Dhcpcd eth0 on every boot SOLVED

Hi, I just installed Duke on my IBM T30 and it won't connect to eth0 automatically.
I have to type "dhcpcd eth0" every boot and it connects OK.
Have I missed a setting somewhere?
Thanks for your help
Regards
Last edited by drum (2007-05-23 07:12:18)

Thanks
I read it and discovered there was a space between eth0 and the = sign.
Cheers mate all fixed

Similar Messages

Have to do alsaconf on every boot [SOLVED]

A couple days ago it told me something about my sound card stopped working and its going to default and i dont have sound on default but if i do alsaconf i get sound back. Problem is i have to do alsaconf every bootup.
I have done alsactl store and whatnot and looked through google for this and saw that someone had listed modules before alsaconf and after alsaconf and blacklisted the modules alsaconf didnt re-activate, but im not sure how to view the running modules.
Last edited by leercrak (2010-12-16 05:17:18)

i did alsactl -f /var/lib/alsa/asound.state store and it didnt save the settings.
my guess is theres a module thats doing it.
going to do an lsmod before alsaconf
lsmod during alsaconf
and an lsmod after to see what needs to die.
edit: ya..theres nothing happening with the modules before,during and after are exactly the same.
Last edited by leercrak (2010-12-14 23:00:01)

[SOLVED] dhcpcd@eth0.service failure

I am trying to move from initscripts to systemd on a server I have no physical access to (luckily I do have a rescue system...).
With only network left in DAEMONS, connectivity comes up just fine, and I see a "dhcpcd -q" process running in the background.
However, removing that last initscripts daemon and using [email protected] fails.
The server has eth0 only and a static IP.
% sudo systemctl start [email protected]
Job for [email protected] failed. See 'systemctl status [email protected]' and 'journalctl' for details.
% systemctl status [email protected]
[email protected] - dhcpcd on eth0
Loaded: loaded (/usr/lib/systemd/system/[email protected]; enabled)
Active: failed (Result: resources) since Tue, 16 Oct 2012 11:26:05 +0200; 44s ago
Process: 14105 ExecStart=/sbin/dhcpcd -A -q -w %I (code=exited, status=0/SUCCESS)
CGroup: name=systemd:/system/[email protected]/eth0
Oct 16 11:26:05 cutie.skaaf.net systemd[1]: Starting dhcpcd on eth0...
Oct 16 11:26:05 cutie.skaaf.net systemd[1]: Failed to start dhcpcd on eth0.
The relevant part of journalctl comes in two shapes, I'm not sure what that depends on.
Oct 16 11:26:05 xxx systemd[1]: Starting dhcpcd on eth0...
Oct 16 11:26:05 xxx dhcpcd[14105]: sending commands to master dhcpcd process
Oct 16 11:26:05 xxx dhcpcd[314]: control command: dhcpcd[14105]: sending commands to master dhcpcd process
Oct 16 11:26:05 xxx dhcpcd[314]: handle_args: no interface
Oct 16 11:26:05 xxx dhcpcd[314]: control command: /sbin/dhcpcd -A -q -w eth0
Oct 16 11:26:05 xxx systemd[1]: PID file /run/dhcpcd-eth0.pid not readable (yet?) after start.
Oct 16 11:26:05 xxx systemd[1]: Failed to start dhcpcd on eth0.
Oct 16 11:26:05 xxx systemd[1]: Unit [email protected] entered failed state.
and
Oct 16 11:27:14 xxx systemd[1]: Starting dhcpcd on eth0...
Oct 16 11:27:14 xxx dhcpcd[14145]: sending commands to master dhcpcd process
Oct 16 11:27:14 xxx dhcpcd[314]: control command: dhcpcd[14145]: sending commands to master dhcpcd process
Oct 16 11:27:14 xxx systemd[1]: PID file /run/dhcpcd-eth0.pid not readable (yet?) after start.
Oct 16 11:27:14 xxx systemd[1]: Failed to start dhcpcd on eth0.
Oct 16 11:27:14 xxx systemd[1]: Unit [email protected] entered failed state.
Now maybe this is trying to tell me that dhcpcd is already running? However the result is the same with "systemctl restart ...".
Upon boot up with no network DAEMON but [email protected] enabled, I simply can't get in.
I also tried editing /usr/lib/systemd/system/dhcpcd\@.service and making everything explicit in ExecStart, but I don't see any more useful output, and systemctl still claims the start failed.
Running dhcpcd eth0 explicitly gives no error exit code:
% sudo dhcpcd eth0
dhcpcd[14347]: sending commands to master dhcpcd process
Questions:
- why does systemctl think the start failed?
- can I find any more debugging info anywhere? Perhaps reboot with sytemd dhcpcd only and redirect journalctl logs to a text file that I can then view from the rescue system?
- why does network DAEMON manage to start dhcpcd, while systemd fails?
Thanks for any help or pointers in advance!
Last edited by nickray (2012-10-16 12:13:41)

Glad you got it working. I would go ahead and mark it as solved.
nickray wrote:Is there a way to do the "systemctl enable" from a rescue system (by editing some file), as was
possible before with /etc/rc.conf? Otherwise I would never have been able to solve this .
When you do a systemctl enable, it shows you what it's doing, making a symlink. If you need to do it by hand, you just have to make the appropriate symlink in /etc/systemd/system to the service file in /usr/lib/systemd/system
nickray wrote:Scimmia, any pointers to read more about the DHCD/DHCPCD issues?
The place I usually start is Wikipedia: http://en.wikipedia.org/wiki/Dhcp
To put it simply, it lets a DHCP client (dhcpcd = dhcp client daemon) request networking information from a DHCP server. The server selects an IP from the pool of IP addresses that it has, and sends that information back to the client along with all the other needed network configuration info. The client automatically configures everything and you're up and running without having to do any manual configuration at all.

Network fails every other boot [SOLVED]

I seem to have a small prob when I startup my pc the network fails every other time. I had some probs w/ dhcp starting when I used gentoo, and found a workaround, putting "dhcpcd -k" in etc/conf.d/local.stop ran the dhcpcd -k command when I shutdown my pc, apparently arch's syntax is a bit different so I doubt etc/conf.d/local.stop exists, I tried /etc/rc.local.shutdown, but that didn't seem to do it either. Could someone please tell me the arch way to enter this command every shutdown?

Snowman wrote:
Haiyadragon wrote:
I'm having the same problem. My motherbord has two network devices. It seems that the designations (eth0 and eth1) switch every boot. So every other boot eth0=dhcp is the right one.
Will "dhcpcd -k" fix it?
Check this: http://wiki.archlinux.org/index.php/Ude … _Each_Boot
Thanks.
Altough I find it quite weird they switch like that.
"Because udev loads all modules at once, devices are sometimes initialized in a different order. For example, with two network cards, you may notice they switch designations between eth0 and eth1"
Yeah, I don't buy it. They switched every boot.
I'm trying the udev-sanctified method. Will find out in a day or so (when I (re)boot).

[SOLVED] Asus 1005PE ethernet | Atheros AR8132 | dhcpcd eth0:timed out

Hello, this was solved through the following process BUT:
pacman -Syu updated my system and kernel. After that update I needed
to reverse the line that I changed before in rc.conf. I change it back to
MODULes=() [removed !atl1c atl1e] which leads to atl1c being loaded
autmoatically. Seems they fixed the problem in a update.
These threads helped me:
( I )http://bbs.archlinux.org/viewtopic.php?id=78891
( II )http://www.ubuntugeek.com/howto-setup-n … aunty.html
Current driver for AR8132:
( III )AR81Family-linux-v1.0.1.6.tar.gz http://partner.atheros.com/Drivers.aspx
Hardware:
Asus eeePC 1005PE with Atheros AR8132 ethernet device.
uname -r:
2.6.30-ARCH
Problems:
eth0 not showing up at ifconfig
ethernet device not showing up at lspci
at boot error ar "Start Network"
dhcpcd: timed out
ridiculous count of errors Tx, Rx ..
Removing battery and power cord for a while and then booting without lan cable helped
recognizing the ethernet device at lspci (and eth0 at ifconfig if I remeber right). Plugging
the lan cable produced a high count of errors at Tx, Rx.
(II)
Get the driver (III) and get it ready(II):
tar -xzvf AR81Family-linux-v1.0.1.6.tar.gz
cd src
make
make install
(the note about "#define IRQ_HANDLED 1" (II) wasn't necessary for me. My guess is they updated the driver and it is no longer necessary.)
edit the /etc/rc.conf, prevent atl1c from loading, add atl1e:
MODULES=(!atl1c atl1e) [should look similar to this]
reboot
After reboot the error "dhcpcd: timed out" or "eth0: interface not found or invalid" was fixed,
"ping -c 3 www.google.com" was successful.
lsmod shows atl1e and ifconfig shows eth0.
I hope this is useful to someone, it took me a while to figure it out.
===================================================
O L D
===================================================
Hello,
I installed Arch yesterday on my Asus 1005PE and am trying to get online since.
Wired should be easier but there is a problem.
I am connecting through a router with DHCP. While booting it fails after
'Starting Network': 'dhcpcd: eth0: interface not found or invalid'
Same error when I enter '/etc/rc.d/network restart'.
ifconfig -a
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
wlan0 Link encap:Ethernet HWaddr 00:25:D3:D8:CF:CA
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
wmaster0 Link encap:UNSPEC HWaddr 00-25-D3-D8-CF-CA-00-00-00-00-00-00-00-00-00-00
[NO FLAGS] MTU:0 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
lspci
( . . . nothing with Ethernet, just Intel, VGA, .. )
02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
I think I saw the lan device recognised once, but rebooting doesn't help.
I read WPA encryption makes WLAN more complicated so I hope you can help me out with my wired connection.
- Felix
Last edited by phlex (2010-03-20 15:48:04)

This is already in my rc.conf:
MOD_AUTOLOAD="yes"
MODULES=()
USELVM="no"
HOSTNAME="newton"
eth0="dhcp"
INTERFACES=(eth0)
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
DAEMONS=(syslog-ng network netfs crond)
I don't see lines missing there.
Unplugging the power cord and removing the battery for some minutes helped somehow (found that odd tip through google). I booted without the lan cable connected and the Atheros AR8132 / L1c was recognized.
Got a new problem then. /etc/rc.d/network restart leads to:
:: Stopping Network [DONE]
:: Starting Network [BUSY]
dhcpcd: timed out
[FAIL]
dhcpcd eth0 leads to:
dhcpcd: version 5.0.6 starting
dhcpcd: eth0: waiting for carrier
dhcpcd: timed out
Suprisingly the 1005HA has the same ethernet device and should be working out of the box..

[Solved] Failing to start dhcpcd@eth0 inside libvirt-lxc vm

What the subject says.
I was thinking that this could be some systemd 197 related problem. I've downgraded
to 196 and the problem remains. I have the latest version of all packages (linux, libvirt, etc.)
See the log below, please. Note that the there is a eth0 interface.
[arch@gitolite ~]$ ip link
12: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000
link/ether 02:00:00:00:00:17 brd ff:ff:ff:ff:ff:ff
14: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN mode DEFAULT
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
[arch@gitolite ~]$ sudo systemctl start dhcpcd@eth0
A dependency job for [email protected] failed. See 'journalctl -xn' for details.
[arch@gitolite ~]$ sudo journalctl -xn
-- Logs begin at Fri, 2013-01-18 18:32:42 UTC, end at Fri, 2013-01-18 22:32:09 U
Jan 18 22:29:58 gitolite sudo[45]: pam_unix(sudo:session): session opened for us
Jan 18 22:29:58 gitolite systemd[1]: Expecting device sys-subsystem-net-devices-
-- Subject: Unit sys-subsystem-net-devices-eth0.device has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Documentation: http://www.freedesktop.org/wiki/Software/systemd/catalog/7d495
-- Unit sys-subsystem-net-devices-eth0.device has begun starting up.
Jan 18 22:31:28 gitolite systemd[1]: Job sys-subsystem-net-devices-eth0.device/s
Jan 18 22:31:28 gitolite systemd[1]: Timed out waiting for device sys-subsystem-
-- Subject: Unit sys-subsystem-net-devices-eth0.device has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Documentation: http://www.freedesktop.org/wiki/Software/systemd/catalog/be02c
-- Unit sys-subsystem-net-devices-eth0.device has failed.
-- The result is timeout.
Jan 18 22:31:28 gitolite systemd[1]: Dependency failed for dhcpcd on eth0.
-- Subject: Unit [email protected] has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Documentation: http://www.freedesktop.org/wiki/Software/systemd/catalog/be02c
-- Unit [email protected] has failed.
-- The result is dependency.
Jan 18 22:31:28 gitolite systemd[1]: Job [email protected]/start failed with r
Jan 18 22:31:28 gitolite systemd[1]: Job sys-subsystem-net-devices-eth0.device/s
Jan 18 22:31:28 gitolite sudo[45]: pam_unix(sudo:session): session closed for us
Jan 18 22:32:09 gitolite sudo[48]: arch : TTY=console ; PWD=/home/arch ; USER=ro
Jan 18 22:32:09 gitolite sudo[48]: pam_unix(sudo:session): session opened for us
libvirt configuration is simple:
<domain type='lxc'>
<name>gitolite</name>
<uuid>3122bf1d-11bb-0dd8-be64-7e352b3f8694</uuid>
<memory unit='KiB'>262144</memory>
<currentMemory unit='KiB'>262144</currentMemory>
<vcpu placement='static'>1</vcpu>
<os>
<type arch='x86_64'>exe</type>
<init>/sbin/init</init>
</os>
<clock offset='utc'/>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>restart</on_crash>
<devices>
<emulator>/usr/lib/libvirt/libvirt_lxc</emulator>
<filesystem type='mount' accessmode='passthrough'>
<source dir='/mnt/gitolite'/>
<target dir='/'/>
</filesystem>
<interface type='network'>
<mac address='02:00:00:00:00:17'/>
<source network='default'/>
</interface>
<console type='pty'>
<target type='lxc' port='0'/>
</console>
</devices>
</domain>
Can anyone help, please?
Last edited by masm (2013-01-25 21:12:30)

I'm trying to get this running without using systemd.
I restart the domain, and do
# ip link set eth0 up
# ip link show eth0
14: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000
link/ether 02:00:00:00:00:17 brd ff:ff:ff:ff:ff:ff
# dhcpcd eth0
dhcpcd[44]: version 5.6.4 starting
dhcpcd[44]: eth0: if_init: Read-only file system
dhcpcd[44]: eth0: interface not found or invalid
What does this mean? I googled for it, but didn'g find anything
In the guest, the only filesystem marked as read-only is /sys.
Any idea?

Printer Going OFFLINE on Every Boot.

Hello,
In My Network 7 PCS are connected to one HP Printer(Laserjet 1020). in that 1 PC having problem is "Printer Going OFFLINE on Every Boot" then We connected on every boot/Restart and I Restart The Servieces also like(print spoller etc..)The PC.Then only Its Works. Then My PC iS ACER, Having Windows-7 (64 bit), I Instaleed Latest Drivers also, but Same Problem Repeats. I Need Help On This Queiry ?

Hi,
Please use the following tips/instructions to fix:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02221706&cc=us&lc=en&dlc=en
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Net works only after running "dhcpcd eth0" : Kernel 2.6.27

Hi.!
Ever since I upgraded to 2.6.27, my net connection works only after I run the command "dhcpcd eth0" after booting in the system.Any suggestions to get net working without issuing this command would be great.!
Thanks and Regards,
Poisonblack
EDIT: A search on the forum reveals these two threads that may be related to mine...
http://bbs.archlinux.org/viewtopic.php?id=57081
http://bbs.archlinux.org/viewtopic.php?id=57043
http://bbs.archlinux.org/viewtopic.php?id=57102
Will have a closer look on the threads when I get back on Arch.
Last edited by Poisonblack (2008-10-16 17:32:54)

Poisonblack wrote:
Hi.!
Ever since I upgraded to 2.6.27, my net connection works only after I run the command "dhcpcd eth0" after booting in the system.Any suggestions to get net working without issuing this command would be great.!
Thanks and Regards,
Poisonblack
EDIT: A search on the forum reveals these two threads that may be related to mine...
http://bbs.archlinux.org/viewtopic.php?id=57081
http://bbs.archlinux.org/viewtopic.php?id=57043
http://bbs.archlinux.org/viewtopic.php?id=57102
Will have a closer look on the threads when I get back on Arch.
I don't know if this will help or not, but I was having a problem with the "-R" argument and my dhcpcd.
I used to have my dnsmasq and OpenDNS using this guide: http://wiki.archlinux.org/index.php/Pos … ure_dhcpcd
I had to remove the "-R" to get my internet to work after the last update.... it's still not fixed but at least my Internet works when I start.

Dhcpcd.service vs dhcpcd@eth0.service

Hello everybody,
It seems like I have 2 dhcpcd services: dhcpcd.service and [email protected]
The eth0.service one fails at boot, however the first one seems to work.
systemctl status dhcpcd
dhcpcd.service - dhcpcd on all interfaces
Loaded: loaded (/usr/lib/systemd/system/dhcpcd.service; enabled)
Active: active (running) since Mon 2013-05-13 07:41:35 EDT; 15min ago
Process: 315 ExecStart=/sbin/dhcpcd -q -b (code=exited, status=0/SUCCESS)
Main PID: 329 (dhcpcd)
CGroup: name=systemd:/system/dhcpcd.service
└─329 /sbin/dhcpcd -q -b
systemctl status dhcpcd@eth0
[email protected] - dhcpcd on eth0
Loaded: loaded (/usr/lib/systemd/system/[email protected]; enabled)
Active: failed (Result: resources) since Mon 2013-05-13 07:41:35 EDT; 15min ago
Process: 313 ExecStart=/usr/sbin/dhcpcd -q -w %I (code=exited, status=0/SUCCESS)
Should I just disable and remove the dhcpcd.service and let the other one enabled ?
Cheers,
b0b0

dhcpcd.service will enable DHCP Client on all interfaces...
dhcpcd@<interface>.service will enable DHCP Client only on <interface>...
Then you choose if only want to enable DHCP Client on one interface or on all.

To automatically bring interface eth0 up on boot

Eth0 can be brought up by:
ip link set eth0 up
Some times when
systemctl start dhcpcd@eth0
doesn't work,
probably
sudo cp /etc/network.d/examples/ethernet-dhcp /etc/network.d/ethernet-whatevername-dhcp
and edit /etc/conf.d/netcfg to change NETWORKS=(ethernet-whatevername-dhcp) couild solve the problem.

WonderWoofy wrote:
What?
Is this a question? Or are you telling?
Ha ha ha ...
Last edited by illusionist (2012-12-14 02:42:41)

Systemd dhcpcd service failing on boot

Hi folks,
I'm trying to convert my workstation to "pure" systemd configuration (no initscripts-systemd):
[csingley@quadrupel ~]$ pacman -Qs systemd
local/libsystemd 185-3
systemd client libraries
local/systemd 185-3
system and service manager
local/systemd-arch-units 20120612-5
Arch specific Systemd unit files
local/systemd-sysvcompat 185-3
sysvinit compat for systemd
local/systemd-tools 185-3
standalone tools from systemd
Per the instructions on the wiki, I enabled [email protected], but the service fails to start upon boot.
[root@quadrupel csingley]# systemctl status [email protected]
[email protected] - dhcpcd on eth0
Loaded: loaded (/usr/lib/systemd/system/[email protected]; enabled)
Active: failed (Result: exit-code) since Thu, 28 Jun 2012 12:36:16 -0500; 39s ago
Process: 299 ExecStart=/sbin/dhcpcd -A -q -w %I (code=exited, status=1/FAILURE)
CGroup: name=systemd:/system/[email protected]/eth0
However, I can start the service manually after the boot process is complete:
[root@quadrupel csingley]# systemctl start [email protected]
[root@quadrupel csingley]#
Presumably not all dependencies have been satisfied when systemd tries to run dhcpcd during boot.
I'm very new to systemd; any tips for troubleshooting this issue?
TIA

dj-x-cess wrote:
I have the same problem.
It seems, at least for my machine, dhcpcd starts before eth0 gets initialized on boot time:
Sep 05 07:38:39 vostro dhcpcd[180]: version 5.6.0 starting
Sep 05 07:38:39 vostro dhcpcd[180]: eth0: interface not found or invalid
Sep 05 07:38:39 vostro kernel: r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Sep 05 07:38:39 vostro kernel: r8169 0000:13:00.0: irq 47 for MSI/MSI-X
Sep 05 07:38:39 vostro kernel: r8169 0000:13:00.0: eth0: RTL8168d/8111d at 0xf9c00000, a4:ba:db:a6:a6:33, XID 083000c0 IRQ 47
Sep 05 07:38:39 vostro kernel: r8169 0000:13:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
Yes. Same thing here with the latest install. I put "tg3" in /etc/modules-load.d/tigon.conf. Guess it loads it sooner then and now it gets an IP. Couldn't you make dhcpcd wait for eth0 to come up? It looks important, I mean dhcp should work I'm a newbie with Arch, installed it for the first time.
Here are my logs before the fix (I was looking in /var/log/, but then I found out that there is a journalctl command):
Nov 14 15:33:40 neimastina dhcpcd[176]: version 5.6.2 starting
Nov 14 15:33:40 neimastina dhcpcd[176]: eth0: interface not found or invalid
Nov 14 15:33:44 neimastina systemd[1]: [email protected]: control process exited, code=exited status=1
Nov 14 15:33:45 neimastina kernel: EDAC MC: Ver: 3.0.0
Nov 14 15:33:45 neimastina kernel: wmi: Mapper loaded
Nov 14 15:33:45 neimastina kernel: iTCO_vendor_support: vendor-support=0
Nov 14 15:33:45 neimastina kernel: tg3.c:v3.124 (March 21, 2012)
Nov 14 15:33:45 neimastina kernel: EDAC MC0: Giving out device to 'x38_edac' 'x38': DEV 0000:00:00.0
Nov 14 15:33:45 neimastina kernel: tg3 0000:34:00.0: eth0: Tigon3 [partno(BCM95751A519FLP) rev 4201] (PCI Express) MAC address 00:10:18:53:12:b7
Nov 14 15:33:45 neimastina kernel: tg3 0000:34:00.0: eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
Nov 14 15:33:45 neimastina kernel: tg3 0000:34:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
Nov 14 15:33:45 neimastina kernel: tg3 0000:34:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
Nov 14 15:33:45 neimastina kernel: gpio_ich: GPIO from 195 to 255 on gpio_ich

Mac shows iCloud password popup every boot.

I get this popup window every boot.
Why does that window show up?
and How can I fixed it?
+
I reinstalled OS X 10.9.3 today.
Before reinstalling, I didn't see that window.

You are not alone.
This needs an Apple iCloud Guru to clarify & solve.
This first showed up for me in Mavericks 10.9.3, and was not fixed in 10.9.4. Neither was a beta version. Updating to a later version of the OS also fails to resolve this suggesting that perhaps it is the iCloud authentication server that is broke -AGAIN!
Unfortunately the Apple helpdesk knows nothing of this issue, or are trying to keep lit under wraps.
My guess is that some of the downloads from Software Update are in fact experimental builds, Noting that is some countries Apple is playing with two factor authentication, perhaps we have been hit by a build that is trying out an alternative authentication method, that simply keeps failing. Though perhaps it is geolocation triggered, as doing a clean install achieves no improvement.
ICloud, which I prefer to call iClod still has bugs, but unfortunately those best able to fault find the authentication system are not available to users, so getting this bug fixed will involve further contributions from more clued up users.
Unfortunately it seems that the failure manifests in several ways, with at least 3 different, but cryptic seemingly random dialogue boxes appearing in response to entered passwords, and also no apparent response at all, i.e., no change.
What is odd is that one can be successfully signed in to iCoud, able to manage ones account, but unable to successfully verify ones password in the preference pane. Looking deeper in the console loads there is reference to a file not being able to be written. So is this a permissions issue, or is the preferences file to be written missing from the bundle from the iCloud bundle.
And even more oddly when one intentionally enters an incorrect password in the password verification dialogue, iCloud seems to correctly identify it as an incorrect password, suggesting that iCloud recognises a correct password but then fails to complete the verification transaction.
Note this iCloud preference pane userID password verification process is not documented anywhere that I have been able to discover. Is it another inadvertent FEATURE of OS X that was mostly deprecated because it did't work as expected?
One day Apple will wake up and instigate a dedicated iCloud help call centre tasked to ensure that all users have access to this service which has become intrinsic to ownership and use of a Mac.

Unlocked 'internet & network' configurtaion after every boot ?

Hello,
my "internet & network" configuration is unlocked
ater every boot or reboot. If i lock the configurtation
manually and unlock it again, so i will ask to my password.
But after a boot or reboot, there is no password question to open the configuration, this part is unlocked automatically.
What is happend ? Is my system unsecured ?
Thank you for your help and
best regards
oelauge
iMac (intel) Mac OS X (10.4.6) With all updates

oelauge,
Locking secure system preferences may help
you solve your problem. I did not have a link for
10.4 Help, but the information on the Mac OS X 10.3
Help is identical.
Let us know if that solves your problem.
;~)
Thank you,
the problem is solved with your help.
Best regards
oelauge
iMac Mac OS X (10.4.6)

After upgrading to Mountain Lion, Interface builder starts up with an error every boot.

I've got a late 2008 Macbook Unibody 13", and a few months back I upgraded from Snow Leopard to Mountain Lion. Ever since the upgrade, at every boot up Interface Builder starts up with an error. I've just ignored it mostly, but now I'm getting annoyed with it. How can I find the programs that start up every boot to research this, or stop it from loading Interface Builder every time?

You have to delete it using the minus sign at the bottom. The check/un-check is for hiding items.

Show the boot menu on every boot?

Hi there, i'm wondering if there is a application or method to show the boot menu on every boot instead of having to hold down the the option key?
I apologize if this question may have been asked previously!
Cheers
KK

Not really although there is a menubar application called QuickBoot you might look at - VersionTracker or MacUpdate.

Dhcpcd eth0 on every boot SOLVED

Similar Messages

Maybe you are looking for