Dialogue instance not starting up after performing stack upgrade.

Dear Experts,
We have performed stack upgrade on ERP 6.0 EHP5 system. In configuration phase we have not got the option to update dialog instances.
We proceeded without that option and completed the upgrade successfully but the dialog instance is not getting started.
Kernel level got upgraded in all instance with the same level. Below is the work process log content of dialog instance.
Loading DB library '/usr/sap/MMD/D10/exe/dboraslib.so' ...
M *** ERROR => DlLoadLib()==DLENOACCESS - dlopen("/usr/sap/MMD/D10/exe/dborasli
b.so") FAILED
"I/O error mapping in '/usr/sap/MMD/D10/exe/dboraslib.so'." [dlux.c       445
B *** ERROR => Couldn't load library '/usr/sap/MMD/D10/exe/dboraslib.so'
[dbcon.c      5768]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 008192) [thxxhead.c   1519]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thx
xhead.c   11532]
As per SUM guide we need to uninstall the dialog instances before downtime and re-install the dialog instances after upgrade but we didn't uninstalled dialog instances before downtime.
Kindly let me know if there is any other process start up the dialog instance with out going for re-installing it.
Also suggest on re-installing the dialog instance since we didn't uninstalled dialog instances before downtime.
Thanks,
Bharath.

Dear Divyanshu,
Please find the work process log of dialog instance.
trc file: "dev_w0", trc level: 1, release: "721"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
M sysno 04
M sid MMD
M systemid 274 (HP (IA-64) with HP-UX)
M relno 7210
M patchlevel 0
M patchno 300
M intno 20020600
M make single threaded, Unicode, 64 bit, optimized
M profile /sapmnt/MMD/profile/MMD_D10_msdprd
M pid 266
M
M
M Fri Oct 3 02:46:33 2014
M kernel runs with dp version 139000(ext=121000) (@(#) DPLIB-INT-VERSION-139000-UC)
M length of sys_adm_ext is 592 bytes
M ThStart: taskhandler started
M ThTHPInit: thp initialized
M ThInit: initializing DIA work process W0
M ***LOG Q01=> ThInit, WPStart (Workp. 0 1 266) [thxxhead.c 1349]
M ThInit: running on host msdprd
M calling db_connect ...
B Loading DB library '/usr/sap/MMD/D10/exe/dboraslib.so' ...
M *** ERROR => DlLoadLib()==DLENOACCESS - dlopen("/usr/sap/MMD/D10/exe/dboraslib.so") FAILED
"I/O error mapping in '/usr/sap/MMD/D10/exe/dboraslib.so'." [dlux.c 445]
B *** ERROR => Couldn't load library '/usr/sap/MMD/D10/exe/dboraslib.so'
[dbcon.c 5768]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 008192) [thxxhead.c 1519]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 11532]
M
M Info for wp 0
M
M pid = 266
M severity = 0
M status = 0
M stat = WP_NEW
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M req.req_info =
M req.tid = -1
M req.uid = 4294967295
M req.mode = 255
M req.len = 0
M req.rq_id = 65535
M req.rq_source =
M last_tid = 0
M last_uid = 0
M last_mode = 0
M locked semaphores (), locking ()
M act_cs_count = 1
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M ThIErrHandle: current request:
M
M -IN-- sender_id ? tid -1 wp_ca_blk -1 wp_id -1
M -IN-- action - uid -1 appc_ca_blk -1 type -
M -IN-- new_stat NO_CHANGE mode 255 len 0 rq_id -1
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 867]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 302]
sapcpe.log of dialog instance
2014/10/03 02:45:39
sapcpe version UC: @(#) $Id: //bas/721_REL/src/ccm/sapstart/sapxxcpe.c#21 $ SAP
Command line:
0: /usr/sap/MMD/SYS/exe/run/sapcpe
1: pf=/sapmnt/MMD/profile/MMD_D10_msdprd
Trace level (profile): 1
** INFO: Try to find file table sapcpeft (default:sapcpeft)
** INFO: Try to find file table in the central directory /usr/sap/MMD/SYS/exe/run/sapcpeft
** INFO: Found file table: /usr/sap/MMD/SYS/exe/run/sapcpeft
source: /usr/sap/MMD/SYS/exe/run
target: /usr/sap/MMD/D10/exe
Checking the files in the file table for copy type
** INFO: file /usr/sap/MMD/SYS/exe/run/db4cncl is not existing and status -copy when file exists- is set
** INFO: file /usr/sap/MMD/SYS/exe/run/dbdb2slib.so is not existing and status -copy when file exists- is set
** INFO: file /usr/sap/MMD/SYS/exe/run/dbdb2slib9.so is not existing and status -copy when file exists- is set
** INFO: file /usr/sap/MMD/SYS/exe/run/dbdb2slibx.so is not existing and status -copy when file exists- is set
** INFO: file /usr/sap/MMD/SYS/exe/run/dbdb4slib.so is not existing and status -copy when file exists- is set
** INFO: file /usr/sap/MMD/SYS/exe/run/dbinfslib.so is not existing and status -copy when file exists- is set
** INFO: file /usr/sap/MMD/SYS/exe/run/dbsldb4ccm.so is not existing and status -copy when file exists- is set
** INFO: file /usr/sap/MMD/SYS/exe/run/libsecude.so is not existing and status -copy when file exists- is set
** INFO: file /usr/sap/MMD/SYS/exe/run/setdb4pwd is not existing and status -copy when file exists- is set
** INFO: file /usr/sap/MMD/SYS/exe/run/xdnxdaapi.so is not existing and status -copy when file exists- is set
** INFO: no extern File-List defined. Look for the default File-List(s).
Checking File-List(s).
** INFO: File-List "/usr/sap/MMD/SYS/exe/run/instance.lst" exists.
** INFO: File-List "/usr/sap/MMD/SYS/exe/run/instancedb.lst" exists.
** INFO: File-List "/usr/sap/MMD/SYS/exe/run/tools.lst" does not exist.
** INFO: File-List "/usr/sap/MMD/SYS/exe/run/inhouse.lst" does not exist.
** INFO: File-List "/usr/sap/MMD/SYS/exe/run/dbclient.lst" does not exist.
** INFO: File-List "/usr/sap/MMD/SYS/exe/run/igsexe.lst" exists.
** INFO: File-List "/usr/sap/MMD/SYS/exe/run/sapcrypto.lst" does not exist.
Current list file: see table below
ActualizeLocalFileOrDir: instance.lst (FPM:0x0)
ActualizeLocalFile: instance.lst
ActualizeLocalFileOrDir: sapmanifest.mf (FPM:0x0)
ActualizeLocalFile: sapmanifest.mf
ActualizeLocalFileOrDir: saproot.sh (FPM:0x0)
ActualizeLocalFile: saproot.sh
ActualizeLocalFileOrDir: scsclient.lst (FPM:0x0)
ActualizeLocalFile: scsclient.lst
ActualizeLocalFileOrDir: j2eeinst.lst (FPM:0x0)
ActualizeLocalFile: j2eeinst.lst
ActualizeLocalFileOrDir: sapmanifestj2ee.mf (FPM:0x0)
ActualizeLocalFile: sapmanifestj2ee.mf
ActualizeLocalFileOrDir: scs.lst (FPM:0x0)
ActualizeLocalFile: scs.lst
ActualizeLocalFileOrDir: webdispinst.lst (FPM:0x0)
ActualizeLocalFile: webdispinst.lst
ActualizeLocalFileOrDir: gateway.lst (FPM:0x0)
ActualizeLocalFile: gateway.lst
ActualizeLocalFileOrDir: disp+work (FPM:0x1)
ActualizeLocalFile: disp+work
*** ERROR: CopyFile: write <dst> failed: -1 <> 1048576, 28, No space left on device, [sapxxcpe.c:2714]
*** ERROR: ActualizeLocalFile: FAILED /usr/sap/MMD/SYS/exe/run/disp+work -> /usr/sap/MMD/D10/exe/disp+work (rc = 2), 28, No space left on device, [sapxxcpe.c:2528]
ActualizeLocalFileOrDir: rsyn.bin (FPM:0x1)
ActualizeLocalFile: rsyn.bin
ActualizeLocalFileOrDir: ABAP.pad (FPM:0x1)
ActualizeLocalFile: ABAP.pad
ActualizeLocalFileOrDir: aci_ABAP.pad (FPM:0x1)
ActualizeLocalFile: aci_ABAP.pad
ActualizeLocalFileOrDir: aci_ABAP.gram (FPM:0x1)
ActualizeLocalFile: aci_ABAP.gram
ActualizeLocalFileOrDir: R3trans (FPM:0x1)
ActualizeLocalFile: R3trans
*** ERROR: CopyFile: write <dst> failed: -1 <> 1030984, 28, No space left on device, [sapxxcpe.c:2714]
*** ERROR: ActualizeLocalFile: FAILED /usr/sap/MMD/SYS/exe/run/R3trans -> /usr/sap/MMD/D10/exe/R3trans (rc = 2), 28, No space left on device, [sapxxcpe.c:2528]
ActualizeLocalFileOrDir: R3ta (FPM:0x0)
ActualizeLocalFile: R3ta
*** ERROR: CopyFile: write <dst> failed: -1 <> 1048576, 28, No space left on device, [sapxxcpe.c:2714]
*** ERROR: ActualizeLocalFile: FAILED /usr/sap/MMD/SYS/exe/run/R3ta -> /usr/sap/MMD/D10/exe/R3ta (rc = 2), 28, No space left on device, [sapxxcpe.c:2528]
ActualizeLocalFileOrDir: R3check (FPM:0x0)
ActualizeLocalFile: R3check
*** ERROR: CopyFile: write <dst> failed: -1 <> 704256, 28, No space left on device, [sapxxcpe.c:2714]
*** ERROR: ActualizeLocalFile: FAILED /usr/sap/MMD/SYS/exe/run/R3check -> /usr/sap/MMD/D10/exe/R3check (rc = 2), 28, No space left on device, [sapxxcpe.c:2528]
ActualizeLocalFileOrDir: tp (FPM:0x0)
ActualizeLocalFile: tp
ActualizeLocalFileOrDir: dipgntab (FPM:0x0)
ActualizeLocalFile: dipgntab
*** ERROR: CopyFile: write <dst> failed: -1 <> 1048576, 28, No space left on device, [sapxxcpe.c:2714]
*** ERROR: ActualizeLocalFile: FAILED /usr/sap/MMD/SYS/exe/run/dipgntab -> /usr/sap/MMD/D10/exe/dipgntab (rc = 2), 28, No space left on device, [sapxxcpe.c:2528]
ActualizeLocalFileOrDir: saplicense (FPM:0x1)
ActualizeLocalFile: saplicense
*** ERROR: CopyFile: write <dst> failed: -1 <> 1048576, 28, No space left on device, [sapxxcpe.c:2714]
*** ERROR: ActualizeLocalFile: FAILED /usr/sap/MMD/SYS/exe/run/saplicense -> /usr/sap/MMD/D10/exe/saplicense (rc = 2), 28, No space left on device, [sapxxcpe.c:2528]
ActualizeLocalFileOrDir: saplikey (FPM:0x1)
ActualizeLocalFile: saplikey
*** ERROR: CopyFile: write <dst> failed: -1 <> 620472, 28, No space left on device, [sapxxcpe.c:2714]
*** ERROR: ActualizeLocalFile: FAILED /usr/sap/MMD/SYS/exe/run/saplikey -> /usr/sap/MMD/D10/exe/saplikey (rc = 2), 28, No space left on device, [sapxxcpe.c:2528]
ActualizeLocalFileOrDir: sapcpeft (FPM:0x0)
ActualizeLocalFile: sapcpeft
ActualizeLocalFileOrDir: startsap (FPM:0x0)
ActualizeLocalFile: startsap
*** ERROR: CopyFile: write <dst> failed: -1 <> 92600, 28, No space left on device, [sapxxcpe.c:2714]
*** ERROR: ActualizeLocalFile: FAILED /usr/sap/MMD/SYS/exe/run/startsap -> /usr/sap/MMD/D10/exe/startsap (rc = 2), 28, No space left on device, [sapxxcpe.c:2528]
ActualizeLocalFileOrDir: stopsap (FPM:0x0)
ActualizeLocalFile: stopsap
*** ERROR: CopyFile: write <dst> failed: -1 <> 92600, 28, No space left on device, [sapxxcpe.c:2714]
*** ERROR: ActualizeLocalFile: FAILED /usr/sap/MMD/SYS/exe/run/stopsap -> /usr/sap/MMD/D10/exe/stopsap (rc = 2), 28, No space left on device, [sapxxcpe.c:2528]
ActualizeLocalFileOrDir: jdbcconnect.jar (FPM:0x0)
ActualizeLocalFile: jdbcconnect.jar
ActualizeLocalFileOrDir: SAPCAR (FPM:0x0)
ActualizeLocalFile: SAPCAR
*** ERROR: CopyFile: write <dst> failed: -1 <> 1048576, 28, No space left on device, [sapxxcpe.c:2714]
*** ERROR: ActualizeLocalFile: FAILED /usr/sap/MMD/SYS/exe/run/SAPCAR -> /usr/sap/MMD/D10/exe/SAPCAR (rc = 2), 28, No space left on device, [sapxxcpe.c:2528]
ActualizeLocalFileOrDir: rslgsend (FPM:0x1)
ActualizeLocalFile: rslgsend
*** ERROR: CopyFile: write <dst> failed: -1 <> 249984, 28, No space left on device, [sapxxcpe.c:2714]
*** ERROR: ActualizeLocalFile: FAILED /usr/sap/MMD/SYS/exe/run/rslgsend -> /usr/sap/MMD/D10/exe/rslgsend (rc = 2), 28, No space left on device, [sapxxcpe.c:2528]
ActualizeLocalFileOrDir: rslgcoll (FPM:0x1)
ActualizeLocalFile: rslgcoll
*** ERROR: CopyFile: write <dst> failed: -1 <> 324120, 28, No space left on device, [sapxxcpe.c:2714]
*** ERROR: ActualizeLocalFile: FAILED /usr/sap/MMD/SYS/exe/run/rslgcoll -> /usr/sap/MMD/D10/exe/rslgcoll (rc = 2), 28, No space left on device, [sapxxcpe.c:2528]
ActualizeLocalFileOrDir: gwrd (FPM:0x1)
Kindly suggest.
Thanks,
Bharath.

Similar Messages

Apps services not starting up after Linux OS upgrade to 5.0

Hi guys,
I'm actually new to APPS DBA and i'm stuck with this prob for the past few days...I searched a lot but couldn't find a solution to it...could u pls help me out...
Actually, the Linux OS was upgraded from 4.0 to 5.0 and the old instance that was workin on 4.0 is now having trouble in 5.0.
I got the database started up, but when i tried to start up the services, but some of the services doesn't seem to get started...i've posted the error log file below..any suggestions r welcome...
>
Setting service Oracle Discoverer services DEL_server1 to mode 2
Executing service control script:
/oracle/d01/oracle/delcomn/admin/scripts/DEL_server1/addisctl.sh start
Timeout specified in context file: 300 second(s)
script returned:
addisctl.sh version 115.14
/oracle/d01/oracle/delora/8.0.6/vbroker/bin/osagent
Osagent is already running.
OAD is already running.
Failed to start locator.
Cannot bind to OAD. Re-starting...
OAD is stopped
Osagent is stopped
Unable to stop locator. No process-id file found.
Unable to stop gatekeeper. No process-id file found.
Unable to stop any Discoverer Sessions. No process-id file found.
Unable to stop any Discoverer Preference. No process-id file found.
Unable to stop any Discoverer Collector. No process-id file found.
/oracle/d01/oracle/delora/8.0.6/vbroker/bin/osagent
Started osagent.
Osagent logs messages to the file /oracle/d01/oracle/delora/8.0.6/discwb4/util/osagent.log.
Waiting for OAD to start...
Started OAD.
OAD logs messages to the file /oracle/d01/oracle/delora/8.0.6/discwb4/util/oad.log.Failed to start locator.
Registering Discoverer Session
Registering the Collector
Applying preferences from file : /oracle/d01/oracle/delora/8.0.6/discwb4/util/pref.txt
Finished applying preferences
Closing down registry..
Registry File sync...
Registering Discoverer Preference Repository
addisctl.sh: exiting with status 1
.end std out.
/oracle/d01/oracle/delora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version >GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
/oracle/d01/oracle/delora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version >GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
/oracle/d01/oracle/delora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version >GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
/oracle/d01/oracle/delora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version >GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
.end err out.
[Service Control Execution Report]
The report format is:
<Service> <Script> <Status>
Oracle Apache Server DEL_server1 adapcctl.sh Started
OracleTNSListener80APPS_DEL_server1 adalnctl.sh Started
OracleConcMgrDEL_server1 adcmctl.sh Started
OracleFormsServer-Forms60DEL_server1 adfrmctl.sh Started
OracleReportServer-Rep60_DEL adrepctl.sh Started
Oracle Metrics Client DEL_server1 adfmcctl.sh Started
Oracle Metrics Server DEL_server1 adfmsctl.sh Started
Oracle Fulfillment Server DEL_server1 jtffmctl.sh Started
Oracle Discoverer services DEL_server1 addisctl.sh Failed
Oracle Restricted Apache Server DEL_server1 adaprstctl.sh Disabled
Oracle Apache Server DEL_server1 for PL/SQL adapcctl.sh Disabled
Oracle TCF SocketServer DEL_server1 adtcfctl.sh Disabled
Oracle ICSM DEL_server1 ieoicsm.sh Disabled
ServiceControl is exiting with status 1

This was the output my friend...
/etc/hosts
Do not use 127.0.0.1 for the server - this should be localhost only
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost
xxx.xx.x.xx server
/etc/sysconfig/network
NETWORKING=yes
NETWORKING_IPV6=yes
HOSTNAME=server.xxx.com
/etc/sysconfig/networking/profiles/default/network
THIS FILE SHOULD NOT EXIST
uname -r
2.6.18-8.el5
query rpm for glibc, compat, openmotif, setarch
glibc-common-2.5-12
glibc-headers-2.5-12
glibc-2.5-12
glibc-devel-2.5-12
compat-libcwait-2.1-1
java-1.4.2-gcj-compat-1.4.2.0-40jpp.112
compat-libstdc++-egcs-1.1.2-1
setarch-2.0-1.1
hostname
This must be a fully qualified domain name like aaa.bbb.com
server.xxx.com
gcc version
Using built-in specs.
Target: i386-redhat-linux
Configured with: ../configure prefix=/usr mandir=/usr/share/man infodir=/usr/share/info enable- >shared enable-threads=posix enable-checking=release with-system-zlib enable-__cxa_atexit >disable-libunwind-exceptions enable-libgcj-multifile enable->languages=c,c++,objc,obj->c++,java,fortran,ada enable-java-awt=gtk disable-dssi enable-
plugin with-java-home=/usr/lib/jvm/java-1.4.2-gcj-1.4.2.0/jre with-cpu=generic --host=i386-
redhat-linux
Thread model: posix
gcc version 4.1.1 20070105 (Red Hat 4.1.1-52)
g++ version
Using built-in specs.
Target: i386-redhat-linux
Configured with: ../configure prefix=/usr mandir=/usr/share/man infodir=/usr/share/info enable-
shared enable-threads=posix enable-checking=release with-system-zlib enable-__cxa_atexit >disable-libunwind-exceptions enable-libgcj-multifile --enable-languages=c,c++,objc,obj-
c++,java,fortran,ada enable-java-awt=gtk disable-dssi enable-plugin with-java-home=/usr/lib/jvm
/java-1.4.2-gcj-1.4.2.0/jre with-cpu=generic host=i386-redhat-linux
Thread model: posix
gcc version 4.1.1 20070105 (Red Hat 4.1.1-52)
LANG - this should NOT be set for running the install
en_US.UTF-8
LD_LIBRARY_PATH
/oracle/d01/oracle/delora/8.0.6/network/jre11/lib/i686/native_threads:/oracle/d01/oracle/delora/8.0.6
/network/jre11/lib/linux/native_threads:/oracle/d01/oracle/delappl/cz/11.5.0/bin:/oracle/d01/oracle/delora
/8.0.6/lib:/usr/X11R6/lib:/usr/openwin/lib
LD_ASSUME_KERNEL - this should be 2.4.19
Check for 3006854
./script.sh: line 62: syntax error: unexpected end of file

IPhoto does not start up after upgrading

On my new iMac iPhoto does not start up after migrating. Upgrade from iPhoto 6/Snow Leopard > Lion 10.7.1 with iPhoto 9.1.5. When the conversion is finished I can see the new library, it works allright. And with packet-inspection (or how is that called in English) all maps & data seems to be OK; I can check the seperate pics.
But: iPhoto won't start up a second time (grey screen with infinite spinning wait cursor). The same thing is happening when I add a new library and drop in some pictures.
What can cause this problem?

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

TS2570 Mac will not start up after software up date, just screen with Apple logo and spinning icon?

Mac will not start up after software up date, just screen with Apple logo and spinning icon? I have tried safe start up, unplugged all other cables, no luck?

How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

My MacBook Pro will not start up after entering correct password.

My MacBook Pro will not start up after entering password. Circle with an X in it and 'cancel' below it is on bottom of screen. When clicking on cancel, nothing happens. This just started last night.

Hi MJTOOTS,
Since you are getting to the login screen, it is booting past the "gray screen" phase, so try the steps in this article, like a Safe Boot.
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://support.apple.com/kb/ts1417
You may also want to see if any of your Login Items are causing an issue.
OS X Mavericks: Open items automatically when you log in
http://support.apple.com/kb/PH14173
Thank you for visiting Apple Support Communities.
Nubz

Firefox does not start up after an automatic update. Every time i try to open it, it just prompts the Mozilla Crash Reporter.

Firefox does not start up after an automatic update. Every time i try to open it, it just prompts the Mozilla Crash Reporter.
''Add-ons: {972ce4c6-7e08-4474-a285-3208198ce6fd}:3.6.10
BuildID: 20100914125854
CrashTime: 1290192405
EMCheckCompatibility: true
FramePoisonBase: 00000000f0de0000
FramePoisonSize: 65536
InstallTime: 1287124738
ProductName: Firefox
ReleaseChannel: release
SecondsSinceLastCrash: 422
StartupTime: 1290192405
Theme: classic/1.0
Throttleable: 1
Vendor: Mozilla
Version: 3.6.10
This report also contains technical information about the state of the application when it crashed.''
Same thing happens when i click restart.
No difference when i run it in Safe mode. And it won't let me create a new profile either. Is there anyway else i can extract my bookmarks? This is driving me crazy!

Did the crash reporter send any crash reports? 
You can see the crash reports in this folder:
"C:\Users\<user>\AppData\Roaming\Mozilla\Firefox\Crash Reports"
See: http://kb.mozillazine.org/Breakpad
See also [[Firefox crashes when you open it]]
Create a new profile as a test to check if your current profile is causing the problems. 
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]] 
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" 
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files) 
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox 
If that still causes the same problem then do a clean reinstall and remove the Firefox program folder.
* Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data when uninstalling.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
See:
* http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

2007 Mac Book pro Shuts down at startup attempt. Tried reloading OSX and will not start up after that.

My Mac Book Pro started having issues. I tried to relaod the operating system and it worked for a moment. When I tried to do a time machine back up it failed.
Now itr Shuts down at startup attempt. Tried reloading OSX and will not start up after that.

Dr.Conga,
did you try to do a Time Machine backup from your MacBook Pro, or a Time Machine restoration to it?
Are you trying to reload your current version of OS X (10.7.4, to judge from your signature), or are you trying to reload the version of Mac OS X that came on the grey installation DVDs that originally came with your MacBook Pro?

After downloading mountain lion the internet does not start automatically after start or restart but if I use diagnostics it starts is there a simpler solution

After downloading mountain lion the internet does not start automatically after start or restart but if I use diagnostics it starts is there a simpler solution?

Extensions can sometimes be the cause of problems. If the problem does not occur in Safe Mode, then you can disable your extensions one-by-one until you find out which one is causing the problem. See [[Troubleshooting extensions and themes]]

Logic pro not starting up after install.

Ive tried to install Logic pro twice and both time it will not start up after install. can someone tell me what is the best way to install this program correctly? should i just pay apple more money to install the program for me?

I have exactly the same problem. Whilst 8.0.1 would hang during startup without displaying the splash screen intermittently 8.0.2 crashs every time a few seconds after displaying the splash screen.
Although my computer is almost 6 years old it is perfectly adequate for audio work. I hope this is fixed soon. Unimpressed with the quality control.

New Macbook Pro does not start up after updating...HELP!!!

Hi,
My new Macbook Pro does not start up after it got updated. The first time I used it, it was perfect. I updated it and restarted it when it told me to but it doesn't boot. It shows an apple and a spinning circle when it turns on but that's it.
Can somebody please help me?

You should probably post your question in the MacBook Pro discussions:
http://discussions.apple.com/category.jspa?categoryID=190

R12-oafm, forms and oacore not starting up after IP adress change

Heloo my friend;
I had problem while i changed my server IP...when i start adstrtall.sh script its end wiht :
adstrtal.sh: Exiting with status 3 and adoafmctl.sh: exiting with status 204 ...soo my login page doesnt come to explorer and it gives HTTP 404 page not found error
So here is the solution:
Cause
The OC4J lock files contains the IP adress, after the ip adress change the lock files includes the wrong Ip adress which caused the OJ4J to fail
Solution
1 - open a new shell and set your apps environment
2 - cd $ADMIN_SCRIPTS_HOME
3 - adopmnctl.sh stop
4 - check if it is really down: ps -ef grep grep opm
5 - delete the following:
rm -fr $INST_TOP/ora/10.1.3/j2ee/oacore/persistence/*
rm -fr $INST_TOP/ora/10.1.3/j2ee/oafm/persistence/*
rm -fr $INST_TOP/ora/10.1.3/j2ee/forms/persistence/*
6 - adopmnctl.sh start
7 - check if the issue has been resolved: adapcctl.sh status
I hope its helpful
Helios

Helios,
Thanks for sharing this, but please note that sharing the contents of Metalink notes is illegal. Instead, point to the Note ID or give a hint.
Note: 412980.1 - oafm,forms and oacore not starting up after IP adress change
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=412980.1

My MBP will not start up after restart

My MBP (late 2011 running 10.8.something - receintly updated) will not start up after I had to do a restart to install Blackberry Desktop software (for my wife, I promise). It chimes, gets past the grey screen with the Apple logo and then just sits on the login screen but with the background only, no account or anything. My mouse pointer is there and moves but nothing else. Anyone have any idea?

Reboot holding the Shift key down on a wired or built in keyboard, this is Safe Mode and will disable the at boot kernel extension file that Blackberry installed.
When you get in uninstall the software using their uninstaller. Then reboot normally again, visit their website for a update if there is one.
Blackberry/RIM software has been causing issues around here lately.
If your machine refuses to boot normally again, then run through this list 1-8,, by #8 your machine should be booting normally again.
Step by Step to fix your Mac

Issue in portal after abap stack upgrade

Hi,
Except travel and expenditure, everything is working fine after abap stack upgrade. we have restarted abap and portal 3-4 times, we use abap ume. we are getting error:
Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 18:57_27/02/12_0004_16184750
defaulttrace:
\#39;<System.Access.WAS.protocol>://<System.Access.WAS.hostname>/sap/bc/webdynpro/<WebDynproNamespace>/<WebDynproApplication>/;sap-ext-sid=<ESID[url_ENCODE]>?sap-ep-iviewhandle=007<ESID[HASH]>&sap-wd-configId=<WebDynproConfiguration>&sap-ep-iviewid=<IView.ShortID>&sap-ep-pcdunit=<IView.PCDUnit.ShortID>&sap-client=<System.client>&sap-language=<Request.Language>&sap-accessibility=<User.Accessibility[SAP_BOOL]>&sap-rtl=<LAF.RightToLeft[SAP_BOOL]>&sap-ep-version=<Portal.Version[url_ENCODE]>&sap-wd-tstamp=<$TimeStamp>&<FPNInfo[IF_false PROCESS_RECURSIVE]>&sap-explanation=<User.Explanation[SAP_BOOL]>&<StylesheetIntegration[IF_true PROCESS_RECURSIVE]>&<Authentication>&<DynamicParameter[PARAMETER_MAPPING PROCESS_RECURSIVE]>&<ForwardParameters[QUERYSTRING]>&<ApplicationParameter[PROCESS_RECURSIVE]>&\#39;; the problem occured at position 310. Cannot process expression <System.client> because Invalid System Attribute:
System: &\#39;SAP_LocalSystem&\#39;,
Attribute: &\#39;client&\#39;.
 at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContentPass(AbstractIntegratorComponent.java:125)
 at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContent(AbstractIntegratorComponent.java:98)
 at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
 at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
 at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
 ... 29 more
#1.5 #00144FF922BF006B00000028000021AF0004B9F256577D3A#1330350388639#com.sap.portal.prt.runtime#sap.com/irj#com.sap.portal.prt.runtime#J2EE_ADM_EDJ#73##ERPDEV_EDJ_16184750#J2EE_ADM_EDJ#d2df5090614511e1cbb100144ff922bf#SAPEngine_Application_Thread[impl:3]_20##0#0#Error##Java###07:16_27/02/12_0004_16184750
[EXCEPTION]
#1#com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Unable to parse template &\#39;<System.Access.WAS.protocol>://<System.Access.WAS.hostname>/sap/bc/webdynpro/<WebDynproNamespace>/<WebDynproApplication>/;sap-ext-sid=<ESID[url_ENCODE]>?sap-ep-iviewhandle=007<ESID[HASH]>&sap-wd-configId=<WebDynproConfiguration>&sap-ep-iviewid=<IView.ShortID>&sap-ep-pcdunit=<IView.PCDUnit.ShortID>&sap-client=<System.client>&sap-language=<Request.Language>&sap-accessibility=<User.Accessibility[SAP_BOOL]>&sap-rtl=<LAF.RightToLeft[SAP_BOOL]>&sap-ep-version=<Portal.Version[url_ENCODE]>&sap-wd-tstamp=<$TimeStamp>&<FPNInfo[IF_false PROCESS_RECURSIVE]>&sap-explanation=<User.Explanation[SAP_BOOL]>&<StylesheetIntegration[IF_true PROCESS_RECURSIVE]>&<Authentication>&<DynamicParameter[PARAMETER_MAPPING PROCESS_RECURSIVE]>&<ForwardParameters[QUERYSTRING]>&<ApplicationParameter[PROCESS_RECURSIVE]>&\#39;; the problem occured at position 310. Cannot process expression <System.client> because Invalid System Attribute:
System: &\#39;SAP_LocalSystem&\#39;,
Attribute: &\#39;client&\#39;.
 at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContentPass(AbstractIntegratorComponent.java:125)
 at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContent(AbstractIntegratorComponent.java:98)
 at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
 at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
 at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
 at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
 at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
 at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
 at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
 at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
 at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
 at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
 at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
 at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:235)
 at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:541)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:430)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
 at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
 at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
 at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
#1.5 #00144FF922BF006A0000001E000021AF0004B9F25959F274#1330350439133#com.sap.mw.jco#sap.com/tcwddispwda#com.sap.mw.jco#ESSEMP2#288##ERPDEV_EDJ_16184750#ESSEMP2#907dd803614911e1968500144ff922bf#SAPEngine_Application_Thread[impl:3]_6##0#0#Info##Plain###[WD JCO API] WebDynproExtension.addClientPool(SAP_R3_SelfServiceGenerics_ESSEMP2_EN_useSSO_(J2EE16184700)ID1578814350DB10044082816827940554End_9513223) with lang 'EN' and languages vector {EN,EN}#
#1.5 #00144FF922BF0062000016D7000021AF0004B9F26C7D264E#1330350760207#com.sap.tc.cbs.server.proc.RequestHandler##com.sap.tc.cbs.server.proc.RequestHandler####n/a##eed5c7ef614411e1996800144ff922bf#Thread[SAPEngine_System_Thread[impl:5]_Group - 207,10,SAPEngine_System_Thread[impl:5]_Group]##0#0#Error#1#/Applications/CBSRequestLog/RequestProcessing/id1736980#Plain###Error! The following problem(s) occurred during request processing:#
#1.5 #00144FF922BF0062000016D9000021AF0004B9F26C7D286A#1330350760208#com.sap.tc.cbs.server.proc.RequestHandler##com.sap.tc.cbs.server.proc.RequestHandler####n/a##eed5c7ef614411e1996800144ff922bf#Thread[SAPEngine_System_Thread[impl:5]_Group - 207,10,SAPEngine_System_Thread[impl:5]_Group]##0#0#Error#1#/Applications/CBSRequestLog/RequestProcessing/id1736980#Java###Error! Request failed due to failure of child requests#1#Request failed due to failure of child requests#
#1.5 #00144FF922BF0062000016DB000021AF0004B9F26C7D2DAC#1330350760209#com.sap.tc.cbs.server.proc.RequestHandler##com.sap.tc.cbs.server.proc.RequestHandler####n/a##eed5c7ef614411e1996800144ff922bf#Thread[SAPEngine_System_Thread[impl:5]_Group - 207,10,SAPEngine_System_Thread[impl:5]_Group]##0#0#Error#1#/Applications/CBS/Service#Java###Request failed due to failure of child requests
[EXCEPTION]
#1#Request failed due to failure of child requests
 at com.sap.tc.cbs.server.dao.impl.Request.checkForFailedChildRequests(Request.java:494)
 at com.sap.tc.cbs.server.dao.impl.Request.capture(Request.java:398)
 at com.sap.tc.cbs.server.proc.RequestHandler.process(RequestHandler.java:138)
 at com.sap.tc.cbs.server.proc.RequestHandler.run(RequestHandler.java:121)
 at com.sap.tc.cbs.server.rt.threads.PerpetualRunnable.run(PerpetualRunnable.java:109)
#1.5 #00144FF922BF006200001777000021AF0004B9F26FD235FC#1330350816114#com.sap.tc.cbs.server.proc.RequestHandler##com.sap.tc.cbs.server.proc.RequestHandler####n/a##eed5c7ef614411e1996800144ff922bf#Thread[SAPEngine_System_Thread[impl:5]_Group - 207,10,SAPEngine_System_Thread[impl:5]_Group]##0#0#Error#1#/Applications/CBSRequestLog/RequestProcessing/id1736988#Plain### Error! The following problem(s) occurred during request processing:#
#1.5 #00144FF922BF006200001779000021AF0004B9F26FD23863#1330350816114#com.sap.tc.cbs.server.proc.RequestHandler##com.sap.tc.cbs.server.proc.RequestHandler####n/a##eed5c7ef614411e1996800144ff922bf#Thread[SAPEngine_System_Thread[impl:5]_Group - 207,10,SAPEngine_System_Thread[impl:5]_Group]##0#0#Error#1#/Applications/CBSRequestLog/RequestProcessing/id1736988#Plain### Error! The following error occurred during request processing:The build failed due to wrong or incomplete arguments, passed to the build tool.
Please check CBS service parameters against manual.#
#1.5 #00144FF922BF006600001720000021AF0004B9F26FFE4EC5#1330350819004#com.sap.tc.cbs.server.proc.RequestHandler##com.sap.tc.cbs.server.proc.RequestHandler####n/a##f556c50a614411e19dc200144ff922bf#Thread[SAPEngine_System_Thread[impl:5]_Group - 208,10,SAPEngine_System_Thread[impl:5]_Group]##0#0#Error#1#/Applications/CBSRequestLog/RequestProcessing/id1736987#Plain### Error! The following problem(s) occurred during request processing:#
#1.5 #00144FF922BF006600001722000021AF0004B9F26FFE50DC#1330350819004#com.sap.tc.cbs.server.proc.RequestHandler##com.sap.tc.cbs.server.proc.RequestHandler####n/a##f556c50a614411e19dc200144ff922bf#Thread[SAPEngine_System_Thread[impl:5]_Group - 208,10,SAPEngine_System_Thread[impl:5]_Group]##0#0#Error#1#/Applications/CBSRequestLog/RequestProcessing/id1736987#Plain### Error! The following error occurred during request processing:The build failed due to wrong or incomplete arguments, passed to the build tool.
Please check CBS service parameters against manual.#
#1.5 #00144FF922BF005F0000179B000021AF0004B9F2714FA0E9#1330350841110#com.sap.tc.cbs.server.proc.RequestHandler##com.sap.tc.cbs.server.proc.RequestHandler####n/a##eeb712eb614411e1926f00144ff922bf#Thread[SAPEngine_System_Thread[impl:5]_Group - 206,10,SAPEngine_System_Thread[impl:5]_Group]##0#0#Error#1#/Applications/CBSRequestLog/RequestProcessing/id1736989#Plain###Error! The following problem(s) occurred during request processing:#
#1.5 #00144FF922BF005F0000179D000021AF0004B9F2714FA2FC#1330350841111#com.sap.tc.cbs.server.proc.RequestHandler##com.sap.tc.cbs.server.proc.RequestHandler####n/a##eeb712eb614411e1926f00144ff922bf#Thread[SAPEngine_System_Thread[impl:5]_Group - 206,10,SAPEngine_System_Thread[impl:5]_Group]##0#0#Error#1#/Applications/CBSRequestLog/RequestProcessing/id1736989#Java###Error! Request failed due to failure of child requests#1#Request failed due to failure of child requests#
#1.5 #00144FF922BF005F0000179F000021AF0004B9F2714FA854#1330350841111#com.sap.tc.cbs.server.proc.RequestHandler##com.sap.tc.cbs.server.proc.RequestHandler####n/a##eeb712eb614411e1926f00144ff922bf#Thread[SAPEngine_System_Thread[impl:5]_Group - 206,10,SAPEngine_System_Thread[impl:5]_Group]##0#0#Error#1#/Applications/CBS/Service#Java###Request failed due to failure of child requests
[EXCEPTION]
#1#Request failed due to failure of child requests
 at com.sap.tc.cbs.server.dao.impl.Request.checkForFailedChildRequests(Request.java:494)
 at com.sap.tc.cbs.server.dao.impl.Request.capture(Request.java:398)
 at com.sap.tc.cbs.server.proc.RequestHandler.process(RequestHandler.java:138)
 at com.sap.tc.cbs.server.proc.RequestHandler.run(RequestHandler.java:121)
 at com.sap.tc.cbs.server.rt.threads.PerpetualRunnable.run(PerpetualRunnable.java:109)
cbs.5:
#1.5 #00144FF922BF006E00009D0900000EEE0004B9E196C2E0E9#1330278454976#/Applications/CBS/Service##com.sap.tc.cbs.server.rt.sync.AccessOrc####n/a##446ca3fd5c7b11e195a000144ff922bf#Thread[CBS AccessQueue Orchestrator,10,SAPEngine_System_Thread[impl:5]_Group]##0#0#Error#1#/Applications/CBS/Service#Plain###Access orchestrator failure#
#1.5 #00144FF922BF006E00009D1100000EEE0004B9E196C49580#1330278455088#/Applications/CBS/Service##com.sap.tc.cbs.server.rt.sync.AccessOrc####n/a##446ca3fd5c7b11e195a000144ff922bf#Thread[CBS AccessQueue Orchestrator,10,SAPEngine_System_Thread[impl:5]_Group]##0#0#Error#1#/Applications/CBS/Service#Plain###Access orchestrator failure#
#1.5 #00144FF922BF006E00009D1900000EEE0004B9E196C664FD#1330278455207#/Applications/CBS/Service##com.sap.tc.cbs.server.rt.sync.AccessOrc####n/a##446ca3fd5c7b11e195a000144ff922bf#Thread[CBS AccessQueue Orchestrator,10,SAPEngine_System_Thread[impl:5]_Group]##0#0#Error#1#/Applications/CBS/Service#Plain###Access orchestrator failure#
#1.5 #00144FF922BF006E00009D2100000EEE0004B9E196C81B65#1330278455319#/Applications/CBS/Service##com.sap.tc.cbs.server.rt.sync.AccessOrc####n/a##446ca3fd5c7b11e195a000144ff922bf#Thread[CBS AccessQueue Orchestrator,10,SAPEngine_System_Thread[impl:5]_Group]##0#0#Error#1#/Applications/CBS/Service#Plain###Access orchestrator failure#
#1.5 #00144FF922BF00310000000000000DA90004B9F0155B9416#1330340708455#/Applications/CBS/Administration##com.sap.tc.cbs.service.CBSFrame#######SAPEngine_System_Thread[impl:5]_82##0#0#Info#1#com.sap.tc.cbs.service.CBSFrame#Java###Starting CBS service on node ...#1#16184750#
Pls suggest

Hi James Bond
From the exception above, it can be seen that the AppIntegrator iView is trying to run on the "SAP_LocalSystem" where it should be running on a "real" backend system.
Please check what is the System alias in this iView and make sure it points on a backend system which has the same alias in the Portal System landscape.
Hope that helps,
Robin Hood.

Java is not starting up after upgradation in dual stack system

Hi,
We have sucessfully upgraded xi(netweaver2004s) to EHP1, after upgradation server0 is not starting.
default trace file in server0 shows the following error
Core service com.sap.security.core.ume.service failed .J2EE Engine cannot be started
But abap engine is running sucessfully.
We have sucessfully completed EHP 1 installation

Hi Venkat,
As per the log it seems that ume services are not started as a result java engine is not starting..
Please also check the secure store settings that all passwords are correct there ...
Please go thorugh below link:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/20/361941edd5ef23e10000000a155106/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/64/351941edd5ef23e10000000a155106/frameset.htm
Thanks
Sunny

JAVA Stack not starting up after System Copy

Hi,
We have done the system copy from Production to Sandbox and we are facing an issue with the JAVA Stack not starting up.
Following is the error in the SAPInst log file.
INFO
2014-09-07 18:06:48.86 [iaxxbfile.cpp:538]
CIaOsFile::chmod_impl(0755)
Authorizations set for /usr/sap/CS0/DVEBMGS00/data/icmandir/its/lsgui/images/list/symbols.
INFO
2014-09-07 18:06:50.494 [iaxxbfile.cpp:538]
CIaOsFile::chmod_impl(0755)
Authorizations set for /usr/sap/CS0/DVEBMGS00/data/icmandir/its/lsgui/js.
INFO
2014-09-07 18:06:50.819 [iaxxbfile.cpp:538]
CIaOsFile::chmod_impl(0755)
Authorizations set for /usr/sap/CS0/DVEBMGS00/data/icmandir/its/lsgui/js/texts.
ERROR
2014-09-07 18:06:55.22 [syxxcfsmgt.cpp:211]
CSyFileSystemMgtImpl::getNode(const CSyPath & path, CSyPath::NodeType nodeType) const
lib=syslib module=syslib
FSL-02015 Node /usr/sap/CS0/DVEBMGS00/data/stat46 does not exist.
INFO
2014-09-07 18:46:32.15 [iaxxbfile.cpp:538]
CIaOsFile::chmod_impl(0755)
Authorizations set for /usr/sap/CS0/DVEBMGS00/work/co.sapCS0_DVEBMGS00.
INFO
2014-09-07 18:46:35.895 [iaxxbfile.cpp:538]
CIaOsFile::chmod_impl(0755)
Authorizations set for /usr/sap/CS0/DVEBMGS00/work/dw.sapCS0_DVEBMGS00.
WARNING
2014-09-07 18:46:36.218
CJSlibModule::writeWarning_impl()
Broken link /usr/sap/CS0/DVEBMGS00/work/ig.sapCS0_DVEBMGS00 -> /usr/sap/CS0/DVEBMGS00/exe/igswd_mt detected.
Please guide.
Thanks,
CJ

For system of the J2EE stack did you use sapinst export and import ?
If the Java doesn't start then check the trace files (dev_server, std_server, bootstrap logs) present at /usr/sap/CS0/DVEBMGS00/work
Regards
RB

Dialogue instance not starting up after performing stack upgrade.

Similar Messages

Maybe you are looking for