W7: User Profile Service service failed at log on: Apparently W7 is no longer creating any user profile data other than username and picture.
First time poster, but I think I've done my homework on this issue.
This issue has similar symptoms to a problem with vista: http://www.vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html
However, it is definitely not the same issue (see further).
Current Config:
HP dv7-1450.
W7 RC 7100 x64
Last update (up to date as of 8/31/09) installed succesfully 8/26/09 and should be unrelated to this issue (not verified yet by a pre-update restore).
Running with Admin account while diagnosing/troubleshooting.
Currently have two working accounts, one standard, one admin.
Symptom:
New user accounts cannot be logged into. On an attempted login to the new account, the following information is displayed on the login screen: "The User Profile Service service failed the logon. User profile cannot be loaded." Windows then logs off the operator and returns to the initial user selection screen. All other aspects of use are normal.
Current Diagnostics:
First attempts to resolve this problem were to recreate the new account. This was attempted when logged in as both Standard and Admin. This was also attempted under safe mode. This has been attempted with virus protection disabled. All to no difference in the symptom.
The similarity to the Vista issue (linked above) caused me to check the registry entry under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\ for the new profile (as suggested by that link). Unlike that issue, there simply is no entry for the new user. Examination of the new log entries from creation of account to attempted log in provides the following entries:
Level Date and Time Source Event ID Task Category
Information 8/31/2009 12:34:31 PM Microsoft-Windows-Winlogon 6000 None The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
Warning 8/31/2009 12:34:11 PM Microsoft-Windows-Winlogon 6001 None The winlogon notification subscriber <Profiles> failed a notification event.
Information 8/31/2009 12:34:11 PM Microsoft-Windows-Winlogon 6000 None The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
Warning 8/31/2009 12:34:11 PM Microsoft-Windows-Winlogon 6001 None The winlogon notification subscriber <Sens> failed a notification event.
Error 8/31/2009 12:34:10 PM Microsoft-Windows-User Profiles Service 1500 None "Windows cannot log you on because your profile cannot be loaded. Check that you are connected to the network, and that your network is functioning correctly.
DETAIL - Only part of a ReadProcessMemory or WriteProcessMemory request was completed.
Warning 8/31/2009 12:34:10 PM Microsoft-Windows-User Profiles General 1509 None "Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to location C:\Users\TEMP\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm. This error may be caused by network problems or insufficient security rights.
DETAIL - Access is denied.
Error 8/31/2009 12:34:09 PM Microsoft-Windows-User Profiles Service 1511 None Windows cannot find the local profile and is logging you on with a temporary profile. Changes you make to this profile will be lost when you log off.
Warning 8/31/2009 12:34:09 PM Microsoft-Windows-User Profiles General 1509 None "Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to location C:\Users\{New Username}\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm. This error may be caused by network problems or insufficient security rights.
DETAIL - Access is denied.
Naturally I started with the earliest error first, and decided to look to see what is going on. The file that is trying to be copied is there, but the destination folder does not exist. As near as I can tell, whatever process (the User Profiles General Service?) is trying to perform the copy does not have sufficient access to perform the operation. Specifically I suspect it may not be able to create the appropriate folders before performing the copy. Interestingly, it appears that when windows attempts to open/create a temporary account profile, the same issue occurs. Since there is no registry entry either, I suspect that the issue also extends to the creation of registry keys, but I am not familiar enough with the sequence of events in the creation of a user profile to determine if this would come before or after a user profile's first login.
I attempted to find more information, and was able to investigate the UPS diagnostic event log (for a different, but identical attempt at creating and using the new profile). The following two (unhelpful to me) log entries were generated.
Level Date and Time Source Event ID Task Category
Information 8/31/2009 12:34:10 PM Microsoft-Windows-User Profiles Service 1002 (1001) "The description for Event ID 1002 from source Microsoft-Windows-User Profiles Service cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
The message id for the desired message could not be found
Information 8/31/2009 12:34:09 PM Microsoft-Windows-User Profiles Service 1001 (1001) "The description for Event ID 1001 from source Microsoft-Windows-User Profiles Service cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
It seems to imply that the User Profiles Service may be corrupted, but this may also be unrelated. I do not know how to specifically repair this service anyway (but am open to try it if someone can walk me through it a bit).
There's the info. I'd like to figure out how to watch the account creation process in more detail to see if I gleen more, but I don't have the experience to know what to do to enable such a log. I will not perform a reinstall and am loath to do a restore, instead looking more for a cause and effect repair: something that would actually help MS fix the problem rather than have the customer fix the symptom.
Thanks in advance to responders!
First time poster, but I think I've done my homework on this issue.
This issue has similar symptoms to a problem with vista: http://www.vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html
However, it is definitely not the same issue (see further).
Current Config:
HP dv7-1450.
W7 RC 7100 x64
Last update (up to date as of 8/31/09) installed succesfully 8/26/09 and should be unrelated to this issue (not verified yet by a pre-update restore).
Running with Admin account while diagnosing/troubleshooting.
Currently have two working accounts, one standard, one admin.
Symptom:
New user accounts cannot be logged into. On an attempted login to the new account, the following information is displayed on the login screen: "The User Profile Service service failed the logon. User profile cannot be loaded." Windows then logs off the operator and returns to the initial user selection screen. All other aspects of use are normal.
Current Diagnostics:
First attempts to resolve this problem were to recreate the new account. This was attempted when logged in as both Standard and Admin. This was also attempted under safe mode. This has been attempted with virus protection disabled. All to no difference in the symptom.
The similarity to the Vista issue (linked above) caused me to check the registry entry under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\ for the new profile (as suggested by that link). Unlike that issue, there simply is no entry for the new user. Examination of the new log entries from creation of account to attempted log in provides the following entries:
Level Date and Time Source Event ID Task Category
Information 8/31/2009 12:34:31 PM Microsoft-Windows-Winlogon 6000 None The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
Warning 8/31/2009 12:34:11 PM Microsoft-Windows-Winlogon 6001 None The winlogon notification subscriber <Profiles> failed a notification event.
Information 8/31/2009 12:34:11 PM Microsoft-Windows-Winlogon 6000 None The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
Warning 8/31/2009 12:34:11 PM Microsoft-Windows-Winlogon 6001 None The winlogon notification subscriber <Sens> failed a notification event.
Error 8/31/2009 12:34:10 PM Microsoft-Windows-User Profiles Service 1500 None "Windows cannot log you on because your profile cannot be loaded. Check that you are connected to the network, and that your network is functioning correctly.
DETAIL - Only part of a ReadProcessMemory or WriteProcessMemory request was completed.
Warning 8/31/2009 12:34:10 PM Microsoft-Windows-User Profiles General 1509 None "Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to location C:\Users\TEMP\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm. This error may be caused by network problems or insufficient security rights.
DETAIL - Access is denied.
Error 8/31/2009 12:34:09 PM Microsoft-Windows-User Profiles Service 1511 None Windows cannot find the local profile and is logging you on with a temporary profile. Changes you make to this profile will be lost when you log off.
Warning 8/31/2009 12:34:09 PM Microsoft-Windows-User Profiles General 1509 None "Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to location C:\Users\{New Username}\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm. This error may be caused by network problems or insufficient security rights.
DETAIL - Access is denied.
Naturally I started with the earliest error first, and decided to look to see what is going on. The file that is trying to be copied is there, but the destination folder does not exist. As near as I can tell, whatever process (the User Profiles General Service?) is trying to perform the copy does not have sufficient access to perform the operation. Specifically I suspect it may not be able to create the appropriate folders before performing the copy. Interestingly, it appears that when windows attempts to open/create a temporary account profile, the same issue occurs. Since there is no registry entry either, I suspect that the issue also extends to the creation of registry keys, but I am not familiar enough with the sequence of events in the creation of a user profile to determine if this would come before or after a user profile's first login.
I attempted to find more information, and was able to investigate the UPS diagnostic event log (for a different, but identical attempt at creating and using the new profile). The following two (unhelpful to me) log entries were generated.
Level Date and Time Source Event ID Task Category
Information 8/31/2009 12:34:10 PM Microsoft-Windows-User Profiles Service 1002 (1001) "The description for Event ID 1002 from source Microsoft-Windows-User Profiles Service cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
The message id for the desired message could not be found
Information 8/31/2009 12:34:09 PM Microsoft-Windows-User Profiles Service 1001 (1001) "The description for Event ID 1001 from source Microsoft-Windows-User Profiles Service cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
It seems to imply that the User Profiles Service may be corrupted, but this may also be unrelated. I do not know how to specifically repair this service anyway (but am open to try it if someone can walk me through it a bit).
There's the info. I'd like to figure out how to watch the account creation process in more detail to see if I gleen more, but I don't have the experience to know what to do to enable such a log. I will not perform a reinstall and am loath to do a restore, instead looking more for a cause and effect repair: something that would actually help MS fix the problem rather than have the customer fix the symptom.
Thanks in advance to responders!
To resolve this issue, I suggst you delete the file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm.Arthur Xie - MSFT
Similar Messages
-
I loaded microsoft office on my mac airbook. I have no problem accessing it from my user. When the other log on user is clicked the software icons are not avauilable. How do I have any user on my airbook have access ? . i.e. my wife
Greetings Niel
I was able to copy down the Word, Excel and PowerPoint icons and access "however" when I exit out of the guest user it deletes them from the tool tray at the bottom.... I need them to stay there not have to copy them down..
Can you still assist? -
PO message should get failed for P.grp other than AB1 and AB2
Hello SAP Gurus,
I have a requirement like PO message should get failed for P.grp other than AB1 and AB2.
Detail explanation:
I have a P.grp AB1,AB2,AB3,AB4 etc.... The current process is once PO created and saved the message will be triggered and IDOC is transmitted to the vendor, irrespective of what ever the P.grp.
My requirement is like the PO message should get failed if P.grp is other than AB1 and AB2, and reason should be shown any where in IDOC or in messages.
Pls advice.
Thanks.Hi Jurgen,
Thanks for the reply...
There are only 5 vendors which is relevant for EDI and P.grp AB1 and AB2 denotes EDI PO, same P.grp mapping has been done in PI also via data ID. The user sometimes selects the P.grp AB3, AB4 etc incorrectly and it goes to the vendor which in-turn again the customer has to amend the PO.
Now I'm planning to include a piece of logic while saving the PO, check if the vendor is EDI vendor then P.grp should be AB1 or AB2, if it is a different P.grp then the system will not allow to save the PO,so that the user will select the relevant P.grp for EDI vendors. Pls let me know your thought and inputs.
Thanks. -
Free photo services other than Facebook and Flickr with iPhoto integration?
Currently we use Facebook, though I can't assure anonymity when posting images from my facebook account on a particular bulletin board, due to real name being associated with the image being hosted in Facebook. Flickr, for reasons beyond my control is not viable as a choice because Yahoo now appears to own Flickr, and my Yahoo account I decided for reasons of anonymity to not give my real e-mail address and now I don't have the password for it. Is there an iPhoto uploader software that works with Google images, or some other service that is free for hosting images?
You might give a look at OVI.com. It was bought by Nokia and integrated into their phones but can still be used like facebook or one of the other photo sharing sites. The site will take photos as well as videos.
It's equivalent of MMe's galleries are called channels. You can make individual channels private or public. Private channels can be opened to specific individuals. -
My computer crashed, when I restarted it and restarted FF (6.0.12.1739, with google, adobe and similar plugins), I got the "already running" message.
I use Windows 7.
When I learned to look for the parent lock file, not only was it not there, but my original profile folder to be empty.
So I created another profile folder, and now FF works, but I cannot access my old profile folder.
When I open the location where it should be, nothing's there. But if I go to profile manager, I see my original profile '' is'' still there (and apparently it's where it should be). I tried typing its location in Start, to no avail.
'''I tried making all folders visible,''' as some sites recommend for people who use Windows, but this did not make my old profile folder visible.
Are my bookmarks lost for good?
I have restarted the computer several times 'til now.I forgot to mention that I can't access my old profile, because whenever I click on it, I continue to get the "already running" message. I know that I exit FF when I access profile manager.
-
CUP: Request type change account- Change of user data other than roles
Hi Experts,
I am using the request type change account to change the user type and/or validity of the user. In the description of this request type it says I can use it to request additional access and other changes to an account. Yet when i try to change user validity.. CUP asks me to select one role when I try to submit the request..
Is there any thing else that I need to do so that the request type works for account changes as well?
Thanks!Hi,
Go to End Configuration -> End user personlization, select the checkbox next to 'Roles' and click on change. Change the 'Manadatory' dropdown to 'No'. Now, save the changes and create the change request.
Alpesh -
I am a bit of a novice to apple and need some help. as stated in the header, my laptop is not allowing me to drag songs from my laptop to itunes. I have had itunes on a number of laptops and have never had a problem.
Can someone help?...You can only sync an iPhone to ONE specific computer. Otherwise you'll have the types of problems you're having.
Hope this helps -
Profile Manager: Service has failed with status 500?
I am getting a "Service has failed with status 500" error when trying to enroll a device with profile manager. Does anyone have a resolution for this?
In OS X Server 2.1.1 there seems to be an error, according to: https://discussions.apple.com/thread/4365626?start=0&tstart=0
-
Hello,
I am trying to install Microsoft SQL Server 2008 R2. I get the error bellow (Database Services Engine Failed, SQL Server Replication Failed, Full Text Search Failed, Reporting Services Failed). I already have a copy of SQL Server 2008 R2 on the machine.
I want to create a new named instance of SQL Server for some software I'm installing.
The error is below.
Any help would be much appreciated, thanks!
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Exit code (Decimal): -595541211
Exit facility code: 1152
Exit error code: 49957
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Start time: 2014-02-06 09:14:09
End time: 2014-02-06 11:18:16
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.50.2500.0%26EvtType%3d0x44D4F75E%400xDC80C325
Machine Properties:
Machine name: BAHPBZ52TY
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Sql Server 2008 R2 SQLEXPRESS MSSQL10_50.SQLEXPRESS Database Engine Services
1033 Express Edition 10.50.1600.1 No
Sql Server 2008 R2
Management Tools - Basic 1033 Express Edition
10.50.1600.1 No
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
Installation location: c:\c7ced2c86d6b9813b28186cc831c2054\x64\setup\
Installation edition: EXPRESS_ADVANCED
Slipstream: True
SP Level 1
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: True
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE:
CUSOURCE:
ENABLERANU: True
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,REPLICATION,FULLTEXT,RS,SSMS,SNAC_SDK,OCS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: c:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: c:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: aedt2bSQL
INSTANCENAME: AEDT2BSQL
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE: c:\c7ced2c86d6b9813b28186cc831c2054\PCUSOURCE
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: BAH\568385
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 0
UIMODE: AutoAdvance
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xDC80C325
Configuration error description: Access is denied
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\Detail.txt
Feature: SQL Client Connectivity SDK
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xDC80C325
Configuration error description: Access is denied
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\Detail.txt
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xDC80C325
Configuration error description: Access is denied
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\Detail.txt
Feature: Reporting Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xDC80C325
Configuration error description: Access is denied
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\Detail.txt
Feature: Management Tools - Basic
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Microsoft Sync Framework
Status: Passed
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\SystemConfigurationCheck_Report.htmHello,
If you see error descriptioon it gives access denied so basically it is because of some access issue.I guess You must be using some domin account for installation make sure it is added as local administrator also instead of using NT Authority network
service as SQL server service account use local system account .
Below link would help
http://serverfault.com/questions/212135/access-is-denied-error-installing-sql-server-2008-on-windows-7
You can also browse to setup.exe file and RK on it and select run as administrator
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
User rights for technical User for Web Service Communication
Hello all,
we have a scenario where a web service is called, which is exposed by XI. The XI asks for a technical user, when the service is called from an external application. How can we create a user, which is only able to be used in certain scenarios, so that it's not possible, that everybody who has the user can invoke all scenarios.
Best regards,
DavidHi David,
If I am not wrong, you are using Soap Adapter in XI for receiving webservice calls from 3rd Party Application.
Configure a user with no - roles and authorisation profiles in XI server first.
Then, this users need to be set up in Visual Administrator in XI server.
Ask your Basis to Follow the steps below:
1.Login to XI Visual Administrator.
2.Click on Services -->Security Provider --> Runtime --> Policy Configurations -->
Then select below under Components:
Sap.com/com.sap.aii.af.soapadapter*XISOAPADAPTER --> then click on Security Roles -->
Select: xi_adapter_soap_message --> Modify and add your configured User here in Users tab.
Note: This will authorise your user without any roles.
In this way you can give above username and password to 3rd Party Application to configure at their end.
Since user don't have any access, nobody can misuse it and can only be used for webservice calls at XI server.
Implement this and if solve your problem , provide full points.
Thanks ,
Anurag -
Gkr-Message: secret service operation failed: The name org.freedesktop
When I run svn update in my terminal window, I get lots of these errors..:
Gkr-Message: secret service operation failed: The name org.freedesktop.secrets was not provided by any .service files
What is this and how do I remove the error?
Regards,
BTJIf you dont want to store your passwords on harddisk, you can disable it by edit the following lines in ~/.subversion/config
password-stores =
store-passwords = no
Last edited by Corubba (2011-10-31 10:52:51) -
Weird "secret service operation failed" message
Hi,
Using the subversion commandline works fine but I also get the following message everytime I run an svn command:
svn ls
Message: secret service operation failed: The name org.freedesktop.secrets was not provided by any .service files
src/
doc/
pom.xml
Any hints what might be causing the problem?
I cannot find anything related on the web except wireless / segfault related issues but I do not use wireless and there are no errors because the svn commands work as expected.I'm receiving the same error, It does appear to be something to do with pcmanfm as you can see below (on my system it seems to be anyways).
I havn't found a way to fix as of yet, I'm quite new to linux so googling and what little I've learned are my only resources atm
@archbang ~]$ gksu pcmanfm
** Message: secret service operation failed: The name org.freedesktop.secrets was not provided by any .service files
** Message: secret service operation failed: The name org.freedesktop.secrets was not provided by any .service files
** Message: secret service operation failed: The name org.freedesktop.secrets was not provided by any .service files
(pcmanfm:28673): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
hopefully that's of some help ....to someone -
SCOM 2012: An account failed to log on. EventID 4625
I don't no, why my service account failed to log on to the reporting service. Username and password are correct.
Account For Which Logon Failed:
Security ID: NULL SID
Account Name: svcSCOM
Account Domain: 12345
Failure Information:
Failure Reason: Unknown user name or bad password.
Status: 0xc000006d
Sub Status: 0xc000006a
Process Information:
Caller Process ID: 0xb34
Caller Process Name: C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportServer\bin\ReportingServicesService.exe
The SQL Services on this server are running this account without errors. It doesn't matter if I choose local system account or my scom service account.
Any help is appreciated :-)
Best regards,
DanielHi,
According to the error message and its sub status, it seems like that user name is correct but the password is wrong.
I would like to suggest you reset the account password and re-enter it for all those services that run under the account.
Regards,
Yan Li
Regards, Yan Li -
Configuring Basic Authentication with Username and password on BizTalk Schema Service
Hi,
I have published my schema as a webservice with WCF-BASICHTTP adapter in IIS 8.0.
I wanted to have a Basic Authentication(User name and password restriction).
I made the Receive location with Security mode as Transport and Transport Client Crediential Type as Basic.
I also set the Service in IIS with Basic Authentication only enabled.
But I don't know how to provide a UserName and Password Authentication.
Please provide your suggestions
Regards, Vignesh SHi,
Try & go through the below MSDN link as it explains configuring WCF BasicHttp adapter very well.
http://msdn.microsoft.com/en-us/library/bb246064(v=bts.80).aspx
HTH,
Sumit
Sumit Verma - MCTS BizTalk 2006/2010 - Please indicate "Mark as Answer" or "Mark as Helpful" if this post has answered the question -
Internal monitor ,debug service and Workflow Document Web Services Service
hi,
I have my production oracle apps:R12 12.0.6 ,RHEL 4
showing following error in oracle forms:
internal monitor showing actual 0 and target 1,debug service actual 0 and target 1 and Workflow Document Web Services Service actual 0 and target 1.
Please reply urgentlyHi,
It means, those managers are down.
1. Did you try to restart "Workflow Document Web Services Service" by clicking restart button from Administor Screen ?
2. Were they up and running ? if yes, was there any recent change ?
3. Please check internal manager log and look for any error
4. Use the below Navigation to get more details
From OAM > workflow > Service components > click Web Services OUT Agent > View Log
Thanks
Edited by: user763619 on Jan 16, 2011 9:53 PM
Maybe you are looking for
-
How to maintain time spec.of operations in routing and work centers
Dear consultants, We dont have any time specifications in routing or work center .. we just create an order and the execution of the production involves many operations.... now we want to be specific about the time of operations as the need is to tra
-
Obligatory node 'E1KONP' missing in the structure
Hi Experts, I am extending cond_a04 idoc. am adding the custom segment as the child segment of E1KONH. Am populating the custom fields of this segment in an enhancement in LVKOEF01. This segment is populating and the idoc is successful but its no
-
Right click on firefox at bottom bar no longer shows minimize all windows option
using 3.5.7 because the new version is a memory hog and had other unusual problems esp with flash - have not upgraded (FF, OS etc) anything but this option suddenly disappeared. using Win 7.
-
Email to dynamic list of addresses in Business Objects 11
Post Author: wolfgang666 CA Forum: Publishing I use Business Objects Server version 11 to distribute reports via email but was asked if there was a way to only send the reports to those people listed in the report (which changes daily) instead of the
-
Hi Experts, Company A bought one department of Company B. Company A want to have r/3 and Bw portion of that department. they copied BW portion. All cube and queries working fine with data in cubes. Now we got QA side of R/3 from same company B. How a