Difference between 3.0b, 3.1c & 3.5 sap material

Hi Gurus,
I have 3.0b sap material. for 3.5 do we have seperate material available?
points will be assigned accordingly..
vsn.

Hi VSN,
Are you looking for:
http://help.sap.com/saphelp_nw04/helpdata/en/49/7e960481916448b20134d471d36a6b/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm

Similar Messages

What is the difference between local printing and remote printing in SAP

Hello Nation,
I would like to know what is the difference between local printing and remote printing in SAP and in what scenarios they are used ?
1.What is local printing in SAP ?
2.What is Remote Printing in SAP?
3.what is the difference between local printing and remote printing in SAP ?
Thank you in Advance.
Regards,
-Mohamed Naveen.

Hi,
This is SAP Business one system administration forum. Please find correct forum and repost your discussion to get quick response.
Please close this thread here with helpful answer.
Thanks & Regards,
Nagarajan

Difference between Bom of semi-finished goods & f/g material master

Dear all,
What is the Difference between Bom of semi-finished goods & f/g material master ?
Just I don't know wt r we maintained in s/f BoM ?
Regards,
sahoo

There is no difference in SFg and FG Material master. some time Straegy group will differ.
FOR BOM
create a seperate Bom For SFG anf FG
In SFG BOM - maintain what are the materials required to make the FG in Compnent and the quantity.
In FG BOM- maintain SFG material as component and give the quantity, item category and other raw material or SFG
Regards,
sundaresan
Edited by: Sundaresan . E. V on Dec 24, 2009 5:24 PM

Difference Between Current version & All Version in DMS in Material Master

Hello All
Could any one tell me the Difference between Current Version & All version of DMS in Material Master (in /MM02 transaction)Additional Data tab where Documents are attached in Document Data Tab.
I am unable to see all Documents in "current Version" which are attached in "All Version" option in /MM02 transaction Additional Data Tab in Document Data.
How to display all DMS in current version which I can see in all version? Is there any configuration available in DMS?
Thanks in Advance.
Waiting for your valuable reply.

Hi,
01) I have attached the 02 DOCs at atime in material Master additional Data tab in all version option. First Doc type is ZDR & 02nd is ZTS and save my entries.
02) Then I go to /MM02 Transaction ..So which Doc type will appeared in current version.
   In current version you will see 2 entries as below
Doc type                                                                Version
   ZDR     <Mat number>        000     00
   ZTS     <MAt number>     000     00
03) 03rd step When I go to /MM02 transaction & attached 03rd same ZTS doc type doc whether this doc can be dipsly in current version or not after saving my entry.
     In current version you will see following entries
Doc type                                                                Version
   ZDR     <Mat number>        000     00
   ZTS     <MAt number>     000     01
04) If I go to /MM02 transaction & attached 04th Doc (Doc type is ZAC) & save my entry. Can I see this Doc in current version when I once again go to /MM transaction.
     In current version you will see the following entries.
Doc type                                                                Version
   ZDR     <Mat number>        000     00
   ZTS     <MAt number>     000     01
   ZAC           <Mat Number>                    000               00
Regards,
Deepak Kori

Exact Difference between Non Stock NLAG and Non Valuated UNBW Materia type

Dear All
What is the Exact Difference between Non Stock NLAG and Non Valuated UNBW Materia type?
I tried creating Purchase Order and found that accouting doc got created at both times and stock was not updated in MMBE for both material types.
Regards

Hi,
non-valuated material (Material Type UNBW):
This type of material is managed on a quantity basis, but not on a value basis. This makes sense for materials of low value, stocks of which nevertheless have to be monitored (for example, operating manuals).
Non-stock material (NLAG) (Material Type NLAG):
Inventory management is not possible for these materials either on a quantity or value basis. For frequently required consumables, the use of this material type nevertheless enables you to store the information required to create
purchasing documents (such as texts and units of measure).
When a material is procured directly for consumption, no material master record is necessary. In connection with consumable materials, you can distinguish between the following cases:
Consumable material without material master record
Consumable material with material master record that is not subject to
inventory management (on either a quantity or value basis)
Consumable material with material master record that is subject to inventory management on a quantity, but not a value, basis
Regards,
Pardeep malik

Difference between normal Costing run and Costing run in Material Ledger

Hi everybody,
I have a question i wanted to know why we implement Material Ledger .
If material ledger is for settling variances on material then that is also possible without material ledger
Please clear the doubt what is different in ML as compared to normal costing run
thanks in advance
Regards
Deepa

Costing run is to calculate the std cost estimate of materials and Material Ledger costing run is to calculate Actual cost of production of materials.

Difference between unit testing and integration testing

What is the difference between unit testing and integration testing in SAP? Is unit testing takes place in Dev client and integration testing takes place in QA system?
Please clarify
thanks

Hello Krishen,
unit testing means veryfiingsmall / the smallet pieces of software, while integration testing checks the overall functionality of applications. Within the AS ABAP the tool ECATT + manual tests is used for integration tests and the ABAP Unit language integration for unit testing.
When, Who, Where tests are carried out is ultimately a personal decision. As unit tests are operate even under heavy development they are often the first choice for developers, but the unit tests can also serve for regression tests over a long period. Integration tests tend too be created and executed in later stages as they require often a certain majurity of the software under test.
Beside the mentioned links you may check out ABAP Unit infos also in the Wiki.
https://wiki.sdn.sap.com/wiki/display/HOME/ABAP+Unit
Best Regards
Klaus

Difference between task request and change request

What is the difference between task request and change request during sap implementation. In general how many tasks will generate during a normal company inmplementation by any functional consultant?

Hi,
Change request and task request are same.But generally change request is generated during newly created objects or reports that are transported and task request is used when u regenerate the change request by modifying that object again and transporting it in new change request.
A particular change request may contain multiple number of task request but that number depends upon number of objects u transfer during generation and transportation.
Pls do reward points if ans is useful.
Regards,
Suhas.

Differences between sapr3 and isu

Hi All,
Can anybody explain differences between isu and sapr3
Thanks,
Satya

Hi Satya ,
SAP R3 is for the General industry/Organization.SAP after studying and Analyzing the Fortune 500 Companies came up with the Best Process that suits most of the Industries however For few of the Industry Segments SAP came up with its VERTICALS like IS-Retail,IS-Utilities,Etc which will suit the industry requirement.
Few of the Process and Configurations in IS-Utility will differ from that of the SAP-R3
Rgds
SVU123

How to find outthe difference between the two serivce patch of Netweaver04s

Hi,
We have installed NetWeaver04s with sp13 patch. We want to upgrade this to latest patch avaiable on sap market place. I could see sp22 is the latest patch. I know all the procedure to download the patch. But before downloading I have to find out the difference between the latest patch available i.e. SP22 and the current patch installed i.e. SP13.
Could anybody guide me how to see the difference between any two patches avaiable on the SAP market place?
Let me know if you need more information on this.
--Chandan

Hi
For single patch info, if you click the INFO link in window from where you download the patch. You will get the information related to that patch.
eg
SAPJEE05_0-10003469.SCA SP05 for SAP J2EE Engine 7.00 0 Info 53976 14.12.2005
Try out this, can help you (some navigation required)
http://service.sap.com/sp-stack
Select your Product:
Select Source and Target Release and Componenets. Click Next
Navigate under "Additional Information"
eg:
SAP NetWeaver 7.0 (2004s) Support Package Stacks
can be found on the SAP NetWeaver 7.0 (2004s) Support Package Stacks Info-Pages for each available Support Package Stack
In the next window; again navigate further: you can find like this
New functionality available with the relevant SP Stack is described in Section "Release Notes" as part of the SAP Library. Please refer to SAP Help Portal -> SAP NetWeaver 7.0 -> Release Notes. Each scenario folder contains the new functionality available for each SP Stack.
eg.
http://help.sap.com/saphelp_nw04s/helpdata/en/5b/8c3842bb58f83ae10000000a1550b0/frameset.htm
This would give you information of changes in different releases.

DIFFERENCE BETWEEN TWO INTERNAL TABLES,THESE TABLES HAVE SAME FILEDS

TYPES: BEGIN OF
TY_AS_UP,
WERKS LIKE
                  MARC-WERKS,
MATNR LIKE
                   MARC-MATNR,
LGORT LIKE
                  MARD-LGORT,
LABST(13) TYPE C,
(MARD-LABST)
END OF TY_AS_UP.
TABLES:
1) FLAT FILE DATA.:
DATA: WA_FILEDATA
             TYPE TY_AS_UP,
I_FILEDATA TYPE STANDARD TABLE OF TY_AS_UP INITIAL SIZE 0.
2) SAP DATA (SELECT QUREY)
DATA: WA_SAPDATA
              TYPE TY_AS_UP,
I_SAPDATA TYPE STANDARD TABLE OF TY_AS_UP INITIAL SIZE 0.
NOTE:
I brought data to above table(2) from two internal tables I_MARC and I_MARD .
My requirement is to display difference between tables 1) and 2) based on quantity field(MARD-LABST)..
report layout:
      top-of-page
plant diff qty distri.qty   sap
01       -20       30        50
        end-of-page
          page no 1.
Kindly help me,it is urgent

hi micky,
     thanks for your solution.
another problem:
I could not understand below
requirement, could you please
explain me.
8)     Format the report based on the display options specified in the selection screen.
a)     Display option EQUAL IN QTY show report lines where the difference is between the distributor file quantity and the SAP quantity is 0.
b)     Display option DIFFERENCE IN QTY show report lines where the difference between the distributor file quantity and the SAP quantity is not 0.
c)     If both options are selected, show report lines where the difference is both 0 and not 0.
d)     Display SKUs in the distributors file not found in SAP as Missing SKUs
regards,
saritha.

Difference between user exists&badi's

difference between user exists&badi's

Hi, this may help you.
Check this link to learn more about differences between user-exits and badis:
http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
Difference Between BADI and User Exits
Business Add-Ins are a new SAP enhancement technique based on ABAP Objects. They can be inserted into the SAP System to accommodate user requirements too specific to be included in the standard delivery. Since specific industries often require special functions, SAP allows you to predefine these points in your software.
As with customer exits two different views are available:
In the definition view, an application programmer predefines exit points in a source that allow specific industry sectors, partners, and customers to attach additional software to standard SAP source code without having to modify the original object.
In the implementation view, the users of Business Add-Ins can customize the logic they need or use a standard logic if one is available.
In contrast to customer exits, Business Add-Ins no longer assume a two-level infrastructure (SAP and customer solutions), but instead allow for a multi-level system landscape (SAP, partner, and customer solutions, as well as country versions, industry solutions, and the like). Definitions and implementations of Business Add-Ins can be created at each level within such a system infrastructure.
SAP guarantees the upward compatibility of all Business Add-In interfaces. Release upgrades do not affect enhancement calls from within the standard software nor do they affect the validity of call interfaces. You do not have to register Business Add-Ins in SSCR.
The Business Add-In enhancement technique differentiates between enhancements that can only be implemented once and enhancements that can be used actively by any number of customers at the same time. In addition, Business Add-Ins can be defined according to filter values. This allows you to control add-in implementation and make it dependent on specific criteria (on a specific Country value, for example).
All ABAP sources, screens, GUIs, and table interfaces created using this enhancement technique are defined in a manner that allows customers to include their own enhancements in the standard. A single Business Add-In contains all of the interfaces necessary to implement a specific task.
The actual program code is enhanced using ABAP Objects. In order to better understand the programming techniques behind the Business Add-In enhancement concept, SAP recommends reading the section on ABAP Objects.
What is difference between badi and user-exists?
What is difference between enhancements and user-exists? and what is the full form of BADI?
I have another doubt in BDC IN BDC WE HAVE MSEGCALL (i did not remember the > correct name) where the error logs are stored, MSEGCALL is a table or structure.
What is the system landscape?
1) Difference between BADI and USER-EXIT.
i) BADI's can be used any number of times, where as USER-EXITS can be used only one time.
Ex:- if your assigning a USER-EXIT to a project in (CMOD), then you can not assign the same to other project.
ii) BADI's are oops based.
2) About 'BDCMSGCOLL' it is a structure. Used for finding error records.
3) Full form of BADI 'Business addins'.
3) System land scape will be depends on your project
Ex:- 'Development server'>'Quality server'-> 'Production server'......
Reward If Helpful.
Regards Madhu.

Difference between sales order and credit order

Hi friends,
can any explain about difference between sales order and credit order in SAP.
Thanks and Regards.

Hi Narayana,
This Depends upon your Client Requirement.
If you are using the Credit Management to your client. then you maintain certain checks like Simple Credit, Automatic Credit at Sales Order Level.
If the Client want a seperate Document type for Credit Sales and Normal Sales if having Purpose.
Other wise you can use only one Document type for both,because in Standard Sap, For Cash Sale have seperate Document type.
Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

Difference between MRP and MPS..

Hi ALL,
I am aware that MPS planning is done for the materials which are high-valued....Main aim is to reduce costs and to increase planning stability...
Also these type of Materials can be planned using MRP...
Then why do we go for MPS Planning only...?
Thanks..
Regards,
Ameya K.

Hi Ameya,
MPS
1.In the MPS run, the materials marked MRP Type as MPS (ie. M0,M1) only will be included . The planned orders are created at the MPS Material level only.
2.The BOM is exploded for next one level down only.Further level will not be exploded,that means Dependent requirements are created for the BOM components one level down, further level will not processed.
This allows MRP controller can ensure that the MPS items are correctly planned before any MRP run takes place. This allows the planner to check and change the planning result, before any MRP run takes place for other materials.
For example,consider this business scenario, suppose one wants to do planning for finished Goods once pre week, but it is necessary to do planning for their components on daily basis.
so for this exmple, you can define Finished materials with MRP type as MPS and all the components with MRP type as MRP.
MPS run is carried out before the MRP run. So that the Planner can ensure planning result before the MRP run.
MRP.
MRP Run will plan all BOM level of Materials.
i hope i have tried to clear your doubt some what.
for more information please see following links
http://www.sap-img.com/production/difference-between-mrp-vs-mps.htm
http://www.sap-basis-abap.com/sappq002.htm
thanks
pradeep.

What's the difference between trace and log in XI?

Hi all,
On both J2EE and ABAP, there are both tracing and logging functionalities. Can anyone explain me the difference between trace and logging?
Regards,
Hui

From SAP Notes
Log file:
A log file contains generally intelligible information for system administrators. The information is sorted by categories and is used for system monitoring. Problem sources or critical information about the status of the system are logged in this file. If error messages occur, you can determine the software component that has caused the error using the location. If the log message does not provide enough details to eliminate the problem, you can find more detailed information about the error in the trace file.
The log file is located in the file system under
"/usr/sap/[SID]/[instance]/j2ee/cluster/server[N]/log/applications.[n].log" for every N server node.
Access the file with the log viewer service of the J2EE visual administrator or with the standalone log viewer.
Trace file:
A trace file contains detailed information for developers. This information can be very cryptic and extensive. It is sorted by location, which means by software packages in the Java environment, for example, "com.sap.aii.af". The trace file is used to analyze runtime errors. By setting a specific trace level for specific locations, you can analyze the behavior of individual code segments on class and method level. The file should be analyzed by SAP developers or experienced administrators.
The trace file is located in the file system under
"/usr/sap/[SID]/[instance]/j2ee/cluster/server[N]/log/defaultTrace.[x].trc" for each N server node.
Access the file with the log viewer service of the J2EE visual administrator or with the standalone log viewer.
Regards,
Prateek

Difference between 3.0b, 3.1c & 3.5 sap material

Similar Messages

Maybe you are looking for