Dialog Instance Host Name
Hi,
I am having a problem in SM51 where the dialog instance host name is the same as the central instance host name.
Server Name Host Name Message Types Server Status
HHA55_ECP_00 HHA55 Dialog Batch Update Upd2 Spool ICM J2EE Active
HHA56_ECP_00 HHA55 Dialog Batch Update Upd2 Spool ICM J2EE Active
We have a central instance and a dialog instance installed on seperate nodes in a HA cluster. This problem only happens when the message server runs on the primary node. When the message server is failed over to the node where the dialog instance runs the hostname for HHA56_ECP_00 is HHA56 which is correct. This is effecting load balancing and prevents me from signing on through the Portal with the HTML gui.
I have checked the parameters for each of the instance profiles which are correct. The message server points to a virtual host and SAPLOCALHOST and SAPGLOBALHOST are correctly defined for each instance. I have setup each instance to use the logon group PUBLIC in SMLG. The hosts and services files are the same in each node of the cluster. I can successfully resolve the host names using DNS. Also the internal RFC destinations in SM59 are configured with the correct hosts.
Does anyone know where the data for these host names is maintained?
Thank you!
I have solved the problem.
I discovered the network bindings were being accessed in the wrong order.
Similar Messages
-
How to get Service instance host name(s)
I have a a list of Cloud Service host names that are connected to our azure DB
host_name
RD00133D57C3B2
RD00133D80CF2E
RD00133D52C765
RD00133D52CE41
RD00133D52C926
But i have no idea how to tell which cloud services those are.
Get-AzureService, Get-AzureRole & Get-AzureDeployment are not returning this data.On one hand, as according to
http://msdn.microsoft.com/en-us/library/ms176013.aspx, you shouldn't rely on that hostname due to some security mechanisms that are in place.
Content not found
We could not find the page you requested.
On the other hand though, you can also configure your own hostname for your VMs in the .csfg file, as according to
http://msdn.microsoft.com/en-us/library/windowsazure/jj156072.aspx. However, I'm not 100% positive whether .NET Framework will use the configured hostname as the exposed hostname
to SQL. You might give it a try though ;)
Server Error in '/' Application.
So there is no way to reverse out that Hostname from the instance with powershell? -
Portal dialog instance questions
Dear SDN,
2 questions on installing a dialog instance for the portal.
1. Does the dialog instance need to have a a different instance number than the central instance if it is on a separate physical host
2. Can you log onto the portal from the dialog instance?
dialog inst # = 3
Ci inst # = 1
i.e. http://dialoghost:50003/irj?
ThanksPrakash Singh wrote:"No if the dialog instance is not on the same machine. 2. Yes you should be able to logon to portal from dialog instance. http://name of your dialog instance server: port/irj"
The above statement is accurate, because any SAP instance is uniquely identified by its hostname and its instance number. So, on the same host you must have a different instance number for your SAP instance and on multiple hosts you could run an SAP instance with the same instance number as your central instance.
Regards,
Phani. -
Dialog Instance installation - Error u0093Service Not Started u0093
Hi All,
We are facing some issues while installing Dialog Instance on Windows 2003 server. Please help me on this...
Below are the Central Instance Details:
SAP Component Version: SAP NetWeaver 2004s
Basis Release: 700
Kernel Release : 700
Patch Level : 111
Operating System: AIX 5.2
Database : Oracle 10.2.0
Central Instance host: centralhost
SID : CID
Dialog Instance Details:
SAP Component Version: SAP NetWeaver 2004s
Operating System: Windows 2003 Server(SP2 32 Bit)
Dialog Instance host: dialoghost
Instance No: 02
In Step 8 of installation, we are getting error Service Not Started
sapinst.log file content :-
INFO 2008-02-18 03:46:44
Creating SAP start service of instance CID/D02...
INFO 2008-02-18 03:46:45
Creating file C:\Program Files\sapinst_instdir\NW04S\LM\AS\ORA\DI\sapstartsrv.exe.log.
INFO 2008-02-18 03:46:45
Output of D:\usr\sap\CID\D02\exe\sapstartsrv.exe -r -q -p
centralhost\sapmnt\CID\SYS\profile\START_D02_DIALOGHOST -s CID -n 02 -U DIALOGHOST\SAPServiceCID -P XXXXXX -e DIALOGHOST\cidadm is written to the logfile sapstartsrv.exe.log.
WARNING 2008-02-18 03:46:51
Execution of the command "D:\usr\sap\CID\D02\exe\sapstartsrv.exe -r -q -p
centralhost\sapmnt\CID\SYS\profile\START_D02_DIALOGHOST -s CID -n 02 -U DIALOGHOST\SAPServiceCID -P XXXXXX -e DIALOGHOST\cidadm" finished with return code -1. Output:
Service not started.
ERROR 2008-02-18 03:46:52
MOS-01011 'D:/usr/sap/CID/D02/exe/sapstartsrv.exe' returned with '-1'.
ERROR 2008-02-18 03:46:52
MOS-01011 'D:/usr/sap/CID/D02/exe/sapstartsrv.exe' returned with '-1'.
ERROR 2008-02-18 03:46:52
FCO-00011 The step createService with step key |NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|NW_Instance|ind|ind|ind|ind|1|0|createService was executed with status ERROR .
Service User SAPSERVICECID is aligned to administrator group.
And when we tried to start the windows service (SAPCID_02) we got below message
"The SAPCID_02 service on Local computer Started and then stopped. Some Services stop automatoically,if they have no work to do, for example , the performane logs and Alert service"
Please help me on this..
Thanks..
PreethishHi Haynes,
From windows machine we can access the Dilaog instance profile.
Path to executable in SAPCID_02 service is "D:\usr\sap\CID\D02\exe\sapstartsrv.exe" pf="
centalhost\sapmnt\CID\SYS\profile\START_D02_DIALOGHOST"
On Cental Instance( AIX machine) :-
CI profiles are in " /sapmnt/CID/profile " path
and DI profiles are in " /sapmnt/CID/SYS/profile " path
centralhost:cidadm 2> cd /sapmnt/CID/profile
centralhost:cidadm 3> ls -l
total 64
-rw-rr 1 CIDadm sapsys 4958 Feb 12 20:40 CID_DVEBMGS00_CENTRALHOST
-rw-rr 1 CIDadm sapsys 2272 Feb 12 18:39 DEFAULT.PFL
-rw-rr 1 CIDadm sapsys 3826 Nov 20 02:25 START_DVEBMGS00_CENTRALHOST
drwxr-xr-x 2 CIDadm sapsys 256 Nov 02 02:23 oracle
centralhost:cidadm 4> cd /sapmnt/CID/SYS/profile
centralhost:cidadm 5> ls -l
total 40
-rwxrr 1 CIDadm sapsys 303 Feb 17 19:40 CID_D02_DIALOGHOST
-rwxrr 1 CIDadm sapsys 2307 Feb 14 09:43 DEFAULT.PFL
-rwxrr 1 CIDadm sapsys 1013 Feb 17 19:40 START_D02_DIALOGHOST
drwxr-xr-x 2 CIDadm sapsys 256 Feb 14 14:06 oracle
centralhost:CIDadm 6> -
How to get host name in the workflow?
Hi,
I've a requirement where I need to get CQ Inbox url (http://<hostname>:<port>/inbox) in my custom workflow process. I thought of configuring url to some node and retriving from there.. but It's not the good approach as host name will be different for differnt CQ environments. So what is the best way of getting inbox url?
Env: CQ 5.6
Thanks
SivaYep Justin, If the configuration is wrong, any link generated would also be wrong.. I mean, default configuration will be some thing like..
I mean, I can change those configurations as per my instance host name, right?
Example: my instance's host url is: mytest:1501
So I would like to update the same in configurations .. -
Installing Dialog Instances with ECC 6.0 and SQL Server 2005
Hi, I have my ECC 6.0 SAP Server, it is Central Instance, Database instance, all in one. My users are working fine, however we will be adding some new users (15) and we want add a Dialog Instance. Can I add one Dialog instance to my landscape without any changes to my SAP Server ??? ..... My dialog instance will be in a new host.
My hardware SAP Server is: 16 GB RAM, 500 GB RAID 5 for my database, four processors.
What could be my Dialogue Instance hardware?
I have read than I must install with sapinst and select Dialogue Instance and follow instructions. Are there any others considerations?? .....
Do I must install SQL Server in the host Dialog instance ??.
Please if you have some suggestions.
Regards.Hello Jose,
You can install your dialog instance without doing any change to the existing setup as you have mentioned its on a seprate new host.
Two CPU's and 8GB memory would be fine for your dialog instance.It all depends on your requirement.
Yes you need to install the dialog instance using SAPINST, its kool and sapinst would take care of all.
You need not install any SQL server in the dialog instance host only you need to have a SQL client installed but that would be taken care by SAPINST.
Hope this would clarify your query.
Thanks and Regards,
-Bijesh. -
Printing from additional dialog instance didn't works
Hello to all!
I installed a new dialog instance and found that I can't print anything from this instance.
I see an error in the SP01:
Log:
I think that it could be a permission problems. How can I checked it ?
Also I found that I have too /usr/sap/EW3/SYS/global/ directory.
One on the central instance and second on the dialog instance host. So I have too spool catalogs. My instances has no any shared directories.
Could it be a problem too ?
Thanks a lot for helping !Hi Igor
1. Is this any error message in SM21 log? on ST22 any dumps?
2. At the time of the releasing the printouts what is the status of Spool work process status? and also how many Spool work process are you having in the one SID?
BR
SS -
FSDB CM repository is not accesible from KM content in dialog instance
Hello, we have installed a dialog instance in our EP60 system.
When we connect using this dialog instance, we can not access to this KM repository content type (FSDB Km content).
Our central instance name is portalts01(you can see in Windows Landscape System ), and our dialog instance is name portalpr02
Here is the properties of one of these ("de_viaje"):
View "de_viaje"
Description
Prefix (must start with /) * /de_viaje
Persistence Mode * fsdb
Repository ID in Database * de_viaje
Root Directory E:\repositorios\de_viaje
Root Directory for Versions E:\repositorios\de_viaje_v
Security Manager AclSecurityManager
ACL Manager Cache ca_rsrc_acl
Windows Landscape System portalts01
Cache ca_cm
Cache for small content(<32KB) not set
Any idea to make visible in both instances ?
Thanks in advance
Jose MonsalveHi Ray,
Deploying a repository manager means a hot KM deployment, which isn't supported at all, see https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bb1f18be-0801-0010-ffa0-e3495f7401bc and SAP note 894884. After such a deployment, the KM is restarted, but you have some kind of "shadow KM" in memory, which leads for most things to an unpredictable behaviour.
In contrast to the documents reffered to above, also the standard KM delivery from SAP still behaves in an uncontrolled way for many issues.
That's why after a KM hot deployment, you should restart your server if you realize anything "unusual". A workaround is to debug your code and using the hot code replacement feature (which only works in some situations, but that's better than nothing...).
Hope it helps
Detlev -
Multiple dialog instances on same host for different System
Dear Sir,
I install two dialog instances on same host ,one for DEV one for QAS.
First I install dialog instance for DEV and startup with no error.
Second dialog instance for QAS install with success end ,but can not start dispatchers.
Service
sapmsDEV 3600/tcp # SAP System Message Port
sapmsQAS 3601/tcp # SAP System Message Port
sapdp01s 4701/tcp # SAP System Dispatcher Security Port
sapgw01s 4801/tcp # SAP System Gateway Security Port
sapdp00 3200/tcp # SAP System Dispatcher Port
sapdp00s 4700/tcp # SAP System Dispatcher Security Port
sapgw00 3300/tcp # SAP System Gateway Central Instance Port
sapgw00s 4800/tcp # SAP System Gateway Security Port
Disp_dev
***LOG Q0I=> NiPConnect2: SiPeekPendConn (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 8716]
ERROR => MsIAttachEx: NiBufConnect to sap-qas/sapmsQAS failed (rc=NIECONN_REFUSED) [msxxi.c 633]
***LOG Q0L=> DpLoopInit, nomscon () [dpxxdisp.c 1549]
Stderr
D:\usr\sap\QAS\D01\work>ntscmgr start MSSQLSERVER -m sap-qas
failure: StartService, NT ErrorMessage: An instance of the service is already running. StartService SUCCESS
D:\usr\sap\QAS\D01\work>ntscmgr start SQLSERVERAGENT -m sap-qas
failure: StartService, NT ErrorMessage: An instance of the service is already running. StartService SUCCESS
It seem that first startup dialog instance already start MSSQLSERVER -m sap-dev and SQLSERVERAGENT -m sap-dev, so next instance can not start again ,and cause NICONN_REFUSED.
Could someone help me?
Thanks
Regards,
MattIt appears to be possible, at least in IDM 7.1
The release notes and Installation guide reference a setting called waveset.serverId that you set in your application server startup script like so:
-Dwaveset.serverId=Name
This would allow each JVM to identify itself differently from any others running on the same physical server.
I haven't tried this yet myself, so caveat emptor.
Jason -
Problem with OAS Instance Name y Host Name to create trial ssl certificate
Hi, everyone
I have a problem when creating a trial ssl certificate from Verisign page, affer a live assistance, that page rejected my CSR generated from OAS, saying thay my common name has invalid characters.
My Oracle Application Server installation name: Instance.HostName is:
IAS_IND01.ind-internet
So, Verisign told me this name can't contain "_" or "-" characters for example.
I need to know if it's possible to change the instance name and if OAS host name changes also if i change server's host name.
I wouldn't like to reinstall all over again.
Please help.
Regards
DavidHi,
No your AS server will not automatic. even if you change your host name.
If U 'll try to change your host name, be carefull when U 'll try to start you AS instacne
it ' not start anymore , AS user hosts fill to get full quallified name of your host.
U 've two choices
-1 delete your AS, then change your hosts name, then new installtion of AS
2- If U 've exprience with AS, just breng your AS down, change your hosts name,
U 'll need to do some changes in your AS, just read admininstrator Guide.
Cheers,
Hamdy -
Hello all,
yesterday I got one task in that I have to stored procedure for getting host name, host instance and status of that host is it running or stopped.
any body knows where exactly, In which table this details are there in BizTalk databases.
thanksStatus of the host instance is not stored in the SQL database for you to query the status using stored procedure. You have to either use Powershell or WMI to get the status.
In SQL, following table contains the details about the host like Name, LoginName, IsDisables etc but status of the host instance is not stored in the database.
SELECT * FROM BizTalkMgmtDb..adm_HostInstance
Powershell to get the status:
http://axonolympus.nl/?page_id=186&post_id=969&cat_id=6&lang=en
WMI to get the status:
https://msdn.microsoft.com/en-us/library/aa561820.aspx?f=255&MSPPError=-2147217396
https://msdn.microsoft.com/en-us/library/aa578621.aspx
Regards,
M.R.Ashwin Prabhu
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply. -
How to get Host name and SQL Instance Name by T-SQL
I am using SQL 2000, 2005 and 2008. I have few multi instances SQL servers. I would like to gather following information:
Host Name
SQL Instance Name
SQL Version
Server1
Server1
SQL 2000
Server1
Server1\ABC
SQL 2005
Server1
Server1\XYZ
SQL 2008
Server2
Server2
SQL 2008
Is there any way I can get it by T-SQL? Any help would be appreciated.
Thanks
SaumenSELECT
SERVERPROPERTY('MachineName') AS [ServerName],
SERVERPROPERTY('ServerName') AS [ServerInstanceName],
SERVERPROPERTY('InstanceName') AS [Instance],
SERVERPROPERTY('Edition') AS [Edition],
SERVERPROPERTY('ProductVersion') AS [ProductVersion],
Left(@@Version, Charindex('-', @@version) - 2) As VersionName
|
Blog: MSBICOE.com |
MCITP - BI, SQL Developer & DBA
Hate to mislead others, if I'm wrong slap me. Thanks! -
Email subject line with Alert unique Identifier,host name, instance name
Is there any way that i can set the following information in the notification email subject line,
Alert Unique Category,
Host name,
instance name.
Please advise.
Thanks.Yes I did look under the email customization section. But i am unable to get how to place alert Unique ID with in the subject line as i don't see any variable to place under it.
Please advise.
Thanks. -
How to install additional dialog instance on a separate host in unix?
Hi Friends,
We have BW 3.5/oracle on AIX. Any body can help me'how to install additional abap dialog instance on a seperate AIX host'?
Any help would be appreciated
Thanks,
MohanYou'll need to install a Dialog or Application server...
You can find the instructions on how to install an application server for BW at SAP MArketplace.
Go to https://websmp205.sap-ag.de/instguides -> SAP NetWeaver -> Release 04 -> Instalation -> SAP BW
Hope this help!
Juan Reyes -
How can I find the Host Name and Instance #
I am having trouble finding the host name and instance #. Thanks in advance.
Hi Kyle,
Hope you are doing good.
if it is the R/3 server, the easiest option would be to navigate to /nSm51 .
Hope this helps.
Kind Regards,
Hemanth
SAP AGS
Maybe you are looking for
-
Hi Can any one post sample FI Customised report to test it on my system Regards Nanda
-
Non-automatic send in Apple Mail?
My wife has switched! That's the good news. Now we're trying to get her into the Mac groove. On her PC in Outlook there was a switch that allowed her messages to not be sent but put into an outbox where she could later send from there. Is there an op
-
Issue 377: IndexOutOfBoundsException in ApplyRequestValuesPhase
https://javaserverfaces.dev.java.net/issues/show_bug.cgi?id=377 I don't seem to be able to add comments to this issue, so I'm putting this here instead. Let me know if I'm being slow and could have commented on the issue. We've also seen this bug usi
-
Numeric value deviates from legal range
Dear Experts, I am facing this error(Numeric value deviates from legal range (ODBC -1015) [131-183]) while copying P.O. to GRPO. Plz help on this. Any suggestion will be highly appreciated. Regards, Ravi
-
PS 7 locks when certain action is selected
I have had this happen before but can't remember the fix. I'll write it down this time if someone can help me. As far as I can tell everything works except this... Open an image, any image. Select "Image": Select "Adjustments" Select "Levels"....The