Diff between valuated stock and storage loc stock

Dear guys,
What is difference between valuated stock and starage loc/ batch stock?
Regards
Jay

Hi,
the stock which shown at MMBE at storage location level /batch is valuated stock.In order to identify the differrance , the stock which is taken in will be with stock types likes unrestricted,quality etc.If batch management is active for the material , material willbe procured in batches and will be kept in storage location, with differrant stock types.Stock types may also be like sale order stock etc.If the material is procured against a account assignment , the value of the stock will be costed against theaccount assignment.
The qty multiplied with the price is the value of the material and this valuated stock will be stored in the storage location under a batch if batch management is active.
Again valuation can be at company code level or plant level.
Also non valuated and non stock materials also in existsance which will be depend upon the material type and will be procured against a account assignment.
Regards,

Similar Messages

Sales order stock and storage location stock on past date with value

Hi everyone.
I m looking for a report which can give sales order stock with value as it is shown in mb5b and storage location stock with value as in mc.5 is there any report which can give the combination of both the things on past date with values.

can you tell me what shall be the fields and table for special stock on past date with value and sloc stock on past date with value

Stock report in BW (valuated stock and Storage Location level)

Dear All,
            Regards.We got an situation here,
Case 1: R3 (MB5B) (Both "Storage loc" and "Valuated stock" shows the same Stock Qty)
1).The BW Stock Report shows values the Correct Values for "Receipt Qty" and "Issue Qty" with the Correct "Quantity total Stock" aswell.
Case 2 :   R3 (MB5B) (Stock is different between "Storage Loc" and "Valuated Stock")
1).The BW Stock Report shows the "Quantity Total Stock according to VALUATED STOCK Level(MB5B),but the "Receipt Qty" and "Issue Qty" according to STORAGE LOCATION Level(MB5B) .
We followed the "How to Handle Inventory "Doc with the proper sequence of Loading of Infosources and Compression.The data is sitting fine at the cube level.
It would be great if someone can throw some Light on this issue,on how the Query shows a COMBO of both Valuated stock and Storage Location stock....Held up with this issue for quite sometime..Had a look at the   Oss Note (589024)...........
Manythanks
Arun

HI,
In Inventory we have two quantity fields given to satisfy the requirement.
Valuated stock Qty - 0VALSTCKQTY
Storage Location qty - 0TOTALSTCK
You can make use of them based on your requirement. Hope this helps for you.
Thanks,
Arun

Regarding how enable plant stock and storage location view

hi all:
   Could you please tell me how enable plant stock and storage location view for MM01?
   couldn't be better if there are detailed steps .
   Thank you very much!

Hi,
The views depend to material type. So you need update in the material type attributes.
SPRO - Logistic General - Material Master - Basic Settings - Material Types - Define Attributes of Material Types
Double click on the material type and update the views in 'User Departments'.
Thanks.

Diff between ECC5.0 and ECC6.0

Hi,
This is Ramakrishna,can any one give proper explanation diff between ECC5.0 and ECC6.0
Regards
Ramakrishna

Hi,
Refer following link;
[SAP ERP Solution Browser|http://solutionbrowser.erp.sap.fmpmedia.com/]
Following are the basic differences as far as MM Module is concerned;
Pickup list - Batch where-used list display in transaction MB56
u2022 Until release 4.7, the top-down and bottom-up analyses in the function pickup list for batch where-used list (transaction MB5C) were displayed only in the form of simple output lists. As of release 6.00 of SAP ERP Central Component, the function pickup list for batch where-used list branches to the batch where-used list itself (transaction MB56).
u2022 In addition, user can define how the data in the batch where-used list is displayed, in the initial screen.
u2022 User can use all the settings available in the batch where-used list. For example, he can expand transfer posting or display vendor batch. However, it is not possible to limit the selection to valid plants in the initial screen of the pickup list.
Usability enhancements for transaction MIGO for the posting of goods movements
u2022 For goods movements that refer to purchase orders as reference documents (for example, goods receipt, goods issue, subsequent adjustment), user can specify the ordering plant as an additional selection criterion directly next to the purchase order number and the item number.
u2022 There is a new default value: "copy account assignment fields." When entering other goods receipts, user can copy existing account assignment data from the previous item to use as the default values for a new item. To do this, user has to set the copy account assignment fields indicator in the default values.
u2022 User changes the default values in the menu path "Settings -> Default Values."
u2022 Goods movement is monitored with reference to a material document. When you enter the following goods movements, it is possible to specify a material document, such as the following, as the reference document:
- Goods receipt
- Goods issue
- Transfer posting
- Remove from storage
u2022 Note that these material documents must be documents that have arisen from a goods movement without reference ("Others") and that are not reversal documents.
New report : display list of invoice documents (MIR5)
u2022 Logistics invoice verification offers a new report display list of invoice documents (RMMR1MDI), w hich user can use to display such a list (Transaction is MIR5).
u2022 As an addition to the existing program invoice overview (transaction code MIR6), user have extended selection criteria and display options. For example, on the initial screen user can make selections by one-time customers, invoice gross amount, and entry date.
u2022 User can also show an expert mode, which enables him to select at plant level by FI document, GL A/c posting, and Material Posting.
u2022 In the output list, the report shows both posted and held invoices.
u2022 It does not show invoices without a corresponding FI document; such as invoices planned for verification in the background or which the software has already verified as containing errors.
Requirement prioritizations in materials management
u2022 With Requirement Prioritization functionality user can assign requirement urgency at item level in purchasing and reservation documents.
u2022 The software determines the relevant requirement priority (overall priority) of a material requisition from the combination of requirement urgency group and organizational priority.
Mass maintenance of outline agreements
The following two transactions available:
u2022 Mass maintenance for contracts: transaction code MEMASSCONTRACT
u2022 Mass maintenance for scheduling agreements: transaction code MEMASSSA
Commitment plan for purchase contracts
u2022 With the function of the commitment plan for purchase contracts, it is possible to pre plan value consumption for a purchase contract.
u2022 To this end, a commitment plan is generated for each document item of the relevant contract.
u2022 This commitment plan itself can have any number of items.
u2022 User can define a value and a validity date for each commitment plan item.
u2022 This enables user to pre plan different values for different periods of time.
u2022 The software generates an earmarked fund document for a defined commitment plan item.
u2022 This earmarked funds document can in turn contain several different items with different account assignments.
u2022 The software adopts these account assignments from the item account assignments of the commitment plan.
u2022 If a purchase requisition or purchase order references this contract, the earmarked funds document is copied into the purchase order, and the account assignment is adopted from that document.
u2022 Account assignment to a different account assignment object is then no longer allowed.
Availability check in "Enjoy purchase order and requisition"
u2022 Display and checking of availability are invokable separately in the "Enjoy purchase order and requisition" function, in line with the software behavior on the sales side.
u2022 User invoke the display and checking of availability in the "Enjoy purchase order" function (transaction code ME21N) and the "Enjoy purchase requisition" function (transaction code ME51N) as follows:
- To display the availability overview, choose the menu path "Environment -> Availability." - To check availability, choose the "Check Availability" icon.
- Until this release, if user carried out the availability check for an item of a stock transport order, the software adopted confirmations as per the desired date/time only.
u2022 Two settings are possible with availability check:
- Confirmation as per desired date/time (this is the standard setting and corresponds to previous software behavior)
- Delivery proposal - Full confirmation
External services: putting service items in the purchase order on hold (changed)
User can put purchase orders with service items on hold if these items do not contain any errors. Purchase orders with service items can also be put on hold if errors occur only at header level or as a result of the availability check.
Customizing transactions OX18 replaced by view
The assigned customizing transactions have been replaced by the following view in the following implementation guide activity in customizing for the enterprise structure: Assign plant to company code: transaction OX18 replaced by view V_T001K_Assign. One will find this activity in the implementation guide under the menu path "Enterprise Structure -> Assignment -> Logistics General -> Assign Plant to Company Code."
Goods receipt: new movement types in inventory management
The following new movement types are available in inventory management:
- 107: Goods receipt to valuated goods receipt blocked stock
- 109: Goods receipt from valuated goods receipt blocked stock
Prepayment of invoices
This functionality is characterized as follows:
u2022 User can trigger prepayment of vendor invoices in logistics invoice verification.
u2022 User use the prepayment function for vendors with whom organisation has a good, long-standing relationship.
u2022 The function enables payment soon after issue of the invoice and full exploitation of the date of required payment and existing cash discounts, by posting the vendor liabilities, taxes, and cash discounts in financial accounting in advance.
u2022 The software executes the payment of the invoice regardless of the relevant goods receipt and the outcome of the invoice verification check.
u2022 Most logistics invoice verification standard functions are not affected by the prepayment function.
u2022 When the software posts invoices, it continues to execute the standard checks.
u2022 If the software has already posted the prepayment document, user can make only restricted changes to the header fields of the invoice.
u2022 To ensure adequate and orderly financial accounting postings, a prepayment clearing account has been added to SAP ERP Central Component.
u2022 Upon prepayment, the software debits this account and then settles the account again after executing the check.
Purchasing accounting information to the former SAP Business Information Warehouse
u2022 With the transfer of the purchasing account information to the former SAP Business Information Warehouse component (whose functionality is now part of SAP Net Weaver), it is now possible to maintain Info Cubes, reports, and queries that can determine how and where the costs from purchasing documents have been assigned and controlled.
u2022 As part of the software, a new data source (2LIS_02_ACC) has been created and the purchasing extraction process extended to cover the account information for purchasing orders, schedule agreements, and contracts.
Automatic settlement of planned delivery costs with evaluated receipt settlement (MRDC)
u2022 A new report (RMMR1MDC), available within the logistics invoice verification, can be used to automatically settle planned delivery costs.
u2022 To invoke the report, from the SAP easy access screen, choose the menu path "Logistics -> Materials Management -> Logistics Invoice Verification -> Automatic Settlement -> Automatic Delivery Cost Settlement" (transaction code MRDC).
u2022 Functionality for report RMMR1MRS is enhanced.
u2022 User can use the report RMMR1MRS, "Evaluated receipt settlement with logistics invoice verification (LIV)" (transaction code MRRL), to settle planned delivery costs in addition to goods and service items within logistics invoice verification.
u2022 To do so, set the relevant indicator on the initial screen of the report.
Parking service items
It is now possible to put service orders without errors or with commitment errors on hold.
Report MB5B : Stock on Posting Date
u2022 This Report is available with u201CNon-Hierarchyu201D display option which provides details of Opening, Receipt, Issue and Closing balances of Stock with quantity and value both for a given period.
u2022 This functionality is not available in Release 4.7.
Stock Transfer Between Storage Locations
u2022 Function of stock transport orders between storage locations is available from ECC 6.0 onwards.
u2022 As a result of which user can input issuing storage location with supplying plant.
u2022 Facility of using different delivery types for different issuing storage locations is available.
u2022 Shipping Point data can also be determined based on the issuing storage location

Blocked stock and GR Block stock

Can anyone please let me know the difference between Blocked stock and GR blocked stock. How to post stock to these both stock type and how valuation matters to those.
Also for transfer posting from Stock type Blocked Stock to Quality Inspection Stock or Unrestricted-use Stock, whether accounting document will generate or not....
Please clarify me on this.
Thank you
Shreek

Can anyone please let me know the difference between Blocked stock and GR blocked stock. How to post stock to these both stock type and how valuation matters to those.
GR Blocked stocks means if you have doubt about the stock you can post these stocks to GR Blocked stock with mvt type 103.In this case no accounting documents generated.Once you gets clarified the doubt about stock you can move the stock to your stock with mvt 105.Once you post the document with 105 you can get accounting documents will be generated.
Also for transfer posting from Stock type Blocked Stock to Quality Inspection Stock or Unrestricted-use Stock, whether accounting document will generate or not...
Blocked stock is you are blocked these stocks for other movements This stock you can transfer mvt 343 & 344 blocked to unrestricted or unrestricted to block.In this cas you are moving the stocks with in storage location in single plant so thesre is no accounting generated.only stock status changed..
Hope this will clarifies,
JS

Safety stock and min safety stock

Dear all,
CAn anybody explain me the functional difference between safety stock and min safety stock?
And what is the meanng of safety time?
Karthick

Hi,
Safety Stock:
The quantity of stock to satisfy high requirements. The purpose of the safety stock is to prevent material shortage.
Safety stock as the name suggest is the stock level till which the dead stock or stock out situation will not arise (probable figure based on past data maintained in master).
As such this figure is not stock, it is cut-off figure maintained in master which is used for Planning and once the stock level dips below this value, you can configure system to generate PR, orders automatically. It has its relevance in MRP and CBP.
Safety stock is not used in production.
Minimum Safety Stock
    The quantity that defines the lower limit for safety stock. This value cannot be exceeded.
    The safety is checked to see if it is greater or equal to this lower limit.
    The lower limit is checked if you use an availability indicator which shows, according to customizing settings, if the safety stock is to be calculated again in a forecast. If the safety stock is lower than this level in forecasting, the safety stock is automatically increased to the value of the lower level.
The safety stock must always be greater or equal to this lower level (minimum safety stock)
Hope this will help help you.
Regards,
Pavan

Request for help on Vendor Consignment stock and Customer Consignment Stock

HI Experts,
We have a requirement to segregate the Customer Consignment stock and Vendor consignment stock from the total Consignment stock available in the BW report.
Currently in the report the calculation of total consignment stock is based up on Issued consignment stock and Received consignment stock .
The calculations of the Issued and Received consignments stocks are specified below.
Issued consignment Stock
The below following parameters are checked when the quantity is considered as Issued consignment Stock
Transaction or Process keys : 100, 101, 104, 105, 106, 110
Application    :   MM
Stock relevance : 1
Adding to the above conditions,
u2022     When the stock category is u2018Ku2019, the Quantity in Base Unit of Measure is assigned to Issued Consignment Stock. or
u2022     When the stock category is blank and the stock type is u2018Eu2019 or u2018Ku2019 or u2018Lu2019 then also the Quantity in Base Unit of Measure is assigned to Issued Consignment Stock.
Received Consignment Stock :
The below following parameters are checked when the quantity is considered as Issued consignment Stock
Transaction or Process keys : 000, 001, 004, 005, 006, 010
Application    :   MM
Stock relevance : 1
Adding to the above conditions,
u2022     When the stock category is u2018Ku2019, the Quantity in Base Unit of Measure is assigned to Received Consignment Stock. or
u2022     When the stock category is blank and the stock type is u2018Eu2019 or u2018Ku2019 or u2018Lu2019 then also the Quantity in Base Unit of Measure is assigned to Received Consignment Stock
Only stock category and stock type are available in the BW report for determining the type of consignment stock . So, with respect to stock category and stock type, could you please kindly advise if it is possible to determine the Customer consignment stock and Vendor consignment stock in the report
Thanks a lot
Warm Regards,
Jeswanth
Edited by: jeswanth kadali on Jun 23, 2009 4:10 PM

Hi,
We can settle consignment goods to vendor through MRKO transaction.Even user transafers consignment stock to own stock through MB1B transaction.We can use same document to settle vendor through MRKO transaction.
What is implications of such Action (like Goods issue, 1 step transfer) on SAP.
Nothing will happpen after after stock converted to own stock.
Regards,
JS

In LSMW, what is diff between LSMW-BAPI and LSMW-IDOC

hello all
In LSMW, what is diff between LSMW-BAPI and LSMW-IDOC

Hi Swamy,
The differences between IDoc and BAPI are as follows:
IDOC
IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system.
Idocs are processed asynchronously and no information whatsoever is returned to the client.
The target system need not be always online. The IDOC would be created and would send the IDOC once the target system is available (tRFC concept). Hence supports guaranteed delivery.
With asynchronous links the sub-process on the client can be finished even if the communication line or the server is not available. In this case the message is stored in the database and the communication can be done later.
The disadvantage of asynchronous links is that the sub-process on the server cannot return information to the calling sub-process on the client. A special way for sending information back to the client is required. In addition, a special error handling mechanism is required to handle errors on the receiving side.
IDOCs may be more changeable from release to release.
IDOCs are poorly documented.
BAPI
BAPIs are a subset of the RFC-enabled function modules, especially designed as Application Programming Interface (API) to the SAP business object, or in other words: are function modules officially released by SAP to be called from external programs.
BAPIs are called synchronously and (usually) return information.
For BAPIs the client code needs to do the appropriate error handling.
Problems with synchronous links occur if the communication line or the server is temporarily not available. If this happens, the sub-process on the client cannot be finished (otherwise there would be data inconsistencies).
Synchronous links have the advantage that the sub-process on the server can return values to the sub-process on the client that has started the link.
BAPIs are not totally immune to upgrades.
BAPIs are reasonably well documented.
Reward points if useful.
Best Regards,
Sekhar

Diff between Thin client and Rich client

Hi Everyone,
Can someone give me a clear picture of the what is the diff between Thin client and Rich client.
Thanks,
Krishna

Hi,
thick client (rich client) has/stores all the data inside itself
so it can do application processing without the server with data
thin client uses resources from host computer (from server)
and wihtout that you are not able to work with that kind of client
does that answer your question ?
Regards,
michal

Diff between Seeburger Adapter and File Adapter

Hi All,
My company needs to interact with some banks and the banks are particular that they want SFTP, which is not supported by File Adapter, so we have decided to go with Seeburger adapter.
Now what are the differences between File adapter and seeburger adapter?
I believe that Seeburger adapter does not support File Content Conversion, Archiving etc.
Could you all pls put some light on the diff between file adapter and seeburger adapter when it comes to dealing with files?
Xier

Hi
You are aware with working of File Adapter.
The most direct way of using the Seeburger adaptors is to configure the BIC as a module. There is a software component from seeburger called bicmapper which will allow you to
1. Define or import the inbound message metadefinition in various formats ( edifact, xml,...)
2. Using a mapping create an xml variant as the output metadefinition or edifact in the other direction.
3. Create a one to one mapping between input en output.
4. Export the metadata in xsd or sda format for import in XI
5. Generate an SDA which can be deployed in XI and used as a module.
Have a look here,
http://www.seeburger.com/fileadmin/com/pdf/SAP_Exchange_Infrastructure_Integratio_Strategy.pdf
Some Seeburger related information
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e2aeb02c-0601-0010-d680-c9be61ffa390
Go through this threads:
http://www.seeburger.com/fileadmin/com/pdf/SAP_Exchange_Infrastructure_Integratio_Strategy.pdf
Need Material on Seeburger Adapters.
Seeburger Adapter
Installing seeburger adapter
http://www.seeburger.com/xi-adapters/
Thanks

Diff. between Tax Code and Condition Types

Hi,
What is the diff. between Tax Code and Condition Type???
Why we maintain Tax Codes under Invoice Tab in PO, when Condition Types are available for Calculation Procedure...???
Please guide..

hi..
Tax code : Tax code in some what more specific for calculating the tax...some material is having 2% tax..some having 3 % tax..etc..and these are input tax...so..these tax code will be of type input tax..
now..based on the nature of tax type amount will be calculated....
suppose tax code is calculation of 2 condtion type so ..we can do it in tax code conditon record fv11 also..
so..tax code can be a combination of cond type...
where as through cond type also we can also achieve this..by using one statistical cond type...
Cond Type : cond type is for the daily pricing configuration..how system will calculate the price for a centain material we can make define the rules here...
Try this out..
Thans

Diff between oracle 10g and 11g

Can any one could tell me what is the main diff between oracle 10g and 11g ?
Thanks in Advance
Venkat

Hi,
You can read
http://www.oracle.com/technetwork/articles/sql/index-082320.html
http://www.oracle.com/technetwork/articles/sql/index-099021.html
Anand

Report on Dead stock and Slow moving stock

Hi ,
On of my cleints requirement is to see the list of Dead stock and slow moving stock
I tried T.COde Mc50 and MC46 but I could not understand the report fully
In case of T.code MC50(dead stock) the input criteria for the report is just Plant,Pur org and Sales Org.
How does system identify an item as dead stock.
Is there any setting to define an item as dead stock before running report MC50?
In case of slow moving stock ,i want to see all the material for which no posting
happened for 60 days.In this case what value I need to select in T.Code MC46
Thx in advance
Deva

Hi,
While using MC46 report under Scope of ranking list, select the No. of days up to last consumption as 60 days.
And execute with the other selection parameters.
Regards,
DilliB

Diff between interactive report and interactive alv

Diff between interactive report and interactive alv? Suppose I have been given certain program then how I will diffrentiate that this prog should be done in interactive alv or interactive report.

hi
both are used for same purpose
interactive report means an output list which displays basic details & allow user to interact, so that a new list is populated based on user-selection. With interactive list, the user can actively control data retrieval and display during the session.
I suggest to use ALV.by using ALV we can display in Grid as well as list format.
Output format will be good . Sorting,Filtering facilities are provided by itself.We can have column headings also.
if helpful reward points

Diff between valuated stock and storage loc stock

Similar Messages

Maybe you are looking for