Difference B/W Account Analysis - (180 Char) and Account Analysis report

Hi Experts,
Can anybody expalin me the difference between "Account Analysis - (180 Char)" Report of General Ledger Application and "Account Analysis Report" of SubLedger Accounting Application.Can we compare both the reports in R12? Does both the reports gives us equal Results in R12?
Please explain me the exact difference between these reports.
Thanks in Advance,
RS

981194 wrote:
Hii,
Please help me , what is the alternative report in R12 for Account Analysis – Sub ledger Detail (180 Char)Please see this
its Obsoleted in R12
EBS R12: Financial Reports impacted by the R12 (12.0 and 12.1) Upgrade [ID 1110684.1]
R12: Are Account Analysis Subledger Detail Reports Available In R12? Are there obsoleted reports? [ID 464233.1]
;) AppsmAsti ;)
Sharing is Caring

Similar Messages

Define G/L Account for Product Category and Account Assignment Category

Hello Experts,
I got a requirment to make a new entry in below SPRO path.
Define G/L Account for Product Category and Account Assignment Category
*Individual entries cannot be put into the change request*
*Message no. SV141*
*Diagnosis*
*For technical reasons, the entries cannot be fully specified in the change request. There are two possible reasons for this:*
*1. The key of an entry is longer than 120 characters. All entries whose keys match up to character 119, are then copied into the change request, rather than an individual entry.*
*2. The key of an entry contains fields of special data types, for example, packed numbers. The key can only be specified in the change request up to the first such field from the left.*
*all entries whose keys match up to character 26 are copied into the change request, rather than a single entry.*
*System Response*
*The selected entry is copied into the change request correctly, but other entries may be copied as well.*
My question is, If I make one entry and move to Quality and production system will it move only one entry or whole table will move?
Kindly help me.
Thanking you
Regards
Sharan

I got the same message trying to make an entry in SPRO:
Define Backend System for Product Category
I found the note 305942 describing exactly the issue for my and above mentioned entry, which offers the correction, then the note 326802 which offers the correction of the first notes. However, both notes are for Releases 4.6C and D (from 2000), and we are using EHP2 FOR SAP SRM 7.0.
I see another discussions in SCN regarding this topic, but haven't found real solution yet. Any hints? At least the answer to previous question from Sharan would be appreciated.
Best regards,
Toni

Difference in Cumulative balance amount of ERP and BW query report

Hi all,
We have a report to display the Cumulative balance amount based on G/L account.
The issue we are facing here is, when we check a May month's cumulative balance in ERP side ( using Transaction code FAGLB03 by giving G/L account number, Company code and Year as 2010) we are getting 1000 EUR, and the May month's Balance is 300 EUR.
When we run our Qury report in BW side for the same conditions( same G/L account, Key due date as 31.05.2010 and same Company code) we are getting the Cumulative Balance as only 900 EUR. we are missing some 100 EUR in our report for our Cumulative balance. But,When I check the Cube on which our Query report runs, I could get the May month's balance as 300 EUR.
Kindly help me to rectify this issue.
Thanks.
Regards,
Jayaprakash J

Hi,
Check is there any restrictions are there . the data must be displayes if the data is there in infocube.
Regards
sivaraju

Defining G/L Account for product category and account assignment category

We are using the standard configuration to default in a G/L account for a given product category and account assignment category combination. This works well for us when it comes to the shopping transactions (i.e. BBPSC01, BBPSC02, etc.), however we have a problem with this logic in the carry out sourcing transction BBPSOCO01. Our users are creating describe requirements which are then delivered to BBPSOCO01, however the user is not assigning the correct product category, so the sourcing department updates the cart with the correct product category. Upon doing so, the G/L account gets changed to whatever the V_BBP_DET_ACCT table determines is correct for that given product category/account assignment combination. We would like to know if their is a way to not fire the "default G/L account determination" when the shopping cart is changed in transaction BBPSOCO01. I already know about the BBP_DETERMINE_ACCT BADI but thought there might be a less expensive alternative. Our business treats the G/L account provided by the configuration as a guideline, therefore when the buyer changes the product category they also want to retain the account assignment information. Any suggesstions on how this might be accomplished outside of creating my own logic in the BADI?
Best regards,
Shawn O'Connor

I got the same message trying to make an entry in SPRO:
Define Backend System for Product Category
I found the note 305942 describing exactly the issue for my and above mentioned entry, which offers the correction, then the note 326802 which offers the correction of the first notes. However, both notes are for Releases 4.6C and D (from 2000), and we are using EHP2 FOR SAP SRM 7.0.
I see another discussions in SCN regarding this topic, but haven't found real solution yet. Any hints? At least the answer to previous question from Sharan would be appreciated.
Best regards,
Toni

Difference in currency rate between customer order and accounting document

Dear gurus,
While I am cretaing customer order SAP calculates currency from Exchange Rate="B" at OB08 screen. This situation results because of Currency type in customer master data. But in the accounting document SAP calculates currency from Exchange Rate="M" at OB08 screen. As a result; this is causes problems.
I want SAP to calculate currency which is entered in customer master data. It might be M,B etc.. According to the CUSTOMER.
How can I fix this issue?
Thnks regards,

Hi,
In the copy routine from Sales Order to Billing, copy the exhcange rate from sales order.
And then the billing will get the same exchange rate as in sales order and thus will also pass the same to the accounting.
Regards,
SDNer

Sent message from Mac Mail work email shows my personal gmail account as Mail to: and account summary shows outgoing mail server as smtp.google while incoming shows imap.google

sent email from work through Mac Mail shows to the sender Mail to: (personal gmail). Account summary shows smtp.google on outgoing server and imap.google on incoming

Is there a way to add this automatically?
For a semi-permanent change, the Sending Server is named as "OutGoing Mail Server SMTP" on the Preference pane for each Mail Account.
To change its specifics, move the mouse cursor over it and choose "Edit SMTP Server List" from the drop-down Menu. Then choose the SMTP Server you wish to inspect/change and its information will be shown. If using similar ones for two different email accounts, change the description field, e.g., change "gmail" to "gmail (work)".

How do I authorize songs purchased from one ITunes account to another Computer and Account?

How do I authorized songs purchased on my old Itunes account on another computer using my new account. Thanks

You have replied to a 3 year old post.
If you have a question, post your own question.
Just change the email address associated with your current account
Change your Apple ID - Apple Support

My account was hacking and account name was change...

My account was hacking tonight and account name was change. I lost all my contacts and conversations and all money. How can I change the name on the account now on my name and how can I have all my contacts back?

Change your Skype password
https://login.skype.com/account/password-reset-request
Please see-
https://support.skype.com/en/faq/FA10920/what-can-i-do-if-someone-has-taken-over-my-account
Regards,
Tamim
Location - Dhaka | Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hour
If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.

Differenciating between Balance Sheet and P&L Reports

Hi,
From a SAP BI perspective, is it a right way to differenciate between Balance Sheet and P&L Reports based on Account Type ( IS- for P&L Reporting and BS- for balance sheet reporting).
Thanks
Rashmi.

If your General Ledger accounts, for the Chart of Accounts in use in your R3/ECC source environment, have the account type populated for each account as BS for Balance Sheet accounts and IS for Income Statement (P&L) accounts, then that should work for separating accounts for Balance Sheet and P&L reporting.
However, if this doesn't always hold true, another way you can do this is by using the XBILK (Indicator: Account is a balance sheet account?) field on SKA1 where X denotes a Balance Sheet account and blank denotes an Income Statement account.
Either way, you should validate with your FI Functional Consultant or FI business person to determine that your thought or the alternative I provided is correct. I say this because there may be reconciliation accounts that will are identified as Income Statement accounts, but the business doesn't want them to be reported (and in most cases they aren't reported - at least in my experiences).

Differences between Costing based COPA and Account based COPA

Hi,
I wanted to know the main differences between Costing based COPA and Account based COPA?
For which scenarios account based COPA used and for which scenarios costing based copa used.
please guide me
sateesh

HI
Costing-based Profitability Analysis is the form of profitability analysis that groups costs and revenues according to value fields and costing-based valuation approaches, both of which you can define yourself. It guarantees you access at all times to a complete, short-term profitability report.
Account-based Profitability Analysis is a form of profitability analysis organized in accounts and using an account-based valuation approach. The distinguishing characteristic of this form is its use of cost and revenue elements. It provides you with a profitability report that is permanently reconciled with financial accounting
Regards,
Vijayanand Sankaran

Difference between char and varchar, also the difference between varchar2

Hi,
Can anyone explain me the difference between char and varchar, and also the difference between varchar and varchar2...

Varchar2 is variable width character data type, so if you define column with width 20 and insert only one character to tis column only, one character will be stored in database. Char is not variable width so when you define column with width 20 and insert one character to this column it will be right padded with 19 spaces to desired length, so you will store 20 characters in the dattabase (follow the example 1). Varchar data type from Oracle 9i is automaticlly promoted to varchar2 (follow example 2)
Example 1:
SQL> create table tchar(text1 char(10), text2 varchar2(10))
2 /
Table created.
SQL> insert into tchar values('krystian','krystian')
2 /
1 row created.
SQL> select text1, length(text1), text2, length(text2)
2 from tchar
3 /
TEXT1 LENGTH(TEXT1) TEXT2 LENGTH(TEXT2)
krystian 10 krystian 8
Example 2:
create table tvarchar(text varchar(10))
SQL> select table_name,column_name,data_type
2 from user_tab_columns
3 where table_name = 'TVARCHAR'
4 /
TABLE_NAME COLUMN_NAME DATA_TYPE
TVARCHAR TEXT VARCHAR2
Best Regards
Krystian Zieja / mob

Difference between CHAR and VARCHAR2 datatype

Difference between CHAR and VARCHAR2 datatype
CHAR datatype
If you have an employee name column with size 10; ename CHAR(10) and If a column value 'JOHN' is inserted, 6 empty spaces will be inserted to the right of the value. If this was a VARCHAR column; ename VARCHAR2(10). How would it handle the column value 'JOHN' ?

The CHAR datatype stores fixed-length character strings, and Oracle compares CHAR values using blank-padded comparison semantics.
Where as the VARCHAR2 datatype stores variable-length character strings, and Oracle compares VARCHAR2 values using nonpadded comparison semantics.
This is important when comparing or joining on the columns having these datatypes;
SQL*Plus: Release 10.2.0.1.0 - Production on Pzt Au 6 09:16:45 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> conn hr/hr
Connected.
SQL> set serveroutput on
SQL> DECLARE
2 last_name1 VARCHAR2(10) := 'TONGUC';
3 last_name2 CHAR(10) := 'TONGUC';
4 BEGIN
5 IF last_name1 = last_name2 THEN
6 DBMS_OUTPUT.PUT_LINE ( '-' || last_name1 || '- is equal to -' || last_name2
|| '-');
7 ELSE
8 DBMS_OUTPUT.PUT_LINE ( '-' || last_name1 || '- is NOT equal to -' || last_n
ame2 || '-');
9 END IF;
10 END;
11 /
-TONGUC- is NOT equal to -TONGUC -
PL/SQL procedure successfully completed.
SQL> DECLARE
2 last_name1 CHAR(6) := 'TONGUC';
3 last_name2 CHAR(10) := 'TONGUC';
4 BEGIN
5 IF last_name1 = last_name2 THEN
6 DBMS_OUTPUT.PUT_LINE ( '-' || last_name1 || '- is equal to -' || last_name2
|| '-');
7 ELSE
8 DBMS_OUTPUT.PUT_LINE ( '-' || last_name1 || '- is NOT equal to -' || last_n
ame2 || '-');
9 END IF;
10 END;
11 /
-TONGUC- is equal to -TONGUC -
PL/SQL procedure successfully completed.
Also you may want to read related asktom thread - "Char Vs Varchar" http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:1542606219593
and http://tahitiviews.blogspot.com/2007/05/less-is-more-more-or-less.html
Best regards.

What's the difference between "Full Name" and "Account Name"

Just re-install a new OS X Lion. On the "Create Your Computer Account" screen, what's the difference between "Full Name" and "Account Name"?

Your computer name by default would be "John David Appleseed's Macbook Pro"
But you can always change that in System Preferences->Sharing
And yes, the first account you set up will be an administrator.

Difference in Cash Balance in Cash Journal and Cash GL Account

dear friends,
Can somebody tell me the reason and solution to following problem -
1. User entered on Cash Payment ( FBCJ ) entry for Vendor with TDS activated.
2. Due to some mistake in amount , he reversed the same ( FB08 ) , however amount reversed in Cash GL and TDS GL was wrong / was not same as per original document.
3. Since it give the rise to difference in balance of Cash as per GL Account and Cash Journal , we passed 2 more entries ,
1. FBCJ - Cash Receipt ( for differential amt )
                      Cash Journal .... Dr. ....
                                To intermediate account
2. F-02 - Journal entry - for differential amt.
                      Intermediate account .....
                                    To Cash GL Account
However still problem persists. Can anybody find out reason and solution for this.
Thanks....

Hi P S,
Firstly, In cash journal the entries flow FI-BL (Bank Accounting - Sub-module) to FI and gets updated in GL Account. That is why in the GL master master record of cash journal account, you see the "Post automatically only" option ticked.
The solution for you problem is that
1. First reverse the f-02 entry by fb08. This will reverse the entry which has effected only FI-GL.
2. Go to cash journal wrong (original) entry (FBCJ) and select the entry and delete the transaction through delete icon on left hand bottom.
3. This will reverse the entry in FI-GL.
4. Pass fresh entry in FBCJ with correct amount.
Hope this will help you... Pls assign points if helpful.
Regards,
Vinay

Difference between Invoice Date, GL Date and Accounting Date Oracle AP

Hello,
I have a question that might help a lot of people too later.
I tried to run these queries
select aia.INVOICE_ID
from AP_INVOICES_ALL aia, AP_INVOICE_DISTRIBUTIONS_ALL aida
where aia.INVOICE_ID = aida.INVOICE_ID
and aia.INVOICE_DATE <> aida.ACCOUNTING_DATE
select aia.INVOICE_ID
from AP_INVOICES_ALL aia, AP_INVOICE_DISTRIBUTIONS_ALL aida
where aia.INVOICE_ID = aida.INVOICE_ID
and aia.GL_DATE <> aida.ACCOUNTING_DATE
I can see that there are lot of results for these queries, where the Invoice Date is not equal to the Accounting date and the GL_Date of an invoice is not equal to the accounting date in the distributions table.
So, what is the difference between these dates.
And if I had to take the Invoice Accounting document entry date, which date do i have to take for these invoices in AP
Thanks
Bob

Hi
Let me try to explain this with an example.
Suppose I buy some stationary from a vendor and he provides me with a detailed invoice of the goods puchased.
In this case the invoice will always have a date printed on it and this date should ideally be entered in the invoice date at AP_INVOICES_ALL level.
Now suppose the invoice happens to be received by me in february and for some reason I could not capture the invoice in my books in february and made a provision for the liabilities and close the books.
However in march i want to book the invoice say on 10th of march in my books and pay the vendor the amount payable.(I Have to reverse the already provided liability in march to reverse the accounting effect).
In this case my book entry date of invoice is the accounting date i.e. 10 March.
In case of oracle, the accounting is maintained so that the invoice header hits the liability account while the invoice distribution hits the charge account(expense account so to say). And to gain more flexibility oracle provides date in both header and distributions to provide an option of booking liability and charge on different dates..
As per the 11i checks there is no check on any of these dates except that accounting date at header and ditribution level must be in an open AP and GL period.
Thanks
MAV.

Difference B/W Account Analysis - (180 Char) and Account Analysis report

Similar Messages

Maybe you are looking for