Dialup to Windows host with MPPE

We are trying to use Mac OS X 10.4 to dial into a Windows RAS Server which is requiring us to use MPPE Encryption. This seems to be a stumbling point with Apple's PPPD, as it seems to only be supported by the PPTP layer. When we try to connect, we get these telling entries in the log:
rcvd [CCP ConfReq id=0x4 <mppe -H +M +S +L -D +C>]
sent [CCP ConfRej id=0x4 <mppe -H +M +S +L -D +C>]
We've tried setting manual options in /etc/ppp/options, such as mppe-128, but we then get messages like so:
MPPE required, but kernel has no support.
sent [LCP TermReq id=0x2 "MPPE required but not available"]
So, basically, I'm wondering if there's ANY way to establish this connection on the MacOS. Whether it's obscure command lines or us having to recompile pppd from source. Any help is appreciated

The topic, "Duplicating a Database on a Remote Host with a Different Directory Structure" can be found at http://docs.oracle.com/cd/B19306_01/backup.102/b14191/rcmdupdb.htm#i1006672
This information should provide you the step by step process to follow including when on Windows.
HTH -- Mark D Powell --

Similar Messages

How duplicate ora11 on windows to another host with different directory structure

Hi,
I need help.
I want to duplicate db (11.2) running on windows from server A to Server B
Directory structures on server A and Server B are different;
my steps
on server A
1.backup database plus archivelog delete input;
2.insert into table t values(1);
3.commit;
4.backup archive log all;
On Server B
5.copy backup and archive logs from server A to server B (c:\backup\temp)
6.create folders C:\oracle\oradata\bamboo
7.oradim –new –sid bamboo -- (verified service is running)
8. created pfile.ora with param (db_name=bamboo)
9.SET oracle_SID=bamboo
10.sqlplus /as sysdba
11.startup nomount pfile='(c:\backup\temp\pfile.ora'
12.C:\oracle\product\11.2.0\db_1\database>rman auxiliary /
result
..connected to auxiliary database: SBDBT02W (DBID=186082786, not open) --could it be the fact that I tried to execute code bellow?
My understanding at this point I should be connected to 'bamboo' -- my new database, what steps did I miss?
I expect
..connected to auxiliary database: bamboo ( not mounted)
bellow is code that I was going to run on Server B
RUN
SET NEWNAME FOR DATAFILE 1 TO 'C:\oracle\oradata\bamboo\SYSTEM01.DBF';
SET NEWNAME FOR DATAFILE 2 TO 'C:\oracle\oradata\bamboo\SYSAUX01.DBF';
SET NEWNAME FOR DATAFILE 3 TO 'C:\oracle\oradata\bamboo\UNDOTBS01.DBF';
SET NEWNAME FOR DATAFILE 4 TO 'C:\oracle\oradata\bamboo\USERS01.DBF';
SET NEWNAME FOR DATAFILE 5 TO 'C:\oracle\oradata\bamboo\EXAMPLE01.DBF';
DUPLICATE DATABASE TO bamboo
UNTIL TIME "TO_DATE('11/24/2013 13:18:02', 'MM/DD/YYYY HH24:MI:SS')"
BACKUP LOCATION 'C:\backup\temp'
NOFILENAMECHECK;
when I executed it on Server B ,I got following error
Starting Duplicate Db at 25-NOV-13
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 11/25/2013 11:27:36
RMAN-05500: the auxiliary database must be not mounted when issuing a DUPLICATE
command
I looking for steps by step instruction for duplicating db to another windows host with different directory structure.
Thank you
Alex

The topic, "Duplicating a Database on a Remote Host with a Different Directory Structure" can be found at http://docs.oracle.com/cd/B19306_01/backup.102/b14191/rcmdupdb.htm#i1006672
This information should provide you the step by step process to follow including when on Windows.
HTH -- Mark D Powell --

I can't install Windows 7 key over KMS host with WS 2012 R2

Hi
I have a KMS Host with Windows Server 2012 R2. I don't have problems installing keys for Windows 8, Windows 8.1, Office 2013, Windows Server 2012 R2. However, when I tried install keys for Windows 7, Windows 2008 R2 and Windows 2008, I have the next message:
C:\slmgr.vbs /ipk <Windows 7 key>
Error: 0xC004F050 The Software Licensing Service reported that the product key is invalid
I've installed the keys from the same source.
Gary

Hi
I have a KMS Host with Windows Server 2012 R2. I don't have problems installing keys for Windows 8, Windows 8.1, Office 2013, Windows Server 2012 R2. However, when I tried install keys for Windows 7, Windows 2008 R2 and Windows 2008, I have the next message:
C:\slmgr.vbs /ipk <Windows 7 key>
Error: 0xC004F050 The Software Licensing Service reported that the product key is invalid
I've installed the keys from the same source.
Gary
For a KMShost with the OS=WS2012R2, you cannot, and, there is no need to, install any other Windows KMShost keys. The WS2012R2 KMShost key, by itself, will activate the KMShost OS, and will also enable the issuing of activations for ALL Windows KMSclients.
Office KMS features are different, and do need to be installed for Office KMSclient activations.
The error you are experiencing is expected, and is a result of your attempt to perform an unnecessary configuration step.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

NTLM is not working with EP 6 SP 9 on Windows 2003 with IIS 6.

I installed EP 6 SP 9 on windiows 2003 server with IIS version 6.
Configures IisProxy.xml for redirection for filter irj. When I make a call to default website, it in turn calls server with irj filter.
Portal page comes up and requesting me to enter user id password.
I made the changes mentioned by some of the web logs in this site.
I configured HeaderVariableLoginModule an and added as explined by Gregory Wolf on the following topic.
Integrated Windows Authentication with SAP EP 6.0 SP 3 and higher.
I see following log from Ep 6 SP 9 log file security.log from directory E:\usr\sap\DEV\JC00\j2ee\cluster\server0\log\system.
security#Plain###No user name provided.#
#1.5#000C2953326B00430000000100000A780003F358EF2132DE#1111988099323#/System/Security#sap.com/irj#com.sap.engine.services.security#Guest#18####200d0cb09f4b11d9926a000c2953326b#SAPEngine_Application_Thread[impl:3]_37##0#0#Info#1#com.sap.engine.services.security#Plain###Cannot log info about the logon attempt because the user name is null.#
#1.5#000C2953326B00440000000000000A780003F3591D22E168#1111988846027#/System/Security#sap.com/irj#com.sap.engine.services.security#Guest#18####dd1f09b19f4c11d98e98000c2953326b#SAPEngine_Application_Thread[impl:3]_7##0#0#Info#1#com.sap.engine.services.security#Plain###No user name provided.#
#1.5#000C2953326B00440000000100000A780003F3591D22E215#1111988846027#/System/Security#sap.com/irj#com.sap.engine.services.security#Guest#18####dd1f09b19f4c11d98e98000c2953326b#SAPEngine_Application_Thread[impl:3]_7##0#0#Info#1#com.sap.engine.services.security#Plain###Cannot log info about the logon attempt because the user name is null.#
#1.5#000C2953326B00450000000000000A780003F359227DE92E#1111988935662#/System/Security#sap.com/irj#com.sap.engine.services.security#Guest#18####128c40e09f4d11d9acb7000c2953326b#SAPEngine_Application_Thread[impl:3]_28##0#0#Info#1#com.sap.engine.services.security#Plain###No user name provided.#
#1.5#000C2953326B00450000000100000A780003F359227DEDC7#1111988935662#/System/Security#sap.com/irj#com.sap.engine.services.security#Guest#18####128c40e09f4d11d9acb7000c2953326b#SAPEngine_Application_Thread[impl:3]_28##0#0#Info#1#com.sap.engine.services.security#Plain###Cannot log info about the logon attempt because the user name is null.#
Lots of weblogs are pointing to remote_user value in IisProxy.log file. I am not able to see that.
I also tried switching IIS 6 to run as IIS 5 and did not help much at all.
Please help me on the issue.
I did not change authschemes.xml file.
My IisProxy.xml file looks as follows:
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE ISAPI-config[
     <!ELEMENT ISAPI-config ( filter, extension, ( mapping | config )* )>
     <!ATTLIST ISAPI-config
          version CDATA #REQUIRED
     >
     <!ELEMENT filter (log-path?)>
     <!ATTLIST filter
          name CDATA #IMPLIED
          log-level CDATA "3"
          log-flags CDATA "0x00000001"
          debug-flags CDATA "0x00008000"
          priority ( high | medium | low ) "high"
          extension-url CDATA "/scripts/IisProxy.dll"
          authentication ( skip | normal | forward ) "normal"
          remote-address ( skip | forward ) "skip"
     >
     <!ELEMENT extension (
          keystore-dir?,
          log-path?,
          data-path?,
          trace-path? )>
     <!ATTLIST extension
          name CDATA #IMPLIED
          log-level CDATA "1"
          log-flags CDATA "0"
          debug-flags CDATA "0"
          access ( filter | direct | both ) "filter"
     >
     <!ELEMENT keystore-dir (#PCDATA)>
     <!ELEMENT log-path (#PCDATA)>
     <!ELEMENT data-path (#PCDATA)>
     <!ELEMENT trace-path (#PCDATA)>
     <!ELEMENT mapping (
          source+,
          target,
          compress-types*,
          protocol-header?,
          certificate-header?,
          cert-chain-header?,
          cipher-header?,
          keysize-header?,
          keystore-path?,
          log-path?,
          data-path? )>
     <!ATTLIST mapping
          name CDATA #IMPLIED
          log-level CDATA "1"
          log-flags CDATA "0"
          debug-flags CDATA "0"
          keep-alive ( true | false ) "true"
          use-continue ( true | false ) "true"
          close-socket ( true | false ) "true"
          close-socket-delay CDATA "1000"
          thread-count CDATA "100"
          max-socket-age CDATA "37"
     >
     <!ELEMENT source (protocol, host?, port?, prefix, new-prefix?)>
     <!ATTLIST source
          access ( filter | direct | both ) "filter"
     >
     <!ELEMENT protocol (#PCDATA)>
     <!ELEMENT host (#PCDATA)>
     <!ELEMENT port (#PCDATA)>
     <!ELEMENT prefix (#PCDATA)>
     <!ELEMENT new-prefix (#PCDATA)>
     <!ELEMENT target (protocol, host, port)>
     <!ELEMENT compress-types (#PCDATA)>
     <!ATTLIST compress-types
          min-size CDATA "1024"
     >
     <!ELEMENT protocol-header (#PCDATA)>
     <!ELEMENT certificate-header (#PCDATA)>
     <!ELEMENT cert-chain-header (#PCDATA)>
     <!ELEMENT cipher-header (#PCDATA)>
     <!ELEMENT keysize-header (#PCDATA)>
     <!ELEMENT keystore-path (#PCDATA)>
     <!ELEMENT config ( source+ )>
]>
<ISAPI-config version="1.6">
     <filter name="IisProxy filter"/>
     <extension name="IisProxy extension" />
     <mapping name="IisProxy samples">
          <source>
               <protocol>http</protocol>
               <prefix>/irj</prefix>
          </source>
          <source>
               <protocol>http</protocol>
               <prefix>/Hello/</prefix>
          </source>
          <source>
               <protocol>http</protocol>
               <prefix>/Hello2/</prefix>
               <new-prefix>/Hello/</new-prefix>
          </source>
          <target>
               <protocol>http</protocol>
               <host>slcsepw04vd.pacificorp.us</host>
               <port>50000</port>
          </target>
          <compress-types>text/html, text/plain</compress-types>
     </mapping>
     <mapping name="Secure IisProxy samples">
          <source>
               <protocol>https</protocol>
               <prefix>/Hello/</prefix>
          </source>
          <target>
               <protocol>https</protocol>
               <host>localhost.your.corp</host>
               <port>8443</port>
          </target>
          <keystore-path>c:\sec\SAPSSLC.pse</keystore-path>
     </mapping>
     <config>
          <source>
               <protocol>http</protocol>
               <host>localhost</host>
               <prefix>/IisProxy</prefix>
          </source>
          <source>
               <protocol>https</protocol>
               <host>localhost</host>
               <prefix>/IisProxy</prefix>
          </source>
     </config>
</ISAPI-config>
Please help me. I am not sure what is missing. Please make a note that Portal version is EP 6 SP9 & Server is Windows 2003 with IIS 6.

I made the change as you requested and it did not help.
I do not see any remote_user entry in IisProxy.log file.
Please let me know the procedure to get REMOTE_USER into the IisProxy.log file.
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE ISAPI-config[
     <!ELEMENT ISAPI-config ( filter, extension, ( mapping | config )* )>
     <!ATTLIST ISAPI-config
          version CDATA #REQUIRED
     >
     <!ELEMENT filter (log-path?)>
     <!ATTLIST filter
          name CDATA #IMPLIED
          log-level CDATA "3"
          log-flags CDATA "0x00000001"
          debug-flags CDATA "0x00008000"
          priority ( high | medium | low ) "high"
          extension-url CDATA "/scripts/IisProxy.dll"
          authentication ( skip | normal | forward ) "normal"
          remote-address ( skip | forward ) "skip"
     >
     <!ELEMENT extension (
          keystore-dir?,
          log-path?,
          data-path?,
          trace-path? )>
     <!ATTLIST extension
          name CDATA #IMPLIED
          log-level CDATA "1"
          log-flags CDATA "0"
          debug-flags CDATA "0"
          access ( filter | direct | both ) "filter"
     >
     <!ELEMENT keystore-dir (#PCDATA)>
     <!ELEMENT log-path (#PCDATA)>
     <!ELEMENT data-path (#PCDATA)>
     <!ELEMENT trace-path (#PCDATA)>
     <!ELEMENT mapping (
          source+,
          target,
          compress-types*,
          protocol-header?,
          certificate-header?,
          cert-chain-header?,
          cipher-header?,
          keysize-header?,
          keystore-path?,
          log-path?,
          data-path? )>
     <!ATTLIST mapping
          name CDATA #IMPLIED
          log-level CDATA "1"
          log-flags CDATA "0"
          debug-flags CDATA "0"
          keep-alive ( true | false ) "true"
          use-continue ( true | false ) "true"
          close-socket ( true | false ) "true"
          close-socket-delay CDATA "1000"
          thread-count CDATA "100"
          max-socket-age CDATA "37"
     >
     <!ELEMENT source (protocol, host?, port?, prefix, new-prefix?)>
     <!ATTLIST source
          access ( filter | direct | both ) "filter"
     >
     <!ELEMENT protocol (#PCDATA)>
     <!ELEMENT host (#PCDATA)>
     <!ELEMENT port (#PCDATA)>
     <!ELEMENT prefix (#PCDATA)>
     <!ELEMENT new-prefix (#PCDATA)>
     <!ELEMENT target (protocol, host, port)>
     <!ELEMENT compress-types (#PCDATA)>
     <!ATTLIST compress-types
          min-size CDATA "1024"
     >
     <!ELEMENT protocol-header (#PCDATA)>
     <!ELEMENT certificate-header (#PCDATA)>
     <!ELEMENT cert-chain-header (#PCDATA)>
     <!ELEMENT cipher-header (#PCDATA)>
     <!ELEMENT keysize-header (#PCDATA)>
     <!ELEMENT keystore-path (#PCDATA)>
     <!ELEMENT config ( source+ )>
]>
<ISAPI-config version="1.6">
     <filter name="IisProxy filter" authentication="forward"/>
     <extension name="IisProxy extension" />
     <mapping name="IisProxy samples">
          <source>
               <protocol>http</protocol>
               <prefix>/irj</prefix>
          </source>
          <source>
               <protocol>http</protocol>
               <prefix>/Hello/</prefix>
          </source>
          <source>
               <protocol>http</protocol>
               <prefix>/Hello2/</prefix>
               <new-prefix>/Hello/</new-prefix>
          </source>
          <target>
               <protocol>http</protocol>
               <host>slcsepw04vd.pacificorp.us</host>
               <port>50000</port>
          </target>
          <compress-types>text/html, text/plain</compress-types>
     </mapping>
     <mapping name="Secure IisProxy samples">
          <source>
               <protocol>https</protocol>
               <prefix>/Hello/</prefix>
          </source>
          <target>
               <protocol>https</protocol>
               <host>localhost.your.corp</host>
               <port>8443</port>
          </target>
          <keystore-path>c:secSAPSSLC.pse</keystore-path>
     </mapping>
     <config>
          <source>
               <protocol>http</protocol>
               <host>localhost</host>
               <prefix>/IisProxy</prefix>
          </source>
          <source>
               <protocol>https</protocol>
               <host>localhost</host>
               <prefix>/IisProxy</prefix>
          </source>
     </config>
</ISAPI-config>
Please let me know what is missing.
Thanks.

Office 2013: Windows host process (Rundll32) has stopped working

Hi,
I have problems with adding additional e-mail address to my Outlook. When I open the Mail Control Panel Item, go to my Exchange Profile and add a new e-mail address I get a popup indicating that the Windows host process (Rundll32) has stopped working.
The only way of adding extra e-mail addresses is to remove my entire Outlook Profile. In the initial wizard I can add all Exchange mailboxes that I need (I have 3). After I've configured my Outlook profile I always receive the Rundll32 error. When I try
to create a second Outlook profile I still get the same error.
I've tried the following:
- Repair OST file
- Repair Office -> Control Panel and Online Repair
- Reinstall Office
- Reinstall my entire PC
It doesn't matter which e-mail address I add in the initial Outlook configuration wizard. I always receive the error when I try to add a new mailbox, even when I add a mailbox that does not exist (e.g. [email protected]).
Even after reinstalling my PC I still get the same error. I'm using Windows 8.1 (x64) and Office 2013 (32-bit) on a Lenovo W540. None of my colleagues have this issue. It's a domain joined PC and we are not using Roaming Profiles.
For troubleshooting I also created a local account on my laptop but I get the same issues with this account.

Hi,
I'm also using Office 2013 32-bit and Windows 8.1 64-bit on my computer but doesn't get this issue. As you mentioned you reinstalled your PC, the first thing I suggest is to make sure your Windows and Office have been up to date.
The second thing is to make sure you are using the system with an administrator account, this ensures you the enough permission.
There is a possibility that some 3rd-party programs are interfering with "Mail", we can try to perform a clean boot to determine whether background programs are interfering with this:
1.Swipe in from the right edge of the screen, and then tap Search. Or, if you are using a mouse, point to the lower-right corner of the screen, and then click
Search.
2.Type msconfig in the search box, and then tap or click
msconfig.
3.On the Services tab of the System Configuration
dialog box, tap or click to select the Hide all Microsoft services
check box, and then tap or click Disable all.
4.On the Startup tab of the System Configuration
dialog box, tap or click Open Task Manager.
5.On the Startup tab in Task Manager, for each startup item, select the item and then click
Disable.
6.Close Task Manager.
7.On the Startup tab of the System Configuration
dialog box, tap or click OK, and then restart the computer.
If in clean boot the issue doesn't exist, the issue was probably caused by the 3rd-party programs. For further information to troubleshoot, you can refer to this kb below:
http://support.microsoft.com/kb/929135
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Hyper V hosts with Cluster Shared Volume do not provide Shared VHDX ability

Hi there, i've configured a pair of Hyper V hosts (UCS B230 M2) with SAN-Boot and access to a Shared Fiber Channel LUN.
No matter what I try, when I add a SCSI Adapter and one VHDX virtual disk to a VM, the option for "Advanced" never shows up therefore I can not share the VHDX file between another VM, which prevents any VM based clustering from working (IE: Clustered
SQL server)
Here are the settings I have configured:
The LUN has been formatted with NTFS
The Hyper V hosts have been configured as a Windows Cluster with an IP address and the Fiber Channel LUN configured as a Cluster Shared Volume
I follows the guides below
Create a CSV
https://technet.microsoft.com/en-us/library/dn265980.aspx
Create a shared VHDX
https://technet.microsoft.com/en-us/library/dn282283.aspx
Further details:
Two HyperV server core hosts built
Both joined to AD
Both joined to a Windows failover cluster
One 2TB Fibre Channel LUN presented from an EMC VNX array to both hosts
LUN formatted as NTFS
LUN created as a Cluster Shared Volume
Cluster Shared Volume present on both HyperV hosts
VM created within the Cluster Shared Volume
VM Booted up and Windows 2012 has been installed
VM gracefully shut down
Through the HyperV Manager, going in to VM settings,create a SCSI adapter, create a new VHDX file inside the CSV, the “Advanced” option for the VHDX is not present, therefore the option to make the VHDX file shared is not available
I have followed all steps in the Microsft Technet pages to create a CSV and a VM with Shared VHDX
I’ve cleared all settings and restarted multiple times, but this option is not present

Hi Sir,
>>No matter what I try, when I add a SCSI Adapter and one VHDX virtual disk to a VM, the option for "Advanced" never shows up therefore I can not share the VHDX file between another VM
>>Yes we are using Hyper-V Server 2012 R2
As we know Hyper-v server 2012R2 is a free version without GUI , I'm afraid you are not using Win 8.1 or other windows server 2012R2 to manage that free version hyper-v server .
Shared vhdx is a new feature came with 2012R2 , if use previous windows to manage 2012R2 you will not see "advanced" option (The blue circle belongs 2012 , the red circle belongs to 2012R2 ):
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

How to install Oracle Grid Agent 11g into windows hosts ?

Hi there, I was not able to deploy management agents into windows hosts machines !
I followed steps below and I am getting these errors :
On windows 2003 server, I have downloaded grid agent here :
D:\grid\Windows_X64_Grid_Control_agent_download_11_1_0_1_0\windows_x64\agent
I have setup.exe file ! When I double click it, I got this message :
Only silent installation is supported search help.
Well, I did a lot of times setup.exe -silent -responseFile <path>additional_response.rsp and the setup process tells me that I am not following the security procedures.
I am newbie on Grid!
I don´t want deploy agent using deployment wizard due to security resctrictions, they do not allow openssh servers on windows servers.
Have you guys succeeded with this installation ? I mean, install fresh agent on single target windows server machine!
I would appreciate any help.
Tks.
Edson - CLARO

Edson,
what I would do is go for the cloning option.
On the OMS Server an Agent has been installed as part of the OMS installation.
Stop this Agent
AGENT_HOME/bin/emctl stop agent
Create a zip file from the agent11g folder
Copy it to a server where you want to install the Agent
unzip the folder in the location where you want to install
Restart the Agent you had stopped on your OMS server
AGENT_HOME/bin/emctl start agent
On the destination server
Then from the AGENT_HOME/oui/bin
runInstaller -clone -forceClone ORACLE_HOME=<full path of Agent Folder> ORACLE_HOME_NAME=OracleHomeAgent11g -noconfig -silent b_chainedInstall=false oracle.sysman.top.agent:s_installType=AGENT
Then from AGENT_HOME/bin/agentca -f
AGENT_HOME/root.sh (Under Unix this needs to be run as user root, not sure if this procedure is the same under Windows)
This is based on the procedure described in MOS note : How to Clone a Management Agent And Known Issues [ID 579156.1] which referes to a 10.2.0 Agent, but I have been able to use this procedure under Windows with a 11.1 Agent as well.
Goodluck
Regards
Rob
http://oemgc.wordpress.com

Migration of Oracle 32-bit to 64-bit on same Windows host.

Hi,
Title: Migration of Oracle 32-bit to 64-bit on same Windows host.
We have windows host x64 bit. Oracle is 10g 32 bit and we want to migrate it to 10g 64 bit. I would like to know the steps. Note 940811 is not clear enough.
Please help.
Many thanks,
Mohan.

Hi,
I think SAP Note 940811 is not relevant to your case as far as I understand your case in your previous thread because you are already on oracle 10.2 and there is no upgrade required.
Please check SAP note 192822 and please check below extract from this note:
      5. Can I switch to 64-bit, even though I already run the same oracle release on 32-bit?
      Yes. The only thing that needs to be done is
run del_ora.csh to delete the 32-bit software
install the 64-bit software
start the database.
As the wordsize changes with 64-bit, all pl-sql-predures should be recompiled.
      Therefore please run the following two scipts on db-level:
      @$ORACLE_HOME/rdbms/admin/utlip.sql -invalidates all plsql-procedures
      @$ORACLE_HOME/rdbms/admin/utlrp.sql -recreates the plsql-procedures with the new word size
Thanks
Sunny

Help - windows host process

hi there,
help please. I'm using windows 7 pro 64 bit. already updated to sp1.
somehow, every time I start the computer, show an error:
[Window Title]
Windows host process (Rundll32)
[Main Instruction]
Windows host process (Rundll32) has stopped working
[Content]
Windows can check online for a solution to the problem.
[V] View problem details [Check online for a solution and close the program] [Close the program]
I'm not sure whether it is same with vista issue, so I decided to make new post here.
kindly help me please.
thanks.

Hi,
To find out detailed information about this error, please look for the related event log and then copy here.
Anyway, to exclude influence of 3rd software and services, I recommend you to following the steps below:
Type msconfig in run
Click on Services tab, put a check in the "Hide all Microsoft services" checkbox.
Click on "Disable All" button.
Click on Startup tab, and then click on "Disable All" button again.
Press OK button and then "Restart" button on the following window.
After reboot, please check if this issue still occurs.
For detailed steps, you can refer to
http://support.microsoft.com/kb/331796
Thanks!
Andy Altmann
TechNet Community Support

Creating a DNS Record for a Host with Two or More IP???

Can we create DNS A Record for a Host with Two or More IP ... ( we like to use my website "mysite.com" pointing to two Ips )
Please help...

Sure, no worries.
In a production environment DNS will query always the first record it will stores in cache, you need to find a dynamic or NLB way to achieve the automatic fail over else when you will have an outage with the first IP, then you need to ask your clients to
clear the cache and register to DNS again, this i will not suggest in a production environment, lots of manual efforts and doesnt sound like a solution in a production environment, i would suggest you to explore windows NLB, it's easy to set and use the OS
license.
Thanks
Inderjit

TS2972 How do i get files into the library form a Windows host computer

How do I get files into the sharing library with a Windows host Computer? Other than buying another computer!

You use iTunes, though only specific formats are supported.
Which AppleTV modesl do you have? 1, 2 or 3?

Windows host cannot establish Ethernet link to Arch Router

This is a weird problem.
I have a Windows host about 20 meters away from my Arch Router, the Ethernet cable goes into the wall, with wall sockets, so it's a total of 3 cables (1 in wall, 1 @ router, 1 @ host). I've tested the Ethernet cables with a LAN tester, they are all fine. When I connect the host to a Linksys router using the same cables, an IP address is obtained and the link is up and running.
But when I connect the host to my Arch Router (an Arch computer with some network cards), no ethernet link at all is detected. No lights on the ethernet card of the host, and ethtool on the router reports the link being down. I have connected my laptop to this ethernet card of the router and it works just fine, I get an IP and I can surf the web etc.
I really have no clue why this other host cannot establish a link. Does anyone have a clue what the problem might be?

pyther is right. Check for Auto-MDIX support on your network cards.
What network cards are you using?
Rule of thumb:
Auto-MDIX is a requirement in the Gigabit Ethernet specification, so proper Gigabit capable cards will work 99% of the time whatever cable you use.
Fast Ethernet (100mbit) and below does not have Auto-MDIX in it's specification, so those 9 out of 10 of those cards will not perform it! When connecting these directly to another network card, use a cross-cable.
Also make sure the network cards are in working order. I assume the ArchRouter PC's network runs fine when you connect that to your Linksys router?

How to install 2 oracle homes on singl windows host

Hi Experts,
I am planning to install two sap R/3 4.7 ext200 SR1 instances on windows 2003. I already installed DEV instance & planning for QAS.
I am confused about how to install two ORACLE softwares on single windows host.
I search on internet there for windows they are pointing to the registry value
\HKEY_LOCAL_MACHINE
Software\Oracle\inst_loc.
I am not able to understand what I have to do with this ?
Can you please help me to understand & execute this.
Thanks,
Sachin

Sachin,
Go throuth this link to understand more about Oracle Inventory and Oracle Homes software update.
http://cs.ifmo.ru/~ad/Documentation/oracle-10g-lib-doc/em.101/b12140/3_oui_oracle_homes.htm#i1005634
The current entry is picked from the PATH vairable of the system and user that you have logged on. This is because you have already done 1 Oracle Installation on the host.
Keep in mind that you choose the correct oracle home while installing and in future updating Oracle software (patchset, Interim Pactches...)
You can give a seperate path for Oracle Inventory. Just go thru to the existing folder of OraInventory in Program files you will understand it better.
It is used to install and update the Oracle software in the oracle home that you will choose in your next step.
All the Best,
Nilesh

Virtualbox on windows host: how to install guest addtional

Hi all:
do i need to install the vbox kernel modual ?
can anyone point me some howto ?
there are quite a lot of documents on vbox on Linux host
i can't seem to find doc with a windows host
thanks

The host doesn't matter for installing guest additions.
If Linux is the guest os, just follow these instructions:
http://wiki.archlinux.org/index.php/Vir … _Additions

Accounting for Multiple Cygwin Paths for Windows Hosts

Hello everyone,
We are using EM12cR2 (installed on RHEL) but need to monitor a number of Windows hosts. For most Windows hosts, Cygwin is installed in the default path (C:\cygwin) but we also have Citrix XenApp servers that we would like to monitor but they do not have a C: drive, just M:. I've seen the settings file that allows someone to change the Cygwin path but I can't find information on whether or not you can add multiple paths to that line and what that syntax would be. I've also seen an older Citrix plug-in but I don't see anything stating it's compatibility with this version of EM. If I could, I would test out a number of scenarios in a lab environment but we don't have that option.
Does anyone know if it's possible to add multiple Cygwin paths (and what the syntax is), if the Citrix plug-in is compatible with EM12cR2, or if there's another way to do this that I'm not thinking of?
Thank you,
EMS

Hi ,
you have to update the following properties in $OMS_HOME/oui/prov/ssPaths_msplats.properties to reflect the new cygwin installation location.
eg.
From
SSH_PATH=C:/cygwin/bin/ssh.exe
SCP_PATH=C:/cygwin/bin/scp.exe
MKDIR_PATH=C:/cygwin/bin/mkdir.exe
SH_PATH=C:/cygwin/bin/sh.exe
CHMOD_PATH=C:/cygwin/bin/chmod.exe
TRUE=C:/cygwin/bin/true.exe
To
SSH_PATH=M:/cygwin/bin/ssh.exe
SCP_PATH=M:/cygwin/bin/scp.exe
MKDIR_PATH=M:/cygwin/bin/mkdir.exe
SH_PATH=M:/cygwin/bin/sh.exe
CHMOD_PATH=M:/cygwin/bin/chmod.exe
TRUE=M:/cygwin/bin/true.exe
thanks,
Prakash

Dialup to Windows host with MPPE

Similar Messages

Maybe you are looking for