml
st: upnp:rootdevice
desc: http://xx.x.x.xx:55000/nrc/ddd.xml
st: upnp:rootdevice
desc: http://xx.x.x.xx:55000/dmr/ddd.xml
st: upnp:rootdevice
desc: http://xx.x.x.xx:49152/4/description.xml
st: upnp:rootdevice
desc: http://xx.x.x.xx:49152/2/description.xml
st: upnp:rootdevice
desc: http://xx.x.x.xx:49152/0/description.xml
st: upnp:rootdevice
desc: http://xx.x.x.xxx:8200/rootDesc.xml
st: upnp:rootdevice
desc: http://xx.x.x.xxx:49152/gatedesc.xml
st: upnp:rootdevice
desc: http://xx.x.x.xxx:49153/gatedesc.xml
st: upnp:rootdevice
desc: http://xx.x.x.xxx:49155/gatedesc.xml
st: upnp:rootdevice
desc: http://xx.x.x.xxx:9000/TMSDeviceDescription.xml
st: upnp:rootdevice
UPnP device found. Is it an IGD ? : http://xx.x.x.x:60606/
Trying to continue anyway
Local LAN ip address : xx.x.x.xxx
GetConnectionTypeInfo failed.
Status : , uptime=3217870016s, LastConnectionError :
Time started : Wed Mar 13 17:04:03 1912
MaxBitRateDown : 7 bps MaxBitRateUp 0 bps
GetExternalIPAddress() returned -3
GetExternalIPAddress failed.
GetGenericPortMappingEntry() returned -3 ((null))

I'm installing the newest itunes 64 bit on my win 7 64 bit professional os. using the itunes installer it loads itunes part way and then i get an error message saying that bonjour service failed to start. i cant get itunes any further. i have to back out

I'm installing the newest version of Itunes over the last version on my laptop. win 7 pro os. it starts the install then a error msg comes up stating that Bonjour service failed to start. verify that i have sufficient priveleges to start system services. I can't retry, ignore only cancel which un-installs all that it has installed and reverts me to the last version which i had. any idea?

it starts the install then a error msg comes up stating that Bonjour service failed to start. verify that i have sufficient priveleges to start system services.
Sometimes we can get past that one by disabling the Bonjour Service prior to the install.
In your Start menu, right-click Computer and select "Manage".
Expand "Services & Applications".
Open "Services". (Perhaps maximise the screen to better see what's going on.)
Right-click the Bonjour Service and select "Properties".
In the General tab, set the Startup type to "Disabled":
... and click OK.
Restart the PC and try another iTunes install. Does it go through properly this time?

DHCP and SMB service failing

Similar Messages

Maybe you are looking for