DiB0070 I2C read failed errors on Sony playTV dual tuner.

Hi Guys,
As far as I can tell Googl'ing around this error has been aroung since 2008 in the dvb-usb-dib0700 driver.
I get the following in the log:
[ 271.882232] DiB0070 I2C write failed
[ 612.809450] DiB0070 I2C read failed
[ 792.722569] DiB0070 I2C write failed
[ 969.609201] perf samples too long (2515 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 2011.890312] DiB0070 I2C write failed
When there is enough of them in the log, the tuner stops working. It has crashed at the point as well, see:
[39237.817501] DiB0070 I2C read failed
[39648.715000] DiB0070 I2C write failed
[40324.499602] divide error: 0000 [#1] SMP
[40324.499637] Modules linked in: udf ctr ccm bnep rfcomm bluetooth parport_pc ppdev arc4 snd_hda_codec_hdmi snd_hda_codec_realtek rt2800usb rt2800lib crc_ccitt rt2x00usb rt2x00lib dvb_usb_dib0700 dib7000p dib0090 dib7000m dib0070 mac80211 snd_hda_intel dvb_usb snd_hda_codec dib8000 rc_imon_mce dvb_core cfg80211 snd_hwdep dib3000mc snd_pcm dibx000_common snd_seq_midi snd_rawmidi imon snd_seq_midi_event rc_core snd_seq snd_timer snd_seq_device hid_appleir joydev snd soundcore snd_page_alloc serio_raw asus_atk0110 lpc_ich mac_hid lp parport hid_generic usbhid hid pata_acpi radeon ttm drm_kms_helper firewire_ohci drm r8169 firewire_core crc_itu_t mii pata_marvell i2c_algo_bit
[40324.500094] CPU: 1 PID: 2605 Comm: kdvb-ad-0-fe-0 Not tainted 3.13.0-35-generic #62~precise1-Ubuntu
[40324.500144] Hardware name: System manufacturer P5Q-EM/P5Q-EM, BIOS 2203 07/08/2009
[40324.500189] task: ffff880079efb000 ti: ffff88007995a000 task.ti: ffff88007995a000
[40324.500231] RIP: 0010:[<ffffffffa0480b6a>] [<ffffffffa0480b6a>] dib7000p_set_dds+0x3a/0x140 [dib7000p]
[40324.500292] RSP: 0018:ffff88007995b928 EFLAGS: 00010246
[40324.500323] RAX: 0000000004000000 RBX: ffff880034fb6000 RCX: 0000000010624dd3
[40324.500363] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff880034fb79a0
[40324.500403] RBP: ffff88007995b968 R08: ffff88007995a000 R09: ffffea0001e16c00
[40324.500444] R10: ffffffff8156b26a R11: 0000000000000000 R12: 0000000000000000
[40324.500484] R13: 0000000000000000 R14: ffff880034fb6000 R15: 0000000004000000
[40324.500524] FS: 0000000000000000(0000) GS:ffff88007fc80000(0000) knlGS:0000000000000000
[40324.500570] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[40324.500603] CR2: 00007f1fe9d293d0 CR3: 0000000077c69000 CR4: 00000000000007e0
[40324.500643] Stack:
[40324.500656] 0000000000000040 0000000000000384 ffff88007995b968 ffff880034fb6000
[40324.500704] ffff880034fb6000 ffff880034fb6000 0000000000000002 0000000022739480
[40324.500750] ffff88007995b9b8 ffffffffa0480e9e ffff880078d3a8f0 0000000000000441
[40324.500797] Call Trace:
[40324.500818] [<ffffffffa0480e9e>] dib7000p_agc_startup+0x22e/0x480 [dib7000p]
[40324.500862] [<ffffffffa0483382>] dib7000p_set_frontend+0x72/0x1f0 [dib7000p]
[40324.500911] [<ffffffffa040e78e>] dvb_frontend_swzigzag_autotune+0x13e/0x350 [dvb_core]
[40324.500961] [<ffffffff8156b26a>] ? usb_control_msg+0xea/0x110
[40324.501002] [<ffffffffa040f8aa>] dvb_frontend_swzigzag+0x29a/0x3c0 [dvb_core]
[40324.501048] [<ffffffff810135da>] ? __switch_to+0x12a/0x4d0
[40324.501083] [<ffffffff810a5d2d>] ? set_next_entity+0xad/0xd0
[40324.501118] [<ffffffff810789ff>] ? try_to_del_timer_sync+0x4f/0x70
[40324.501155] [<ffffffff81078a72>] ? del_timer_sync+0x52/0x60
[40324.501191] [<ffffffff8175d345>] ? schedule_timeout+0x135/0x250
[40324.501228] [<ffffffff81078620>] ? call_timer_fn+0x160/0x160
[40324.501268] [<ffffffffa0412a64>] dvb_frontend_thread+0x454/0x7c0 [dvb_core]
[40324.501311] [<ffffffff810affd0>] ? __wake_up_sync+0x20/0x20
[40324.501351] [<ffffffffa0412610>] ? dvb_frontend_ioctl+0x160/0x160 [dvb_core]
[40324.501393] [<ffffffff8108fb59>] kthread+0xc9/0xe0
[40324.501423] [<ffffffff8108fa90>] ? flush_kthread_worker+0xb0/0xb0
[40324.501460] [<ffffffff8176ab7c>] ret_from_fork+0x7c/0xb0
[40324.501493] [<ffffffff8108fa90>] ? flush_kthread_worker+0xb0/0xb0
[40324.501528] Code: 7d f8 41 bf 00 00 00 04 48 89 5d d8 4c 89 65 e0 4c 89 6d e8 41 89 f5 4c 89 75 f0 49 89 fe e8 6e ff ff ff 31 d2 41 89 c4 44 89 f8 <41> f7 f4 8b 0d ad 67 00 00 41 89 c7 44 89 e8 c1 f8 1f 89 c3 44
[40324.501731] RIP [<ffffffffa0480b6a>] dib7000p_set_dds+0x3a/0x140 [dib7000p]
[40324.501776] RSP <ffff88007995b928>
[40324.516014] ---[ end trace 6a9fad8fe9eb61e2 ]---
Anyone know how I can fix this? I have tried upgrading to the latest kernel 2.13 and have compiled and installed the latest v4l drivers.
I have also tried vairous module parameters for the relevent modules. i.e
options dvb_usb disable_rc_polling=1
options dvb_usb_dib0700 force_lna_activation=1
options dvb_core dvb_powerdown_on_sleep=0
Nada!
Any help much appreciated.
Last edited by bmentink (2014-09-20 03:38:44)

The first thing to do is use smartctl to test the drive. Start with the short test ( smartctl -t short /dev/sdX ), and if it passes run the long test ( ... -t long ... ).

Similar Messages

Sony BRAVIA Call failed error message

I'm trying to use Skype on a Sony BRAVIA TV and with the CMU-BR100 camera installed. I cannot make a video or telephone call to another skype user. I get call failed error message for both video and telephone. Do I need to buy Skype credits to be able to use Skype ??

Shorty wrote:
Can anyone experiencing the 'call failed' issue comment on whether the problem occurs 100% of the time, or is it always within the first 10 minutes after powering on the TV?
Sorry.... Maybe I'm a bit thick, but do you mean 1/ switch the TV on and try Skype after 10 minutes? Or 2/ Try Skype within the 10 minutes? I'm happy to help with research if I can, even though I don't even switch this TV on anymore!
My issue is constant. I.E. I turn the power off at the socket, wait at least 10 seconds, turn on, start the TV and make a Skype call. That works..... ONCE. If I try to call a second contact, it gives the "call failed" message, without even waiting for any type of connection, or pausing for any timeout. If anyone tries to contact me, they get a "busy" message.
To be honest, I've not tried leaving the TV on for a while before trying. If I've nothing better to do over the next few days, I'll try that. I'm not that interested in it anymore. In fact... I don't like to see that TV in my living room and don't even use it!
Skype on my phone works better, with better video and sound quality. That's where I'm at.....
Maybe I'm on a downer tonight...

About Sun Fire E25K I2c read time out error

Hi,
Can anybody give me a breif explaination about the following errors
which capatured by Sun Fire E25K System Controller:
Nov 7 08:16:36 2006 E25K-ORADR-sc0 hwad[11914]: [1123
20621355893934396 ERR I2cComm.cc 410] I2c read time out - bus: 10,
address: 21
Nov 7 08:16:36 2006 E25K-ORADR-sc0 hwad[11914]: [1128
20621356152372741 ERR SelectPll.cc 292] Reading bus failed in address
0, ecode=1123
Nov 7 18:45:40 2006 E25K-ORADR-sc0 hwad[11914]: [1123
20659099583593289 ERR I2cComm.cc 410] I2c read time out - bus: 10,
address: 21
Nov 7 18:45:40 2006 E25K-ORADR-sc0 hwad[11914]: [1128
20659099584735868 ERR SelectPll.cc 138] Reading bus failed in address
0, ecode=1123
Nov 8 02:15:01 2006 E25K-ORADR-sc0 hwad[11914]: [1124
20686060070434628 ERR I2cComm.cc 1095] I2c write time out - bus: 10,
address: 21
Nov 8 02:15:01 2006 E25K-ORADR-sc0 hwad[11914]: [1129
20686060083304777 ERR SelectPll.cc 181] Writing bus failed in address
0, ecode=1124
What is the reason to cause "I2c read time out" ?
TIA.
Rgds,
Simon

Hello Simon,
these forums are user-to-user. The Fire E25K is definetely beyond the scope of these forums (too expensive, too critical for your business, too complex).
This system should be under Spectrum coverage (Platinum/Gold).
Open a service case !
Let's if you get any response to your posting on the Sun Managers mailing list.
Michael
Message was edited by:
MAALATFT

NI 845x USB: Error -301713 occurred at Property Node (arg 2) in General I2C Read.vi

Hello,
I am currently working with digital accelerometer LIS35DE from ST Microelectronics. I want to start with tests of this device. For that purpose I used NI 845x USB to connect with accelerometer via I2C. Unfortunately, when I made electrical connections and set up parameters of communication and run the program (I found it in examples) the following error occured:
Error -301713 occurred at Property Node (arg 2) in General I2C Read.vi
Possible reason(s):
NI-845x: An input parameter, or combination of parameters, is invalid. An example of this error may be setting an invalid baud rate or enabling I2C ACK polling while using 10-bit addressing.
The code can be found in attachements. I couldn't find any extended description of this problem. What could be a problem: incorrect device address, register address, configuration parameters?
Any help is appreciated!
Best regards,
Michael
Attachments:
General I2C Read.vi ‏24 KB

Hi MicMac89!
First of all could you please post which version of LabView are you using?
Could you please tell me which version of 845X hw are you using? (8451 or 8452)
I opened the example you attached. As you wrote the error occurs at the second argument of the property node. (I guess this is the first property node where the error occurs.)
This argument of the property node enables the onboard pull-up resistors. But not all NI-845x hardware support pull-up resistors. (Because of this is important to know which hw version are you using.)
Did you try the example with disabling the pull-up resistors?
I suggest you to go through the Manual of this product, (if you did this not yet) This could make it clear where and when to use what kind of pull-up resistors.
For example: If you are using 8452, you must enable pull-up resistors, for Vref ≤ 1.8 V for the FPGA to properly detect a low-to-high transition
Manual: http://www.ni.com/pdf/manuals/371746d.pdf
HW specification: http://www.ni.com/pdf/manuals/290598a.pdf
Please post if my suggestions helped. Of course if you have any questions, don't hesitate to post them.
Best regards,
Balazs Nagy

Adobe reader 11 installation fails. error message: there was an error installing adobe reader. adobe

Adobe reader 11 installation fails. error message: there was an error installing adobe reader. adobe reader installation error. null. tried using adobe cleaning tool. using XP sp3. seems that adobe 11 is not completely uninstalling. this is because when adobe reader 11 is removed from add/remove program. when pc is rebooted, adobe reader 11 entry comes back but it is like false entry as no size given. please help to succesfully install Adobe Reader 11. also tried:
1. uninstalled, rebooted, reinstalled 2. installed from different locations 3. removed adobe key from
local machine and tried to install

Seriously, I do not understand what is going on - I have never seen this before!
The MSI installers are usually used in corporate environments to roll out installs on multiple machines. However, you can use it like a normal (EXE) installer; it will just go through fewer steps than the EXE. Not sure if it will improve the situation, but it's worth a try.
Another thing to try is to uninstall these remaining entries using Microsoft Fixit: http://support.microsoft.com/mats/Program_Install_and_Uninstall - also no guarantee, but also worth trying.

Help! I have recently updated LR5 and before doing so I was able to email files to clients! (Very Convenient) Now my problem is I have not been able to get pass this error message reading "failed to send" which gives no further detail about what to do to

Help! I have recently updated LR5 and before doing so I was able to email files to clients! (Very Convenient) Now my problem is I have not been able to get pass this error message reading "failed to send" which gives no further detail about what to do to rectify the situation. Someone please guide me through this! Thanks in advance!

Did this ever get resolved, as I am having the same issue. Trying to learn LR5 AFTER a decade using Aperture. I was able to set up a validated account but when I try to send an e-mail or photo I get the simple " Failed to Send " message. Using latest version of Mac OS X.

Failed to read description. error code 2

failed to read description. error code 2

You might check the event log for further details. if the service key folder under
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services is gone then I suspect the error message is about a different service.
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

DVD Burn fails (Error code 0x80020022), newish drive, just applied updates

Hello,
when i try to burn a data dvd with a variety of files from finder on my power mac g5 it thinks a while and then fails with the message:
Burning the disc failed because communication to the disc drive failed (Error code 0x80020022)
I just downloaded the latest OS updates last night.
Disc utility showed permissions problems in some files on my boot drive including in a darwin folder but they repaired fine.
Two weeks ago apple replaced my superdrive and i hadn't tried burning a dvd since then, but cds did and do burn fine.
This computer is under warrantee but in case the latest software updates caused this, or if someone has an easy fix that would allow me to save the trip to the store for analysis and potential couple day wait...
i'm all ears!
Thanks, Will
Software overview
System Version: Mac OS X Server 10.4.8 (8L127)
Kernel Version: Darwin 8.8.0
SONY DVD RW DW-U21A:
Firmware Revision: AADB
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No
hardware
Machine Name: Power Mac G5
Machine Model: PowerMac7,3
CPU Type: PowerPC G5 (2.2)
Number Of CPUs: 2
CPU Speed: 2 GHz
L2 Cache (per CPU): 512 KB
Memory: 2 GB
Bus Speed: 1 GHz
Boot ROM Version: 5.1.8f7
Machine Name: Power Mac G5
Machine Model: PowerMac7,3
CPU Type: PowerPC G5 (2.2)
Number Of CPUs: 2
CPU Speed: 2 GHz
L2 Cache (per CPU): 512 KB
Memory: 2 GB
Bus Speed: 1 GHz
Boot ROM Version: 5.1.8f7
Power Mac G5 Mac OS X (10.4.8)

Thank you for your help!
At one point in the last few days i did run out of disk space on one drive, but i think i had 5Gig free on the short drive when i was trying it earlier, and i have upped that to 30.
My spindled HP DV-16Xs worked on the drive i had before pretty darn well.. I've tried a bunch of unlabeled ones, i've also tried burning at 1x, and i went out and bought some jewel cased verbatim dvd-r 16Xs, same problem.
I will take one more shot at finding the best media using that website, get some 8Xs if i can find them, before hauling it into apple.
without the dvd burner it's hard to backup very well, I was planning to get a external hard drive next month.

Windows 7 64bit has an MTP USB Device Failed error message when I attach my Ipad1

I keep getting an MTP USB Device Failed error message when I plug in my USB cable into my Ipad1. Can someone help?

This is NOT resolved. The "Upper..."Key in the registry editor doesn't exist as you can see below in the image I am providing. This is still an OUTSTANDING issue, can someone please help with resolving this issue, super frustrating.
This is not just an iPAD issue, I get the same problem with my iPhone as well, both (iPhone and iPad) have the latest iOS 6.1.3 installed as well.

My HP LaserJet CP1025nw won't print, "Filter failed" error

Whenever I print something, it acts like it's about to then a system notification just says "printing stopped." There is a "Filter failed" error at http://localhost:631/printers/HP-LaserJet-CP1025nw. I have hplip installed, and have reinstalled it a few times. Two things I've tried from searching the web. I cleared the pacman cache and still the same issue. I tried installing foo2zjs from the AUR, but it would not compile (did not pass the validity check). It prints fine on Linux Mint. I'm out of ideas and don't know where else to go. Any suggestions?

That page's troubleshooting for the "Filter failed" message worked out. I consulted the Wiki before but never found that exact page. I guess I didn't use the best search criteria. Thanks for pointing it out.

Camera Raw 6.7 Update for Mac OS 10.10: Installation Failed error message.

Camera Raw 6.7 Update for Mac: Installation Failed error message. Update downloaded directly from Adobe website. Newly purchased Mac Workbook Pro, OS 10.10, using Photoshop CS5. Other updates successfully accomplished. Camera Raw 6.7 Update was downloaded multiple times with multiple installation attempts. Any recommendations?

thanks for the prompt response...i appreciate it. according to the link you listed, that's correct. the strange thing is that prior to the upgrad to mac os 10.8.4, photoshop CS5 was working just fine and i was able to open my canon raw files with my current camera raw plug-in version 6.7 which adobe has indicated is the last camera raw update they'll be offering for cs 5
so it's clearly an issue related to the "upgrade" of the os. seems like every solution creates 6 new problems...further evidence for the notion that if it ain't broke don't fix it! thanks again.

Error message when trying to sign in to HP ePrint "ajax submit failed: error = 403, forbidden"

HP Photosmart 7525
Windows 7
Ajax submit failed: error = 403, Forbidden
Installed new printer: Photosmart 7525
I am trying to set up my ePrint account and add my printer and it won't let me sign in or create a new account.
Thanks for your help!
Deb
This question was solved.
View Solution.

One can also restart the computer.After it shuts down leave it off for at least a minute and then reattempt access the site once computer is back on and running. I would also check to make sure that Java is up to date and that Adobe Flash is up to date.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

"Connection to server failed" error with Gmail exchange server

Hi,
I upgraded my iPhone 4 to iOS 4.3 on Friday and now I can't access my Gmail account using the Microsoft Exchange settings, I just get a "Connection to server failed" error.
I also have a Google Apps email account for my website and I am able to access it using exchange... it's just my regular Gmail account that I can't access (and that's where all my contacts are stored).
I can access the account using the regular Gmail email settings but that doesn't sync my contacts over the air, which is the advantage of using Exchange that I love the most.
I don't know if it is related or not, but I had a really hard time upgrading to iOS 4.3. I guess the update file was corrupt and it put my phone into restore mode. I had to use a different computer for the upgrade to finally work. Because I was using a different computer I had to restore it as a new phone rather than restoring from a backup, so maybe that has something to do with my email problem.
Message was edited by: KJones75

I seem to have solved the problem. I deleted my Gmail account from the phone and then changed my Gmail password from my computer, and then tried adding the account to my phone again... and surprise, surprise, it worked.
I'm not sure why changing the password fixed the problem, but I'm glad it's working again.

Assembly failed error message

Hello Experts,
We are getting "Assemble failed" error message when we tried to assemble components. I have attached a CMS log file. You help and feedback is greatly appreciated.
David
Info:Starting Step Repository-export at 2008-10-08 05:34:02.0206 -4:00
Info:Component:alleghenyenergy/AE_IMPORTED_OBJECTS
Info:Version :JD1_XD1IR01_C.20081008093400
Info:1. PR is of type TCSSoftwareComponent
Info:the workspace will be read from XI
Info:OK   : workspacedata added.
Info:Component:ivara.com/IVARA_EXP_ENTERPRISE
Info:Version :JD1_XD1IR01_C.20081008093401
Info:2. PR is of type TCSSoftwareComponent
Info:the workspace will be read from XI
Fatal Exception:com.sap.cms.tcs.interfaces.exceptions.TCSCommunicationException: communication error: Exception received:
ClientServerException exception:Software component version 58a66500336b11dd8387f3c70a53b4e5 has not yet been imported into the system and therefore cannot yet be assembled using CMS. You must execute a CMS- or file-based import of the software component version into the consolidation system first.
com.sap.aii.utilxi.misc.api.ResourceException: Software component version 58a66500336b11dd8387f3c70a53b4e5 has not yet been imported into the system and therefore cannot yet be assembled using CMS. You must execute a CMS- or file-based import of the software component version into the consolidation system first.
     at com.sap.aii.ibrep.server.transport.impl.service.InternalRepTransportServiceImpl.checkSwcvExistence(InternalRepTransportServiceImpl.java:316)
     at com.sap.aii.ibrep.server.transport.impl.service.InternalRepTransportServiceImpl.createSupportPackage(InternalRepTransportServiceImpl.java:283)
     at com.sap.aii.ib.server.transport.impl.service.TransportServiceImpl.createSupportPackage(TransportServiceImpl.java:362)
     at com.sap.aii.ib.server.transport.impl.hmi.CmsHmiMethods.process(CmsHmiMethods.java:206)
     at com.sap.aii.utilxi.hmis.server.HmisServiceImpl.invokeMethod(HmisServiceImpl.java:169)
     at com.sap.aii.utilxi.hmis.server.HmisServer.process(HmisServer.java:178)
     at com.sap.aii.utilxi.hmis.sbeans.HmisBeanImpl.process(HmisBeanImpl.java:86)
     at com.sap.aii.utilxi.hmis.sbeans.HmisLocalLocalObjectImpl10.process(HmisLocalLocalObjectImpl10.java:144)
     at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:290)
     at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:211)
     at com.sap.aii.utilxi.hmis.web.workers.HmisInternalClient.doWork(HmisInternalClient.java:70)
     at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doWork(HmisServletImpl.java:496)
     at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doPost(HmisServletImpl.java:634)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
:communication error: Exception received:
ClientServerException exception:Software component version 58a66500336b11dd8387f3c70a53b4e5 has not yet been imported into the system and therefore cannot yet be assembled using CMS. You must execute a CMS- or file-based import of the software component version into the consolidation system first.
com.sap.aii.utilxi.misc.api.ResourceException: Software component version 58a66500336b11dd8387f3c70a53b4e5 has not yet been imported into the system and therefore cannot yet be assembled using CMS. You must execute a CMS- or file-based import of the software component version into the consolidation system first.
     at com.sap.aii.ibrep.server.transport.impl.service.InternalRepTransportServiceImpl.checkSwcvExistence(InternalRepTransportServiceImpl.java:316)
     at com.sap.aii.ibrep.server.transport.impl.service.InternalRepTransportServiceImpl.createSupportPackage(InternalRepTransportServiceImpl.java:283)
     at com.sap.aii.ib.server.transport.impl.service.TransportServiceImpl.createSupportPackage(TransportServiceImpl.java:362)
     at com.sap.aii.ib.server.transport.impl.hmi.CmsHmiMethods.process(CmsHmiMethods.java:206)
     at com.sap.aii.utilxi.hmis.server.HmisServiceImpl.invokeMethod(HmisServiceImpl.java:169)
     at com.sap.aii.utilxi.hmis.server.HmisServer.process(HmisServer.java:178)
     at com.sap.aii.utilxi.hmis.sbeans.HmisBeanImpl.process(HmisBeanImpl.java:86)
     at com.sap.aii.utilxi.hmis.sbeans.HmisLocalLocalObjectImpl10.process(HmisLocalLocalObjectImpl10.java:144)
     at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:290)
     at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:211)
     at com.sap.aii.utilxi.hmis.web.workers.HmisInternalClient.doWork(HmisInternalClient.java:70)
     at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doWork(HmisServletImpl.java:496)
     at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doPost(HmisServletImpl.java:634)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
com.sap.cms.tcs.interfaces.exceptions.TCSCommunicationException: communication error: Exception received:
ClientServerException exception:Software component version 58a66500336b11dd8387f3c70a53b4e5 has not yet been imported into the system and therefore cannot yet be assembled using CMS. You must execute a CMS- or file-based import of the software component version into the consolidation system first.
com.sap.aii.utilxi.misc.api.ResourceException: Software component version 58a66500336b11dd8387f3c70a53b4e5 has not yet been imported into the system and therefore cannot yet be assembled using CMS. You must execute a CMS- or file-based import of the software component version into the consolidation system first.
     at com.sap.aii.ibrep.server.transport.impl.service.InternalRepTransportServiceImpl.checkSwcvExistence(InternalRepTransportServiceImpl.java:316)
     at com.sap.aii.ibrep.server.transport.impl.service.InternalRepTransportServiceImpl.createSupportPackage(InternalRepTransportServiceImpl.java:283)
     at com.sap.aii.ib.server.transport.impl.service.TransportServiceImpl.createSupportPackage(TransportServiceImpl.java:362)
     at com.sap.aii.ib.server.transport.impl.hmi.CmsHmiMethods.process(CmsHmiMethods.java:206)
     at com.sap.aii.utilxi.hmis.server.HmisServiceImpl.invokeMethod(HmisServiceImpl.java:169)
     at com.sap.aii.utilxi.hmis.server.HmisServer.process(HmisServer.java:178)
     at com.sap.aii.utilxi.hmis.sbeans.HmisBeanImpl.process(HmisBeanImpl.java:86)
     at com.sap.aii.utilxi.hmis.sbeans.HmisLocalLocalObjectImpl10.process(HmisLocalLocalObjectImpl10.java:144)
     at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:290)
     at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:211)
     at com.sap.aii.utilxi.hmis.web.workers.HmisInternalClient.doWork(HmisInternalClient.java:70)
     at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doWork(HmisServletImpl.java:496)
     at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doPost(HmisServletImpl.java:634)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
     at com.sap.cms.tcs.client.XICommunicator.readWorkspaceData(XICommunicator.java:228)
     at com.sap.cms.tcs.core.RepositoryExportTask.processRepositoryExport(RepositoryExportTask.java:226)
     at com.sap.cms.tcs.core.RepositoryExportTask.process(RepositoryExportTask.java:324)
     at com.sap.cms.tcs.process.ProcessStep.processStep(ProcessStep.java:77)
     at com.sap.cms.tcs.process.ProcessStarter.process(ProcessStarter.java:197)
     at com.sap.cms.tcs.core.TCSManager.assemblePropagationRequests(TCSManager.java:677)
     at com.sap.cms.pcs.assembly.manager.AssemblyManager.assemble(AssemblyManager.java:1510)
     at com.sap.cms.pcs.assembly.AssemblyQueueHandler.execAssembly(AssemblyQueueHandler.java:818)
     at com.sap.cms.pcs.assembly.AssemblyQueueHandler.startAssembly(AssemblyQueueHandler.java:133)
     at com.sap.cms.pcs.transport.proxy.CmsTransportProxyBean.startAssembly(CmsTransportProxyBean.java:829)
     at com.sap.cms.pcs.transport.proxy.LocalCmsTransportProxyLocalObjectImpl20.startAssembly(LocalCmsTransportProxyLocalObjectImpl20.java:1836)
     at com.sap.cms.ui.wl.Custom1.startComponetAssembly(Custom1.java:14080)
     at com.sap.cms.ui.wl.Custom1.assembleQueue(Custom1.java:4685)
     at com.sap.cms.ui.wl.wdp.InternalCustom1.assembleQueue(InternalCustom1.java:2303)
     at com.sap.cms.ui.wl.Worklist.handleAssemblyOptionsEvent(Worklist.java:1487)
     at com.sap.cms.ui.wl.wdp.InternalWorklist.wdInvokeEventHandler(InternalWorklist.java:2520)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
     at com.sap.tc.webdynpro.progmodel.controller.Component.fireEvent(Component.java:283)
     at com.sap.cms.ui.wl.wdp.InternalWorklists.wdFireEventAssemblyOptionsEvent(InternalWorklists.java:388)
     at com.sap.cms.ui.wl.Worklists.fireAssemblyOptionsEvent(Worklists.java:247)
     at com.sap.cms.ui.wl.wdp.InternalWorklists.fireAssemblyOptionsEvent(InternalWorklists.java:328)
     at com.sap.cms.ui.wl.AssemblyOptions.onActionStartAssembly(AssemblyOptions.java:276)
     at com.sap.cms.ui.wl.wdp.InternalAssemblyOptions.wdInvokeEventHandler(InternalAssemblyOptions.java:339)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
     at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Info:Step Repository-export ended with result 'fatal error' ,stopping execution at 2008-10-08 05:36:32.0376 -4:00

Hi,
Fatal Exception:com.sap.cms.tcs.interfaces.exceptions.TCSCommunicationException: communication error: Exception received:
ClientServerException exception:Software component version 58a66500336b11dd8387f3c70a53b4e5 has not yet been imported into the system and therefore cannot yet be assembled using CMS. You must execute a CMS- or file-based import of the software component version into the consolidation system first.
The error is saying that there might a communication issue with CBS to CMS. That's the reson the imported SCA version is not available in the current system to assemble. The NWDI restart may work some times.
Thanks
Krishna

Downloads from itunes fail - error code 8003 - what does that mean, or more importantly, how do I get what I paid for?

Downloads from itunes fail - error code 8003 - what does that mean, or more importantly, how do I get what I paid for?

Try the troubleshooting for that error code on this page : iTunes: Advanced iTunes Store troubleshooting - Apple Support (search for '8003' on the page, it's just below half-way down)

DiB0070 I2C read failed errors on Sony playTV dual tuner.

Similar Messages

Maybe you are looking for